From: Greg KH <gregkh@linuxfoundation.org>
To: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: netdev@vger.kernel.org, rust-for-linux@vger.kernel.org,
andrew@lunn.ch, miguel.ojeda.sandonis@gmail.com,
tmgross@umich.edu
Subject: Re: [PATCH net-next v3 3/3] net: phy: add Rust Asix PHY driver
Date: Mon, 9 Oct 2023 12:10:11 +0200 [thread overview]
Message-ID: <2023100955-scrambler-radio-e93a@gregkh> (raw)
In-Reply-To: <20231009013912.4048593-4-fujita.tomonori@gmail.com>
On Mon, Oct 09, 2023 at 10:39:12AM +0900, FUJITA Tomonori wrote:
> This is the Rust implementation of drivers/net/phy/ax88796b.c. The
> features are equivalent. You can choose C or Rust versionon kernel
> configuration.
>
> Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
> ---
> drivers/net/phy/Kconfig | 7 ++
> drivers/net/phy/Makefile | 6 +-
> drivers/net/phy/ax88796b_rust.rs | 129 +++++++++++++++++++++++++++++++
> rust/uapi/uapi_helper.h | 2 +
> 4 files changed, 143 insertions(+), 1 deletion(-)
> create mode 100644 drivers/net/phy/ax88796b_rust.rs
>
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index 421d2b62918f..0317be180ac2 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -107,6 +107,13 @@ config AX88796B_PHY
> Currently supports the Asix Electronics PHY found in the X-Surf 100
> AX88796B package.
>
> +config AX88796B_RUST_PHY
> + bool "Rust version driver for Asix PHYs"
> + depends on RUST_PHYLIB_BINDINGS && AX88796B_PHY
> + help
> + Uses the Rust version driver for Asix PHYs (ax88796b_rust.ko)
> + instead of the C version.
This does not properly describe what hardware this driver supports. And
that's an odd way to describe the module name, but I see none of the
other entries in this file do that either, so maybe the PHY subsystm
doesn't require that?
thanks,
greg k-h
next prev parent reply other threads:[~2023-10-09 10:10 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-09 1:39 [PATCH net-next v3 0/3] Rust abstractions for network PHY drivers FUJITA Tomonori
2023-10-09 1:39 ` [PATCH net-next v3 1/3] rust: core " FUJITA Tomonori
2023-10-09 3:17 ` Trevor Gross
2023-10-09 12:19 ` Benno Lossin
2023-10-09 13:02 ` Andrew Lunn
2023-10-09 13:56 ` Benno Lossin
2023-10-09 14:13 ` Andrew Lunn
2023-10-11 14:16 ` FUJITA Tomonori
2023-10-09 12:59 ` Miguel Ojeda
2023-10-09 13:49 ` FUJITA Tomonori
2023-10-09 14:32 ` Miguel Ojeda
2023-10-09 15:15 ` FUJITA Tomonori
2023-10-09 15:19 ` Miguel Ojeda
2023-10-09 15:11 ` Greg KH
2023-10-09 15:24 ` FUJITA Tomonori
2023-10-09 15:39 ` Miguel Ojeda
2023-10-09 15:50 ` FUJITA Tomonori
2023-10-11 9:59 ` Miguel Ojeda
2023-10-11 23:18 ` FUJITA Tomonori
2023-10-13 11:59 ` Miguel Ojeda
2023-10-13 15:15 ` FUJITA Tomonori
2023-10-13 18:33 ` Miguel Ojeda
