From: "Eric Bénard" <eric@eukrea.com>
To: linux-kernel@vger.kernel.org
Cc: nicolas.ferre@atmel.com, linux-arm-kernel@lists.infradead.org,
linux-crypto@vger.kernel.org, herbert@gondor.apana.org.au,
davem@davemloft.net, plagnioj@jcrosoft.com, nicolas@eukrea.com,
eric@eukrea.com
Subject: [PATCH 1/5] ARM: AT91SAM9G45: add crypto peripherals
Date: Sun, 1 Jul 2012 19:19:43 +0200 [thread overview]
Message-ID: <1341163187-14946-2-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1341163187-14946-1-git-send-email-eric@eukrea.com>
From: Nicolas Royer <nicolas@eukrea.com>
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
---
arch/arm/mach-at91/at91sam9g45.c | 13 +++-
arch/arm/mach-at91/at91sam9g45_devices.c | 128 +++++++++++++++++++++++++
arch/arm/mach-at91/include/mach/at91sam9g45.h | 2 +
include/linux/platform_data/atmel-aes.h | 22 ++++
4 files changed, 164 insertions(+), 1 deletions(-)
create mode 100644 include/linux/platform_data/atmel-aes.h
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 4792682..da6dc0f 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -182,6 +182,13 @@ static struct clk adc_op_clk = {
.rate_hz = 13200000,
};
+/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
+static struct clk aestdessha_clk = {
+ .name = "aestdessha_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
@@ -211,6 +218,7 @@ static struct clk *periph_clocks[] __initdata = {
&udphs_clk,
&mmc1_clk,
&adc_op_clk,
+ &aestdessha_clk,
// irq0
};
@@ -231,6 +239,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
@@ -387,7 +398,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
3, /* Ethernet */
0, /* Image Sensor Interface */
2, /* USB Device High speed port */
- 0,
+ 0, /* AESTDESSHA Crypto HW Accelerators */
0, /* Multimedia Card Interface 1 */
0,
0, /* Advanced Interrupt Controller (IRQ0) */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 933fc9a..7102f62 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
+#include <linux/platform_data/atmel-aes.h>
#include <linux/platform_data/at91_adc.h>
@@ -1830,6 +1831,130 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_add_device_serial(void) {}
#endif
+/* --------------------------------------------------------------------
+ * SHA1/SHA256
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE)
+static struct resource sha_resources[] = {
+ {
+ .start = AT91SAM9G45_BASE_SHA,
+ .end = AT91SAM9G45_BASE_SHA + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AESTDESSHA,
+ .end = AT91SAM9G45_ID_AESTDESSHA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_sha_device = {
+ .name = "atmel_sha",
+ .id = -1,
+ .resource = sha_resources,
+ .num_resources = ARRAY_SIZE(sha_resources),
+};
+
+static void __init at91_add_device_sha(void)
+{
+ platform_device_register(&at91sam9g45_sha_device);
+}
+#else
+static void __init at91_add_device_sha(void) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * DES/TDES
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE)
+static struct resource tdes_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TDES,
+ .end = AT91SAM9G45_BASE_TDES + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AESTDESSHA,
+ .end = AT91SAM9G45_ID_AESTDESSHA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_tdes_device = {
+ .name = "atmel_tdes",
+ .id = -1,
+ .resource = tdes_resources,
+ .num_resources = ARRAY_SIZE(tdes_resources),
+};
+
+static void __init at91_add_device_tdes(void)
+{
+ platform_device_register(&at91sam9g45_tdes_device);
+}
+#else
+static void __init at91_add_device_tdes(void) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * AES
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE)
+static struct aes_platform_data aes_data;
+static u64 aes_dmamask = DMA_BIT_MASK(32);
+
+static struct resource aes_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_AES,
+ .end = AT91SAM9G45_BASE_AES + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AESTDESSHA,
+ .end = AT91SAM9G45_ID_AESTDESSHA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_aes_device = {
+ .name = "atmel_aes",
+ .id = -1,
+ .dev = {
+ .dma_mask = &aes_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &aes_data,
+ },
+ .resource = aes_resources,
