xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Toshi Kani <toshi.kani@hpe.com>
To: mingo@kernel.org, bp@suse.de, hpa@zytor.com, tglx@linutronix.de
Cc: jgross@suse.com, Toshi Kani <toshi.kani@hpe.com>,
	mcgrof@suse.com, x86@kernel.org, linux-kernel@vger.kernel.org,
	paul.gortmaker@windriver.com, xen-devel@lists.xenproject.org,
	elliott@hpe.com
Subject: [PATCH v3 6/7] x86/xen, pat: Remove PAT table init code from Xen
Date: Wed, 23 Mar 2016 15:42:02 -0600	[thread overview]
Message-ID: <1458769323-24491-7-git-send-email-toshi.kani@hpe.com> (raw)
In-Reply-To: <1458769323-24491-1-git-send-email-toshi.kani@hpe.com>

Xen supports PAT without MTRRs for its guests.  In order to
enable WC attribute, it was necessary for xen_start_kernel()
to call pat_init_cache_modes() to update PAT table before
starting guest kernel.

Now that the kernel initializes PAT table to the BIOS handoff
state when MTRR is disabled, this Xen-specific PAT init code
is no longer necessary.  Delete it from xen_start_kernel().

Also change __init_cache_modes() to a static function since
PAT table should not be tweaked by other modules.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/pat.h |    1 -
 arch/x86/mm/pat.c          |    2 +-
 arch/x86/xen/enlighten.c   |    9 ---------
 3 files changed, 1 insertion(+), 11 deletions(-)

diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index 0ad356c..0b1ff4c 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -7,7 +7,6 @@
 bool pat_enabled(void);
 void pat_disable(const char *reason);
 extern void pat_init(void);
-void __init_cache_modes(u64);
 
 extern int reserve_memtype(u64 start, u64 end,
 		enum page_cache_mode req_pcm, enum page_cache_mode *ret_pcm);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 3aea1ab..9db6915 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -192,7 +192,7 @@ static enum page_cache_mode pat_get_cache_mode(unsigned pat_val, char *msg)
  * configuration.
  * Using lower indices is preferred, so we start with highest index.
  */
-void __init_cache_modes(u64 pat)
+static void __init_cache_modes(u64 pat)
 {
 	enum page_cache_mode cache;
 	char pat_msg[33];
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index f4296b6..d5f172d 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -75,7 +75,6 @@
 #include <asm/mach_traps.h>
 #include <asm/mwait.h>
 #include <asm/pci_x86.h>
-#include <asm/pat.h>
 #include <asm/cpu.h>
 
 #ifdef CONFIG_ACPI
@@ -1511,7 +1510,6 @@ asmlinkage __visible void __init xen_start_kernel(void)
 {
 	struct physdev_set_iopl set_iopl;
 	unsigned long initrd_start = 0;
-	u64 pat;
 	int rc;
 
 	if (!xen_start_info)
@@ -1618,13 +1616,6 @@ asmlinkage __visible void __init xen_start_kernel(void)
 				   xen_start_info->nr_pages);
 	xen_reserve_special_pages();
 
-	/*
-	 * Modify the cache mode translation tables to match Xen's PAT
-	 * configuration.
-	 */
-	rdmsrl(MSR_IA32_CR_PAT, pat);
-	__init_cache_modes(pat);
-
 	/* keep using Xen gdt for now; no urgent need to change it */
 
 #ifdef CONFIG_X86_32

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  parent reply	other threads:[~2016-03-23 20:49 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1458769323-24491-1-git-send-email-toshi.kani@hpe.com>
2016-03-23 21:41 ` [PATCH v3 1/7] x86/mm/pat: Add support of non-default PAT MSR setting Toshi Kani
2016-03-23 21:41 ` [PATCH v3 2/7] x86/mm/pat: Add pat_disable() interface Toshi Kani
2016-03-23 21:41 ` [PATCH v3 3/7] x86/mm/pat: Replace cpu_has_pat with boot_cpu_has Toshi Kani
2016-03-23 21:42 ` [PATCH v3 4/6] x86/mtrr: Fix Xorg crashes in Qemu sessions Toshi Kani
2016-03-23 21:42 ` [PATCH v3 5/7] x86/mtrr: Fix PAT init handling when MTRR is disabled Toshi Kani
2016-03-23 21:42 ` Toshi Kani [this message]
2016-03-23 21:42 ` [PATCH v3 7/7] x86/pat: Document PAT initialization Toshi Kani
2016-03-29 10:34 ` [PATCH v3 0/7] Enhance PAT init to fix Xorg crashes Ingo Molnar
     [not found] ` <20160329103442.GA12645@gmail.com>
2016-03-29 14:19   ` Toshi Kani
     [not found]   ` <1459261167.6393.668.camel@hpe.com>
2016-03-29 14:46     ` Boris Ostrovsky
     [not found]     ` <56FA9563.60401@oracle.com>
2016-03-29 15:49       ` Toshi Kani
     [not found]       ` <1459266567.6393.669.camel@hpe.com>
2016-03-30 18:02         ` Luis R. Rodriguez
     [not found]         ` <CAB=NE6VZD3gJicAzm3068APmVeKmFdF-gavNjEoVCz51hV262g@mail.gmail.com>
2016-03-30 18:58           ` Konrad Rzeszutek Wilk
2016-03-30 20:10             ` [LKP] " Luis R. Rodriguez
     [not found]             ` <CAB=NE6V2BOfkM5B8E+YULqrjqh_QaXOtBgyqpvBoku-73N4X-Q@mail.gmail.com>
2016-03-30 20:29               ` Konrad Rzeszutek Wilk
2016-03-30 20:47                 ` Luis R. Rodriguez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458769323-24491-7-git-send-email-toshi.kani@hpe.com \
    --to=toshi.kani@hpe.com \
    --cc=bp@suse.de \
    --cc=elliott@hpe.com \
    --cc=hpa@zytor.com \
    --cc=jgross@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mcgrof@suse.com \
    --cc=mingo@kernel.org \
    --cc=paul.gortmaker@windriver.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).