From: Alistair Francis <alistair23@gmail.com>
To: Tommy Wu <tommy.wu@sifive.com>
Cc: qemu-devel@nongnu.org, qemu-riscv@nongnu.org,
frank.chang@sifive.com, palmer@dabbelt.com,
alistair.francis@wdc.com, bin.meng@windriver.com,
liweiwei@iscas.ac.cn, dbarboza@ventanamicro.com,
zhiwei_liu@linux.alibaba.com, richard.henderson@linaro.org
Subject: Re: [PATCH v4 1/4] target/riscv: Add Smrnmi cpu extension.
Date: Mon, 12 Jun 2023 15:03:36 +1000 [thread overview]
Message-ID: <CAKmqyKOve+ceaiVQbYWsLqLgtH6VCPHCuaZZJim3KHaQHcJyfQ@mail.gmail.com> (raw)
In-Reply-To: <20230608072314.3561109-2-tommy.wu@sifive.com>
On Thu, Jun 8, 2023 at 5:25 PM Tommy Wu <tommy.wu@sifive.com> wrote:
>
> Signed-off-by: Frank Chang <frank.chang@sifive.com>
> Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
> ---
> hw/riscv/riscv_hart.c | 21 +++++++++++++++++++++
> include/hw/riscv/riscv_hart.h | 4 ++++
> target/riscv/cpu.c | 13 +++++++++++++
> target/riscv/cpu.h | 7 +++++++
> target/riscv/cpu_bits.h | 12 ++++++++++++
> target/riscv/cpu_helper.c | 24 ++++++++++++++++++++++++
> 6 files changed, 81 insertions(+)
>
> diff --git a/hw/riscv/riscv_hart.c b/hw/riscv/riscv_hart.c
> index 613ea2aaa0..eac18f8c29 100644
> --- a/hw/riscv/riscv_hart.c
> +++ b/hw/riscv/riscv_hart.c
> @@ -33,6 +33,12 @@ static Property riscv_harts_props[] = {
> DEFINE_PROP_STRING("cpu-type", RISCVHartArrayState, cpu_type),
> DEFINE_PROP_UINT64("resetvec", RISCVHartArrayState, resetvec,
> DEFAULT_RSTVEC),
> + DEFINE_PROP_ARRAY("rnmi-interrupt-vector", RISCVHartArrayState,
> + num_rnmi_irqvec, rnmi_irqvec, qdev_prop_uint64,
> + uint64_t),
> + DEFINE_PROP_ARRAY("rnmi-exception-vector", RISCVHartArrayState,
> + num_rnmi_excpvec, rnmi_excpvec, qdev_prop_uint64,
> + uint64_t),
> DEFINE_PROP_END_OF_LIST(),
> };
>
> @@ -47,6 +53,21 @@ static bool riscv_hart_realize(RISCVHartArrayState *s, int idx,
> {
> object_initialize_child(OBJECT(s), "harts[*]", &s->harts[idx], cpu_type);
> qdev_prop_set_uint64(DEVICE(&s->harts[idx]), "resetvec", s->resetvec);
> +
> + if (s->harts[idx].cfg.ext_smrnmi) {
> + if (s->rnmi_irqvec) {
> + qdev_prop_set_uint64(DEVICE(&s->harts[idx]),
> + "rnmi-interrupt-vector",
> + s->rnmi_irqvec[idx]);
> + }
> +
> + if (s->rnmi_excpvec) {
> + qdev_prop_set_uint64(DEVICE(&s->harts[idx]),
> + "rnmi-exception-vector",
> + s->rnmi_excpvec[idx]);
> + }
> + }
> +
> s->harts[idx].env.mhartid = s->hartid_base + idx;
> qemu_register_reset(riscv_harts_cpu_reset, &s->harts[idx]);
> return qdev_realize(DEVICE(&s->harts[idx]), NULL, errp);
> diff --git a/include/hw/riscv/riscv_hart.h b/include/hw/riscv/riscv_hart.h
> index bbc21cdc9a..99c0ac5009 100644
> --- a/include/hw/riscv/riscv_hart.h
> +++ b/include/hw/riscv/riscv_hart.h
> @@ -38,6 +38,10 @@ struct RISCVHartArrayState {
> uint32_t hartid_base;
> char *cpu_type;
> uint64_t resetvec;
> + uint32_t num_rnmi_irqvec;
> + uint64_t *rnmi_irqvec;
> + uint32_t num_rnmi_excpvec;
> + uint64_t *rnmi_excpvec;
> RISCVCPU *harts;
> };
>
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index db0875fb43..c8dc0eaa87 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -119,6 +119,7 @@ static const struct isa_ext_data isa_edata_arr[] = {
> ISA_EXT_DATA_ENTRY(zhinx, PRIV_VERSION_1_12_0, ext_zhinx),
> ISA_EXT_DATA_ENTRY(zhinxmin, PRIV_VERSION_1_12_0, ext_zhinxmin),
> ISA_EXT_DATA_ENTRY(smaia, PRIV_VERSION_1_12_0, ext_smaia),
> + ISA_EXT_DATA_ENTRY(smrnmi, PRIV_VERSION_1_12_0, ext_smrnmi),
The extension should be added after the implementation, so this patch
should be the last patch.
