From: yakui_zhao <yakui.zhao@intel.com>
To: Bob Copeland <me@bobcopeland.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>
Subject: Re: acpi/suspend - irq 9: nobody cared
Date: Fri, 08 May 2009 09:53:54 +0800 [thread overview]
Message-ID: <1241747634.3773.129.camel@localhost.localdomain> (raw)
In-Reply-To: <20090507105821.GA5864@hash.localnet>
On Thu, 2009-05-07 at 18:58 +0800, Bob Copeland wrote:
> Hi,
>
> I have been seeing the following in 2.6.30 whenever I suspend to ram.
> The power button no longer works afterwards. I don't recall any
> problems with 2.6.29. Anyone have any ideas before I try bisecting?
>From the description it seems that this is a regression.
Will you please use git-bisect to identify the commit which causes the
regression?
Thanks.
>
> (The previous W taint is something unrelated.)
>
> [31263.940249] appletouch: Geyser mode initialized.
> [31263.941375] usb 4-2: type resume
> [31264.043112] usb 4-2: reset full speed USB device using uhci_hcd and address 2
> [31264.183582] usb 5-1: type resume
> [31264.283313] irq 9: nobody cared (try booting with the "irqpoll" option)
> [31264.283318] Pid: 0, comm: swapper Tainted: G W 2.6.30-rc4-wl #116
> [31264.283320] Call Trace:
> [31264.283328] [<c015a01a>] __report_bad_irq+0x33/0x74
> [31264.283333] [<c015a150>] note_interrupt+0xf5/0x14d
> [31264.283337] [<c015a6bf>] handle_fasteoi_irq+0x8c/0xb0
> [31264.283342] [<c0104601>] handle_irq+0x40/0x4b
> [31264.283348] [<c035a322>] do_IRQ+0x4a/0x8c
> [31264.283352] [<c010312e>] common_interrupt+0x2e/0x34
> [31264.283358] [<c01455a3>] ? trace_hardirqs_on+0xb/0xd
> [31264.283362] [<c014007b>] ? timer_list_show+0x1b3/0x939
> [31264.283375] [<f891c00f>] ? acpi_idle_enter_c1+0xad/0xb9 [processor]
> [31264.283380] [<c02d20ee>] cpuidle_idle_call+0x6a/0x9c
> [31264.283384] [<c0101cc8>] cpu_idle+0x53/0x87
> [31264.283388] [<c03467e0>] rest_init+0x6c/0x6e
> [31264.283394] [<c04df74d>] start_kernel+0x286/0x28b
> [31264.283398] [<c04df037>] __init_begin+0x37/0x3c
> [31264.283400] handlers:
> [31264.283402] [<c022cabc>] (acpi_irq+0x0/0x2e)
> [31264.283408] Disabling IRQ #9
> [31264.285035] usb 5-1: reset full speed USB device using uhci_hcd and address 2
> [31264.383127] ------------[ cut here ]------------
> [31264.383132] WARNING: at kernel/irq/handle.c:366 handle_IRQ_event+0x40/0x179()
> [31264.383137] Hardware name: MacBook1,1
> [31264.383140] BUG: IRQ handler called from non-hardirq context!Modules linked in: fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod arc4 ecb ath5k snd_hda_codec_idt snd_hda_intel hid_apple appletouch snd_hda_codec mac80211 usbhid snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq ath snd_seq_device sky2 ohci1394 snd_pcm_oss snd_mixer_oss cfg80211 ieee1394 processor button snd_pcm snd_timer uhci_hcd ehci_hcd bitrev snd ac battery thermal snd_page_alloc crc32 sg joydev sr_mod applesmc input_polldev evdev cdrom unix [last unloaded: microcode]
> [31264.383241] Pid: 0, comm: swapper Tainted: G W 2.6.30-rc4-wl #116
> [31264.383245] Call Trace:
> [31264.383254] [<c012590f>] warn_slowpath+0x76/0xa5
> [31264.383264] [<c01473e5>] ? print_lock_contention_bug+0x14/0xd7
> [31264.383272] [<c013bb30>] ? sched_clock_cpu+0x92/0x2f1
> [31264.383281] [<c01455a3>] ? trace_hardirqs_on+0xb/0xd
> [31264.383290] [<c035659a>] ? _spin_unlock_irqrestore+0x3b/0x5d
