From: Kukjin Kim <kgene.kim@samsung.com> To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: ben-linux@fluff.org, Kukjin Kim <kgene.kim@samsung.com>, Grant Likely <grant.likely@secretlab.ca> Subject: [PATCH 1/7 (RE-SEND)] gpio/s3c24xx: move gpio driver into drivers/gpio/ Date: Tue, 30 Aug 2011 21:27:23 +0900 [thread overview] Message-ID: <1314707249-12241-2-git-send-email-kgene.kim@samsung.com> (raw) In-Reply-To: <1314707249-12241-1-git-send-email-kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s3c2410/Kconfig | 6 -- arch/arm/mach-s3c2410/Makefile | 1 - arch/arm/mach-s3c2412/Kconfig | 1 - arch/arm/mach-s3c2412/Makefile | 1 - arch/arm/mach-s3c2440/Kconfig | 2 - arch/arm/plat-s3c24xx/Makefile | 2 - arch/arm/plat-s3c24xx/gpio.c | 96 -------------------- drivers/gpio/Kconfig | 4 + drivers/gpio/Makefile | 1 + .../gpiolib.c => drivers/gpio/gpio-s3c24xx.c | 70 +++++++++++++-- 10 files changed, 67 insertions(+), 117 deletions(-) delete mode 100644 arch/arm/plat-s3c24xx/gpio.c rename arch/arm/plat-s3c24xx/gpiolib.c => drivers/gpio/gpio-s3c24xx.c (78%) diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 7245a55..3700cf3 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -8,7 +8,6 @@ config CPU_S3C2410 select CPU_ARM920T select S3C_GPIO_PULL_UP select S3C2410_CLOCK - select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX @@ -28,11 +27,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -config S3C2410_GPIO - bool - help - GPIO code for S3C2410 and similar processors - config SIMTEC_NOR bool help diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 8169535..782fd81 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o -obj-$(CONFIG_S3C2410_GPIO) += gpio.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index c2cf4e5..b8b9029 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -9,7 +9,6 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA - select S3C2410_GPIO help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 6c48a91..7e4d95f 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -12,7 +12,6 @@ obj- := obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o -obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o obj-$(CONFIG_S3C2412_PM) += pm.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 50825a3..c461fb8 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -8,7 +8,6 @@ config CPU_S3C2440 select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM - select S3C2410_GPIO select S3C2440_DMA if S3C2410_DMA select CPU_S3C244X select CPU_LLSERIAL_S3C2440 @@ -20,7 +19,6 @@ config CPU_S3C2442 select CPU_ARM920T select S3C_GPIO_PULL_DOWN select S3C2410_CLOCK - select S3C2410_GPIO select S3C2410_PM if PM select CPU_S3C244X select CPU_LLSERIAL_S3C2440 diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 0291bd6..e4f4649 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -15,8 +15,6 @@ obj- := obj-y += cpu.o obj-y += irq.o obj-y += devs.o -obj-y += gpio.o -obj-y += gpiolib.o obj-y += clock.o obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c deleted file mode 100644 index 2f3d7c0..0000000 --- a/arch/arm/plat-s3c24xx/gpio.c +++ /dev/null @@ -1,96 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/gpio.c - * - * Copyright (c) 2004-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/gpio-fns.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> - -/* gpiolib wrappers until these are totally eliminated */ - -void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) -{ - int ret; - - WARN_ON(to); /* should be none of these left */ - - if (!to) { - /* if pull is enabled, try first with up, and if that - * fails, try using down */ - - ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); - if (ret) - s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); - } else { - s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); - } -} -EXPORT_SYMBOL(s3c2410_gpio_pullup); - -void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) -{ - /* do this via gpiolib until all users removed */ - - gpio_request(pin, "temporary"); - gpio_set_value(pin, to); - gpio_free(pin); -} - -EXPORT_SYMBOL(s3c2410_gpio_setpin); - -unsigned int s3c2410_gpio_getpin(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long offs = pin - chip->chip.base; - - return __raw_readl(chip->base + 0x04) & (1<< offs); -} - -EXPORT_SYMBOL(s3c2410_gpio_getpin); - -unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) -{ - unsigned long flags; - unsigned long misccr; - - local_irq_save(flags); - misccr = __raw_readl(S3C24XX_MISCCR); - misccr &= ~clear; - misccr ^= change; - __raw_writel(misccr, S3C24XX_MISCCR); - local_irq_restore(flags); - - return misccr; -} - -EXPORT_SYMBOL(s3c2410_modify_misccr); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d539efd..5654e1b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -135,6 +135,10 @@ config GPIO_PLAT_SAMSUNG def_bool y depends on SAMSUNG_GPIOLIB_4BIT +config GPIO_S3C24XX + def_bool y + depends on PLAT_S3C24XX + config GPIO_S5PC100 def_bool y depends on CPU_S5PC100 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9588948..c7f1c00 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o +obj-$(CONFIG_GPIO_S3C24XX) += gpio-s3c24xx.o obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/drivers/gpio/gpio-s3c24xx.c similarity index 78% rename from arch/arm/plat-s3c24xx/gpiolib.c rename to drivers/gpio/gpio-s3c24xx.c index 243b641..ff61031 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/drivers/gpio/gpio-s3c24xx.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/gpiolib.c - * +/* * Copyright (c) 2008-2010 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -19,16 +18,17 @@ #include <linux/ioport.h> #include <linux/io.h> #include <linux/gpio.h> +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/gpio-fns.h> +#include <mach/regs-gpio.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <mach/hardware.h> -#include <asm/irq.h> #include <plat/pm.h> -#include <mach/regs-gpio.h> - static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) { return -EINVAL; @@ -210,7 +210,6 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }; - static __init int s3c24xx_gpiolib_init(void) { struct s3c_gpio_chip *chip = s3c24xx_gpios; @@ -225,5 +224,60 @@ static __init int s3c24xx_gpiolib_init(void) return 0; } - core_initcall(s3c24xx_gpiolib_init); + +/* gpiolib wrappers until these are totally eliminated */ + +void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) +{ + int ret; + + WARN_ON(to); /* should be none of these left */ + + if (!to) { + /* if pull is enabled, try first with up, and if that + * fails, try using down */ + + ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); + if (ret) + s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); + } else { + s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); + } +} +EXPORT_SYMBOL(s3c2410_gpio_pullup); + +void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) +{ + /* do this via gpiolib until all users removed */ + + gpio_request(pin, "temporary"); + gpio_set_value(pin, to); + gpio_free(pin); +} +EXPORT_SYMBOL(s3c2410_gpio_setpin); + +unsigned int s3c2410_gpio_getpin(unsigned int pin) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; + + return __raw_readl(chip->base + 0x04) & (1<< offs); +} +EXPORT_SYMBOL(s3c2410_gpio_getpin); + +unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) +{ + unsigned long flags; + unsigned long misccr; + + local_irq_save(flags); + misccr = __raw_readl(S3C24XX_MISCCR); + misccr &= ~clear; + misccr ^= change; + __raw_writel(misccr, S3C24XX_MISCCR); + local_irq_restore(flags); + + return misccr; +} +EXPORT_SYMBOL(s3c2410_modify_misccr); -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: kgene.kim@samsung.com (Kukjin Kim) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/7 (RE-SEND)] gpio/s3c24xx: move gpio driver into drivers/gpio/ Date: Tue, 30 Aug 2011 21:27:23 +0900 [thread overview] Message-ID: <1314707249-12241-2-git-send-email-kgene.kim@samsung.com> (raw) In-Reply-To: <1314707249-12241-1-git-send-email-kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s3c2410/Kconfig | 6 -- arch/arm/mach-s3c2410/Makefile | 1 - arch/arm/mach-s3c2412/Kconfig | 1 - arch/arm/mach-s3c2412/Makefile | 1 - arch/arm/mach-s3c2440/Kconfig | 2 - arch/arm/plat-s3c24xx/Makefile | 2 - arch/arm/plat-s3c24xx/gpio.c | 96 -------------------- drivers/gpio/Kconfig | 4 + drivers/gpio/Makefile | 1 + .../gpiolib.c => drivers/gpio/gpio-s3c24xx.c | 70 +++++++++++++-- 10 files changed, 67 insertions(+), 117 deletions(-) delete mode 100644 