xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
To: xen devel <xen-devel@lists.xen.org>,
	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Ian Campbell <ian.campbell@citrix.com>,
	Ian Jackson <ian.jackson@eu.citrix.com>,
	Wei Liu <wei.liu2@citrix.com>
Cc: Lars Kurth <lars.kurth@citrix.com>,
	Changlong Xie <xiecl.fnst@cn.fujitsu.com>,
	Wen Congyang <wency@cn.fujitsu.com>,
	Li Zhijian <lizhijian@cn.fujitsu.com>,
	Gui Jianfeng <guijianfeng@cn.fujitsu.com>,
	Jiang Yunhong <yunhong.jiang@intel.com>,
	Dong Eddie <eddie.dong@intel.com>,
	Anthony Perard <anthony.perard@citrix.com>,
	Shriram Rajagopalan <rshriram@cs.ubc.ca>,
	Yang Hongyang <hongyang.yang@easystack.cn>
Subject: [PATCH v13 03/26] tools/libxl: Add back channel to allow migration target send data back
Date: Fri, 25 Mar 2016 14:44:10 +0800	[thread overview]
Message-ID: <1458888273-7469-4-git-send-email-xiecl.fnst@cn.fujitsu.com> (raw)
In-Reply-To: <1458888273-7469-1-git-send-email-xiecl.fnst@cn.fujitsu.com>

From: Wen Congyang <wency@cn.fujitsu.com>

In COLO mode, secondary needs to send the following data to primary:
1. In libxl
   Secondary sends the following CHECKPOINT_CONTEXT to primary:
   CHECKPOINT_SVM_SUSPENDED, CHECKPOINT_SVM_READY and CHECKPOINT_SVM_RESUMED
2. In libxc
   Secondary sends the dirty pfn list to primary

But the io_fd only can be written in primary, and only can be read in
secondary. Save recv_fd in domain_suspend_state, and send_fd in
domain_create_state. Extend libxl_domain_create_restore API, add a
send_fd param to it. Add LIBXL_HAVE_CREATE_RESTORE_SEND_FD to indicate
the API change.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
---
 tools/libxl/libxl.c                  |  3 +--
 tools/libxl/libxl.h                  | 29 ++++++++++++++++++++++++++++-
 tools/libxl/libxl_create.c           | 11 +++++++----
 tools/libxl/libxl_internal.h         |  2 ++
 tools/libxl/xl_cmdimpl.c             |  8 +++++++-
 tools/ocaml/libs/xl/xenlight_stubs.c |  2 +-
 6 files changed, 46 insertions(+), 9 deletions(-)

diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 3471c4c..6bc46cb 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -834,7 +834,6 @@ out:
 static void remus_failover_cb(libxl__egc *egc,
                               libxl__domain_save_state *dss, int rc);
 
-/* TODO: Explicit Checkpoint acknowledgements via recv_fd. */
 int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
                              uint32_t domid, int send_fd, int recv_fd,
                              const libxl_asyncop_how *ao_how)
@@ -871,7 +870,7 @@ int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
     dss->callback = remus_failover_cb;
     dss->domid = domid;
     dss->fd = send_fd;
-    /* TODO do something with recv_fd */
+    dss->recv_fd = recv_fd;
     dss->type = type;
     dss->live = 1;
     dss->debug = 0;
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index f61bc4b..a569286 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -651,6 +651,15 @@ typedef struct libxl__ctx libxl_ctx;
 #define LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS 1
 
 /*
+ * LIBXL_HAVE_DOMAIN_CREATE_RESTORE_SEND_BACK_FD 1
+ *
+ * If this is defined, libxl_domain_create_restore()'s API includes the
+ * send_back_fd param. This is used only with COLO, for the libxl migration
+ * back channel; other callers should pass -1.
+ */
+#define LIBXL_HAVE_DOMAIN_CREATE_RESTORE_SEND_BACK_FD 1
+
+/*
  * LIBXL_HAVE_CREATEINFO_PVH
  * If this is defined, then libxl supports creation of a PVH guest.
  */
@@ -1177,6 +1186,7 @@ int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
                             LIBXL_EXTERNAL_CALLERS_ONLY;
 int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
                                 uint32_t *domid, int restore_fd,
+                                int send_back_fd,
                                 const libxl_domain_restore_params *params,
                                 const libxl_asyncop_how *ao_how,
                                 const libxl_asyncprogress_how *aop_console_how)
@@ -1197,7 +1207,7 @@ int static inline libxl_domain_create_restore_0x040200(
     libxl_domain_restore_params_init(&params);
 
     ret = libxl_domain_create_restore(
-        ctx, d_config, domid, restore_fd, &params, ao_how, aop_console_how);
+        ctx, d_config, domid, restore_fd, -1, &params, ao_how, aop_console_how);
 
     libxl_domain_restore_params_dispose(&params);
     return ret;
@@ -1205,6 +1215,23 @@ int static inline libxl_domain_create_restore_0x040200(
 
