From: Padmavathi Venna <padma.v@samsung.com>
To: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, padma.kvr@gmail.com
Cc: sbkim73@samsung.com, broonie@opensource.wolfsonmicro.com,
kgene.kim@samsung.com, olof@lixom.net, jhbird.choi@samsung.com
Subject: [PATCH 1/5] ARM: S3C64XX: Add I2S clkdev support
Date: Wed, 19 Dec 2012 11:05:49 +0530 [thread overview]
Message-ID: <1355895353-10316-2-git-send-email-padma.v@samsung.com> (raw)
In-Reply-To: <1355895353-10316-1-git-send-email-padma.v@samsung.com>
I2S controller has an internal mux for RCLK source clks. The list
of source clk names were passed through platform data in non-dt case.
Register the existing RCLK source clocks with clkdev using generic
connection id. This is required as part of adding DT support
for I2S controller driver.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
---
arch/arm/mach-s3c64xx/clock.c | 126 ++++++++++++++++++++++--------------
arch/arm/mach-s3c64xx/dev-audio.c | 11 ---
2 files changed, 77 insertions(+), 60 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 1a6f857..803711e 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -149,25 +149,6 @@ static struct clk init_clocks_off[] = {
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
}, {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS0,
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS1,
- }, {
-#ifdef CONFIG_CPU_S3C6410
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
- }, {
-#endif
.name = "keypad",
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
@@ -337,6 +318,32 @@ static struct clk clk_48m_spi1 = {
.ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
};
+static struct clk clk_i2s0 = {
+ .name = "iis",
+ .devname = "samsung-i2s.0",
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIS0,
+};
+
+static struct clk clk_i2s1 = {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIS1,
+};
+
+#ifdef CONFIG_CPU_S3C6410
+static struct clk clk_i2s2 = {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
+};
+#endif
+
static struct clk init_clocks[] = {
{
.name = "lcd",
@@ -660,6 +667,7 @@ static struct clksrc_sources clkset_audio1 = {
.nr_sources = ARRAY_SIZE(clkset_audio1_list),
};
+#ifdef CONFIG_CPU_S3C6410
static struct clk *clkset_audio2_list[] = {
[0] = &clk_mout_epll.clk,
[1] = &clk_dout_mpll,
@@ -672,6 +680,7 @@ static struct clksrc_sources clkset_audio2 = {
.sources = clkset_audio2_list,
.nr_sources = ARRAY_SIZE(clkset_audio2_list),
};
+#endif
static struct clksrc_clk clksrcs[] = {
{
@@ -685,36 +694,6 @@ static struct clksrc_clk clksrcs[] = {
.sources = &clkset_uhost,
}, {
.clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.0",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 },
- .sources = &clkset_audio0,
- }, {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.1",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 },
- .sources = &clkset_audio1,
- }, {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.2",
- .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 },
- .sources = &clkset_audio2,
- }, {
- .clk = {
.name = "irda-bus",
.ctrlbit = S3C_CLKCON_SCLK_IRDA,
.enable = s3c64xx_sclk_ctrl,
@@ -805,6 +784,43 @@ static struct clksrc_clk clk_sclk_spi1 = {
.sources = &clkset_spi_mmc,
};
+static struct clksrc_clk clk_audio_bus0 = {
+ .clk = {
+ .name = "audio-bus",
+ .devname = "samsung-i2s.0",
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 },
+ .sources = &clkset_audio0,
+};
+
+static struct clksrc_clk clk_audio_bus1 = {
+ .clk = {
+ .name = "audio-bus",
+ .devname = "samsung-i2s.1",
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 },
+ .sources = &clkset_audio1,
+};
+
+#ifdef CONFIG_CPU_S3C6410
+static struct clksrc_clk clk_audio_bus2 = {
+ .clk = {
+ .name = "audio-bus",
+ .devname = "samsung-i2s.2",
+ .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 },
+ .sources = &clkset_audio2,
+};
+#endif
/* Clock initialisation code */
static struct clksrc_clk *init_parents[] = {
@@ -820,6 +836,8 @@ static struct clksrc_clk *clksrc_cdev[] = {
&clk_sclk_mmc2,
&clk_sclk_spi0,
&clk_sclk_spi1,
+ &clk_audio_bus0,
+ &clk_audio_bus1,
};
static struct clk *clk_cdev[] = {
@@ -828,6 +846,8 @@ static struct clk *clk_cdev[] = {