+ .num_resources = ARRAY_SIZE(aes_resources),
+};
+
+static void __init at91_add_device_aes(void)
+{
+ struct at_dma_slave *atslave;
+ struct aes_dma_data *alt_atslave;
+
+ alt_atslave = kzalloc(sizeof(struct aes_dma_data), GFP_KERNEL);
+
+ /* DMA TX slave channel configuration */
+ atslave = &alt_atslave->txdata;
+ atslave->dma_dev = &at_hdmac_device.dev;
+ atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW |
+ ATC_SRC_PER(AT_DMA_ID_AES_RX);
+
+ /* DMA RX slave channel configuration */
+ atslave = &alt_atslave->rxdata;
+ atslave->dma_dev = &at_hdmac_device.dev;
+ atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW |
+ ATC_DST_PER(AT_DMA_ID_AES_TX);
+
+ aes_data.dma_slave = alt_atslave;
+ platform_device_register(&at91sam9g45_aes_device);
+}
+#else
+static void __init at91_add_device_aes(void) {}
+#endif
/* -------------------------------------------------------------------- */
/*
@@ -1847,6 +1972,9 @@ static int __init at91_add_standard_devices(void)
at91_add_device_trng();
at91_add_device_watchdog();
at91_add_device_tc();
+ at91_add_device_sha();
+ at91_add_device_tdes();
+ at91_add_device_aes();
return 0;
}
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 3a4da24..8eba102 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -136,6 +136,8 @@
#define AT_DMA_ID_SSC1_RX 8
#define AT_DMA_ID_AC97_TX 9
#define AT_DMA_ID_AC97_RX 10
+#define AT_DMA_ID_AES_TX 11
+#define AT_DMA_ID_AES_RX 12
#define AT_DMA_ID_MCI1 13
#endif
diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h
new file mode 100644
index 0000000..e7a1949
--- /dev/null
+++ b/include/linux/platform_data/atmel-aes.h
@@ -0,0 +1,22 @@
+#ifndef __LINUX_ATMEL_AES_H
+#define __LINUX_ATMEL_AES_H
+
+#include <mach/at_hdmac.h>
+
+/**
+ * struct aes_dma_data - DMA data for AES
+ */
+struct aes_dma_data {
+ struct at_dma_slave txdata;
+ struct at_dma_slave rxdata;
+};
+
+/**
+ * struct aes_platform_data - board-specific AES configuration
+ * @dma_slave: DMA slave interface to use in data transfers.
+ */
+struct aes_platform_data {
+ struct aes_dma_data *dma_slave;
+};
+
+#endif /* __LINUX_ATMEL_AES_H */
--
1.7.7.6
WARNING: multiple messages have this Message-ID (diff)
From: "Eric Bénard" <eric@eukrea.com>
To: linux-kernel@vger.kernel.org
Cc: nicolas.ferre@atmel.com, linux-arm-kernel@lists.infradead.org,
linux-crypto@vger.kernel.org, herbert@gondor.hengli.com.au,
davem@davemloft.net, plagnioj@jcrosoft.com, nicolas@eukrea.com,
eric@eukrea.com
Subject: [PATCH 1/5] ARM: AT91SAM9G45: add crypto peripherals
Date: Sun, 1 Jul 2012 19:19:43 +0200 [thread overview]
Message-ID: <1341163187-14946-2-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1341163187-14946-1-git-send-email-eric@eukrea.com>
From: Nicolas Royer <nicolas@eukrea.com>
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
---
arch/arm/mach-at91/at91sam9g45.c | 13 +++-
arch/arm/mach-at91/at91sam9g45_devices.c | 128 +++++++++++++++++++++++++
arch/arm/mach-at91/include/mach/at91sam9g45.h | 2 +
include/linux/platform_data/atmel-aes.h | 22 ++++
4 files changed, 164 insertions(+), 1 deletions(-)
create mode 100644 include/linux/platform_data/atmel-aes.h
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 4792682..da6dc0f 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -182,6 +182,13 @@ static struct clk adc_op_clk = {
.rate_hz = 13200000,
};
+/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
+static struct clk aestdessha_clk = {
+ .name = "aestdessha_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
@@ -211,6 +218,7 @@ static struct clk *periph_clocks[] __initdata = {
&udphs_clk,
&mmc1_clk,
&adc_op_clk,
+ &aestdessha_clk,
// irq0
};
@@ -231,6 +239,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
@@ -387,7 +398,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
3, /* Ethernet */
0, /* Image Sensor Interface */
2, /* USB Device High speed port */
- 0,
+ 0, /* AESTDESSHA Crypto HW Accelerators */
0, /* Multimedia Card Interface 1 */
0,
0, /* Advanced Interrupt Controller (IRQ0) */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 933fc9a..7102f62 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
+#include <linux/platform_data/atmel-aes.h>
