From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
npiggin@gmail.com
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v3 07/41] powerpc/40x: Prepare normal exception handler for enabling MMU early
Date: Fri, 12 Mar 2021 12:50:16 +0000 (UTC) [thread overview]
Message-ID: <01963af2b83037bca270d7bf1336ffcf35da8282.1615552866.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1615552866.git.christophe.leroy@csgroup.eu>
Ensure normal exception handler are able to manage stuff with
MMU enabled. For that we use CONFIG_VMAP_STACK related code
allthough there is no intention to really activate CONFIG_VMAP_STACK
on powerpc 40x for the moment.
40x uses SPRN_DEAR instead of SPRN_DAR and SPRN_ESR instead of
SPRN_DSISR. Take it into account in common macros.
40x MSR value doesn't fit on 15 bits, use LOAD_REG_IMMEDIATE() in
common macros that will be used also with 40x.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/entry_32.S | 2 +-
arch/powerpc/kernel/head_32.h | 15 ++++++++++++++-
arch/powerpc/kernel/head_40x.S | 17 ++++++-----------
3 files changed, 21 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 8528b4c7f9d3..535c55f4393a 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -162,7 +162,7 @@ transfer_to_handler:
li r12,-1 /* clear all pending debug events */
mtspr SPRN_DBSR,r12
lis r11,global_dbcr0@ha
- tophys(r11,r11)
+ tophys_novmstack r11,r11
addi r11,r11,global_dbcr0@l
#ifdef CONFIG_SMP
lwz r9,TASK_CPU(r2)
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index 5d4706c14572..ac6b391f1493 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -22,9 +22,17 @@
#ifdef CONFIG_VMAP_STACK
mfspr r10, SPRN_SPRG_THREAD
.if \handle_dar_dsisr
+#ifdef CONFIG_40x
+ mfspr r11, SPRN_DEAR
+#else
mfspr r11, SPRN_DAR
+#endif
stw r11, DAR(r10)
+#ifdef CONFIG_40x
+ mfspr r11, SPRN_ESR
+#else
mfspr r11, SPRN_DSISR
+#endif
stw r11, DSISR(r10)
.endif
mfspr r11, SPRN_SRR0
@@ -61,7 +69,7 @@
.macro EXCEPTION_PROLOG_2 handle_dar_dsisr=0
#ifdef CONFIG_VMAP_STACK
- li r11, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
+ LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_IR | MSR_RI)) /* can take DTLB miss */
mtmsr r11
isync
mfspr r11, SPRN_SPRG_SCRATCH2
@@ -158,8 +166,13 @@
.macro save_dar_dsisr_on_stack reg1, reg2, sp
#ifndef CONFIG_VMAP_STACK
+#ifdef CONFIG_40x
+ mfspr \reg1, SPRN_DEAR
+ mfspr \reg2, SPRN_ESR
+#else
mfspr \reg1, SPRN_DAR
mfspr \reg2, SPRN_DSISR
+#endif
stw \reg1, _DAR(\sp)
stw \reg2, _DSISR(\sp)
#endif
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 1468f38c3860..4bf0aee858eb 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -221,11 +221,8 @@ _ENTRY(saved_ksp_limit)
* if they can't resolve the lightweight TLB fault.
*/
START_EXCEPTION(0x0300, DataStorage)
- EXCEPTION_PROLOG
- mfspr r5, SPRN_ESR /* Grab the ESR, save it */
- stw r5, _ESR(r11)
- mfspr r4, SPRN_DEAR /* Grab the DEAR, save it */
- stw r4, _DEAR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ save_dar_dsisr_on_stack r4, r5, r11
EXC_XFER_LITE(0x300, handle_page_fault)
/*
@@ -244,17 +241,15 @@ _ENTRY(saved_ksp_limit)
/* 0x0600 - Alignment Exception */
START_EXCEPTION(0x0600, Alignment)
- EXCEPTION_PROLOG
- mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
- stw r4,_DEAR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ save_dar_dsisr_on_stack r4, r5, r11
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_STD(0x600, alignment_exception)
/* 0x0700 - Program Exception */
START_EXCEPTION(0x0700, ProgramCheck)
- EXCEPTION_PROLOG
- mfspr r4,SPRN_ESR /* Grab the ESR and save it */
- stw r4,_ESR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ save_dar_dsisr_on_stack r4, r5, r11
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_STD(0x700, program_check_exception)
--
2.25.0
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
npiggin@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 07/41] powerpc/40x: Prepare normal exception handler for enabling MMU early
Date: Fri, 12 Mar 2021 12:50:16 +0000 (UTC) [thread overview]
Message-ID: <01963af2b83037bca270d7bf1336ffcf35da8282.1615552866.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1615552866.git.christophe.leroy@csgroup.eu>
Ensure normal exception handler are able to manage stuff with
MMU enabled. For that we use CONFIG_VMAP_STACK related code
allthough there is no intention to really activate CONFIG_VMAP_STACK
on powerpc 40x for the moment.