2023-10-14 12:31 ` FUJITA Tomonori
2023-10-14 16:19 ` Miguel Ojeda
2023-10-12 0:29 ` FUJITA Tomonori
2023-10-09 21:07 ` Trevor Gross
2023-10-09 21:21 ` Andrew Lunn
2023-10-11 7:04 ` FUJITA Tomonori
2023-10-09 13:54 ` Andrew Lunn
2023-10-09 14:48 ` Miguel Ojeda
2023-10-09 17:04 ` Andrew Lunn
2023-10-12 3:59 ` FUJITA Tomonori
2023-10-12 4:43 ` Trevor Gross
2023-10-12 7:09 ` FUJITA Tomonori
2023-10-11 18:29 ` Boqun Feng
2023-10-12 5:58 ` FUJITA Tomonori
2023-10-12 6:34 ` Boqun Feng
2023-10-12 6:44 ` FUJITA Tomonori
2023-10-12 7:02 ` FUJITA Tomonori
2023-10-12 7:13 ` Boqun Feng
2023-10-12 7:32 ` Trevor Gross
2023-10-12 7:58 ` FUJITA Tomonori
2023-10-12 9:10 ` Benno Lossin
2023-10-13 4:17 ` Boqun Feng
2023-10-13 5:45 ` FUJITA Tomonori
2023-10-13 7:56 ` Benno Lossin
2023-10-13 9:53 ` FUJITA Tomonori
2023-10-13 10:03 ` Benno Lossin
2023-10-13 10:53 ` FUJITA Tomonori
2023-10-14 7:47 ` Benno Lossin
2023-10-14 21:55 ` Andrew Lunn
2023-10-14 22:18 ` Benno Lossin
2023-10-14 22:33 ` Andrew Lunn
2023-10-14 4:11 ` Boqun Feng
2023-10-14 11:59 ` Miguel Ojeda
2023-10-12 7:07 ` Boqun Feng
2023-10-09 1:39 ` [PATCH net-next v3 2/3] MAINTAINERS: add Rust PHY abstractions to the ETHERNET PHY LIBRARY FUJITA Tomonori
2023-10-09 1:39 ` [PATCH net-next v3 3/3] net: phy: add Rust Asix PHY driver FUJITA Tomonori
2023-10-09 3:22 ` Trevor Gross
2023-10-09 7:23 ` Jiri Pirko
2023-10-09 10:58 ` Miguel Ojeda
2023-10-09 11:41 ` FUJITA Tomonori
2023-10-09 12:32 ` Andrew Lunn
2023-10-09 14:01 ` Miguel Ojeda
2023-10-09 14:31 ` Andrew Lunn
2023-10-09 15:27 ` Miguel Ojeda
2023-10-09 15:35 ` Miguel Ojeda
2023-10-09 16:09 ` Andrew Lunn
2023-10-09 10:10 ` Greg KH [this message]
2023-10-12 11:57 ` FUJITA Tomonori
2023-10-09 12:42 ` Benno Lossin
2023-10-09 13:15 ` Andrew Lunn
2023-10-09 13:45 ` Benno Lossin
2023-10-09 12:48 ` [PATCH net-next v3 0/3] Rust abstractions for network PHY drivers Andrew Lunn
2023-10-09 12:53 ` Miguel Ojeda
2023-10-09 13:06 ` Greg KH
2023-10-09 14:13 ` Miguel Ojeda
2023-10-09 14:52 ` Greg KH
2023-10-09 15:06 ` Miguel Ojeda
2023-10-09 15:14 ` Greg KH
2023-10-09 15:15 ` Miguel Ojeda
2023-10-09 13:24 ` Andrew Lunn
2023-10-09 13:36 ` Miguel Ojeda
2023-10-09 14:21 ` Andrea Righi
2023-10-09 14:22 ` Miguel Ojeda
2023-10-09 14:56 ` Andrew Lunn
2023-10-09 15:04 ` Greg KH
2023-10-09 15:10 ` Miguel Ojeda
2023-10-09 15:15 ` Miguel Ojeda
2023-10-09 14:56 ` Greg KH
2023-10-09 15:09 ` Andrea Righi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023100955-scrambler-radio-e93a@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=andrew@lunn.ch \
--cc=fujita.tomonori@gmail.com \
--cc=miguel.ojeda.sandonis@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=tmgross@umich.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).