#include <linux/platform_data/at91_adc.h>
@@ -1830,6 +1831,130 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_add_device_serial(void) {}
#endif
+/* --------------------------------------------------------------------
+ * SHA1/SHA256
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE)
+static struct resource sha_resources[] = {
+ {
+ .start = AT91SAM9G45_BASE_SHA,
+ .end = AT91SAM9G45_BASE_SHA + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AESTDESSHA,
+ .end = AT91SAM9G45_ID_AESTDESSHA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_sha_device = {
+ .name = "atmel_sha",
+ .id = -1,
+ .resource = sha_resources,
+ .num_resources = ARRAY_SIZE(sha_resources),
+};
+
+static void __init at91_add_device_sha(void)
+{
+ platform_device_register(&at91sam9g45_sha_device);
+}
+#else
+static void __init at91_add_device_sha(void) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * DES/TDES
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE)
+static struct resource tdes_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TDES,
+ .end = AT91SAM9G45_BASE_TDES + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AESTDESSHA,
+ .end = AT91SAM9G45_ID_AESTDESSHA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_tdes_device = {
+ .name = "atmel_tdes",
+ .id = -1,
+ .resource = tdes_resources,
+ .num_resources = ARRAY_SIZE(tdes_resources),
+};
+
+static void __init at91_add_device_tdes(void)
+{
+ platform_device_register(&at91sam9g45_tdes_device);
+}
+#else
+static void __init at91_add_device_tdes(void) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * AES
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE)
+static struct aes_platform_data aes_data;
+static u64 aes_dmamask = DMA_BIT_MASK(32);
+
+static struct resource aes_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_AES,
+ .end = AT91SAM9G45_BASE_AES + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AESTDESSHA,
+ .end = AT91SAM9G45_ID_AESTDESSHA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_aes_device = {
+ .name = "atmel_aes",
+ .id = -1,
+ .dev = {
+ .dma_mask = &aes_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &aes_data,
+ },
+ .resource = aes_resources,
+ .num_resources = ARRAY_SIZE(aes_resources),
+};
+
+static void __init at91_add_device_aes(void)
+{
+ struct at_dma_slave *atslave;
+ struct aes_dma_data *alt_atslave;
+
+ alt_atslave = kzalloc(sizeof(struct aes_dma_data), GFP_KERNEL);
+
+ /* DMA TX slave channel configuration */
+ atslave = &alt_atslave->txdata;
+ atslave->dma_dev = &at_hdmac_device.dev;
+ atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW |
+ ATC_SRC_PER(AT_DMA_ID_AES_RX);
+
+ /* DMA RX slave channel configuration */
+ atslave = &alt_atslave->rxdata;
+ atslave->dma_dev = &at_hdmac_device.dev;
+ atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW |
+ ATC_DST_PER(AT_DMA_ID_AES_TX);
+
+ aes_data.dma_slave = alt_atslave;
+ platform_device_register(&at91sam9g45_aes_device);
+}
+#else
+static void __init at91_add_device_aes(void) {}
+#endif
/* -------------------------------------------------------------------- */
/*
@@ -1847,6 +1972,9 @@ static int __init at91_add_standard_devices(void)
at91_add_device_trng();
at91_add_device_watchdog();
at91_add_device_tc();
+ at91_add_device_sha();
+ at91_add_device_tdes();
+ at91_add_device_aes();
return 0;
}
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 3a4da24..8eba102 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -136,6 +136,8 @@
#define AT_DMA_ID_SSC1_RX 8
#define AT_DMA_ID_AC97_TX 9
#define AT_DMA_ID_AC97_RX 10
+#define AT_DMA_ID_AES_TX 11
+#define AT_DMA_ID_AES_RX 12
#define AT_DMA_ID_MCI1 13
#endif
diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h
new file mode 100644
index 0000000..e7a1949
--- /dev/null
+++ b/include/linux/platform_data/atmel-aes.h
@@ -0,0 +1,22 @@
+#ifndef __LINUX_ATMEL_AES_H
+#define __LINUX_ATMEL_AES_H
+
+#include <mach/at_hdmac.h>
+
+/**
+ * struct aes_dma_data - DMA data for AES
+ */
+struct aes_dma_data {
+ struct at_dma_slave txdata;
+ struct at_dma_slave rxdata;
+};
+
+/**
+ * struct aes_platform_data - board-specific AES configuration
+ * @dma_slave: DMA slave interface to use in data transfers.
