From: Christophe Leroy <christophe.leroy@csgroup.eu> To: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>, Michael Ellerman <mpe@ellerman.id.au>, chris.packham@alliedtelesis.co.nz Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org Subject: [PATCH v2 2/2] powerpc/legacy_serial: Use early_ioremap() Date: Tue, 20 Apr 2021 13:32:49 +0000 (UTC) [thread overview] Message-ID: <103ed8ee9e5973c958ec1da2d0b0764f69395d01.1618925560.git.christophe.leroy@csgroup.eu> (raw) In-Reply-To: <0d51620eacf036d683d1a3c41328f69adb601dc0.1618925560.git.christophe.leroy@csgroup.eu> From: Christophe Leroy <christophe.leroy@c-s.fr> [ 0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead find_legacy_serial_ports() is called early from setup_arch(), before paging_init(). vmalloc is not available yet, ioremap shouldn't be used that early. Use early_ioremap() and switch to a regular ioremap() later. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- arch/powerpc/kernel/legacy_serial.c | 33 +++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index f061e06e9f51..8b2c1a8553a0 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -15,6 +15,7 @@ #include <asm/udbg.h> #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> +#include <asm/early_ioremap.h> #undef DEBUG @@ -34,6 +35,7 @@ static struct legacy_serial_info { unsigned int clock; int irq_check_parent; phys_addr_t taddr; + void __iomem *early_addr; } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS]; static const struct of_device_id legacy_serial_parents[] __initconst = { @@ -325,17 +327,16 @@ static void __init setup_legacy_serial_console(int console) { struct legacy_serial_info *info = &legacy_serial_infos[console]; struct plat_serial8250_port *port = &legacy_serial_ports[console]; - void __iomem *addr; unsigned int stride; stride = 1 << port->regshift; /* Check if a translated MMIO address has been found */ if (info->taddr) { - addr = ioremap(info->taddr, 0x1000); - if (addr == NULL) + info->early_addr = early_ioremap(info->taddr, 0x1000); + if (info->early_addr == NULL) return; - udbg_uart_init_mmio(addr, stride); + udbg_uart_init_mmio(info->early_addr, stride); } else { /* Check if it's PIO and we support untranslated PIO */ if (port->iotype == UPIO_PORT && isa_io_special) @@ -353,6 +354,30 @@ static void __init setup_legacy_serial_console(int console) udbg_uart_setup(info->speed, info->clock); } +static int __init ioremap_legacy_serial_console(void) +{ + struct legacy_serial_info *info = &legacy_serial_infos[legacy_serial_console]; + struct plat_serial8250_port *port = &legacy_serial_ports[legacy_serial_console]; + void __iomem *vaddr; + + if (legacy_serial_console < 0) + return 0; + + if (!info->early_addr) + return 0; + + vaddr = ioremap(info->taddr, 0x1000); + if (WARN_ON(!vaddr)) + return -ENOMEM; + + udbg_uart_init_mmio(vaddr, 1 << port->regshift); + early_iounmap(info->early_addr, 0x1000); + info->early_addr = NULL; + + return 0; +} +early_initcall(ioremap_legacy_serial_console); + /* * This is called very early, as part of setup_system() or eventually * setup_arch(), basically before anything else in this file. This function -- 2.25.0
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu> To: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>, Michael Ellerman <mpe@ellerman.id.au>, chris.packham@alliedtelesis.co.nz Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/2] powerpc/legacy_serial: Use early_ioremap() Date: Tue, 20 Apr 2021 13:32:49 +0000 (UTC) [thread overview] Message-ID: <103ed8ee9e5973c958ec1da2d0b0764f69395d01.1618925560.git.christophe.leroy@csgroup.eu> (raw) In-Reply-To: <0d51620eacf036d683d1a3c41328f69adb601dc0.1618925560.git.christophe.leroy@csgroup.eu> From: Christophe Leroy <christophe.leroy@c-s.fr> [ 0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead find_legacy_serial_ports() is called early from setup_arch(), before paging_init(). vmalloc is not available yet, ioremap shouldn't be used that early. Use early_ioremap() and switch to a regular ioremap() later. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- arch/powerpc/kernel/legacy_serial.c | 33 +++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index f061e06e9f51..8b2c1a8553a0 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -15,6 +15,7 @@ #include <asm/udbg.h> #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> +#include <asm/early_ioremap.h> #undef DEBUG @@ -34,6 +35,7 @@ static struct legacy_serial_info { unsigned int clock; int irq_check_parent; phys_addr_t taddr; + void __iomem *early_addr; } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS]; static const struct of_device_id legacy_serial_parents[] __initconst = { @@ -325,17 +327,16 @@ static void __init setup_legacy_serial_console(int console) { struct legacy_serial_info *info = &legacy_serial_infos[console]; struct plat_serial8250_port *port = &legacy_serial_ports[console]; - void __iomem *addr; unsigned int stride; stride = 1 << port->regshift; /* Check if a translated MMIO address has been found */ if (info->taddr) { - addr = ioremap(info->taddr, 0x1000); - if (addr == NULL) + info->early_addr = early_ioremap(info->taddr, 0x1000); + if (info->early_addr == NULL) return; - udbg_uart_init_mmio(addr, stride); + udbg_uart_init_mmio(info->early_addr, stride); } else { /* Check if it's PIO and we support untranslated PIO */ if (port->iotype == UPIO_PORT && isa_io_special) @@ -353,6 +354,30 @@ static void __init setup_legacy_serial_console(int console) udbg_uart_setup(info->speed, info->clock); } +static int __init ioremap_legacy_serial_console(void) +{ + struct legacy_serial_info *info = &legacy_serial_infos[legacy_serial_console]; + struct plat_serial8250_port *port = &legacy_serial_ports[legacy_serial_console]; + void __iomem *vaddr; + + if (legacy_serial_console < 0) + return 0; + + if (!info->early_addr) + return 0; + + vaddr = ioremap(info->taddr, 0x1000); + if (WARN_ON(!vaddr)) + return -ENOMEM; + + udbg_uart_init_mmio(vaddr, 1 << port->regshift); + early_iounmap(info->early_addr, 0x1000); + info->early_addr = NULL; + + return 0; +} +early_initcall(ioremap_legacy_serial_console); + /* * This is called very early, as part of setup_system() or eventually * setup_arch(), basically before anything else in this file. This function -- 2.25.0
next prev parent reply other threads:[~2021-04-20 13:33 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-04-20 13:32 [PATCH v2 1/2] powerpc/64: Fix the definition of the fixmap area Christophe Leroy 2021-04-20 13:32 ` Christophe Leroy 2021-04-20 13:32 ` Christophe Leroy [this message] 2021-04-20 13:32 ` [PATCH v2 2/2] powerpc/legacy_serial: Use early_ioremap() Christophe Leroy 2021-04-20 13:39 ` Christophe Leroy 2021-04-20 21:15 ` Chris Packham 2021-04-20 21:15 ` Chris Packham 2021-05-19 14:57 ` Alexey Kardashevskiy 2021-05-19 14:57 ` Alexey Kardashevskiy 2021-04-29 14:01 ` [PATCH v2 1/2] powerpc/64: Fix the definition of the fixmap area Michael Ellerman 2021-04-29 14:01 ` Michael Ellerman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=103ed8ee9e5973c958ec1da2d0b0764f69395d01.1618925560.git.christophe.leroy@csgroup.eu \ --to=christophe.leroy@csgroup.eu \ --cc=benh@kernel.crashing.org \ --cc=chris.packham@alliedtelesis.co.nz \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=mpe@ellerman.id.au \ --cc=paulus@samba.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.