&clk_hsmmc2,
&clk_48m_spi0,
&clk_48m_spi1,
+ &clk_i2s0,
+ &clk_i2s1,
};
static struct clk_lookup s3c64xx_clk_lookup[] = {
@@ -844,6 +864,14 @@ static struct clk_lookup s3c64xx_clk_lookup[] = {
CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
+ CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
+ CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk),
+ CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
+ CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk),
+#ifdef CONFIG_CPU_S3C6410
+ CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
+ CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk),
+#endif
};
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 35f3e07..e367e87 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -23,11 +23,6 @@
#include <linux/platform_data/asoc-s3c.h>
#include <plat/gpio-cfg.h>
-static const char *rclksrc[] = {
- [0] = "iis",
- [1] = "audio-bus",
-};
-
static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
{
unsigned int base;
@@ -64,11 +59,6 @@ static struct resource s3c64xx_iis0_resource[] = {
static struct s3c_audio_pdata i2sv3_pdata = {
.cfg_gpio = s3c64xx_i2s_cfg_gpio,
- .type = {
- .i2s = {
- .src_clk = rclksrc,
- },
- },
};
struct platform_device s3c64xx_device_iis0 = {
@@ -110,7 +100,6 @@ static struct s3c_audio_pdata i2sv4_pdata = {
.type = {
.i2s = {
.quirks = QUIRK_PRI_6CHAN,
- .src_clk = rclksrc,
},
},
};
--
1.7.4.4
WARNING: multiple messages have this Message-ID (diff)
From: padma.v@samsung.com (Padmavathi Venna)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: S3C64XX: Add I2S clkdev support
Date: Wed, 19 Dec 2012 11:05:49 +0530 [thread overview]
Message-ID: <1355895353-10316-2-git-send-email-padma.v@samsung.com> (raw)
In-Reply-To: <1355895353-10316-1-git-send-email-padma.v@samsung.com>
I2S controller has an internal mux for RCLK source clks. The list
of source clk names were passed through platform data in non-dt case.
Register the existing RCLK source clocks with clkdev using generic
connection id. This is required as part of adding DT support
for I2S controller driver.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
---
arch/arm/mach-s3c64xx/clock.c | 126 ++++++++++++++++++++++--------------
arch/arm/mach-s3c64xx/dev-audio.c | 11 ---
2 files changed, 77 insertions(+), 60 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 1a6f857..803711e 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -149,25 +149,6 @@ static struct clk init_clocks_off[] = {
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
}, {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS0,
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS1,
- }, {
-#ifdef CONFIG_CPU_S3C6410
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
- }, {
-#endif
.name = "keypad",
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
@@ -337,6 +318,32 @@ static struct clk clk_48m_spi1 = {
.ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
};
+static struct clk clk_i2s0 = {
+ .name = "iis",
+ .devname = "samsung-i2s.0",
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIS0,
+};
+
+static struct clk clk_i2s1 = {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIS1,
+};
+
+#ifdef CONFIG_CPU_S3C6410
+static struct clk clk_i2s2 = {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
+};
+#endif
+
static struct clk init_clocks[] = {
{
.name = "lcd",
@@ -660,6 +667,7 @@ static struct clksrc_sources clkset_audio1 = {
.nr_sources = ARRAY_SIZE(clkset_audio1_list),
};
+#ifdef CONFIG_CPU_S3C6410
static struct clk *clkset_audio2_list[] = {
[0] = &clk_mout_epll.clk,
[1] = &clk_dout_mpll,
@@ -672,6 +680,7 @@ static struct clksrc_sources clkset_audio2 = {
.sources = clkset_audio2_list,
.nr_sources = ARRAY_SIZE(clkset_audio2_list),
};
+#endif
static struct clksrc_clk clksrcs[] = {
{
@@ -685,36 +694,6 @@ static struct clksrc_clk clksrcs[] = {
.sources = &clkset_uhost,
}, {
.clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.0",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 },
- .sources = &clkset_audio0,
- }, {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.1",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 },
- .sources = &clkset_audio1,
