From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 17/70] ARM: dts: r8a7778: use GIC_* defines
Date: Thu, 4 Feb 2016 15:29:11 +0100 [thread overview]
Message-ID: <0c34bd1e00b0c60407ede0ca0d49862ef6116fa5.1454595846.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1454595846.git.horms+renesas@verge.net.au>
Use GIC_* defines for GIC interrupt cells in r8a7778 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7778.dtsi | 87 +++++++++++++++++++++---------------------
1 file changed, 44 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 791aafd310a5..fc5e7243467a 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -17,6 +17,7 @@
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/r8a7778-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -51,7 +52,7 @@
ether: ethernet at fde00000 {
compatible = "renesas,ether-r8a7778";
reg = <0xfde00000 0x400>;
- interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7778_CLK_ETHER>;
power-domains = <&cpg_clocks>;
phy-mode = "rmii";
@@ -79,17 +80,17 @@
<0xfe780024 4>,
<0xfe780044 4>,
<0xfe780064 4>;
- interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
- 0 28 IRQ_TYPE_LEVEL_HIGH
- 0 29 IRQ_TYPE_LEVEL_HIGH
- 0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
sense-bitfield-width = <2>;
};
gpio0: gpio at ffc40000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -100,7 +101,7 @@
gpio1: gpio at ffc41000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc41000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
@@ -111,7 +112,7 @@
gpio2: gpio at ffc42000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc42000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -122,7 +123,7 @@
gpio3: gpio at ffc43000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc43000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -133,7 +134,7 @@
gpio4: gpio at ffc44000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc44000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 27>;
@@ -151,7 +152,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc70000 0x1000>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -162,7 +163,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc71000 0x1000>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -173,7 +174,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc72000 0x1000>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -184,7 +185,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc73000 0x1000>;
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -193,9 +194,9 @@
tmu0: timer at ffd80000 {
compatible = "renesas,tmu-r8a7778", "renesas,tmu";
reg = <0xffd80000 0x30>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
- <0 33 IRQ_TYPE_LEVEL_HIGH>,
- <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -208,9 +209,9 @@
tmu1: timer at ffd81000 {
compatible = "renesas,tmu-r8a7778", "renesas,tmu";
reg = <0xffd81000 0x30>;
- interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
- <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -223,9 +224,9 @@
tmu2: timer at ffd82000 {
compatible = "renesas,tmu-r8a7778", "renesas,tmu";
reg = <0xffd82000 0x30>;
- interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
- <0 41 IRQ_TYPE_LEVEL_HIGH>,
- <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -285,20 +286,20 @@
};
rcar_sound,ssi {
- ssi3: ssi at 3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
- ssi4: ssi at 4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
- ssi5: ssi at 5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi6: ssi at 6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi7: ssi at 7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi8: ssi at 8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi9: ssi at 9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi3: ssi at 3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi4: ssi at 4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi5: ssi at 5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi6: ssi at 6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi7: ssi at 7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi8: ssi at 8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi9: ssi at 9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
};
};
scif0: serial at ffe40000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe40000 0x100>;
- interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -308,7 +309,7 @@
scif1: serial at ffe41000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe41000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -318,7 +319,7 @@
scif2: serial at ffe42000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe42000 0x100>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -328,7 +329,7 @@
scif3: serial at ffe43000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe43000 0x100>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -338,7 +339,7 @@
scif4: serial at ffe44000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe44000 0x100>;
- interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -348,7 +349,7 @@
scif5: serial at ffe45000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe45000 0x100>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -358,7 +359,7 @@
mmcif: mmc at ffe4e000 {
compatible = "renesas,sh-mmcif";
reg = <0xffe4e000 0x100>;
- interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_MMC>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -367,7 +368,7 @@
sdhi0: sd at ffe4c000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4c000 0x100>;
- interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -376,7 +377,7 @@
sdhi1: sd at ffe4d000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4d000 0x100>;
- interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -385,7 +386,7 @@
sdhi2: sd at ffe4f000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4f000 0x100>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -394,7 +395,7 @@
hspi0: spi at fffc7000 {
compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc7000 0x18>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -405,7 +406,7 @@
hspi1: spi at fffc8000 {
compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc8000 0x18>;
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -416,7 +417,7 @@
hspi2: spi at fffc6000 {
compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc6000 0x18>;
- interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
--
2.7.0.rc3.207.g0ac5344
