qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Alistair Francis <alistair23@gmail.com>
To: Bin Meng <bmeng.cn@gmail.com>
Cc: "open list:RISC-V" <qemu-riscv@nongnu.org>,
	Palmer Dabbelt <palmer@sifive.com>,
	Alistair Francis <Alistair.Francis@wdc.com>,
	"qemu-devel@nongnu.org Developers" <qemu-devel@nongnu.org>
Subject: Re: [Qemu-devel] [PATCH v5 21/30] riscv: sifive_u: Add PRCI block to the SoC
Date: Fri, 23 Aug 2019 16:52:58 -0700	[thread overview]
Message-ID: <CAKmqyKOQKTj4zOvVo5zaP4EprBka7R0RfD58MV_5a7C3ON_3LQ@mail.gmail.com> (raw)
In-Reply-To: <1566537069-22741-22-git-send-email-bmeng.cn@gmail.com>

On Thu, Aug 22, 2019 at 10:35 PM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> Add PRCI mmio base address and size mappings to sifive_u machine,
> and generate the corresponding device tree node.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

>
> ---
>
> Changes in v5:
> - create sifive_u_prci block directly in the machine codes, instead
>   of calling sifive_u_prci_create()
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
>  hw/riscv/sifive_u.c         | 24 +++++++++++++++++++++++-
>  include/hw/riscv/sifive_u.h |  3 +++
>  2 files changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
> index 08db741..c777d41 100644
> --- a/hw/riscv/sifive_u.c
> +++ b/hw/riscv/sifive_u.c
> @@ -9,6 +9,7 @@
>   * 0) UART
>   * 1) CLINT (Core Level Interruptor)
>   * 2) PLIC (Platform Level Interrupt Controller)
> + * 3) PRCI (Power, Reset, Clock, Interrupt)
>   *
>   * This board currently generates devicetree dynamically that indicates at least
>   * two harts and up to five harts.
> @@ -61,6 +62,7 @@ static const struct MemmapEntry {
>      [SIFIVE_U_MROM] =     {     0x1000,    0x11000 },
>      [SIFIVE_U_CLINT] =    {  0x2000000,    0x10000 },
>      [SIFIVE_U_PLIC] =     {  0xc000000,  0x4000000 },
> +    [SIFIVE_U_PRCI] =     { 0x10000000,     0x1000 },
>      [SIFIVE_U_UART0] =    { 0x10013000,     0x1000 },
>      [SIFIVE_U_UART1] =    { 0x10023000,     0x1000 },
>      [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
> @@ -78,7 +80,7 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      uint32_t *cells;
>      char *nodename;
>      char ethclk_names[] = "pclk\0hclk\0tx_clk";
> -    uint32_t plic_phandle, ethclk_phandle, phandle = 1;
> +    uint32_t plic_phandle, prci_phandle, ethclk_phandle, phandle = 1;
>      uint32_t uartclk_phandle;
>      uint32_t hfclk_phandle, rtcclk_phandle;
>
> @@ -189,6 +191,21 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
>      g_free(cells);
>      g_free(nodename);
>
> +    prci_phandle = phandle++;
> +    nodename = g_strdup_printf("/soc/clock-controller@%lx",
> +        (long)memmap[SIFIVE_U_PRCI].base);
> +    qemu_fdt_add_subnode(fdt, nodename);
> +    qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle);
> +    qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1);
> +    qemu_fdt_setprop_cells(fdt, nodename, "clocks",
> +        hfclk_phandle, rtcclk_phandle);
> +    qemu_fdt_setprop_cells(fdt, nodename, "reg",
> +        0x0, memmap[SIFIVE_U_PRCI].base,
> +        0x0, memmap[SIFIVE_U_PRCI].size);
> +    qemu_fdt_setprop_string(fdt, nodename, "compatible",
> +        "sifive,fu540-c000-prci");
> +    g_free(nodename);
> +
>      plic_phandle = phandle++;
>      cells =  g_new0(uint32_t, ms->smp.cpus * 4 - 2);
>      for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
> @@ -411,6 +428,8 @@ static void riscv_sifive_u_soc_init(Object *obj)
>                                  "cpu-type", &error_abort);
>      }
>
> +    sysbus_init_child_obj(obj, "prci", &s->prci, sizeof(s->prci),
> +                          TYPE_SIFIVE_U_PRCI);
>      sysbus_init_child_obj(obj, "gem", &s->gem, sizeof(s->gem),
>                            TYPE_CADENCE_GEM);
>  }
> @@ -484,6 +503,9 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, Error **errp)
>          memmap[SIFIVE_U_CLINT].size, ms->smp.cpus,
>          SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE);
>
> +    object_property_set_bool(OBJECT(&s->prci), true, "realized", &err);
> +    sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_PRCI].base);
> +
>      for (i = 0; i < SIFIVE_U_PLIC_NUM_SOURCES; i++) {
>          plic_gpios[i] = qdev_get_gpio_in(DEVICE(s->plic), i);
>      }
> diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
> index debbf28..2a023be 100644
> --- a/include/hw/riscv/sifive_u.h
> +++ b/include/hw/riscv/sifive_u.h
> @@ -21,6 +21,7 @@
>
>  #include "hw/net/cadence_gem.h"
>  #include "hw/riscv/sifive_cpu.h"
> +#include "hw/riscv/sifive_u_prci.h"
>
>  #define TYPE_RISCV_U_SOC "riscv.sifive.u.soc"
>  #define RISCV_U_SOC(obj) \
> @@ -36,6 +37,7 @@ typedef struct SiFiveUSoCState {
>      RISCVHartArrayState e_cpus;
>      RISCVHartArrayState u_cpus;
>      DeviceState *plic;
> +    SiFiveUPRCIState prci;
>      CadenceGEMState gem;
>  } SiFiveUSoCState;
>
> @@ -54,6 +56,7 @@ enum {
>      SIFIVE_U_MROM,
>      SIFIVE_U_CLINT,
>      SIFIVE_U_PLIC,
> +    SIFIVE_U_PRCI,
>      SIFIVE_U_UART0,
>      SIFIVE_U_UART1,
>      SIFIVE_U_DRAM,
> --
> 2.7.4
>
>