> [31264.383298] [<c0145473>] ? trace_hardirqs_on_caller+0x18/0x13d
> [31264.383307] [<c03565a6>] ? _spin_unlock_irqrestore+0x47/0x5d
> [31264.383315] [<c0159f0d>] ? try_one_irq+0x92/0xf7
> [31264.383323] [<c0158f31>] handle_IRQ_event+0x40/0x179
> [31264.383331] [<c0159f25>] try_one_irq+0xaa/0xf7
> [31264.383340] [<c0159fa1>] poll_all_shared_irqs+0x2f/0x44
> [31264.383348] [<c0159fc3>] poll_spurious_irqs+0xd/0x22
> [31264.383356] [<c012d860>] run_timer_softirq+0x196/0x20f
> [31264.383363] [<c012d7e1>] ? run_timer_softirq+0x117/0x20f
> [31264.383372] [<c0159fb6>] ? poll_spurious_irqs+0x0/0x22
> [31264.383381] [<c0129f91>] __do_softirq+0xb1/0x182
> [31264.383390] [<c012a092>] do_softirq+0x30/0x48
> [31264.383397] [<c012a20a>] irq_exit+0x3d/0x74
> [31264.383405] [<c035a34e>] do_IRQ+0x76/0x8c
> [31264.383413] [<c010312e>] common_interrupt+0x2e/0x34
> [31264.383422] [<c014007b>] ? timer_list_show+0x1b3/0x939
> [31264.383440] [<f891c281>] ? acpi_idle_enter_bm+0x266/0x291 [processor]
> [31264.383450] [<c02d20ee>] cpuidle_idle_call+0x6a/0x9c
> [31264.383458] [<c0101cc8>] cpu_idle+0x53/0x87
> [31264.383465] [<c03467e0>] rest_init+0x6c/0x6e
> [31264.383482] [<c04df74d>] start_kernel+0x286/0x28b
> [31264.383487] [<c04df037>] __init_begin+0x37/0x3c
> [31264.383489] ---[ end trace 576a96bb93c6d61f ]---
> [31264.460510] ieee80211 phy0: legacy class resume
> [31264.460589] drm card0: legacy class resume
> [31264.460634] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
> [31264.460661] pci 0000:00:02.0: setting latency timer to 64
>
> bob@sludge wireless-testing]$ cat /proc/interrupts
> CPU0 CPU1
> 0: 1967552 0 IO-APIC-edge timer
> 8: 84 0 IO-APIC-edge rtc0
> 9: 138333 261669 IO-APIC-fasteoi acpi
> 14: 329504 0 IO-APIC-edge ata_piix
> 15: 0 0 IO-APIC-edge ata_piix
> 16: 1918 84773 IO-APIC-fasteoi uhci_hcd:usb5, eth0, i915@pci:0000:00:02.0
> 17: 127320 0 IO-APIC-fasteoi ath
> 18: 69 0 IO-APIC-fasteoi uhci_hcd:usb4
> 19: 4230 117896 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3, ohci1394
> 21: 744 79985 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
> 22: 268 0 IO-APIC-fasteoi HDA Intel
> NMI: 0 0 Non-maskable interrupts
> LOC: 357130 1384924 Local timer interrupts
> SPU: 0 0 Spurious interrupts
> RES: 243366 162707 Rescheduling interrupts
> CAL: 193 367 Function call interrupts
> TLB: 2533 2519 TLB shootdowns
> TRM: 0 0 Thermal event interrupts
> ERR: 0
> MIS: 0
>
next prev parent reply other threads:[~2009-05-08 1:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-07 10:58 acpi/suspend - irq 9: nobody cared Bob Copeland
2009-05-08 1:53 ` yakui_zhao [this message]
2009-05-12 19:01 ` Bjorn Helgaas
2009-05-12 19:26 ` Bob Copeland
2009-05-12 19:26 ` Bob Copeland
2009-05-13 4:05 ` [BISECTED] Was " Bob Copeland
[not found] ` <d3f22a0905122245h15786220g31ad0dcb8caa3a38@mail.gmail.com>
2009-05-13 5:36 ` Lin Ming
2009-05-13 8:15 ` Rafael J. Wysocki
2009-05-13 15:30 ` Bob Copeland
2009-05-13 15:30 ` Bob Copeland
2009-05-16 2:34 ` [PATCH] ACPI: resume: re-enable SCI-enable workaround Len Brown
2009-05-16 3:30 ` Moore, Robert
2009-05-16 5:49 ` Len Brown
2009-05-16 6:50 ` Moore, Robert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1241747634.3773.129.camel@localhost.localdomain \
--to=yakui.zhao@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=me@bobcopeland.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.