From: Maxime Ripard <maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org Subject: [PATCHv2 0/4] Add support for the OLED in the CFA10036 Date: Tue, 31 Jul 2012 10:29:32 +0000 [thread overview] Message-ID: <1343730576-20494-1-git-send-email-maxime.ripard@free-electrons.com> (raw) Hi everyone, This patchset adds support for the solomon SSD1307 OLED controller present in the CFA-10036 board. It first adds the framebuffer driver for this controller, and then the needed bits to enable it in the cfa10036 dts. Thanks, Maxime Changes from v1: * Did some factorisation of the ssd1307fb_write* functions. * Filled the smem_start field of the fb_fix_screeninfo structure * Fixed the broken pwm declaration * Change the names of oled-reset-gpios and reset-active-low properties in the device tree to oled-reset-gpio and oled-reset-active-low for consistency Maxime Ripard (4): video: Add support for the Solomon SSD1307 OLED Controller ARM: dts: mxs: Add alternative I2C muxing options for imx28 ARM: dts: mxs: Add pwm4 muxing options for imx28 ARM: dts: mxs: add oled support for the cfa-10036 .../devicetree/bindings/video/ssd1307fb.txt | 24 ++ arch/arm/boot/dts/imx28-cfa10036.dts | 20 + arch/arm/boot/dts/imx28.dtsi | 18 + drivers/video/Kconfig | 14 + drivers/video/Makefile | 1 + drivers/video/ssd1307fb.c | 418 ++++++++++++++++++++ 6 files changed, 495 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/ssd1307fb.txt create mode 100644 drivers/video/ssd1307fb.c -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard) To: linux-arm-kernel@lists.infradead.org Subject: [PATCHv2 0/4] Add support for the OLED in the CFA10036 Date: Tue, 31 Jul 2012 12:29:32 +0200 [thread overview] Message-ID: <1343730576-20494-1-git-send-email-maxime.ripard@free-electrons.com> (raw) Hi everyone, This patchset adds support for the solomon SSD1307 OLED controller present in the CFA-10036 board. It first adds the framebuffer driver for this controller, and then the needed bits to enable it in the cfa10036 dts. Thanks, Maxime Changes from v1: * Did some factorisation of the ssd1307fb_write* functions. * Filled the smem_start field of the fb_fix_screeninfo structure * Fixed the broken pwm declaration * Change the names of oled-reset-gpios and reset-active-low properties in the device tree to oled-reset-gpio and oled-reset-active-low for consistency Maxime Ripard (4): video: Add support for the Solomon SSD1307 OLED Controller ARM: dts: mxs: Add alternative I2C muxing options for imx28 ARM: dts: mxs: Add pwm4 muxing options for imx28 ARM: dts: mxs: add oled support for the cfa-10036 .../devicetree/bindings/video/ssd1307fb.txt | 24 ++ arch/arm/boot/dts/imx28-cfa10036.dts | 20 + arch/arm/boot/dts/imx28.dtsi | 18 + drivers/video/Kconfig | 14 + drivers/video/Makefile | 1 + drivers/video/ssd1307fb.c | 418 ++++++++++++++++++++ 6 files changed, 495 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/ssd1307fb.txt create mode 100644 drivers/video/ssd1307fb.c -- 1.7.9.5
next reply other threads:[~2012-07-31 10:29 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-07-31 10:29 Maxime Ripard [this message] 2012-07-31 10:29 ` [PATCHv2 0/4] Add support for the OLED in the CFA10036 Maxime Ripard 2012-07-31 10:29 ` [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller Maxime Ripard 2012-07-31 10:29 ` Maxime Ripard 2012-07-31 15:41 ` Amarnath Revanna 2012-08-01 5:24 ` Shawn Guo 2012-08-01 5:24 ` Shawn Guo 2012-08-01 10:28 ` Maxime Ripard 2012-08-01 10:28 ` Maxime Ripard 2012-08-02 0:34 ` Shawn Guo 2012-08-02 0:34 ` Shawn Guo 2012-08-02 13:35 ` Maxime Ripard 2012-08-02 13:35 ` Maxime Ripard 2012-08-01 5:44 ` Jingoo Han 2012-08-01 5:44 ` Jingoo Han 2012-07-31 10:29 ` [PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28 Maxime Ripard 2012-07-31 10:29 ` Maxime Ripard 2012-07-31 12:02 ` Fabio Estevam 2012-07-31 12:02 ` Fabio Estevam 2012-08-01 9:46 ` Maxime Ripard 2012-08-01 9:46 ` Maxime Ripard 2012-07-31 10:29 ` [PATCH 3/4] ARM: dts: mxs: Add pwm4 " Maxime Ripard 2012-07-31 10:29 ` Maxime Ripard 2012-07-31 10:29 ` [PATCH 4/4] ARM: dts: mxs: add oled support for the cfa-10036 Maxime Ripard 2012-07-31 10:29 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1343730576-20494-1-git-send-email-maxime.ripard@free-electrons.com \ --to=maxime.ripard@free-electrons.com \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.