  reply	other threads:[~2019-08-24  0:16 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23  5:10 [Qemu-devel] [PATCH v5 00/30] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 01/30] riscv: hw: Remove superfluous "linux, phandle" property Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 02/30] riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 03/30] riscv: hw: Remove not needed PLIC properties in device tree Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 04/30] riscv: hw: Change create_fdt() to return void Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 05/30] riscv: hw: Change to use qemu_log_mask(LOG_GUEST_ERROR, ...) instead Bin Meng
2019-08-23 17:38   ` Alistair Francis
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 06/30] riscv: hw: Remove the unnecessary include of target/riscv/cpu.h Bin Meng
2019-08-23 17:38   ` Alistair Francis
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 07/30] riscv: roms: Remove executable attribute of opensbi images Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 08/30] riscv: sifive_u: Remove the unnecessary include of prci header Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 09/30] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h} Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 10/30] riscv: sifive_e: prci: Fix a typo of hfxosccfg register programming Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 11/30] riscv: sifive_e: prci: Update the PRCI register block size Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 13/30] riscv: Add a sifive_cpu.h to include both E and U cpu type defines Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 14/30] riscv: hart: Extract hart realize to a separate routine Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 15/30] riscv: hart: Add a "hartid-base" property to RISC-V hart array Bin Meng
2019-08-23 18:31   ` Alistair Francis
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 16/30] riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC Bin Meng
2019-08-23 17:36   ` Alistair Francis
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 17/30] riscv: sifive_u: Set the minimum number of cpus to 2 Bin Meng
2019-08-23 18:34   ` Alistair Francis
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 18/30] riscv: sifive_u: Update PLIC hart topology configuration string Bin Meng
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 19/30] riscv: sifive: Implement PRCI model for FU540 Bin Meng
2019-08-23 23:45   ` Alistair Francis
2019-08-23  5:10 ` [Qemu-devel] [PATCH v5 20/30] riscv: sifive_u: Generate hfclk and rtcclk nodes Bin Meng
2019-08-23  5:11 ` [Qemu-devel] [PATCH v5 21/30] riscv: sifive_u: Add PRCI block to the SoC Bin Meng
2019-08-23 23:52   ` Alistair Francis [this message]
2019-08-23  5:11 ` [Qemu-devel] [PATCH v5 22/30] riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes Bin Meng
2019-08-23  5:11 ` [Qemu-devel] [PATCH v5 23/30] riscv: sifive_u: Update UART base addresses and IRQs Bin Meng
2019-08-23  5:11 ` [Qemu-devel] [PATCH v5 24/30] riscv: sifive_u: Change UART node name in device tree Bin Meng
2019-08-23  5:11 ` [Qemu-devel] [PATCH v5 25/30] riscv: roms: Update default bios for sifive_u machine Bin Meng
2019-08-23  5:11 ` [Qemu-devel] [PATCH v5 26/30] riscv: sifive: Implement a model for SiFive FU540 OTP Bin Meng
2019-08-23  5:11 ` [Qemu-devel] [PATCH v5 28/30] riscv: sifive_u: Fix broken GEM support Bin Meng
2019-08-23  5:11 ` [Qemu-devel] [PATCH v5 29/30] riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet Bin Meng
2019-08-23  5:11 ` [Qemu-devel] [PATCH v5 30/30] riscv: sifive_u: Update model and compatible strings in device tree Bin Meng
2019-08-23 17:24 ` [Qemu-devel] [PATCH v5 00/30] riscv: sifive_u: Improve the emulation fidelity of sifive_u machine Alistair Francis
2019-08-24  5:07   ` Bin Meng
2019-08-26 21:33     ` Alistair Francis
2019-08-23 17:40 ` Alistair Francis
     [not found] ` <1566537069-22741-13-git-send-email-bmeng.cn@gmail.com>
2019-08-26 21:36   ` [Qemu-devel] [PATCH v5 12/30] riscv: sifive_e: Drop sifive_mmio_emulate() Alistair Francis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAKmqyKOQKTj4zOvVo5zaP4EprBka7R0RfD58MV_5a7C3ON_3LQ@mail.gmail.com \
    --to=alistair23@gmail.com \
    --cc=Alistair.Francis@wdc.com \
    --cc=bmeng.cn@gmail.com \
    --cc=palmer@sifive.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).