arch/arm/plat-s3c24xx/gpio.c rename arch/arm/plat-s3c24xx/gpiolib.c => drivers/gpio/gpio-s3c24xx.c (78%) diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 7245a55..3700cf3 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -8,7 +8,6 @@ config CPU_S3C2410 select CPU_ARM920T select S3C_GPIO_PULL_UP select S3C2410_CLOCK - select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX @@ -28,11 +27,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -config S3C2410_GPIO - bool - help - GPIO code for S3C2410 and similar processors - config SIMTEC_NOR bool help diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 8169535..782fd81 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o -obj-$(CONFIG_S3C2410_GPIO) += gpio.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index c2cf4e5..b8b9029 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -9,7 +9,6 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA - select S3C2410_GPIO help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 6c48a91..7e4d95f 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -12,7 +12,6 @@ obj- := obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o -obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o obj-$(CONFIG_S3C2412_PM) += pm.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 50825a3..c461fb8 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -8,7 +8,6 @@ config CPU_S3C2440 select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM - select S3C2410_GPIO select S3C2440_DMA if S3C2410_DMA select CPU_S3C244X select CPU_LLSERIAL_S3C2440 @@ -20,7 +19,6 @@ config CPU_S3C2442 select CPU_ARM920T select S3C_GPIO_PULL_DOWN select S3C2410_CLOCK - select S3C2410_GPIO select S3C2410_PM if PM select CPU_S3C244X select CPU_LLSERIAL_S3C2440 diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 0291bd6..e4f4649 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -15,8 +15,6 @@ obj- := obj-y += cpu.o obj-y += irq.o obj-y += devs.o -obj-y += gpio.o -obj-y += gpiolib.o obj-y += clock.o obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c deleted file mode 100644 index 2f3d7c0..0000000 --- a/arch/arm/plat-s3c24xx/gpio.c +++ /dev/null @@ -1,96 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/gpio.c - * - * Copyright (c) 2004-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/gpio-fns.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> - -/* gpiolib wrappers until these are totally eliminated */ - -void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) -{ - int ret; - - WARN_ON(to); /* should be none of these left */ - - if (!to) { - /* if pull is enabled, try first with up, and if that - * fails, try using down */ - - ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); - if (ret) - s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); - } else { - s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); - } -} -EXPORT_SYMBOL(s3c2410_gpio_pullup); - -void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) -{ - /* do this via gpiolib until all users removed */ - - gpio_request(pin, "temporary"); - gpio_set_value(pin, to); - gpio_free(pin); -} - -EXPORT_SYMBOL(s3c2410_gpio_setpin); - -unsigned int s3c2410_gpio_getpin(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long offs = pin - chip->chip.base; - - return __raw_readl(chip->base + 0x04) & (1<< offs); -} - -EXPORT_SYMBOL(s3c2410_gpio_getpin); - -unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) -{ - unsigned long flags; - unsigned long misccr; - - local_irq_save(flags); - misccr = __raw_readl(S3C24XX_MISCCR); - misccr &= ~clear; - misccr ^= change; - __raw_writel(misccr, S3C24XX_MISCCR); - local_irq_restore(flags); - - return misccr; -} - -EXPORT_SYMBOL(s3c2410_modify_misccr); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d539efd..5654e1b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -135,6 +135,10 @@ config GPIO_PLAT_SAMSUNG def_bool y depends on SAMSUNG_GPIOLIB_4BIT +config GPIO_S3C24XX + def_bool y + depends on PLAT_S3C24XX + config GPIO_S5PC100 def_bool y depends on CPU_S5PC100 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9588948..c7f1c00 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o +obj-$(CONFIG_GPIO_S3C24XX) += gpio-s3c24xx.o obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/drivers/gpio/gpio-s3c24xx.c similarity index 78% rename from arch/arm/plat-s3c24xx/gpiolib.c rename to drivers/gpio/gpio-s3c24xx.c index 243b641..ff61031 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/drivers/gpio/gpio-s3c24xx.