 #define libxl_domain_create_restore libxl_domain_create_restore_0x040200
 
+#elif defined(LIBXL_API_VERSION) && LIBXL_API_VERSION >= 0x040400 \
+                                 && LIBXL_API_VERSION < 0x040700
+
+int static inline libxl_domain_create_restore_0x040400(
+    libxl_ctx *ctx, libxl_domain_config *d_config,
+    uint32_t *domid, int restore_fd,
+    const libxl_domain_restore_params *params,
+    const libxl_asyncop_how *ao_how,
+    const libxl_asyncprogress_how *aop_console_how)
+    LIBXL_EXTERNAL_CALLERS_ONLY
+{
+    return libxl_domain_create_restore(ctx, d_config, domid, restore_fd,
+                                       -1, params, ao_how, aop_console_how);
+}
+
+#define libxl_domain_create_restore libxl_domain_create_restore_0x040400
+
 #endif
 
 int libxl_domain_soft_reset(libxl_ctx *ctx,
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 61b5c01..09f2f13 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1639,7 +1639,7 @@ static void domain_create_cb(libxl__egc *egc,
                              int rc, uint32_t domid);
 
 static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
-                            uint32_t *domid, int restore_fd,
+                            uint32_t *domid, int restore_fd, int send_back_fd,
                             const libxl_domain_restore_params *params,
                             const libxl_asyncop_how *ao_how,
                             const libxl_asyncprogress_how *aop_console_how)
@@ -1654,6 +1654,7 @@ static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
     libxl_domain_config_init(&cdcs->dcs.guest_config_saved);
     libxl_domain_config_copy(ctx, &cdcs->dcs.guest_config_saved, d_config);
     cdcs->dcs.restore_fd = cdcs->dcs.libxc_fd = restore_fd;
+    cdcs->dcs.send_back_fd = send_back_fd;
     if (restore_fd > -1) {
         cdcs->dcs.restore_params = *params;
         rc = libxl__fd_flags_modify_save(gc, cdcs->dcs.restore_fd,
@@ -1832,18 +1833,20 @@ int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
                             const libxl_asyncop_how *ao_how,
                             const libxl_asyncprogress_how *aop_console_how)
 {
-    return do_domain_create(ctx, d_config, domid, -1, NULL,
+    return do_domain_create(ctx, d_config, domid, -1, -1, NULL,
                             ao_how, aop_console_how);
 }
 
 int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
                                 uint32_t *domid, int restore_fd,
+                                int send_back_fd,
                                 const libxl_domain_restore_params *params,
                                 const libxl_asyncop_how *ao_how,
                                 const libxl_asyncprogress_how *aop_console_how)
 {
-    return do_domain_create(ctx, d_config, domid, restore_fd, params,
-                            ao_how, aop_console_how);
+    assert(send_back_fd == -1);
+    return do_domain_create(ctx, d_config, domid, restore_fd, send_back_fd,
+                            params, ao_how, aop_console_how);
 }
 
 int libxl_domain_soft_reset(libxl_ctx *ctx,
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index de65d85..42d8bbd 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3150,6 +3150,7 @@ struct libxl__domain_save_state {
     uint32_t domid;
     int fd;
     int fdfl; /* original flags on fd */
+    int recv_fd;
     libxl_domain_type type;
     int live;
     int debug;
@@ -3491,6 +3492,7 @@ struct libxl__domain_create_state {
     libxl_domain_config guest_config_saved; /* vanilla config */
     int restore_fd, libxc_fd;
     int restore_fdfl; /* original flags of restore_fd */
+    int send_back_fd;
     libxl_domain_restore_params restore_params;
     uint32_t domid_soft_reset;
     libxl__domain_create_cb *callback;
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index a3610fc..2e64f44 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -159,6 +159,7 @@ struct domain_create {
     char *extra_config; /* extra config string */
     const char *restore_file;
     int migrate_fd; /* -1 means none */
+    int send_back_fd; /* -1 means none */
     char **migration_domname_r; /* from malloc */
 };
 
