All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kukjin Kim <kgene.kim@samsung.com>
To: 'Tomasz Figa' <tomasz.figa@gmail.com>, linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	devicetree-discuss@lists.ozlabs.org,
	broonie@opensource.wolfsonmicro.com, kwangwoo.lee@gmail.com,
	jacmet@sunsite.dk, augulis.darius@gmail.com,
	mcuelenaere@gmail.com, linux@arm.linux.org.uk,
	'Rob Herring' <robherring2@gmail.com>,
	'Mark Rutland' <mark.rutland@arm.com>
Subject: RE: [PATCH v3 0/4] Initial Device Tree support for S3C64xx
Date: Sat, 09 Mar 2013 18:18:26 +0900	[thread overview]
Message-ID: <042b01ce1ca7$0e9ba2c0$2bd2e840$%kim@samsung.com> (raw)
In-Reply-To: <1361036261-8315-1-git-send-email-tomasz.figa@gmail.com>

Tomasz Figa wrote:
> 
> This series adds Device Tree support for Samsung S3C64xx SoC series.
> 
> It fixes several problems preventing from booting an S3C64xx-based system
> using Device Tree, adds all the infrastructure for Device Tree-based board
> support, including mach-s3c64xx-dt and dts include files for S3C64xx SoCs, and
> (very) basic device tree source for FriendlyARM Mini6410 board.
> 
> Current support is very limited and allows only basic bootup with UART and
> SDHCI, but should be fine as a start and will be extended in future, hopefully
> with help of S3C64xx board maintainers.
> 
> This series depends on my other series reworking samsung-time for
> multiplatform:
> [PATCH v2 00/12] ARM: samsung-time: Prepare for multiplatform support
> http://thread.gmane.org/gmane.linux.kernel.samsung-soc/16158
> 
Tomasz, can you address comments from ml for above patches? So that this could
be sent to upstream together :-)

- Kukjin

> Changes since v2:
>  - Updated timer node for next version of samsung-time patches
> 
> Changes since v1:
>  - Dropped two VIC-related patches that are no longer necessary
>  - Added Device Tree-based instantation of system timers
>  - Corrected VIC interrupt specifiers
>  - Adjusted CPU compatible values and dropped @id
> 
> Tomasz Figa (4):
>   ARM: common: vic: Parse interrupt and resume masks from device tree
>   ARM: s3c64xx: Add board file for boot using Device Tree
>   ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
>   ARM: dts: Add dts file for S3C6410-based Mini6410 board
> 
>  Documentation/devicetree/bindings/arm/vic.txt |   6 ++
>  arch/arm/boot/dts/Makefile                    |   1 +
>  arch/arm/boot/dts/s3c6400.dtsi                |  33 ++++++++
>  arch/arm/boot/dts/s3c6410-mini6410.dts        |  50 +++++++++++++
>  arch/arm/boot/dts/s3c6410.dtsi                |  33 ++++++++
>  arch/arm/boot/dts/s3c64xx.dtsi                | 104
++++++++++++++++++++++++++
>  arch/arm/common/vic.c                         |   7 +-
>  arch/arm/mach-s3c64xx/Kconfig                 |  14 ++++
>  arch/arm/mach-s3c64xx/Makefile                |   1 +
>  arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c       |  94 +++++++++++++++++++++++
>  10 files changed, 342 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/s3c6400.dtsi
>  create mode 100644 arch/arm/boot/dts/s3c6410-mini6410.dts
>  create mode 100644 arch/arm/boot/dts/s3c6410.dtsi
>  create mode 100644 arch/arm/boot/dts/s3c64xx.dtsi
>  create mode 100644 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
> 
> --
> 1.8.1.2

WARNING: multiple messages have this Message-ID (diff)
From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] Initial Device Tree support for S3C64xx
Date: Sat, 09 Mar 2013 18:18:26 +0900	[thread overview]
Message-ID: <042b01ce1ca7$0e9ba2c0$2bd2e840$%kim@samsung.com> (raw)
In-Reply-To: <1361036261-8315-1-git-send-email-tomasz.figa@gmail.com>