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/gpiolib.c - * +/* * Copyright (c) 2008-2010 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -19,16 +18,17 @@ #include <linux/ioport.h> #include <linux/io.h> #include <linux/gpio.h> +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/gpio-fns.h> +#include <mach/regs-gpio.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <mach/hardware.h> -#include <asm/irq.h> #include <plat/pm.h> -#include <mach/regs-gpio.h> - static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) { return -EINVAL; @@ -210,7 +210,6 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }; - static __init int s3c24xx_gpiolib_init(void) { struct s3c_gpio_chip *chip = s3c24xx_gpios; @@ -225,5 +224,60 @@ static __init int s3c24xx_gpiolib_init(void) return 0; } - core_initcall(s3c24xx_gpiolib_init); + +/* gpiolib wrappers until these are totally eliminated */ + +void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) +{ + int ret; + + WARN_ON(to); /* should be none of these left */ + + if (!to) { + /* if pull is enabled, try first with up, and if that + * fails, try using down */ + + ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); + if (ret) + s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); + } else { + s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); + } +} +EXPORT_SYMBOL(s3c2410_gpio_pullup); + +void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) +{ + /* do this via gpiolib until all users removed */ + + gpio_request(pin, "temporary"); + gpio_set_value(pin, to); + gpio_free(pin); +} +EXPORT_SYMBOL(s3c2410_gpio_setpin); + +unsigned int s3c2410_gpio_getpin(unsigned int pin) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; + + return __raw_readl(chip->base + 0x04) & (1<< offs); +} +EXPORT_SYMBOL(s3c2410_gpio_getpin); + +unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) +{ + unsigned long flags; + unsigned long misccr; + + local_irq_save(flags); + misccr = __raw_readl(S3C24XX_MISCCR); + misccr &= ~clear; + misccr ^= change; + __raw_writel(misccr, S3C24XX_MISCCR); + local_irq_restore(flags); + + return misccr; +} +EXPORT_SYMBOL(s3c2410_modify_misccr); -- 1.7.1
next prev parent reply other threads:[~2011-08-30 12:44 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-08-30 12:27 [PATCH 0/7] gpio/samsung: Add support Samsung GPIO with gpio-samsung.c Kukjin Kim 2011-08-30 12:27 ` Kukjin Kim 2011-08-30 12:27 ` Kukjin Kim [this message] 2011-08-30 12:27 ` [PATCH 1/7 (RE-SEND)] gpio/s3c24xx: move gpio driver into drivers/gpio/ Kukjin Kim 2011-09-19 11:13 ` Kukjin Kim 2011-09-19 11:13 ` Kukjin Kim 2011-09-20 23:52 ` Grant Likely 2011-09-20 23:52 ` Grant Likely 2011-09-20 23:58 ` Kukjin Kim 2011-09-20 23:58 ` Kukjin Kim 2011-08-30 12:27 ` [PATCH 2/7 (RE-SEND)] gpio/s3c64xx: " Kukjin Kim 2011-08-30 12:27 ` Kukjin Kim 2011-08-30 12:27 ` [PATCH 3/7 (RE-SEND)] gpio/s5p64x0: " Kukjin Kim 2011-08-30 12:27 ` Kukjin Kim 2011-08-30 12:27 ` [PATCH 4/7] gpio/samsung: Remove useless old Samsung related GPIO drivers Kukjin Kim 2011-08-30 12:27 ` Kukjin Kim 2011-09-20 23:45 ` Grant Likely 2011-09-20 23:45 ` Grant Likely 2011-09-20 23:53 ` Kukjin Kim 2011-09-20 23:53 ` Kukjin Kim 2011-08-30 12:27 ` [PATCH 5/7] gpio/samsung: Added gpio-samsung.c to support Samsung GPIOs Kukjin Kim 2011-08-30 12:27 ` Kukjin Kim 2011-09-20 23:49 ` Grant Likely 2011-09-20 23:49 ` Grant Likely 2011-09-20 23:56 ` Kukjin Kim 2011-09-20 23:56 ` Kukjin Kim 2011-08-30 12:27 ` [PATCH 6/7] ARM: SAMSUNG: Update the name of regarding Samsung GPIO Kukjin Kim 2011-08-30 12:27 ` Kukjin Kim 2011-08-30 12:27 ` [PATCH 7/7] ARM: SAMSUNG: Remove useless Samsung GPIO related CONFIGs Kukjin Kim 2011-08-30 12:27 ` Kukjin Kim
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1314707249-12241-2-git-send-email-kgene.kim@samsung.com \ --to=kgene.kim@samsung.com \ --cc=ben-linux@fluff.org \ --cc=grant.likely@secretlab.ca \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-samsung-soc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.