+ */
+struct aes_platform_data {
+ struct aes_dma_data *dma_slave;
+};
+
+#endif /* __LINUX_ATMEL_AES_H */
--
1.7.7.6
WARNING: multiple messages have this Message-ID (diff)
From: eric@eukrea.com (Eric Bénard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: AT91SAM9G45: add crypto peripherals
Date: Sun, 1 Jul 2012 19:19:43 +0200 [thread overview]
Message-ID: <1341163187-14946-2-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1341163187-14946-1-git-send-email-eric@eukrea.com>
From: Nicolas Royer <nicolas@eukrea.com>
Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric B?nard <eric@eukrea.com>
Tested-by: Eric B?nard <eric@eukrea.com>
---
arch/arm/mach-at91/at91sam9g45.c | 13 +++-
arch/arm/mach-at91/at91sam9g45_devices.c | 128 +++++++++++++++++++++++++
arch/arm/mach-at91/include/mach/at91sam9g45.h | 2 +
include/linux/platform_data/atmel-aes.h | 22 ++++
4 files changed, 164 insertions(+), 1 deletions(-)
create mode 100644 include/linux/platform_data/atmel-aes.h
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 4792682..da6dc0f 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -182,6 +182,13 @@ static struct clk adc_op_clk = {
.rate_hz = 13200000,
};
+/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
+static struct clk aestdessha_clk = {
+ .name = "aestdessha_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
@@ -211,6 +218,7 @@ static struct clk *periph_clocks[] __initdata = {
&udphs_clk,
&mmc1_clk,
&adc_op_clk,
+ &aestdessha_clk,
// irq0
};
@@ -231,6 +239,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
@@ -387,7 +398,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
3, /* Ethernet */
0, /* Image Sensor Interface */
2, /* USB Device High speed port */
- 0,
+ 0, /* AESTDESSHA Crypto HW Accelerators */
0, /* Multimedia Card Interface 1 */
0,
0, /* Advanced Interrupt Controller (IRQ0) */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 933fc9a..7102f62 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
+#include <linux/platform_data/atmel-aes.h>
#include <linux/platform_data/at91_adc.h>
@@ -1830,6 +1831,130 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_add_device_serial(void) {}
#endif
+/* --------------------------------------------------------------------
+ * SHA1/SHA256
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE)
+static struct resource sha_resources[] = {
+ {
+ .start = AT91SAM9G45_BASE_SHA,
+ .end = AT91SAM9G45_BASE_SHA + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AESTDESSHA,
+ .end = AT91SAM9G45_ID_AESTDESSHA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_sha_device = {
+ .name = "atmel_sha",
+ .id = -1,
+ .resource = sha_resources,
+ .num_resources = ARRAY_SIZE(sha_resources),
+};
+
+static void __init at91_add_device_sha(void)
+{
+ platform_device_register(&at91sam9g45_sha_device);
+}
+#else
+static void __init at91_add_device_sha(void) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * DES/TDES
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE)
+static struct resource tdes_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TDES,
+ .end = AT91SAM9G45_BASE_TDES + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AESTDESSHA,
+ .end = AT91SAM9G45_ID_AESTDESSHA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_tdes_device = {
+ .name = "atmel_tdes",
+ .id = -1,
+ .resource = tdes_resources,
+ .num_resources = ARRAY_SIZE(tdes_resources),
+};
+
+static void __init at91_add_device_tdes(void)
+{
+ platform_device_register(&at91sam9g45_tdes_device);
+}
+#else
+static void __init at91_add_device_tdes(void) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * AES
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE)
+static struct aes_platform_data aes_data;
+static u64 aes_dmamask = DMA_BIT_MASK(32);
+
+static struct resource aes_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_AES,