- }, {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.2",
- .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 },
- .sources = &clkset_audio2,
- }, {
- .clk = {
.name = "irda-bus",
.ctrlbit = S3C_CLKCON_SCLK_IRDA,
.enable = s3c64xx_sclk_ctrl,
@@ -805,6 +784,43 @@ static struct clksrc_clk clk_sclk_spi1 = {
.sources = &clkset_spi_mmc,
};
+static struct clksrc_clk clk_audio_bus0 = {
+ .clk = {
+ .name = "audio-bus",
+ .devname = "samsung-i2s.0",
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 },
+ .sources = &clkset_audio0,
+};
+
+static struct clksrc_clk clk_audio_bus1 = {
+ .clk = {
+ .name = "audio-bus",
+ .devname = "samsung-i2s.1",
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 },
+ .sources = &clkset_audio1,
+};
+
+#ifdef CONFIG_CPU_S3C6410
+static struct clksrc_clk clk_audio_bus2 = {
+ .clk = {
+ .name = "audio-bus",
+ .devname = "samsung-i2s.2",
+ .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 },
+ .sources = &clkset_audio2,
+};
+#endif
/* Clock initialisation code */
static struct clksrc_clk *init_parents[] = {
@@ -820,6 +836,8 @@ static struct clksrc_clk *clksrc_cdev[] = {
&clk_sclk_mmc2,
&clk_sclk_spi0,
&clk_sclk_spi1,
+ &clk_audio_bus0,
+ &clk_audio_bus1,
};
static struct clk *clk_cdev[] = {
@@ -828,6 +846,8 @@ static struct clk *clk_cdev[] = {
&clk_hsmmc2,
&clk_48m_spi0,
&clk_48m_spi1,
+ &clk_i2s0,
+ &clk_i2s1,
};
static struct clk_lookup s3c64xx_clk_lookup[] = {
@@ -844,6 +864,14 @@ static struct clk_lookup s3c64xx_clk_lookup[] = {
CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
+ CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
+ CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk),
+ CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
+ CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk),
+#ifdef CONFIG_CPU_S3C6410
+ CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
+ CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk),
+#endif
};
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 35f3e07..e367e87 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -23,11 +23,6 @@
#include <linux/platform_data/asoc-s3c.h>
#include <plat/gpio-cfg.h>
-static const char *rclksrc[] = {
- [0] = "iis",
- [1] = "audio-bus",
-};
-
static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
{
unsigned int base;
@@ -64,11 +59,6 @@ static struct resource s3c64xx_iis0_resource[] = {
static struct s3c_audio_pdata i2sv3_pdata = {
.cfg_gpio = s3c64xx_i2s_cfg_gpio,
- .type = {
- .i2s = {
- .src_clk = rclksrc,
- },
- },
};
struct platform_device s3c64xx_device_iis0 = {
@@ -110,7 +100,6 @@ static struct s3c_audio_pdata i2sv4_pdata = {
.type = {
.i2s = {
.quirks = QUIRK_PRI_6CHAN,
- .src_clk = rclksrc,
},
},
};
--
1.7.4.4
next prev parent reply other threads:[~2012-12-19 5:35 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-19 5:35 [PATCH V3 0/5 RESEND] Avoid passing clks through platform data Padmavathi Venna
2012-12-19 5:35 ` Padmavathi Venna
2012-12-19 5:35 ` Padmavathi Venna [this message]
2012-12-19 5:35 ` [PATCH 1/5] ARM: S3C64XX: Add I2S clkdev support Padmavathi Venna
2012-12-19 5:35 ` [PATCH 2/5] ARM: S5PC100: " Padmavathi Venna
2012-12-19 5:35 ` Padmavathi Venna
2012-12-19 5:35 ` [PATCH 3/5] ARM: S5P64X0: " Padmavathi Venna
2012-12-19 5:35 ` Padmavathi Venna
2012-12-19 5:35 ` [PATCH 4/5] ARM: S5PV210: Avoid passing the clks through platform data Padmavathi Venna
2012-12-19 5:35 ` Padmavathi Venna
2012-12-19 5:35 ` [PATCH 5/5] ARM: EXYNOS: " Padmavathi Venna
2012-12-19 5:35 ` Padmavathi Venna
2012-12-19 18:27 ` [PATCH V3 0/5 RESEND] Avoid passing " Kukjin Kim
2012-12-19 18:27 ` Kukjin Kim
-- strict thread matches above, loose matches on Subject: below --
2012-09-27 10:28 [PATCH V1 0/5] " Padmavathi Venna
2012-09-27 10:28 ` [PATCH 1/5] ARM: S3C64XX: Add I2S clkdev support Padmavathi Venna
2012-09-27 10:28 ` Padmavathi Venna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1355895353-10316-2-git-send-email-padma.v@samsung.com \
--to=padma.v@samsung.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=jhbird.choi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=padma.kvr@gmail.com \
--cc=sbkim73@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.