From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-omap@vger.kernel.org
Cc: sakari.ailus@maxwell.research.nokia.com
Subject: [RFC/PATCH v3 5/7] ARM: OMAP3: Update Camera ISP definitions for OMAP3630
Date: Thu, 25 Nov 2010 03:54:36 +0100 [thread overview]
Message-ID: <1290653678-15556-6-git-send-email-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <1290653678-15556-1-git-send-email-laurent.pinchart@ideasonboard.com>
From: Tuukka Toivonen <tuukka.o.toivonen@nokia.com>
Add new/changed base address definitions and resources for
OMAP3630 ISP.
The OMAP3430 CSI2PHY block is same as the OMAP3630 CSIPHY2
block. But the later name is chosen as it gives more symmetry
to the names.
Signed-off-by: Tuukka Toivonen <tuukka.o.toivonen@nokia.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@nokia.com>
---
arch/arm/mach-omap2/devices.c | 28 ++++++++++++++++++++++++----
arch/arm/plat-omap/include/plat/omap34xx.h | 16 ++++++++++++----
2 files changed, 36 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5a0c148..d5da345 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -109,13 +109,33 @@ static struct resource omap3isp_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = OMAP3430_ISP_CSI2A_BASE,
- .end = OMAP3430_ISP_CSI2A_END,
+ .start = OMAP3430_ISP_CSI2A_REGS1_BASE,
+ .end = OMAP3430_ISP_CSI2A_REGS1_END,
.flags = IORESOURCE_MEM,
},
{
- .start = OMAP3430_ISP_CSI2PHY_BASE,
- .end = OMAP3430_ISP_CSI2PHY_END,
+ .start = OMAP3430_ISP_CSIPHY2_BASE,
+ .end = OMAP3430_ISP_CSIPHY2_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3630_ISP_CSI2A_REGS2_BASE,
+ .end = OMAP3630_ISP_CSI2A_REGS2_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3630_ISP_CSI2C_REGS1_BASE,
+ .end = OMAP3630_ISP_CSI2C_REGS1_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3630_ISP_CSIPHY1_BASE,
+ .end = OMAP3630_ISP_CSIPHY1_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3630_ISP_CSI2C_REGS2_BASE,
+ .end = OMAP3630_ISP_CSI2C_REGS2_END,
.flags = IORESOURCE_MEM,
},
{
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index 98fc8b4..b9e8588 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -56,8 +56,12 @@
#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000)
#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200)
#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400)
-#define OMAP3430_ISP_CSI2A_BASE (OMAP3430_ISP_BASE + 0x1800)
-#define OMAP3430_ISP_CSI2PHY_BASE (OMAP3430_ISP_BASE + 0x1970)
+#define OMAP3430_ISP_CSI2A_REGS1_BASE (OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSIPHY2_BASE (OMAP3430_ISP_BASE + 0x1970)
+#define OMAP3630_ISP_CSI2A_REGS2_BASE (OMAP3430_ISP_BASE + 0x19C0)
+#define OMAP3630_ISP_CSI2C_REGS1_BASE (OMAP3430_ISP_BASE + 0x1C00)
+#define OMAP3630_ISP_CSIPHY1_BASE (OMAP3430_ISP_BASE + 0x1D70)
+#define OMAP3630_ISP_CSI2C_REGS2_BASE (OMAP3430_ISP_BASE + 0x1DC0)
#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F)
#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077)
@@ -69,8 +73,12 @@
#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB)
#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB)
#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F)
-#define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F)
-#define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007)
+#define OMAP3430_ISP_CSI2A_REGS1_END (OMAP3430_ISP_CSI2A_REGS1_BASE + 0x16F)
+#define OMAP3430_ISP_CSIPHY2_END (OMAP3430_ISP_CSIPHY2_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2A_REGS2_END (OMAP3630_ISP_CSI2A_REGS2_BASE + 0x3F)
+#define OMAP3630_ISP_CSI2C_REGS1_END (OMAP3630_ISP_CSI2C_REGS1_BASE + 0x16F)
+#define OMAP3630_ISP_CSIPHY1_END (OMAP3630_ISP_CSIPHY1_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2C_REGS2_END (OMAP3630_ISP_CSI2C_REGS2_BASE + 0x3F)
#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
--
1.7.2.2
next prev parent reply other threads:[~2010-11-25 2:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-25 2:54 [RFC/PATCH v3 0/7] OMAP3 ISP driver Laurent Pinchart
2010-11-25 2:54 ` [RFC/PATCH v3 1/7] v4l: subdev: Generic ioctl support Laurent Pinchart
2010-11-25 2:54 ` [RFC/PATCH v3 2/7] v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functions Laurent Pinchart
2010-11-25 2:54 ` [RFC/PATCH v3 3/7] v4l: Add subdev sensor g_skip_frames operation Laurent Pinchart
2010-11-25 2:54 ` [RFC/PATCH v3 4/7] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h Laurent Pinchart
2010-11-25 2:54 ` Laurent Pinchart [this message]
2010-12-06 19:30 ` [RFC/PATCH v3 5/7] ARM: OMAP3: Update Camera ISP definitions for OMAP3630 Tony Lindgren
2010-11-25 2:54 ` [RFC/PATCH v3 6/7] omap3: Export omap3isp platform device structure Laurent Pinchart
2010-11-25 7:02 ` Felipe Balbi
2010-11-25 11:17 ` Laurent Pinchart
2010-11-25 11:23 ` Felipe Balbi
2010-12-06 19:32 ` Tony Lindgren
2010-12-10 1:12 ` Laurent Pinchart
2010-11-25 7:03 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290653678-15556-6-git-send-email-laurent.pinchart@ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-omap@vger.kernel.org \
--cc=sakari.ailus@maxwell.research.nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.