+ .end = AT91SAM9G45_BASE_AES + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AESTDESSHA,
+ .end = AT91SAM9G45_ID_AESTDESSHA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_aes_device = {
+ .name = "atmel_aes",
+ .id = -1,
+ .dev = {
+ .dma_mask = &aes_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &aes_data,
+ },
+ .resource = aes_resources,
+ .num_resources = ARRAY_SIZE(aes_resources),
+};
+
+static void __init at91_add_device_aes(void)
+{
+ struct at_dma_slave *atslave;
+ struct aes_dma_data *alt_atslave;
+
+ alt_atslave = kzalloc(sizeof(struct aes_dma_data), GFP_KERNEL);
+
+ /* DMA TX slave channel configuration */
+ atslave = &alt_atslave->txdata;
+ atslave->dma_dev = &at_hdmac_device.dev;
+ atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW |
+ ATC_SRC_PER(AT_DMA_ID_AES_RX);
+
+ /* DMA RX slave channel configuration */
+ atslave = &alt_atslave->rxdata;
+ atslave->dma_dev = &at_hdmac_device.dev;
+ atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW |
+ ATC_DST_PER(AT_DMA_ID_AES_TX);
+
+ aes_data.dma_slave = alt_atslave;
+ platform_device_register(&at91sam9g45_aes_device);
+}
+#else
+static void __init at91_add_device_aes(void) {}
+#endif
/* -------------------------------------------------------------------- */
/*
@@ -1847,6 +1972,9 @@ static int __init at91_add_standard_devices(void)
at91_add_device_trng();
at91_add_device_watchdog();
at91_add_device_tc();
+ at91_add_device_sha();
+ at91_add_device_tdes();
+ at91_add_device_aes();
return 0;
}
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 3a4da24..8eba102 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -136,6 +136,8 @@
#define AT_DMA_ID_SSC1_RX 8
#define AT_DMA_ID_AC97_TX 9
#define AT_DMA_ID_AC97_RX 10
+#define AT_DMA_ID_AES_TX 11
+#define AT_DMA_ID_AES_RX 12
#define AT_DMA_ID_MCI1 13
#endif
diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h
new file mode 100644
index 0000000..e7a1949
--- /dev/null
+++ b/include/linux/platform_data/atmel-aes.h
@@ -0,0 +1,22 @@
+#ifndef __LINUX_ATMEL_AES_H
+#define __LINUX_ATMEL_AES_H
+
+#include <mach/at_hdmac.h>
+
+/**
+ * struct aes_dma_data - DMA data for AES
+ */
+struct aes_dma_data {
+ struct at_dma_slave txdata;
+ struct at_dma_slave rxdata;
+};
+
+/**
+ * struct aes_platform_data - board-specific AES configuration
+ * @dma_slave: DMA slave interface to use in data transfers.
+ */
+struct aes_platform_data {
+ struct aes_dma_data *dma_slave;
+};
+
+#endif /* __LINUX_ATMEL_AES_H */
--
1.7.7.6
next prev parent reply other threads:[~2012-07-01 17:19 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-01 17:19 [PATCH 0/5] AT91SAM9G46/M11: add crypto drivers Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-01 17:19 ` Eric Bénard [this message]
2012-07-01 17:19 ` [PATCH 1/5] ARM: AT91SAM9G45: add crypto peripherals Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-01 17:19 ` [PATCH 2/5] crypto: add Atmel AES driver Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-06 12:17 ` Jean-Christophe PLAGNIOL-VILLARD
2012-07-06 12:17 ` Jean-Christophe PLAGNIOL-VILLARD
2012-07-06 12:17 ` Jean-Christophe PLAGNIOL-VILLARD
2012-07-06 13:25 ` Eric Bénard
2012-07-06 13:25 ` Eric Bénard
2012-07-06 13:25 ` Eric Bénard
2012-07-01 17:19 ` [PATCH 3/5] crypto: add Atmel DES/TDES driver Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-01 17:19 ` [PATCH 4/5] crypto: add Atmel SHA1/SHA256 driver Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-01 17:19 ` [PATCH 5/5] crypto: add new tests to tcrypt Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-01 17:19 ` Eric Bénard
2012-07-11 3:25 ` [PATCH 0/5] AT91SAM9G46/M11: add crypto drivers Herbert Xu
2012-07-11 3:25 ` Herbert Xu
2012-07-11 3:25 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341163187-14946-2-git-send-email-eric@eukrea.com \
--to=eric@eukrea.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=nicolas@eukrea.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.