Alistair
> ISA_EXT_DATA_ENTRY(ssaia, PRIV_VERSION_1_12_0, ext_ssaia),
> ISA_EXT_DATA_ENTRY(sscofpmf, PRIV_VERSION_1_12_0, ext_sscofpmf),
> ISA_EXT_DATA_ENTRY(sstc, PRIV_VERSION_1_12_0, ext_sstc),
> @@ -1404,6 +1405,11 @@ static void riscv_cpu_set_irq(void *opaque, int irq, int level)
> g_assert_not_reached();
> }
> }
> +
> +static void riscv_cpu_set_nmi(void *opaque, int irq, int level)
> +{
> + riscv_cpu_set_rnmi(RISCV_CPU(opaque), irq, level);
> +}
> #endif /* CONFIG_USER_ONLY */
>
> static void riscv_cpu_init(Object *obj)
> @@ -1420,6 +1426,8 @@ static void riscv_cpu_init(Object *obj)
> #ifndef CONFIG_USER_ONLY
> qdev_init_gpio_in(DEVICE(cpu), riscv_cpu_set_irq,
> IRQ_LOCAL_MAX + IRQ_LOCAL_GUEST_MAX);
> + qdev_init_gpio_in_named(DEVICE(cpu), riscv_cpu_set_nmi,
> + "riscv.cpu.rnmi", RNMI_MAX);
> #endif /* CONFIG_USER_ONLY */
> }
>
> @@ -1600,6 +1608,7 @@ static Property riscv_cpu_extensions[] = {
> DEFINE_PROP_BOOL("x-epmp", RISCVCPU, cfg.epmp, false),
> DEFINE_PROP_BOOL("x-smaia", RISCVCPU, cfg.ext_smaia, false),
> DEFINE_PROP_BOOL("x-ssaia", RISCVCPU, cfg.ext_ssaia, false),
> + DEFINE_PROP_BOOL("x-smrnmi", RISCVCPU, cfg.ext_smrnmi, false),
>
> DEFINE_PROP_BOOL("x-zvfh", RISCVCPU, cfg.ext_zvfh, false),
> DEFINE_PROP_BOOL("x-zvfhmin", RISCVCPU, cfg.ext_zvfhmin, false),
> @@ -1644,6 +1653,10 @@ static Property riscv_cpu_properties[] = {
>
> DEFINE_PROP_BOOL("rvv_ta_all_1s", RISCVCPU, cfg.rvv_ta_all_1s, false),
> DEFINE_PROP_BOOL("rvv_ma_all_1s", RISCVCPU, cfg.rvv_ma_all_1s, false),
> + DEFINE_PROP_UINT64("rnmi-interrupt-vector", RISCVCPU, env.rnmi_irqvec,
> + DEFAULT_RNMI_IRQVEC),
> + DEFINE_PROP_UINT64("rnmi-exception-vector", RISCVCPU, env.rnmi_excpvec,
> + DEFAULT_RNMI_EXCPVEC),
>
> /*
> * write_misa() is marked as experimental for now so mark
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index de7e43126a..6c14b93cb5 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -366,6 +366,11 @@ struct CPUArchState {
> uint64_t kvm_timer_compare;
> uint64_t kvm_timer_state;
> uint64_t kvm_timer_frequency;
> +
> + /* RNMI */
> + target_ulong rnmip;
> + uint64_t rnmi_irqvec;
> + uint64_t rnmi_excpvec;
> };
>
> /*
> @@ -436,6 +441,7 @@ struct RISCVCPUConfig {
> bool ext_smaia;
> bool ext_ssaia;
> bool ext_sscofpmf;
> + bool ext_smrnmi;
> bool rvv_ta_all_1s;
> bool rvv_ma_all_1s;
>
> @@ -562,6 +568,7 @@ void riscv_cpu_swap_hypervisor_regs(CPURISCVState *env);
> int riscv_cpu_claim_interrupts(RISCVCPU *cpu, uint64_t interrupts);
> uint64_t riscv_cpu_update_mip(CPURISCVState *env, uint64_t mask,
> uint64_t value);
> +void riscv_cpu_set_rnmi(RISCVCPU *cpu, uint32_t irq, bool level);
> #define BOOL_TO_MASK(x) (-!!(x)) /* helper for riscv_cpu_update_mip value */
> void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(void *),
> void *arg);
> diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h
> index 59f0ffd9e1..7cb43b88f3 100644
> --- a/target/riscv/cpu_bits.h
> +++ b/target/riscv/cpu_bits.h
> @@ -659,6 +659,12 @@ typedef enum {
