From: Simon Horman <horms+renesas@verge.net.au>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Magnus Damm <magnus.damm@gmail.com>,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH 04/70] ARM: dts: r8a7793: Add I2C master nodes to DT
Date: Thu, 4 Feb 2016 15:28:58 +0100 [thread overview]
Message-ID: <7aed17f4450ba6863937797d88dab64088f38ccc.1454595846.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1454595846.git.horms+renesas@verge.net.au>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Instantiate all the 9 I2C controllers in the disabled state.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 135 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 132 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index aef9e69d6c26..f9d92de4f65b 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -19,6 +19,15 @@
#size-cells = <2>;
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
spi0 = &qspi;
};
@@ -230,6 +239,120 @@
power-domains = <&cpg_clocks>;
};
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e60b0000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7793";
reg = <0 0xe6060000 0 0x250>;
@@ -820,19 +943,25 @@
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
<&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cpg_clocks R8A7793_CLK_QSPI>;
+ <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
+ <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
- R8A7793_CLK_QSPI_MOD
+ R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5
+ R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
+ R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
+ R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
>;
clock-output-names =
"gpio7", "gpio6", "gpio5", "gpio4",
"gpio3", "gpio2", "gpio1", "gpio0",
- "qspi_mod";
+ "qspi_mod", "i2c5", "i2c6", "i2c4",
+ "i2c3", "i2c2", "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
--
2.7.0.rc3.207.g0ac5344
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/70] ARM: dts: r8a7793: Add I2C master nodes to DT
Date: Thu, 4 Feb 2016 15:28:58 +0100 [thread overview]
Message-ID: <7aed17f4450ba6863937797d88dab64088f38ccc.1454595846.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1454595846.git.horms+renesas@verge.net.au>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Instantiate all the 9 I2C controllers in the disabled state.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 135 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 132 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index aef9e69d6c26..f9d92de4f65b 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -19,6 +19,15 @@
#size-cells = <2>;
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
spi0 = &qspi;
};
@@ -230,6 +239,120 @@
power-domains = <&cpg_clocks>;
};
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c at e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at e6528000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c at e60b0000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c7: i2c at e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c8: i2c at e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
pfc: pfc at e6060000 {
compatible = "renesas,pfc-r8a7793";
reg = <0 0xe6060000 0 0x250>;
@@ -820,19 +943,25 @@
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
<&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cpg_clocks R8A7793_CLK_QSPI>;
+ <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
+ <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
- R8A7793_CLK_QSPI_MOD
+ R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5
+ R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
+ R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
+ R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
>;
clock-output-names =
"gpio7", "gpio6", "gpio5", "gpio4",
"gpio3", "gpio2", "gpio1", "gpio0",
- "qspi_mod";
+ "qspi_mod", "i2c5", "i2c6", "i2c4",
+ "i2c3", "i2c2", "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks at e615099c {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
--
2.7.0.rc3.207.g0ac5344
next prev parent reply other threads:[~2016-02-04 14:28 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
2016-02-04 14:28 ` [PATCH 01/70] ARM: dts: gose: Add GPIO keys to DT Simon Horman
2016-02-04 14:28 ` [PATCH 02/70] ARM: dts: gose: Add GPIO leds " Simon Horman
2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` [PATCH 03/70] ARM: dts: porter: add DU DT support Simon Horman
2016-02-04 14:28 ` Simon Horman [this message]
2016-02-04 14:28 ` [PATCH 04/70] ARM: dts: r8a7793: Add I2C master nodes to DT Simon Horman
2016-02-04 14:28 ` [PATCH 05/70] ARM: dts: alt: Add QSPI device " Simon Horman
2016-02-04 14:28 ` Simon Horman
2016-02-04 14:29 ` [PATCH 06/70] ARM: dts: r8a7790: use fallback usbhs compatibility string Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 07/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 08/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` [PATCH 09/70] ARM: dts: r8a7793: move dmac nodes Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 10/70] ARM: dts: gose: add i2c2 bus to device tree Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 11/70] ARM: dts: r8a7790: use GIC_* defines Simon Horman
2016-02-04 14:29 ` [PATCH 12/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` [PATCH 13/70] ARM: dts: silk: add DU DT support Simon Horman