40x uses SPRN_DEAR instead of SPRN_DAR and SPRN_ESR instead of
SPRN_DSISR. Take it into account in common macros.
40x MSR value doesn't fit on 15 bits, use LOAD_REG_IMMEDIATE() in
common macros that will be used also with 40x.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/kernel/entry_32.S | 2 +-
arch/powerpc/kernel/head_32.h | 15 ++++++++++++++-
arch/powerpc/kernel/head_40x.S | 17 ++++++-----------
3 files changed, 21 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 8528b4c7f9d3..535c55f4393a 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -162,7 +162,7 @@ transfer_to_handler:
li r12,-1 /* clear all pending debug events */
mtspr SPRN_DBSR,r12
lis r11,global_dbcr0@ha
- tophys(r11,r11)
+ tophys_novmstack r11,r11
addi r11,r11,global_dbcr0@l
#ifdef CONFIG_SMP
lwz r9,TASK_CPU(r2)
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index 5d4706c14572..ac6b391f1493 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -22,9 +22,17 @@
#ifdef CONFIG_VMAP_STACK
mfspr r10, SPRN_SPRG_THREAD
.if \handle_dar_dsisr
+#ifdef CONFIG_40x
+ mfspr r11, SPRN_DEAR
+#else
mfspr r11, SPRN_DAR
+#endif
stw r11, DAR(r10)
+#ifdef CONFIG_40x
+ mfspr r11, SPRN_ESR
+#else
mfspr r11, SPRN_DSISR
+#endif
stw r11, DSISR(r10)
.endif
mfspr r11, SPRN_SRR0
@@ -61,7 +69,7 @@
.macro EXCEPTION_PROLOG_2 handle_dar_dsisr=0
#ifdef CONFIG_VMAP_STACK
- li r11, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
+ LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_IR | MSR_RI)) /* can take DTLB miss */
mtmsr r11
isync
mfspr r11, SPRN_SPRG_SCRATCH2
@@ -158,8 +166,13 @@
.macro save_dar_dsisr_on_stack reg1, reg2, sp
#ifndef CONFIG_VMAP_STACK
+#ifdef CONFIG_40x
+ mfspr \reg1, SPRN_DEAR
+ mfspr \reg2, SPRN_ESR
+#else
mfspr \reg1, SPRN_DAR
mfspr \reg2, SPRN_DSISR
+#endif
stw \reg1, _DAR(\sp)
stw \reg2, _DSISR(\sp)
#endif
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 1468f38c3860..4bf0aee858eb 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -221,11 +221,8 @@ _ENTRY(saved_ksp_limit)
* if they can't resolve the lightweight TLB fault.
*/
START_EXCEPTION(0x0300, DataStorage)
- EXCEPTION_PROLOG
- mfspr r5, SPRN_ESR /* Grab the ESR, save it */
- stw r5, _ESR(r11)
- mfspr r4, SPRN_DEAR /* Grab the DEAR, save it */
- stw r4, _DEAR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ save_dar_dsisr_on_stack r4, r5, r11
EXC_XFER_LITE(0x300, handle_page_fault)
/*
@@ -244,17 +241,15 @@ _ENTRY(saved_ksp_limit)
/* 0x0600 - Alignment Exception */
START_EXCEPTION(0x0600, Alignment)
- EXCEPTION_PROLOG
- mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
- stw r4,_DEAR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ save_dar_dsisr_on_stack r4, r5, r11
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_STD(0x600, alignment_exception)
/* 0x0700 - Program Exception */
START_EXCEPTION(0x0700, ProgramCheck)
- EXCEPTION_PROLOG
- mfspr r4,SPRN_ESR /* Grab the ESR and save it */
- stw r4,_ESR(r11)
+ EXCEPTION_PROLOG handle_dar_dsisr=1
+ save_dar_dsisr_on_stack r4, r5, r11
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_STD(0x700, program_check_exception)
--
2.25.0
next prev parent reply other threads:[~2021-03-12 12:51 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-12 12:50 [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit in C Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 01/41] powerpc/traps: Declare unrecoverable_exception() as __noreturn Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 02/41] powerpc/40x: Don't use SPRN_SPRG_SCRATCH0/1 in TLB miss handlers Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 03/41] powerpc/40x: Change CRITICAL_EXCEPTION_PROLOG macro to a gas macro Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 04/41] powerpc/40x: Save SRR0/SRR1 and r10/r11 earlier in critical exception Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 05/41] powerpc/40x: Reorder a few instructions in critical exception prolog Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 06/41] powerpc/40x: Prepare for enabling MMU " Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy [this message]
