All of lore.kernel.org
 help / color / mirror / Atom feed
From: Omar Ramirez Luna <omar.luna@linaro.org>
To: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>,
	Tony Lindgren <tony@atomide.com>,
	Russell King <linux@arm.linux.org.uk>,
	Kevin Hilman <khilman@ti.com>, Ohad Ben-Cohen <ohad@wizery.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Omar Ramirez Luna <omar.luna@linaro.org>
Subject: [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence
Date: Mon, 16 Jul 2012 14:21:24 -0500	[thread overview]
Message-ID: <1342466485-1050-3-git-send-email-omar.luna@linaro.org> (raw)
In-Reply-To: <1342466485-1050-1-git-send-email-omar.luna@linaro.org>

For a reset sequence to complete cleanly, a module needs its
associated clocks to be enabled, otherwise the timeout check
in prcm code can print a false failure (failed to hardreset)
that occurs because the clocks aren't powered ON and the status
bit checked can't transition without them.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
---
 arch/arm/mach-omap2/omap_hwmod.c |   33 +++++++++++++++++++++++++++++++++
 1 files changed, 33 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 091c199..f6f8d99 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1509,6 +1509,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
 	int ret = -EINVAL;
+	int hwsup = 0;
 
 	if (!oh)
 		return -EINVAL;
@@ -1520,10 +1521,42 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 	if (IS_ERR_VALUE(ret))
 		return ret;
 
+	if (oh->clkdm) {
+		/*
+		 * A clockdomain must be in SW_SUP otherwise reset
+		 * might not be completed. The clockdomain can be set
+		 * in HW_AUTO only when the module become ready.
+		 */
+		hwsup = clkdm_in_hwsup(oh->clkdm);
+		ret = clkdm_hwmod_enable(oh->clkdm, oh);
+		if (ret) {
+			WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
+			     oh->name, oh->clkdm->name, ret);
+			return ret;
+		}
+	}
+
+	_enable_clocks(oh);
+
 	ret = soc_ops.deassert_hardreset(oh, &ohri);
+
+	_disable_clocks(oh);
+
 	if (ret == -EBUSY)
 		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
+	if (!ret) {
+		/*
+		 * Set the clockdomain to HW_AUTO, assuming that the
+		 * previous state was HW_AUTO.
+		 */
+		if (oh->clkdm && hwsup)
+			clkdm_allow_idle(oh->clkdm);
+	} else {
+		if (oh->clkdm)
+			clkdm_hwmod_disable(oh->clkdm, oh);
+	}
+
 	return ret;
 }
 
-- 
1.7.4.1


WARNING: multiple messages have this Message-ID (diff)
From: omar.luna@linaro.org (Omar Ramirez Luna)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence
Date: Mon, 16 Jul 2012 14:21:24 -0500	[thread overview]
Message-ID: <1342466485-1050-3-git-send-email-omar.luna@linaro.org> (raw)
In-Reply-To: <1342466485-1050-1-git-send-email-omar.luna@linaro.org>

For a reset sequence to complete cleanly, a module needs its
associated clocks to be enabled, otherwise the timeout check
in prcm code can print a false failure (failed to hardreset)
that occurs because the clocks aren't powered ON and the status
bit checked can't transition without them.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
---
 arch/arm/mach-omap2/omap_hwmod.c |   33 +++++++++++++++++++++++++++++++++
 1 files changed, 33 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 091c199..f6f8d99 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1509,6 +1509,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	struct omap_hwmod_rst_info ohri;
 	int ret = -EINVAL;
+	int hwsup = 0;
 
 	if (!oh)
 		return -EINVAL;
@@ -1520,10 +1521,42 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 	if (IS_ERR_VALUE(ret))
 		return ret;
 
