All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joel A Fernandes <joelagnel@ti.com>
To: Tony Lindgren <tony@atomide.com>, Sekhar Nori <nsekhar@ti.com>,
	Matt Porter <matt@ohporter.com>,
	Grant Likely <grant.likely@secretlab.ca>,
	Rob Herring <rob.herring@calxeda.com>,
	Vinod Koul <vinod.koul@intel.com>,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Benoit Cousson <b-cousson@ti.com>,
	Russell King <linux@arm.linux.org.uk>,
	Rob Landley <rob@landley.net>,
	Andrew Morton <akpm@linux-foundation.org>,
	Jason Kridner <jkridner@beagleboard.org>,
	Koen Kooi <koen@beagleboard.org>
Cc: Devicetree Discuss <devicetree-discuss@lists.ozlabs.org>,
	Linux OMAP List <linux-omap@vger.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
	Linux DaVinci Kernel List 
	<davinci-linux-open-source@linux.davincidsp.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Linux Documentation List <linux-doc@vger.kernel.org>,
	Linux MMC List <linux-mmc@vger.kernel.org>,
	Linux SPI Devel List  <spi-devel-general@lists.sourceforge.net>,
	Arnd Bergmann <arnd@arndb.de>,
	Joel A Fernandes <joelagnel@ti.com>
Subject: [PATCH v11 2/8] ARM: edma: Add DT and runtime PM support to the private EDMA API
Date: Tue, 18 Jun 2013 01:38:13 -0500	[thread overview]
Message-ID: <1371537499-12970-3-git-send-email-joelagnel@ti.com> (raw)
In-Reply-To: <1371537499-12970-1-git-send-email-joelagnel@ti.com>

From: Matt Porter <mporter@ti.com>

Adds support for parsing the TI EDMA DT data into the required EDMA
private API platform data. Enables runtime PM support to initialize
the EDMA hwmod. Enables build on OMAP.

Changes by Joel:
* Setup default one-to-one mapping for queue_priority and queue_tc
mapping as discussed in [1].
* Split out xbar stuff to separate patch. [1]

[1] https://patchwork.kernel.org/patch/2226761/

Signed-off-by: Matt Porter <mporter@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
---
 arch/arm/common/edma.c             |  190 +++++++++++++++++++++++++++++++++---
 arch/arm/mach-omap2/Kconfig        |    1 +
 include/linux/platform_data/edma.h |    4 +-
 3 files changed, 181 insertions(+), 14 deletions(-)

diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index a1db6cd..9823b79 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -24,6 +24,13 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/edma.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/of_irq.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/platform_data/edma.h>
 
@@ -1369,31 +1376,173 @@ void edma_clear_event(unsigned channel)
 EXPORT_SYMBOL(edma_clear_event);
 
 /*-----------------------------------------------------------------------*/
+static int edma_of_read_u32_to_s8_array(const struct device_node *np,
+					 const char *propname, s8 *out_values,
+					 size_t sz)
+{
+	int ret;
+
+	ret = of_property_read_u8_array(np, propname, out_values, sz);
+	if (ret)
+		return ret;
+
+	/* Terminate it */
+	*out_values++ = -1;
+	*out_values++ = -1;
+
+	return 0;
+}
+
+static int edma_of_read_u32_to_s16_array(const struct device_node *np,
+					 const char *propname, s16 *out_values,
+					 size_t sz)
+{
+	int ret;
+
+	ret = of_property_read_u16_array(np, propname, out_values, sz);
+	if (ret)
+		return ret;
+
+	/* Terminate it */
+	*out_values++ = -1;
+	*out_values++ = -1;
+
+	return 0;
+}
 