2021-03-12 12:50 ` [PATCH v3 07/41] powerpc/40x: Prepare normal exception handler for enabling MMU early Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 08/41] powerpc/32: Reconcile interrupts in C Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 09/41] powerpc/32: Entry cpu time accounting " Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 10/41] powerpc/32: Handle bookE debugging in C in exception entry Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 11/41] powerpc/32: Use fast instruction to set MSR RI in exception prolog on 8xx Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 12/41] powerpc/32: Remove ksp_limit Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 13/41] powerpc/32: Always enable data translation in exception prolog Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 14/41] powerpc/32: Tag DAR in EXCEPTION_PROLOG_2 for the 8xx Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 15/41] powerpc/32: Enable instruction translation at the same time as data translation Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 16/41] powerpc/32: Statically initialise first emergency context Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 17/41] powerpc/32: Add vmap_stack_overflow label inside the macro Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 18/41] powerpc/32: Use START_EXCEPTION() as much as possible Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 19/41] powerpc/32: Move exception prolog code into .text once MMU is back on Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 20/41] powerpc/32: Provide a name to exception prolog continuation in virtual mode Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 21/41] powerpc/32: Refactor booke critical registers saving Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 22/41] powerpc/32: Perform normal function call in exception entry Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 23/41] powerpc/32: Always save non volatile registers on " Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 24/41] powerpc/32: Replace ASM exception exit by C exception exit from ppc64 Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 25/41] powerpc/32: Don't save thread.regs on interrupt entry Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 26/41] powerpc/32: Set regs parameter in r3 in transfer_to_handler Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 27/41] powerpc/32: Call bad_page_fault() from do_page_fault() Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 28/41] powerpc/32: Save trap number on stack in exception prolog Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 29/41] powerpc/32: Add a prepare_transfer_to_handler macro for exception prologs Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 30/41] powerpc/32: Only restore non volatile registers when required Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 31/41] powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-07-31 10:12 ` Finn Thain
2021-07-31 10:12 ` Finn Thain
2021-07-31 15:39 ` Christophe Leroy
2021-07-31 15:39 ` Christophe Leroy
2021-08-01 1:21 ` Finn Thain
2021-08-01 1:21 ` Finn Thain
2021-08-01 6:57 ` Stan Johnson
2021-08-01 23:48 ` Finn Thain
2021-08-01 23:48 ` Finn Thain
2021-08-02 15:19 ` LEROY Christophe
2021-08-02 15:19 ` LEROY Christophe
2021-08-03 0:43 ` Finn Thain
2021-08-03 0:43 ` Finn Thain
[not found] ` <62d36dbb-4b39-f5bd-7962-4dcfbea729b3@linux-m68k.org>
[not found] ` <683c8156-97b0-5ba7-ce31-2e8613089836@yahoo.com>
2021-08-04 4:57 ` Finn Thain
2021-08-04 4:57 ` Finn Thain
2021-07-31 16:40 ` Christophe Leroy
2021-07-31 16:40 ` Christophe Leroy
2021-08-01 1:39 ` Finn Thain
2021-08-01 1:39 ` Finn Thain
2021-03-12 12:50 ` [PATCH v3 32/41] powerpc/32: Remove the xfer parameter in EXCEPTION() macro Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 33/41] powerpc/32: Refactor saving of volatile registers in exception prologs Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 34/41] powerpc/32: Save remaining registers in exception prolog Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 35/41] powerpc/32: Return directly from power_save_ppc32_restore() Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 36/41] powerpc/32: Only use prepare_transfer_to_handler function on book3s/32 and e500 Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 37/41] powerpc/32s: Move KUEP locking/unlocking in C Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-27 17:24 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 38/41] powerpc/64s: Make kuap_check_amr() and kuap_get_and_check_amr() generic Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 39/41] powerpc/32s: Create C version of kuap save/restore/check helpers Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 40/41] powerpc/8xx: " Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 41/41] powerpc/32: Manage KUAP in C Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-31 1:09 ` [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit " Michael Ellerman
2021-03-31 1:09 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=01963af2b83037bca270d7bf1336ffcf35da8282.1615552866.git.christophe.leroy@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.