From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/10] ARM: mach-shmobile: marzen: defconfig update
Date: Fri, 31 Aug 2012 00:34:38 +0000 [thread overview]
Message-ID: <1346373285-19588-4-git-send-email-horms@verge.net.au> (raw)
In-Reply-To: <1346373285-19588-1-git-send-email-horms@verge.net.au>
Update marzen defconfig
* Enable MMC Block device as SDHI hw is now supported.
* Default to NFS root, this is consistent with many other
shmobile boards
* Enable UNIX which is required by udevd
Other changes are noise due to using make savedefconfig
to create the new defconfig.
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
arch/arm/configs/marzen_defconfig | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index bf42ad2..cd2dc21 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -1,13 +1,14 @@
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_EXPERIMENTAL=y
CONFIG_KERNEL_LZMA=y
+CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT\x16
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
+# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE=y
CONFIG_ARCH_R8A7779=y
CONFIG_MACH_MARZEN=y
@@ -21,7 +22,6 @@ CONFIG_ARM_ERRATA_458693=y
CONFIG_ARM_ERRATA_460075=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
CONFIG_SMP=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_AEABI=y
@@ -29,13 +29,16 @@ CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"
CONFIG_CMDLINE_FORCE=y
CONFIG_KEXEC=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
+CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -69,16 +72,16 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_SSB=y
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
--
1.7.10.2.484.gcd07cc5
WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/10] ARM: mach-shmobile: marzen: defconfig update
Date: Fri, 31 Aug 2012 09:34:38 +0900 [thread overview]
Message-ID: <1346373285-19588-4-git-send-email-horms@verge.net.au> (raw)
In-Reply-To: <1346373285-19588-1-git-send-email-horms@verge.net.au>
Update marzen defconfig
* Enable MMC Block device as SDHI hw is now supported.
* Default to NFS root, this is consistent with many other
shmobile boards
* Enable UNIX which is required by udevd
Other changes are noise due to using make savedefconfig
to create the new defconfig.
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
arch/arm/configs/marzen_defconfig | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index bf42ad2..cd2dc21 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -1,13 +1,14 @@
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_EXPERIMENTAL=y
CONFIG_KERNEL_LZMA=y
+CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
+# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE=y
CONFIG_ARCH_R8A7779=y
CONFIG_MACH_MARZEN=y
@@ -21,7 +22,6 @@ CONFIG_ARM_ERRATA_458693=y
CONFIG_ARM_ERRATA_460075=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
CONFIG_SMP=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_AEABI=y
@@ -29,13 +29,16 @@ CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"
CONFIG_CMDLINE_FORCE=y
CONFIG_KEXEC=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
+CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -69,16 +72,16 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_SSB=y
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
--
1.7.10.2.484.gcd07cc5
next prev parent reply other threads:[~2012-08-31 0:34 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-31 0:34 [GIT PULL] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7 Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:34 ` [PATCH 01/10] r8a7779: add SDHI clock support Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:34 ` [PATCH 02/10] marzen: add SDHI0 support Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:34 ` Simon Horman [this message]
2012-08-31 0:34 ` [PATCH 03/10] ARM: mach-shmobile: marzen: defconfig update Simon Horman
2012-08-31 0:34 ` [PATCH 04/10] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:34 ` [PATCH 05/10] ARM: shmobile: r8a7779: add USB common phy initializer Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:34 ` [PATCH 06/10] ARM: shmobile: r8a7779: add USB EHCI clock support Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:34 ` [PATCH 07/10] ARM: shmobile: r8a7779: add USB OHCI " Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:34 ` [PATCH 08/10] ARM: shmobile: marzen: add USB EHCI driver support Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:34 ` [PATCH 09/10] ARM: shmobile: marzen: fixup regulator id for smsc911x Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:34 ` [PATCH 10/10] ARM: shmobile: marzen: enable thermal sensor Simon Horman
2012-08-31 0:34 ` Simon Horman
2012-08-31 0:41 ` [GIT PULL] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7 Simon Horman
2012-08-31 0:41 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346373285-19588-4-git-send-email-horms@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.