From: Santosh Shilimkar <santosh.shilimkar@ti.com> To: b-cousson@ti.com Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, tony@atomide.com, Santosh Shilimkar <santosh.shilimkar@ti.com> Subject: [PATCH v2 04/11] ARM: dts: OMAP5: Move the gic node out of ocp space Date: Tue, 19 Mar 2013 19:00:50 +0530 [thread overview] Message-ID: <1363699857-5505-5-git-send-email-santosh.shilimkar@ti.com> (raw) In-Reply-To: <1363699857-5505-1-git-send-email-santosh.shilimkar@ti.com> GIC is not part of OCP space so move the gic dt node out of ocp dt address space. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> --- arch/arm/boot/dts/omap5.dtsi | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 71be239..4701244 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -18,6 +18,9 @@ /include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,omap5"; interrupt-parent = <&gic>; @@ -47,6 +50,14 @@ clock-frequency = <6144000>; }; + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -96,14 +107,6 @@ pinctrl-single,function-mask = <0x7fff>; }; - gic: interrupt-controller@48211000 { - compatible = "arm,cortex-a15-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>; - }; - sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: santosh.shilimkar@ti.com (Santosh Shilimkar) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 04/11] ARM: dts: OMAP5: Move the gic node out of ocp space Date: Tue, 19 Mar 2013 19:00:50 +0530 [thread overview] Message-ID: <1363699857-5505-5-git-send-email-santosh.shilimkar@ti.com> (raw) In-Reply-To: <1363699857-5505-1-git-send-email-santosh.shilimkar@ti.com> GIC is not part of OCP space so move the gic dt node out of ocp dt address space. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> --- arch/arm/boot/dts/omap5.dtsi | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 71be239..4701244 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -18,6 +18,9 @@ /include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,omap5"; interrupt-parent = <&gic>; @@ -47,6 +50,14 @@ clock-frequency = <6144000>; }; + gic: interrupt-controller at 48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -96,14 +107,6 @@ pinctrl-single,function-mask = <0x7fff>; }; - gic: interrupt-controller at 48211000 { - compatible = "arm,cortex-a15-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>; - }; - sdma: dma-controller at 4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; -- 1.7.9.5
next prev parent reply other threads:[~2013-03-19 13:29 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-03-19 13:30 [PATCH v2 00/11] ARM: dts: OMAP5: ocp address space and few updates for 3.10 Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 01/11] ARM: dts: omap5-evm: Update available memory to 2032 MB Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 02/11] ARM: dts: OMAP5: Align the local timer dt node as per the current binding code Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 03/11] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar [this message] 2013-03-19 13:30 ` [PATCH v2 04/11] ARM: dts: OMAP5: Move the gic node out of ocp space Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 05/11] ARM: dts: OMAP5: Update the timer and gic nodes for HYP kernel support Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 06/11] ARM: dts: OMAP5: Update keypad reg property Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 07/11] Documentation: dt: OMAP: l3-noc: Add *reg* in required properties Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 08/11] ARM: dts: OMAP4/5: Update l3-noc dt nodes Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 09/11] ARM: dts: OMAP5: Add watchdog timer node Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 10/11] ARM: OMAP2+: hwmod: extract module address space from DT blob Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-03-19 13:30 ` [PATCH v2 11/11] ARM: OMAP2+: omap_hwmod: Don't call _init_mpu_rt_base if no sysc Santosh Shilimkar 2013-03-19 13:30 ` Santosh Shilimkar 2013-04-11 1:46 ` Jon Hunter 2013-04-11 1:46 ` Jon Hunter 2013-04-12 6:18 ` Hiremath, Vaibhav 2013-04-12 6:18 ` Hiremath, Vaibhav 2013-03-26 14:31 ` [PATCH v2 00/11] ARM: dts: OMAP5: ocp address space and few updates for 3.10 Benoit Cousson 2013-03-26 14:31 ` Benoit Cousson 2013-03-26 14:47 ` Santosh Shilimkar 2013-03-26 14:47 ` Santosh Shilimkar
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1363699857-5505-5-git-send-email-santosh.shilimkar@ti.com \ --to=santosh.shilimkar@ti.com \ --cc=b-cousson@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.