From: Jon Hunter <jon-hunter@ti.com>
To: Tony Lindgren <tony@atomide.com>, Benoit Cousson <b-cousson@ti.com>
Cc: device-tree <devicetree-discuss@lists.ozlabs.org>,
linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>,
Jon Hunter <jon-hunter@ti.com>
Subject: [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates
Date: Fri, 15 Mar 2013 08:57:33 -0500 [thread overview]
Message-ID: <1363355861-11773-1-git-send-email-jon-hunter@ti.com> (raw)
Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
The DMA, PMU and OMAP3430 SDP board changes have been sent before
individually but re-sending here as a complete series for v3.10.
This is based upon Benoit's for_3.10/dts branch [1]. Branch available
here [2].
V2 changes:
- Rebased on Benoit's for_3.10/dts branch
- Squashed patches adding support for OMAP3430 SDP board and patch
to add flash support for OMAP3430 SDP board.
[1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts
[2] git://github.com/jonhunter/linux.git omap-dt-for-v3.10
Jon Hunter (8):
ARM: OMAP2+: Prepare for device-tree PMU support
ARM: dts: OMAP2+: Add PMU nodes
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5
ARM: dts: Add OMAP2 gpio bindings
ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
ARM: dts: OMAP3: Add reg and interrupt properties for gpio
ARM: dts: OMAP3: Add support for OMAP3430 SDP board
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap2.dtsi | 17 ++++
arch/arm/boot/dts/omap2420.dtsi | 55 +++++++++++++
arch/arm/boot/dts/omap2430.dtsi | 66 ++++++++++++++++
arch/arm/boot/dts/omap3.dtsi | 70 +++++++++++++++--
arch/arm/boot/dts/omap3430-sdp.dts | 141 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap4-panda-es.dts | 2 +
arch/arm/boot/dts/omap4.dtsi | 64 +++++++++++++--
arch/arm/boot/dts/omap4460.dtsi | 18 +++++
arch/arm/boot/dts/omap5.dtsi | 68 ++++++++++++++--
arch/arm/mach-omap2/pmu.c | 14 +++-
11 files changed, 493 insertions(+), 23 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3430-sdp.dts
create mode 100644 arch/arm/boot/dts/omap4460.dtsi
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: jon-hunter@ti.com (Jon Hunter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates
Date: Fri, 15 Mar 2013 08:57:33 -0500 [thread overview]
Message-ID: <1363355861-11773-1-git-send-email-jon-hunter@ti.com> (raw)
Various OMAP device-tree updates for PMU, DMA, GPIO, GPMC and boards.
The DMA, PMU and OMAP3430 SDP board changes have been sent before
individually but re-sending here as a complete series for v3.10.
This is based upon Benoit's for_3.10/dts branch [1]. Branch available
here [2].
V2 changes:
- Rebased on Benoit's for_3.10/dts branch
- Squashed patches adding support for OMAP3430 SDP board and patch
to add flash support for OMAP3430 SDP board.
[1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.10/dts
[2] git://github.com/jonhunter/linux.git omap-dt-for-v3.10
Jon Hunter (8):
ARM: OMAP2+: Prepare for device-tree PMU support
ARM: dts: OMAP2+: Add PMU nodes
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5
ARM: dts: Add OMAP2 gpio bindings
ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
ARM: dts: OMAP3: Add reg and interrupt properties for gpio
ARM: dts: OMAP3: Add support for OMAP3430 SDP board
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap2.dtsi | 17 ++++
arch/arm/boot/dts/omap2420.dtsi | 55 +++++++++++++
arch/arm/boot/dts/omap2430.dtsi | 66 ++++++++++++++++
arch/arm/boot/dts/omap3.dtsi | 70 +++++++++++++++--
arch/arm/boot/dts/omap3430-sdp.dts | 141 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap4-panda-es.dts | 2 +
arch/arm/boot/dts/omap4.dtsi | 64 +++++++++++++--
arch/arm/boot/dts/omap4460.dtsi | 18 +++++
arch/arm/boot/dts/omap5.dtsi | 68 ++++++++++++++--
arch/arm/mach-omap2/pmu.c | 14 +++-
11 files changed, 493 insertions(+), 23 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3430-sdp.dts
create mode 100644 arch/arm/boot/dts/omap4460.dtsi
--
1.7.10.4
next reply other threads:[~2013-03-15 13:57 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 13:57 Jon Hunter [this message]
2013-03-15 13:57 ` [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates Jon Hunter
2013-03-15 13:57 ` [PATCH V2 1/8] ARM: OMAP2+: Prepare for device-tree PMU support Jon Hunter
2013-03-15 13:57 ` Jon Hunter
2013-03-15 13:57 ` [PATCH V2 2/8] ARM: dts: OMAP2+: Add PMU nodes Jon Hunter
2013-03-15 13:57 ` Jon Hunter
2013-03-15 13:57 ` [PATCH V2 3/8] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Jon Hunter
2013-03-15 13:57 ` Jon Hunter
2013-03-15 13:57 ` [PATCH V2 4/8] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5 Jon Hunter
2013-03-15 13:57 ` Jon Hunter
2013-03-15 13:57 ` [PATCH V2 5/8] ARM: dts: Add OMAP2 gpio bindings Jon Hunter
2013-03-15 13:57 ` Jon Hunter
2013-03-15 13:57 ` [PATCH V2 6/8] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property Jon Hunter
2013-03-15 13:57 ` Jon Hunter
2013-03-15 13:57 ` [PATCH V2 7/8] ARM: dts: OMAP3: Add reg and interrupt properties for gpio Jon Hunter
2013-03-15 13:57 ` Jon Hunter
2013-03-15 13:57 ` [PATCH V2 8/8] ARM: dts: OMAP3: Add support for OMAP3430 SDP board Jon Hunter
2013-03-15 13:57 ` Jon Hunter
2013-03-15 14:30 ` [PATCH V2 0/8] ARM: dts: Various OMAP2+ device-tree updates Benoit Cousson
2013-03-15 14:30 ` Benoit Cousson
2013-03-17 9:35 ` Anil Kumar
2013-03-17 9:35 ` Anil Kumar
2013-03-18 10:14 ` Benoit Cousson
2013-03-18 10:14 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363355861-11773-1-git-send-email-jon-hunter@ti.com \
--to=jon-hunter@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.