From: Matthew Hagan <mnhagan88@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Vladimir Oltean <olteanv@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Matthew Hagan <mnhagan88@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
soc@kernel.org, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
Sam Ravnborg <sam@ravnborg.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series
Date: Fri, 6 Aug 2021 21:44:31 +0100 [thread overview]
Message-ID: <20210806204446.2981299-1-mnhagan88@gmail.com> (raw)
Message-ID: <20210806204431.jUk8GAZoIKela5Xy6lm3RmMYAhXDN9xWnCpNLEfGM7A@z> (raw)
Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added
(Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly
specifying LEDs in the form "led-N" and with the color/function/
function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used
(Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir
Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
Matthew Hagan (5):
ARM: dts: NSP: Add common bindings for MX64/MX65
ARM: dts: NSP: Add Ax stepping modifications
ARM: dts: NSP: Add DT files for Meraki MX64 series
ARM: dts: NSP: Add DT files for Meraki MX65 series
dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
.../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 +
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 71 +++++
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 ++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 ++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 +++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++
12 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
--
2.26.3
next reply other threads:[~2021-08-06 20:44 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-06 20:44 Matthew Hagan [this message]
2021-08-06 20:44 ` [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190649.HmTeb43n7OCXYh5UV6JT0bVlwlMp2VMsXjgm1UTxtgI@z>
2021-08-22 19:06 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190711.cJnZ4XoKJsnc9FibMU5flCy_ruPZUxUJGYd5yvENHN4@z>
2021-08-22 19:07 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190734.kgi8NN-ELSJMnWNu-tp3iPc6fBGikL-RonkvdqMPxaE@z>
2021-08-22 19:07 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190800.mYzyBiMhvkxqZYOm1rzCJlCE-j7ifxub6k1P_ovt2yU@z>
2021-08-22 19:08 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822191100.2DfPkuhSlxXEKn5LIA2RBAoY4Xuvqy8f7-r6t3zGnBI@z>
2021-08-22 19:11 ` Florian Fainelli
[not found] ` <20210822191157.pVC3SK9g58F0tlB82DKNu_C3JMrIOCPGhoXIBuOZFPg@z>
2021-08-22 19:11 ` [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210806204446.2981299-1-mnhagan88@gmail.com \
--to=mnhagan88@gmail.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=geert+renesas@glider.be \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=olteanv@gmail.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=sbranden@broadcom.com \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).