@@ -2796,6 +2797,7 @@ static uint32_t create_domain(struct domain_create *dom_info)
     int config_len = 0;
     int restore_fd = -1;
     int restore_fd_to_close = -1;
+    int send_back_fd = -1;
     const libxl_asyncprogress_how *autoconnect_console_how;
     struct save_file_header hdr;
     uint32_t domid_soft_reset = INVALID_DOMID;
@@ -2813,6 +2815,7 @@ static uint32_t create_domain(struct domain_create *dom_info)
         if (migrate_fd >= 0) {
             restore_source = "<incoming migration stream>";
             restore_fd = migrate_fd;
+            send_back_fd = dom_info->send_back_fd;
         } else {
             restore_source = restore_file;
             restore_fd = open(restore_file, O_RDONLY);
@@ -3001,7 +3004,7 @@ start:
 
         ret = libxl_domain_create_restore(ctx, &d_config,
                                           &domid, restore_fd,
-                                          &params,
+                                          send_back_fd, &params,
                                           0, autoconnect_console_how);
 
         libxl_domain_restore_params_dispose(&params);
@@ -4754,6 +4757,7 @@ static void migrate_receive(int debug, int daemonize, int monitor,
     dom_info.monitor = monitor;
     dom_info.paused = 1;
     dom_info.migrate_fd = recv_fd;
+    dom_info.send_back_fd = -1;
     dom_info.migration_domname_r = &migration_domname;
     dom_info.checkpointed_stream = checkpointed;
 
@@ -4927,6 +4931,7 @@ int main_restore(int argc, char **argv)
     dom_info.config_file = config_file;
     dom_info.restore_file = checkpoint_file;
     dom_info.migrate_fd = -1;
+    dom_info.send_back_fd = -1;
     dom_info.vnc = vnc;
     dom_info.vncautopass = vncautopass;
     dom_info.console_autoconnect = console_autoconnect;
@@ -5394,6 +5399,7 @@ int main_create(int argc, char **argv)
     dom_info.quiet = quiet;
     dom_info.config_file = filename;
     dom_info.migrate_fd = -1;
+    dom_info.send_back_fd = -1;
     dom_info.vnc = vnc;
     dom_info.vncautopass = vncautopass;
     dom_info.console_autoconnect = console_autoconnect;
diff --git a/tools/ocaml/libs/xl/xenlight_stubs.c b/tools/ocaml/libs/xl/xenlight_stubs.c
index 4133527..98b52b9 100644
--- a/tools/ocaml/libs/xl/xenlight_stubs.c
+++ b/tools/ocaml/libs/xl/xenlight_stubs.c
@@ -538,7 +538,7 @@ value stub_libxl_domain_create_restore(value ctx, value domain_config, value par
 
 	caml_enter_blocking_section();
 	ret = libxl_domain_create_restore(CTX, &c_dconfig, &c_domid, restore_fd,
-		&c_params, ao_how, NULL);
+		-1, &c_params, ao_how, NULL);
 	caml_leave_blocking_section();
 