Tomasz Figa wrote:
> 
> This series adds Device Tree support for Samsung S3C64xx SoC series.
> 
> It fixes several problems preventing from booting an S3C64xx-based system
> using Device Tree, adds all the infrastructure for Device Tree-based board
> support, including mach-s3c64xx-dt and dts include files for S3C64xx SoCs, and
> (very) basic device tree source for FriendlyARM Mini6410 board.
> 
> Current support is very limited and allows only basic bootup with UART and
> SDHCI, but should be fine as a start and will be extended in future, hopefully
> with help of S3C64xx board maintainers.
> 
> This series depends on my other series reworking samsung-time for
> multiplatform:
> [PATCH v2 00/12] ARM: samsung-time: Prepare for multiplatform support
> http://thread.gmane.org/gmane.linux.kernel.samsung-soc/16158
> 
Tomasz, can you address comments from ml for above patches? So that this could
be sent to upstream together :-)

- Kukjin

> Changes since v2:
>  - Updated timer node for next version of samsung-time patches
> 
> Changes since v1:
>  - Dropped two VIC-related patches that are no longer necessary
>  - Added Device Tree-based instantation of system timers
>  - Corrected VIC interrupt specifiers
>  - Adjusted CPU compatible values and dropped @id
> 
> Tomasz Figa (4):
>   ARM: common: vic: Parse interrupt and resume masks from device tree
>   ARM: s3c64xx: Add board file for boot using Device Tree
>   ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
>   ARM: dts: Add dts file for S3C6410-based Mini6410 board
> 
>  Documentation/devicetree/bindings/arm/vic.txt |   6 ++
>  arch/arm/boot/dts/Makefile                    |   1 +
>  arch/arm/boot/dts/s3c6400.dtsi                |  33 ++++++++
>  arch/arm/boot/dts/s3c6410-mini6410.dts        |  50 +++++++++++++
>  arch/arm/boot/dts/s3c6410.dtsi                |  33 ++++++++
>  arch/arm/boot/dts/s3c64xx.dtsi                | 104
++++++++++++++++++++++++++
>  arch/arm/common/vic.c                         |   7 +-
>  arch/arm/mach-s3c64xx/Kconfig                 |  14 ++++
>  arch/arm/mach-s3c64xx/Makefile                |   1 +
>  arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c       |  94 +++++++++++++++++++++++
>  10 files changed, 342 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/s3c6400.dtsi
>  create mode 100644 arch/arm/boot/dts/s3c6410-mini6410.dts
>  create mode 100644 arch/arm/boot/dts/s3c6410.dtsi
>  create mode 100644 arch/arm/boot/dts/s3c64xx.dtsi
>  create mode 100644 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
> 
> --
> 1.8.1.2

  parent reply	other threads:[~2013-03-09  9:18 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-16 17:37 [PATCH v3 0/4] Initial Device Tree support for S3C64xx Tomasz Figa
2013-02-16 17:37 ` Tomasz Figa
2013-02-16 17:37 ` [PATCH v3 1/4] ARM: common: vic: Parse interrupt and resume masks from device tree Tomasz Figa
2013-02-16 17:37   ` Tomasz Figa
2013-02-16 17:37 ` [PATCH v3 2/4] ARM: s3c64xx: Add board file for boot using Device Tree Tomasz Figa
2013-02-16 17:37   ` Tomasz Figa
2013-02-16 17:37 ` [PATCH v3 3/4] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs Tomasz Figa
2013-02-16 17:37   ` Tomasz Figa
2013-02-16 17:37 ` [PATCH v3 4/4] ARM: dts: Add dts file for S3C6410-based Mini6410 board Tomasz Figa
2013-02-16 17:37   ` Tomasz Figa
2013-03-09  9:18 ` Kukjin Kim [this message]
2013-03-09  9:18   ` [PATCH v3 0/4] Initial Device Tree support for S3C64xx Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='042b01ce1ca7$0e9ba2c0$2bd2e840$%kim@samsung.com' \
    --to=kgene.kim@samsung.com \
    --cc=augulis.darius@gmail.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=jacmet@sunsite.dk \
    --cc=kwangwoo.lee@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mcuelenaere@gmail.com \
    --cc=robherring2@gmail.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.