From: Geert Uytterhoeven <geert+renesas@glider.be> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, Avi Fishman <avifishman70@gmail.com>, Tomer Maimon <tmaimon77@gmail.com>, Tali Perry <tali.perry1@gmail.com> Cc: soc@kernel.org, openbmc@lists.ozlabs.org, devicetree@vger.kernel.org, "Geert Uytterhoeven" <geert+renesas@glider.be>, "Philippe Mathieu-Daudé" <philmd@linaro.org> Subject: [PATCH v2 resend] ARM: dts: nuvoton: Fix pca954x i2c-mux node names Date: Mon, 17 Jul 2023 15:32:13 +0200 [thread overview] Message-ID: <0e5625985cecd70e0f766da8eace6c6f7ae3192e.1689600667.git.geert+renesas@glider.be> (raw) "make dtbs_check": arch/arm/boot/dts/nuvoton-npcm730-gbs.dtb: i2c-switch@71: $nodename:0: 'i2c-switch@71' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- v2: - Add Reviewed-by. --- .../arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts | 16 ++++++++-------- .../arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts | 2 +- .../boot/dts/nuvoton/nuvoton-npcm730-kudo.dts | 8 ++++---- .../nuvoton/nuvoton-npcm750-runbmc-olympus.dts | 4 ++-- 4 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts index 9e9eba8bad5e424a..9f64c85e1c206494 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts @@ -525,7 +525,7 @@ &i2c0 { clock-frequency = <100000>; status = "okay"; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>; @@ -666,7 +666,7 @@ mb_fru@50 { reg = <0x50>; }; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>; @@ -727,7 +727,7 @@ &i2c6 { clock-frequency = <100000>; status = "okay"; - i2c-switch@73 { + i2c-mux@73 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; @@ -763,7 +763,7 @@ &i2c7 { clock-frequency = <100000>; status = "okay"; - i2c-switch@72 { + i2c-mux@72 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; @@ -812,7 +812,7 @@ &i2c9 { clock-frequency = <100000>; status = "okay"; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>; @@ -866,7 +866,7 @@ &i2c10 { clock-frequency = <100000>; status = "okay"; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; @@ -902,7 +902,7 @@ &i2c11 { clock-frequency = <100000>; status = "okay"; - i2c-switch@76 { + i2c-mux@76 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; @@ -961,7 +961,7 @@ &i2c14 { clock-frequency = <100000>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts index 2a394cc15284c55d..9b1cc7f4adf0909d 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts @@ -303,7 +303,7 @@ ucd90160@6b { &i2c15 { status = "okay"; - i2c-switch@75 { + i2c-mux@75 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts index f7b38bee039bcab5..58329adbd9186fd7 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts @@ -494,7 +494,7 @@ &adc { &i2c1 { status = "okay"; - i2c-switch@75 { + i2c-mux@75 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -573,7 +573,7 @@ lm75@5c { }; }; }; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -613,7 +613,7 @@ &i2c3 { &i2c4 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -684,7 +684,7 @@ ssif-bmc@10 { &i2c13 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts index 87359ab05db3ebab..209fa3400317bf19 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts @@ -208,7 +208,7 @@ &gmac0 { &i2c1 { status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -258,7 +258,7 @@ i2c_slot5: i2c-bus@6 { }; }; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9546"; reg = <0x71>; #address-cells = <1>; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, Avi Fishman <avifishman70@gmail.com>, Tomer Maimon <tmaimon77@gmail.com>, Tali Perry <tali.perry1@gmail.com> Cc: devicetree@vger.kernel.org, soc@kernel.org, "Philippe Mathieu-Daudé" <philmd@linaro.org>, openbmc@lists.ozlabs.org, "Geert Uytterhoeven" <geert+renesas@glider.be> Subject: [PATCH v2 resend] ARM: dts: nuvoton: Fix pca954x i2c-mux node names Date: Mon, 17 Jul 2023 15:32:13 +0200 [thread overview] Message-ID: <0e5625985cecd70e0f766da8eace6c6f7ae3192e.1689600667.git.geert+renesas@glider.be> (raw) "make dtbs_check": arch/arm/boot/dts/nuvoton-npcm730-gbs.dtb: i2c-switch@71: $nodename:0: 'i2c-switch@71' does not match '^(i2c-?)?mux' From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml ... Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- v2: - Add Reviewed-by. --- .../arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts | 16 ++++++++-------- .../arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts | 2 +- .../boot/dts/nuvoton/nuvoton-npcm730-kudo.dts | 8 ++++---- .../nuvoton/nuvoton-npcm750-runbmc-olympus.dts | 4 ++-- 4 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts index 9e9eba8bad5e424a..9f64c85e1c206494 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts @@ -525,7 +525,7 @@ &i2c0 { clock-frequency = <100000>; status = "okay"; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>; @@ -666,7 +666,7 @@ mb_fru@50 { reg = <0x50>; }; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>; @@ -727,7 +727,7 @@ &i2c6 { clock-frequency = <100000>; status = "okay"; - i2c-switch@73 { + i2c-mux@73 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; @@ -763,7 +763,7 @@ &i2c7 { clock-frequency = <100000>; status = "okay"; - i2c-switch@72 { + i2c-mux@72 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; @@ -812,7 +812,7 @@ &i2c9 { clock-frequency = <100000>; status = "okay"; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>; @@ -866,7 +866,7 @@ &i2c10 { clock-frequency = <100000>; status = "okay"; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; @@ -902,7 +902,7 @@ &i2c11 { clock-frequency = <100000>; status = "okay"; - i2c-switch@76 { + i2c-mux@76 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; @@ -961,7 +961,7 @@ &i2c14 { clock-frequency = <100000>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts index 2a394cc15284c55d..9b1cc7f4adf0909d 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts @@ -303,7 +303,7 @@ ucd90160@6b { &i2c15 { status = "okay"; - i2c-switch@75 { + i2c-mux@75 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts index f7b38bee039bcab5..58329adbd9186fd7 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts @@ -494,7 +494,7 @@ &adc { &i2c1 { status = "okay"; - i2c-switch@75 { + i2c-mux@75 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -573,7 +573,7 @@ lm75@5c { }; }; }; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -613,7 +613,7 @@ &i2c3 { &i2c4 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -684,7 +684,7 @@ ssif-bmc@10 { &i2c13 { status = "okay"; - i2c-switch@77 { + i2c-mux@77 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts index 87359ab05db3ebab..209fa3400317bf19 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts @@ -208,7 +208,7 @@ &gmac0 { &i2c1 { status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -258,7 +258,7 @@ i2c_slot5: i2c-bus@6 { }; }; - i2c-switch@71 { + i2c-mux@71 { compatible = "nxp,pca9546"; reg = <0x71>; #address-cells = <1>; -- 2.34.1
next reply other threads:[~2023-07-17 13:32 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-07-17 13:32 Geert Uytterhoeven [this message] 2023-07-17 13:32 ` [PATCH v2 resend] ARM: dts: nuvoton: Fix pca954x i2c-mux node names Geert Uytterhoeven 2023-08-12 12:50 ` patchwork-bot+linux-soc
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=0e5625985cecd70e0f766da8eace6c6f7ae3192e.1689600667.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=arnd@arndb.de \ --cc=avifishman70@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=olof@lixom.net \ --cc=openbmc@lists.ozlabs.org \ --cc=philmd@linaro.org \ --cc=soc@kernel.org \ --cc=tali.perry1@gmail.com \ --cc=tmaimon77@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.