 	free(ao_how);
-- 
1.9.3




_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  parent reply	other threads:[~2016-03-25  6:44 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-25  6:44 [PATCH v13 00/26] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Changlong Xie
2016-03-25  6:44 ` [PATCH v13 01/26] tools/libxl: introduction of libxl__qmp_restore to load qemu state Changlong Xie
2016-03-25  6:44 ` [PATCH v13 02/26] tools/libxl: introduce libxl__domain_common_switch_qemu_logdirty() Changlong Xie
2016-03-25  6:44 ` Changlong Xie [this message]
2016-04-04 12:07   ` [PATCH v13 03/26] tools/libxl: Add back channel to allow migration target send data back Olaf Hering
2016-04-04 13:02     ` Wei Liu
2016-04-04 15:29       ` Olaf Hering
2016-03-25  6:44 ` [PATCH v13 04/26] tools/libxl: Introduce new helper function dup_fd_helper() Changlong Xie
2016-03-25  6:44 ` [PATCH v13 05/26] tools/libx{l, c}: add back channel to libxc Changlong Xie
2016-03-25  6:44 ` [PATCH v13 06/26] docs: add colo readme Changlong Xie
2016-03-25  6:44 ` [PATCH v13 07/26] docs/libxl: Introduce CHECKPOINT_CONTEXT to support migration v2 colo streams Changlong Xie
2016-03-25  6:44 ` [PATCH v13 08/26] libxc/migration: Specification update for DIRTY_PFN_LIST records Changlong Xie
2016-03-25  6:44 ` [PATCH v13 09/26] libxc/migration: export read_record for common use Changlong Xie
2016-03-25  6:44 ` [PATCH v13 10/26] tools/libxl: add back channel support to write stream Changlong Xie
2016-03-25  6:44 ` [PATCH v13 11/26] tools/libxl: add back channel support to read stream Changlong Xie
2016-03-25  6:44 ` [PATCH v13 12/26] secondary vm suspend/resume/checkpoint code Changlong Xie
2016-03-30 14:07   ` Ian Jackson
2016-03-25  6:44 ` [PATCH v13 13/26] libxl_internal: move stream read manipulations to right place Changlong Xie
2016-03-25  6:44 ` [PATCH v13 14/26] primary vm suspend/resume/checkpoint code Changlong Xie
2016-03-30 14:10   ` Ian Jackson
2016-03-25  6:44 ` [PATCH v13 15/26] libxc/restore: support COLO restore Changlong Xie
2016-03-25  6:44 ` [PATCH v13 16/26] libxc/save: support COLO save Changlong Xie
2016-03-25  6:44 ` [PATCH v13 17/26] implement the cmdline for COLO Changlong Xie
2016-03-25  6:44 ` [PATCH v13 18/26] COLO: introduce new API to prepare/start/do/get_error/stop replication Changlong Xie
2016-03-25  6:44 ` [PATCH v13 19/26] Introduce COLO mode and refactor relevant function Changlong Xie
2016-03-25  6:44 ` [PATCH v13 20/26] Support colo mode for qemu disk Changlong Xie
2016-03-28  3:46   ` [PATCH v13.1 " Changlong Xie
2016-03-30 14:17     ` Ian Jackson
2016-03-30 14:36     ` Ian Jackson
2016-03-25  6:44 ` [PATCH v13 21/26] COLO: use qemu block replication Changlong Xie
2016-03-25  6:44 ` [PATCH v13 22/26] COLO proxy: implement setup/teardown/preresume/postresume/checkpoint Changlong Xie
2016-03-25  6:44 ` [PATCH v13 23/26] COLO nic: implement COLO nic subkind Changlong Xie
2016-03-25 12:56   ` Wei Liu
2016-03-28  3:46   ` [PATCH v13.1 " Changlong Xie
2016-03-30 14:22     ` Ian Jackson
2016-03-30 14:38     ` Ian Jackson
2016-03-30 14:40       ` Ian Jackson
2016-03-25  6:44 ` [PATCH v13 24/26] setup and control colo proxy on primary side Changlong Xie
2016-03-25  6:44 ` [PATCH v13 25/26] setup and control colo proxy on secondary side Changlong Xie
2016-03-30 14:24   ` Ian Jackson
2016-03-31  2:19     ` Changlong Xie
2016-03-25  6:44 ` [PATCH v13 26/26] cmdline switches and config vars to control colo-proxy Changlong Xie
2016-03-28  3:47   ` [PATCH v13.1 " Changlong Xie
2016-03-30 14:28     ` Ian Jackson
2016-03-30 14:42     ` Ian Jackson
2016-03-25 15:51 ` [PATCH v13 00/26] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Wei Liu
2016-03-28  3:52   ` Changlong Xie
2016-03-30 14:52     ` Ian Jackson
2016-03-30 14:50 ` Ian Jackson
2016-03-31  1:26   ` Wen Congyang
2016-03-31  2:28 ` Changlong Xie
2016-03-31 14:22   ` Wei Liu
2016-04-01  1:59     ` Changlong Xie
2016-04-01 13:47       ` Ian Jackson
2016-04-01 14:37         ` Changlong Xie
2016-04-04 16:58 [PATCH v13 03/26] tools/libxl: Add back channel to allow migration target send data back Ian.Jackson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458888273-7469-4-git-send-email-xiecl.fnst@cn.fujitsu.com \
    --to=xiecl.fnst@cn.fujitsu.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=anthony.perard@citrix.com \
    --cc=eddie.dong@intel.com \
    --cc=guijianfeng@cn.fujitsu.com \
    --cc=hongyang.yang@easystack.cn \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=konrad.wilk@oracle.com \
    --cc=lars.kurth@citrix.com \
    --cc=lizhijian@cn.fujitsu.com \
    --cc=rshriram@cs.ubc.ca \
    --cc=wei.liu2@citrix.com \
    --cc=wency@cn.fujitsu.com \
    --cc=xen-devel@lists.xen.org \
    --cc=yunhong.jiang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).