next prev parent reply other threads:[~2016-02-04 14:29 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
2016-02-04 14:28 ` [PATCH 01/70] ARM: dts: gose: Add GPIO keys to DT Simon Horman
2016-02-04 14:28 ` [PATCH 02/70] ARM: dts: gose: Add GPIO leds " Simon Horman
2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` [PATCH 03/70] ARM: dts: porter: add DU DT support Simon Horman
2016-02-04 14:28 ` [PATCH 04/70] ARM: dts: r8a7793: Add I2C master nodes to DT Simon Horman
2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` [PATCH 05/70] ARM: dts: alt: Add QSPI device " Simon Horman
2016-02-04 14:28 ` Simon Horman
2016-02-04 14:29 ` [PATCH 06/70] ARM: dts: r8a7790: use fallback usbhs compatibility string Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 07/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 08/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` [PATCH 09/70] ARM: dts: r8a7793: move dmac nodes Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 10/70] ARM: dts: gose: add i2c2 bus to device tree Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 11/70] ARM: dts: r8a7790: use GIC_* defines Simon Horman
2016-02-04 14:29 ` [PATCH 12/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` [PATCH 13/70] ARM: dts: silk: add DU DT support Simon Horman
2016-02-04 14:29 ` [PATCH 14/70] ARM: dts: r8a7793: use GIC_* defines Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 15/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 16/70] ARM: dts: r8a7793: gose: Add HDMI video out support Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman [this message]
2016-02-04 14:29 ` [PATCH 18/70] ARM: dts: r8a7779: use GIC_* defines Simon Horman
2016-02-04 14:29 ` [PATCH 19/70] ARM: dts: porter: add sound support Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 20/70] ARM: dts: r8a73a4: use GIC_* defines Simon Horman
2016-02-04 14:29 ` [PATCH 21/70] ARM: dts: r8a7740: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 22/70] ARM: dts: r8a7793: add MSTP10 clocks to device tree Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 23/70] ARM: dts: r8a7793: add audio clock " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 24/70] ARM: dts: r8a7793: add m2 " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 25/70] ARM: dts: r8a7793: add R-Car sound support " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 26/70] ARM: dts: r8a7793: add DVC " Simon Horman
2016-02-04 14:29 ` [PATCH 27/70] ARM: dts: r8a7793: add audio DMAC clocks " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 28/70] ARM: dts: r8a7793: add audio DMAC " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 29/70] ARM: dts: r8a7793: enable Audio DMAC peri peri via sound driver Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 30/70] ARM: dts: gose: Enable sound PIO support in device tree Simon Horman
2016-02-04 14:29 ` [PATCH 31/70] ARM: dts: gose: enable sound DMA " Simon Horman
2016-02-04 14:29 ` [PATCH 32/70] ARM: dts: gose: enable sound DMA support via BUSIF " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 33/70] ARM: dts: gose: enable sound DMA support via SRC " Simon Horman
2016-02-04 14:29 ` [PATCH 34/70] ARM: dts: gose: enable sound DMA support via DVC " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 35/70] ARM: dts: r8a7793: enable audio DMAC " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 36/70] ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 37/70] ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 38/70] ARM: dts: r7s72100: use GIC_* defines Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 39/70] ARM: dts: sh73a0: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 40/70] ARM: dts: emev2: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 41/70] ARM: dts: r8a7778: Add SCIF fallback compatibility strings Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 42/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 43/70] ARM: dts: r8a7790: " Simon Horman
2016-02-04 14:29 ` [PATCH 44/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 45/70] ARM: dts: r8a7793: " Simon Horman
2016-02-04 14:29 ` [PATCH 46/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 47/70] ARM: dts: sh73a0: Rename the serial port clock to fck Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 48/70] ARM: dts: r7s72100: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 49/70] ARM: dts: r8a73a4: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 50/70] ARM: dts: r8a7740: " Simon Horman
2016-02-04 14:29 ` [PATCH 51/70] ARM: dts: r8a7778: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 52/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 53/70] ARM: dts: r8a7790: " Simon Horman
2016-02-04 14:29 ` [PATCH 54/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` [PATCH 55/70] ARM: dts: r8a7793: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 56/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 57/70] ARM: dts: r8a7778: Add BRG support for SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 58/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 59/70] ARM: dts: r8a7790: Add BRG support for (H)SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 60/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 61/70] ARM: dts: r8a7793: Add BRG support for SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 62/70] ARM: dts: r8a7794: Add BRG support for (H)SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 63/70] ARM: dts: alt: Enable SCIF_CLK frequency and pins Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 64/70] ARM: dts: bockw: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 65/70] ARM: dts: gose: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:30 ` [PATCH 66/70] ARM: dts: koelsch: " Simon Horman
2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 67/70] ARM: dts: lager: " Simon Horman
2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 68/70] ARM: dts: marzen: " Simon Horman
2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 69/70] ARM: dts: porter: " Simon Horman
2016-02-04 14:30 ` [PATCH 70/70] ARM: dts: silk: " Simon Horman
2016-02-08 21:51 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Olof Johansson
2016-02-09 7:39 ` Geert Uytterhoeven
2016-02-09 18:39 ` Simon Horman
2016-02-11 3:55 ` Olof Johansson
2016-02-11 17:22 ` Simon Horman
2016-02-11 21:22 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0c34bd1e00b0c60407ede0ca0d49862ef6116fa5.1454595846.git.horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.