> /* Default Reset Vector adress */
> #define DEFAULT_RSTVEC 0x1000
>
> +/* Default RNMI Interrupt Vector address */
> +#define DEFAULT_RNMI_IRQVEC 0x0
> +
> +/* Default RNMI Exception Vector address */
> +#define DEFAULT_RNMI_EXCPVEC 0x0
> +
> /* Exception causes */
> typedef enum RISCVException {
> RISCV_EXCP_NONE = -1, /* sentinel value */
> @@ -705,6 +711,9 @@ typedef enum RISCVException {
> #define IRQ_LOCAL_MAX 16
> #define IRQ_LOCAL_GUEST_MAX (TARGET_LONG_BITS - 1)
>
> +/* RNMI causes */
> +#define RNMI_MAX 16
> +
> /* mip masks */
> #define MIP_USIP (1 << IRQ_U_SOFT)
> #define MIP_SSIP (1 << IRQ_S_SOFT)
> @@ -896,6 +905,9 @@ typedef enum RISCVException {
> #define MHPMEVENT_IDX_MASK 0xFFFFF
> #define MHPMEVENT_SSCOF_RESVD 16
>
> +/* RISC-V-specific interrupt pending bits. */
> +#define CPU_INTERRUPT_RNMI CPU_INTERRUPT_TGT_EXT_0
> +
> /* JVT CSR bits */
> #define JVT_MODE 0x3F
> #define JVT_BASE (~0x3F)
> diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
> index 56381aaf26..da477b6c99 100644
> --- a/target/riscv/cpu_helper.c
> +++ b/target/riscv/cpu_helper.c
> @@ -636,6 +636,30 @@ uint64_t riscv_cpu_update_mip(CPURISCVState *env, uint64_t mask,
> return old;
> }
>
> +void riscv_cpu_set_rnmi(RISCVCPU *cpu, uint32_t irq, bool level)
> +{
> + CPURISCVState *env = &cpu->env;
> + CPUState *cs = CPU(cpu);
> + bool release_lock = false;
> +
> + if (!qemu_mutex_iothread_locked()) {
> + release_lock = true;
> + qemu_mutex_lock_iothread();
> + }
> +
> + if (level) {
> + env->rnmip |= 1 << irq;
> + cpu_interrupt(cs, CPU_INTERRUPT_RNMI);
> + } else {
> + env->rnmip &= ~(1 << irq);
> + cpu_reset_interrupt(cs, CPU_INTERRUPT_RNMI);
> + }
> +
> + if (release_lock) {
> + qemu_mutex_unlock_iothread();
> + }
> +}
> +
> void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(void *),
> void *arg)
> {
> --
> 2.31.1
>
>
next prev parent reply other threads:[~2023-06-12 5:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-08 7:23 [PATCH v4 0/4] target/riscv: Add Smrnmi support Tommy Wu
2023-06-08 7:23 ` [PATCH v4 1/4] target/riscv: Add Smrnmi cpu extension Tommy Wu
2023-06-08 9:52 ` Andrew Jones
2023-06-12 5:03 ` Alistair Francis [this message]
2023-06-08 7:23 ` [PATCH v4 2/4] target/riscv: Add Smrnmi CSRs Tommy Wu
2023-06-12 4:58 ` Alistair Francis
2023-06-08 7:23 ` [PATCH v4 3/4] target/riscv: Handle Smrnmi interrupt and exception Tommy Wu
2023-06-08 7:23 ` [PATCH v4 4/4] target/riscv: Add Smrnmi mnret instruction Tommy Wu
2023-06-08 9:43 ` [PATCH v4 0/4] target/riscv: Add Smrnmi support Andrew Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAKmqyKOve+ceaiVQbYWsLqLgtH6VCPHCuaZZJim3KHaQHcJyfQ@mail.gmail.com \
--to=alistair23@gmail.com \
--cc=alistair.francis@wdc.com \
--cc=bin.meng@windriver.com \
--cc=dbarboza@ventanamicro.com \
--cc=frank.chang@sifive.com \
--cc=liweiwei@iscas.ac.cn \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=tommy.wu@sifive.com \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).