qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Yong-Xuan Wang <yongxuan.wang@sifive.com>
To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Cc: rkanwal@rivosinc.com, anup@brainfault.org,
	dbarboza@ventanamicro.com, ajones@ventanamicro.com,
	atishp@atishpatra.org, vincent.chen@sifive.com,
	greentime.hu@sifive.com, frank.chang@sifive.com,
	jim.shu@sifive.com, Yong-Xuan Wang <yongxuan.wang@sifive.com>,
	Alistair Francis <alistair.francis@wdc.com>,
	Palmer Dabbelt <palmer@rivosinc.com>,
	Mayuresh Chitale <mchitale@ventanamicro.com>
Subject: [PATCH v6 4/5] target/riscv: update APLIC and IMSIC to support KVM AIA
Date: Fri, 14 Jul 2023 08:44:26 +0000	[thread overview]
Message-ID: <20230714084429.22349-5-yongxuan.wang@sifive.com> (raw)
In-Reply-To: <20230714084429.22349-1-yongxuan.wang@sifive.com>

KVM AIA can't emulate APLIC only. When "aia=aplic" parameter is passed,
APLIC devices is emulated by QEMU. For "aia=aplic-imsic", remove the
mmio operations of APLIC when using KVM AIA and send wired interrupt
signal via KVM_IRQ_LINE API.
After KVM AIA enabled, MSI messages are delivered by KVM_SIGNAL_MSI API
when the IMSICs receive mmio write requests.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
 hw/intc/riscv_aplic.c | 56 ++++++++++++++++++++++++++++++-------------
 hw/intc/riscv_imsic.c | 25 +++++++++++++++----
 2 files changed, 61 insertions(+), 20 deletions(-)

diff --git a/hw/intc/riscv_aplic.c b/hw/intc/riscv_aplic.c
index 4bdc6a5d1a..592c3ce768 100644
--- a/hw/intc/riscv_aplic.c
+++ b/hw/intc/riscv_aplic.c
@@ -31,6 +31,7 @@
 #include "hw/irq.h"
 #include "target/riscv/cpu.h"
 #include "sysemu/sysemu.h"
+#include "sysemu/kvm.h"
 #include "migration/vmstate.h"
 
 #define APLIC_MAX_IDC                  (1UL << 14)
@@ -148,6 +149,15 @@
 
 #define APLIC_IDC_CLAIMI               0x1c
 
+/*
+ * KVM AIA only supports APLIC MSI, fallback to QEMU emulation if we want to use
+ * APLIC Wired.
+ */
+static bool is_kvm_aia(bool msimode)
+{
+    return kvm_irqchip_in_kernel() && msimode;
+}
+
 static uint32_t riscv_aplic_read_input_word(RISCVAPLICState *aplic,
                                             uint32_t word)
 {
@@ -471,6 +481,11 @@ static uint32_t riscv_aplic_idc_claimi(RISCVAPLICState *aplic, uint32_t idc)
     return topi;
 }
 
+static void riscv_kvm_aplic_request(void *opaque, int irq, int level)
+{
+    kvm_set_irq(kvm_state, irq, !!level);
+}
+
 static void riscv_aplic_request(void *opaque, int irq, int level)
 {
     bool update = false;
@@ -801,29 +816,35 @@ static void riscv_aplic_realize(DeviceState *dev, Error **errp)
     uint32_t i;
     RISCVAPLICState *aplic = RISCV_APLIC(dev);
 
-    aplic->bitfield_words = (aplic->num_irqs + 31) >> 5;
-    aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs);
-    aplic->state = g_new0(uint32_t, aplic->num_irqs);
-    aplic->target = g_new0(uint32_t, aplic->num_irqs);
-    if (!aplic->msimode) {
-        for (i = 0; i < aplic->num_irqs; i++) {
-            aplic->target[i] = 1;
+    if (!is_kvm_aia(aplic->msimode)) {
+        aplic->bitfield_words = (aplic->num_irqs + 31) >> 5;
+        aplic->sourcecfg = g_new0(uint32_t, aplic->num_irqs);
+        aplic->state = g_new0(uint32_t, aplic->num_irqs);
+        aplic->target = g_new0(uint32_t, aplic->num_irqs);
+        if (!aplic->msimode) {
+            for (i = 0; i < aplic->num_irqs; i++) {
+                aplic->target[i] = 1;
+            }
         }
-    }
-    aplic->idelivery = g_new0(uint32_t, aplic->num_harts);
-    aplic->iforce = g_new0(uint32_t, aplic->num_harts);
-    aplic->ithreshold = g_new0(uint32_t, aplic->num_harts);
+        aplic->idelivery = g_new0(uint32_t, aplic->num_harts);
+        aplic->iforce = g_new0(uint32_t, aplic->num_harts);
+        aplic->ithreshold = g_new0(uint32_t, aplic->num_harts);
 
-    memory_region_init_io(&aplic->mmio, OBJECT(dev), &riscv_aplic_ops, aplic,
-                          TYPE_RISCV_APLIC, aplic->aperture_size);
-    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &aplic->mmio);
+        memory_region_init_io(&aplic->mmio, OBJECT(dev), &riscv_aplic_ops,
+                              aplic, TYPE_RISCV_APLIC, aplic->aperture_size);
+        sysbus_init_mmio(SYS_BUS_DEVICE(dev), &aplic->mmio);
+    }
 