2016-02-04 14:29 ` [PATCH 14/70] ARM: dts: r8a7793: use GIC_* defines Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 15/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 16/70] ARM: dts: r8a7793: gose: Add HDMI video out support Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 17/70] ARM: dts: r8a7778: use GIC_* defines Simon Horman
2016-02-04 14:29 ` [PATCH 18/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` [PATCH 19/70] ARM: dts: porter: add sound support Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 20/70] ARM: dts: r8a73a4: use GIC_* defines Simon Horman
2016-02-04 14:29 ` [PATCH 21/70] ARM: dts: r8a7740: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 22/70] ARM: dts: r8a7793: add MSTP10 clocks to device tree Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 23/70] ARM: dts: r8a7793: add audio clock " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 24/70] ARM: dts: r8a7793: add m2 " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 25/70] ARM: dts: r8a7793: add R-Car sound support " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 26/70] ARM: dts: r8a7793: add DVC " Simon Horman
2016-02-04 14:29 ` [PATCH 27/70] ARM: dts: r8a7793: add audio DMAC clocks " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 28/70] ARM: dts: r8a7793: add audio DMAC " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 29/70] ARM: dts: r8a7793: enable Audio DMAC peri peri via sound driver Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 30/70] ARM: dts: gose: Enable sound PIO support in device tree Simon Horman
2016-02-04 14:29 ` [PATCH 31/70] ARM: dts: gose: enable sound DMA " Simon Horman
2016-02-04 14:29 ` [PATCH 32/70] ARM: dts: gose: enable sound DMA support via BUSIF " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 33/70] ARM: dts: gose: enable sound DMA support via SRC " Simon Horman
2016-02-04 14:29 ` [PATCH 34/70] ARM: dts: gose: enable sound DMA support via DVC " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 35/70] ARM: dts: r8a7793: enable audio DMAC " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 36/70] ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 37/70] ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 38/70] ARM: dts: r7s72100: use GIC_* defines Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 39/70] ARM: dts: sh73a0: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 40/70] ARM: dts: emev2: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 41/70] ARM: dts: r8a7778: Add SCIF fallback compatibility strings Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 42/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 43/70] ARM: dts: r8a7790: " Simon Horman
2016-02-04 14:29 ` [PATCH 44/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 45/70] ARM: dts: r8a7793: " Simon Horman
2016-02-04 14:29 ` [PATCH 46/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 47/70] ARM: dts: sh73a0: Rename the serial port clock to fck Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 48/70] ARM: dts: r7s72100: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 49/70] ARM: dts: r8a73a4: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 50/70] ARM: dts: r8a7740: " Simon Horman
2016-02-04 14:29 ` [PATCH 51/70] ARM: dts: r8a7778: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 52/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 53/70] ARM: dts: r8a7790: " Simon Horman
2016-02-04 14:29 ` [PATCH 54/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` [PATCH 55/70] ARM: dts: r8a7793: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 56/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 57/70] ARM: dts: r8a7778: Add BRG support for SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 58/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 59/70] ARM: dts: r8a7790: Add BRG support for (H)SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 60/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 61/70] ARM: dts: r8a7793: Add BRG support for SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 62/70] ARM: dts: r8a7794: Add BRG support for (H)SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 63/70] ARM: dts: alt: Enable SCIF_CLK frequency and pins Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 64/70] ARM: dts: bockw: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 65/70] ARM: dts: gose: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:30 ` [PATCH 66/70] ARM: dts: koelsch: " Simon Horman
2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 67/70] ARM: dts: lager: " Simon Horman
2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 68/70] ARM: dts: marzen: " Simon Horman
2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 69/70] ARM: dts: porter: " Simon Horman
2016-02-04 14:30 ` [PATCH 70/70] ARM: dts: silk: " Simon Horman
2016-02-08 21:51 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Olof Johansson
2016-02-09 7:39 ` Geert Uytterhoeven
2016-02-09 18:39 ` Simon Horman
2016-02-11 3:55 ` Olof Johansson
2016-02-11 17:22 ` Simon Horman
2016-02-11 21:22 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7aed17f4450ba6863937797d88dab64088f38ccc.1454595846.git.horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.