+	if (oh->clkdm) {
+		/*
+		 * A clockdomain must be in SW_SUP otherwise reset
+		 * might not be completed. The clockdomain can be set
+		 * in HW_AUTO only when the module become ready.
+		 */
+		hwsup = clkdm_in_hwsup(oh->clkdm);
+		ret = clkdm_hwmod_enable(oh->clkdm, oh);
+		if (ret) {
+			WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
+			     oh->name, oh->clkdm->name, ret);
+			return ret;
+		}
+	}
+
+	_enable_clocks(oh);
+
 	ret = soc_ops.deassert_hardreset(oh, &ohri);
+
+	_disable_clocks(oh);
+
 	if (ret == -EBUSY)
 		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
+	if (!ret) {
+		/*
+		 * Set the clockdomain to HW_AUTO, assuming that the
+		 * previous state was HW_AUTO.
+		 */
+		if (oh->clkdm && hwsup)
+			clkdm_allow_idle(oh->clkdm);
+	} else {
+		if (oh->clkdm)
+			clkdm_hwmod_disable(oh->clkdm, oh);
+	}
+
 	return ret;
 }
 
-- 
1.7.4.1

  parent reply	other threads:[~2012-07-16 19:21 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-16 19:21 [PATCH 0/3] OMAP: hwmod: reset API proposal Omar Ramirez Luna
2012-07-16 19:21 ` Omar Ramirez Luna
2012-07-16 19:21 ` [PATCH 1/3] ARM: OMAP: hwmod: partially un-reset hwmods might not be properly enabled Omar Ramirez Luna
2012-07-16 19:21   ` Omar Ramirez Luna
2012-08-20 14:49   ` Benoit Cousson
2012-08-20 14:49     ` Benoit Cousson
2012-08-20 14:49     ` Benoit Cousson
2012-08-21  1:13     ` Omar Ramirez Luna
2012-08-21  1:13       ` Omar Ramirez Luna
2012-08-21 17:48     ` Omar Ramirez Luna
2012-08-21 17:48       ` Omar Ramirez Luna
2012-07-16 19:21 ` Omar Ramirez Luna [this message]
2012-07-16 19:21   ` [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence Omar Ramirez Luna
2012-08-02  7:52   ` Paul Walmsley
2012-08-02  7:52     ` Paul Walmsley
2012-08-02 22:20     ` Omar Ramirez Luna
2012-08-02 22:20       ` Omar Ramirez Luna
2012-08-03  5:24       ` Vaibhav Hiremath
2012-08-03  5:24         ` Vaibhav Hiremath
2012-08-03  5:24         ` Vaibhav Hiremath
2012-08-03 15:52         ` Omar Ramirez Luna
2012-08-03 15:52           ` Omar Ramirez Luna
2012-08-20 10:21           ` Benoit Cousson
2012-08-20 10:21             ` Benoit Cousson
2012-08-20 10:21             ` Benoit Cousson
2012-08-21  1:15             ` Omar Ramirez Luna
2012-08-21  1:15               ` Omar Ramirez Luna
2012-07-16 19:21 ` [PATCH 3/3] ARM: OMAP: omap_device: expose hwmod assert/deassert to omap devices Omar Ramirez Luna
2012-07-16 19:21   ` Omar Ramirez Luna
2012-08-02  7:43   ` Paul Walmsley
2012-08-02  7:43     ` Paul Walmsley
2012-08-02 17:56     ` Omar Ramirez Luna
2012-08-02 17:56       ` Omar Ramirez Luna
  -- strict thread matches above, loose matches on Subject: below --
2012-06-16  1:54 [PATCH 0/3] OMAP: hwmod: reset API proposal Omar Ramirez Luna
2012-06-16  1:54 ` [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence Omar Ramirez Luna
2012-06-16  1:54   ` Omar Ramirez Luna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1342466485-1050-3-git-send-email-omar.luna@linaro.org \
    --to=omar.luna@linaro.org \
    --cc=b-cousson@ti.com \
    --cc=khilman@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=ohad@wizery.com \
    --cc=paul@pwsan.com \
    --cc=tomi.valkeinen@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.