     /*
      * Only root APLICs have hardware IRQ lines. All non-root APLICs
      * have IRQ lines delegated by their parent APLIC.
      */
     if (!aplic->parent) {
-        qdev_init_gpio_in(dev, riscv_aplic_request, aplic->num_irqs);
+        if (is_kvm_aia(aplic->msimode)) {
+            qdev_init_gpio_in(dev, riscv_kvm_aplic_request, aplic->num_irqs);
+        } else {
+            qdev_init_gpio_in(dev, riscv_aplic_request, aplic->num_irqs);
+        }
     }
 
     /* Create output IRQ lines for non-MSI mode */
@@ -958,7 +979,10 @@ DeviceState *riscv_aplic_create(hwaddr addr, hwaddr size,
     qdev_prop_set_bit(dev, "mmode", mmode);
 
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
+
+    if (!is_kvm_aia(msimode)) {
+        sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
+    }
 
     if (parent) {
         riscv_aplic_add_child(parent, dev);
diff --git a/hw/intc/riscv_imsic.c b/hw/intc/riscv_imsic.c
index fea3385b51..760dbddcf7 100644
--- a/hw/intc/riscv_imsic.c
+++ b/hw/intc/riscv_imsic.c
@@ -32,6 +32,7 @@
 #include "target/riscv/cpu.h"
 #include "target/riscv/cpu_bits.h"
 #include "sysemu/sysemu.h"
+#include "sysemu/kvm.h"
 #include "migration/vmstate.h"
 
 #define IMSIC_MMIO_PAGE_LE             0x00
@@ -283,6 +284,20 @@ static void riscv_imsic_write(void *opaque, hwaddr addr, uint64_t value,
         goto err;
     }
 
+#if defined(CONFIG_KVM)
+    if (kvm_irqchip_in_kernel()) {
+        struct kvm_msi msi;
+
+        msi.address_lo = extract64(imsic->mmio.addr + addr, 0, 32);
+        msi.address_hi = extract64(imsic->mmio.addr + addr, 32, 32);
+        msi.data = le32_to_cpu(value);
+
+        kvm_vm_ioctl(kvm_state, KVM_SIGNAL_MSI, &msi);
+
+        return;
+    }
+#endif
+
     /* Writes only supported for MSI little-endian registers */
     page = addr >> IMSIC_MMIO_PAGE_SHIFT;
     if ((addr & (IMSIC_MMIO_PAGE_SZ - 1)) == IMSIC_MMIO_PAGE_LE) {
@@ -320,10 +335,12 @@ static void riscv_imsic_realize(DeviceState *dev, Error **errp)
     CPUState *cpu = cpu_by_arch_id(imsic->hartid);
     CPURISCVState *env = cpu ? cpu->env_ptr : NULL;
 
-    imsic->num_eistate = imsic->num_pages * imsic->num_irqs;
-    imsic->eidelivery = g_new0(uint32_t, imsic->num_pages);
-    imsic->eithreshold = g_new0(uint32_t, imsic->num_pages);
-    imsic->eistate = g_new0(uint32_t, imsic->num_eistate);
+    if (!kvm_irqchip_in_kernel()) {
+        imsic->num_eistate = imsic->num_pages * imsic->num_irqs;
+        imsic->eidelivery = g_new0(uint32_t, imsic->num_pages);
+        imsic->eithreshold = g_new0(uint32_t, imsic->num_pages);
+        imsic->eistate = g_new0(uint32_t, imsic->num_eistate);
+    }
 
     memory_region_init_io(&imsic->mmio, OBJECT(dev), &riscv_imsic_ops,
                           imsic, TYPE_RISCV_IMSIC,
-- 
2.17.1



  parent reply	other threads:[~2023-07-14  8:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-14  8:44 [PATCH v6 0/5] Add RISC-V KVM AIA Support Yong-Xuan Wang
2023-07-14  8:44 ` [PATCH v6 1/5] target/riscv: support the AIA device emulation with KVM enabled Yong-Xuan Wang
2023-07-14  8:44 ` [PATCH v6 2/5] target/riscv: check the in-kernel irqchip support Yong-Xuan Wang
2023-07-14  8:44 ` [PATCH v6 3/5] target/riscv: Create an KVM AIA irqchip Yong-Xuan Wang
2023-07-21 17:41   ` Andrew Jones
2023-07-14  8:44 ` Yong-Xuan Wang [this message]
2023-07-14  8:44 ` [PATCH v6 5/5] target/riscv: select KVM AIA in riscv virt machine Yong-Xuan Wang
2023-07-21 18:06   ` Andrew Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230714084429.22349-5-yongxuan.wang@sifive.com \
    --to=yongxuan.wang@sifive.com \
    --cc=ajones@ventanamicro.com \
    --cc=alistair.francis@wdc.com \
    --cc=anup@brainfault.org \
    --cc=atishp@atishpatra.org \
    --cc=dbarboza@ventanamicro.com \
    --cc=frank.chang@sifive.com \
    --cc=greentime.hu@sifive.com \
    --cc=jim.shu@sifive.com \
    --cc=mchitale@ventanamicro.com \
    --cc=palmer@rivosinc.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=rkanwal@rivosinc.com \
    --cc=vincent.chen@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).