From: Peter Maydell <peter.maydell@linaro.org>
To: Sergey Fedorov <serge.fdrv@gmail.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
qemu-arm <qemu-arm@nongnu.org>,
QEMU Developers <qemu-devel@nongnu.org>,
Patch Tracking <patches@linaro.org>
Subject: Re: [Qemu-devel] [PATCH 5/6] target-arm: Implement MDCR_EL2.TDA and MDCR_EL2.TDA traps
Date: Mon, 8 Feb 2016 16:38:18 +0000 [thread overview]
Message-ID: <CAFEAcA9v2KHF92omDQ3EzhdGsO=Vyt37zJ7REp=23sVJeQ1BaA@mail.gmail.com> (raw)
In-Reply-To: <56B8C2EE.5090700@gmail.com>
On 8 February 2016 at 16:31, Sergey Fedorov <serge.fdrv@gmail.com> wrote:
> One of the MDCR_EL2's should be MDCR_EL3 instead.
Oops, yes :-)
> On 05.02.2016 19:45, Peter Maydell wrote:
>> Implement the debug register traps controlled by MDCR_EL2.TDA
>> and MDCR_EL3.TDA.
>>
>> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
>> ---
>> target-arm/helper.c | 39 ++++++++++++++++++++++++++++++---------
>> 1 file changed, 30 insertions(+), 9 deletions(-)
>>
>> diff --git a/target-arm/helper.c b/target-arm/helper.c
>> index 8c2adbc..064b415 100644
>> --- a/target-arm/helper.c
>> +++ b/target-arm/helper.c
>> @@ -420,6 +420,24 @@ static CPAccessResult access_tdra(CPUARMState *env, const ARMCPRegInfo *ri,
>> return CP_ACCESS_OK;
>> }
>>
>> +/* Check for traps to general debug registers, which are controlled
>> + * by MDCR_EL2.TDA for EL2 and MDCR_EL3.TDA for EL3.
>> + */
>> +static CPAccessResult access_tda(CPUARMState *env, const ARMCPRegInfo *ri,
>> + bool isread)
>> +{
>> + int el = arm_current_el(env);
>> +
>> + if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TDA)
>> + && !arm_is_secure_below_el3(env)) {
>> + return CP_ACCESS_TRAP_EL2;
>> + }
>> + if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDA)) {
>> + return CP_ACCESS_TRAP_EL3;
>> + }
>> + return CP_ACCESS_OK;
>> +}
>> +
>> static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
>> {
>> ARMCPU *cpu = arm_env_get_cpu(env);
>> @@ -3385,7 +3403,8 @@ static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = {
>> .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
>> { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH,
>> .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1,
>> - .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
>> + .access = PL2_RW, .accessfn = access_tda,
>> + .type = ARM_CP_CONST, .resetvalue = 0 },
>> { .name = "HPFAR_EL2", .state = ARM_CP_STATE_BOTH,
>> .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4,
>> .access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
>> @@ -3804,7 +3823,7 @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
>> /* Monitor debug system control register; the 32-bit alias is DBGDSCRext. */
>> { .name = "MDSCR_EL1", .state = ARM_CP_STATE_BOTH,
>> .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 2,
>> - .access = PL1_RW,
>> + .access = PL1_RW, .accessfn = access_tda,
>> .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1),
>> .resetvalue = 0 },
>> /* MDCCSR_EL0, aka DBGDSCRint. This is a read-only mirror of MDSCR_EL1.
>> @@ -3813,7 +3832,7 @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
>> { .name = "MDCCSR_EL0", .state = ARM_CP_STATE_BOTH,
>> .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0,
>> .type = ARM_CP_ALIAS,
>> - .access = PL1_R,
>> + .access = PL1_R, .accessfn = access_tda,
>
> From ARMv8 ARM rev. A.h: "If MDSCR_EL1.TDCC==1, EL0 read accesses to
> this register are trapped to EL1." But it seems like we just don't
> implement "Config-RO for EL0" so far.
Yes. There's a comment about this, though it's just outside the
context region that diff has produced.
> Maybe it's worth to implement a
> separate function for checks controlled by MDSCR_EL1.TDCC?
I think that's a separate issue from the EL2/EL3 traps and
should go in its own patch. This series is just trying to get
EL3 right.
thanks
-- PMM
next prev parent reply other threads:[~2016-02-08 16:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-05 16:44 [Qemu-devel] [PATCH 0/6] target-arm: Implement various EL3 traps Peter Maydell
2016-02-05 16:44 ` [Qemu-devel] [PATCH 1/6] target-arm: correct CNTFRQ access rights Peter Maydell
2016-02-08 15:25 ` Sergey Fedorov
2016-02-08 15:30 ` Peter Maydell
2016-02-05 16:45 ` [Qemu-devel] [PATCH 2/6] target-arm: Fix handling of SCR.SMD Peter Maydell
2016-02-08 15:40 ` [Qemu-devel] [Qemu-arm] " Sergey Fedorov
2016-02-05 16:45 ` [Qemu-devel] [PATCH 3/6] target-arm: Implement MDCR_EL3.TDOSA and MDCR_EL2.TDOSA traps Peter Maydell
2016-02-08 15:49 ` [Qemu-devel] [Qemu-arm] " Sergey Fedorov
2016-02-05 16:45 ` [Qemu-devel] [PATCH 4/6] target-arm: Implement MDCR_EL2.TDRA traps Peter Maydell
2016-02-08 15:56 ` Sergey Fedorov
2016-02-05 16:45 ` [Qemu-devel] [PATCH 5/6] target-arm: Implement MDCR_EL2.TDA and MDCR_EL2.TDA traps Peter Maydell
2016-02-08 16:31 ` Sergey Fedorov
2016-02-08 16:38 ` Peter Maydell [this message]
2016-02-08 16:44 ` Sergey Fedorov
2016-02-05 16:45 ` [Qemu-devel] [PATCH 6/6] target-arm: Report correct syndrome for FPEXC32_EL2 traps Peter Maydell
2016-02-08 16:40 ` Sergey Fedorov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFEAcA9v2KHF92omDQ3EzhdGsO=Vyt37zJ7REp=23sVJeQ1BaA@mail.gmail.com' \
--to=peter.maydell@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=patches@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).