-static int __init edma_probe(struct platform_device *pdev)
+static int edma_of_parse_dt(struct device *dev,
+			    struct device_node *node,
+			    struct edma_soc_info *pdata)
+{
+	int ret = 0, i;
+	u32 value;
+	struct property *prop;
+	size_t sz;
+	struct edma_rsv_info *rsv_info;
+	const s16 (*rsv_chans)[2], (*rsv_slots)[2];
+	s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
+
+	memset(pdata, 0, sizeof(struct edma_soc_info));
+
+	ret = of_property_read_u32(node, "dma-channels", &value);
+	if (ret < 0)
+		return ret;
+	pdata->n_channel = value;
+
+	ret = of_property_read_u32(node, "ti,edma-regions", &value);
+	if (ret < 0)
+		return ret;
+	pdata->n_region = value;
+
+	ret = of_property_read_u32(node, "ti,edma-slots", &value);
+	if (ret < 0)
+		return ret;
+	pdata->n_slot = value;
+
+	pdata->n_cc = 1;
+	pdata->n_tc = 3;
+
+	rsv_info =
+		devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
+	if (!rsv_info)
+		return -ENOMEM;
+	pdata->rsv = rsv_info;
+
+	queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
+	if (!queue_tc_map)
+		return -ENOMEM;
+
+	for (i = 0; i < 3; i++)
+		queue_tc_map[i][0] = queue_tc_map[i][1] = i;
+	queue_tc_map[i][0] = queue_tc_map[i][1] = -1;
+
+	pdata->queue_tc_mapping = queue_tc_map;
+
+	queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
+	if (!queue_priority_map)
+		return -ENOMEM;
+
+	for (i = 0; i < 3; i++)
+		queue_priority_map[i][0] = queue_priority_map[i][1] = i;
+	queue_priority_map[i][0] = queue_priority_map[i][1] = -1;
+
+	pdata->queue_priority_mapping = queue_priority_map;
+
+	pdata->default_queue = 0;
+
+
+	return ret;
+}
+
+static struct of_dma_filter_info edma_filter_info = {
+	.filter_fn = edma_filter_fn,
+};
+
+static int edma_probe(struct platform_device *pdev)
 {
 	struct edma_soc_info	**info = pdev->dev.platform_data;
-	const s8		(*queue_priority_mapping)[2];
-	const s8		(*queue_tc_mapping)[2];
+	struct edma_soc_info	*ninfo[EDMA_MAX_CC] = {NULL, NULL};
+	struct edma_soc_info	tmpinfo;
+	s8		(*queue_priority_mapping)[2];
+	s8		(*queue_tc_mapping)[2];
 	int			i, j, off, ln, found = 0;
 	int			status = -1;
 	const s16		(*rsv_chans)[2];
 	const s16		(*rsv_slots)[2];
 	int			irq[EDMA_MAX_CC] = {0, 0};
 	int			err_irq[EDMA_MAX_CC] = {0, 0};
-	struct resource		*r[EDMA_MAX_CC] = {NULL};
+	struct resource		*r[EDMA_MAX_CC] = {NULL, NULL};
+	struct resource		res[EDMA_MAX_CC];
 	resource_size_t		len[EDMA_MAX_CC];
 	char			res_name[10];
 	char			irq_name[10];
+	struct device_node	*node = pdev->dev.of_node;
+	struct device		*dev = &pdev->dev;
+	int			ret;
+
+	if (node) {
+		/* Check if this is a second instance registered */
+		if (arch_num_cc) {
+			dev_err(dev, "only one EDMA instance is supported via DT\n");
+			return -ENODEV;
+		}
+		info = ninfo;
+		edma_of_parse_dt(dev, node, &tmpinfo);
+		info[0] = &tmpinfo;
+
+		dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
+		of_dma_controller_register(dev->of_node,
+					   of_dma_simple_xlate,
+					   &edma_filter_info);
+	}
 
 	if (!info)
 		return -ENODEV;
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		return ret;
+	}
+
 	for (j = 0; j < EDMA_MAX_CC; j++) {
-		sprintf(res_name, "edma_cc%d", j);
-		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+		if (!info[j]) {
+			if (!found)
+				return -ENODEV;
+			break;
+		}
+		if (node) {
+			ret = of_address_to_resource(node, j, &res[j]);
+			if (!ret)
+				r[j] = &res[j];
+		} else {
+			sprintf(res_name, "edma_cc%d", j);
+			r[j] = platform_get_resource_byname(pdev,
+						IORESOURCE_MEM,
 						res_name);
-		if (!r[j] || !info[j]) {
+		}
+		if (!r[j]) {
 			if (found)
 				break;
 			else
@@ -1468,8 +1617,13 @@ static int __init edma_probe(struct platform_device *pdev)
 			}
 		}
 
-		sprintf(irq_name, "edma%d", j);
-		irq[j] = platform_get_irq_byname(pdev, irq_name);
+
+		if (node)
+			irq[j] = irq_of_parse_and_map(node, 0);
+		else {
+			sprintf(irq_name, "edma%d", j);
+			irq[j] = platform_get_irq_byname(pdev, irq_name);
+		}
 		edma_cc[j]->irq_res_start = irq[j];
 		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
 					&pdev->dev);
@@ -1479,8 +1633,12 @@ static int __init edma_probe(struct platform_device *pdev)
 			goto fail;
 		}
 
-		sprintf(irq_name, "edma%d_err", j);
-		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+		if (node)
+			err_irq[j] = irq_of_parse_and_map(node, 2);
+		else {
+			sprintf(irq_name, "edma%d_err", j);
+			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+		}
 		edma_cc[j]->irq_res_end = err_irq[j];
 		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
 					"edma_error", &pdev->dev);
@@ -1541,9 +1699,17 @@ fail1:
 	return status;
 }
 
+static const struct of_device_id edma_of_ids[] = {
+	{ .compatible = "ti,edma3", },
+	{}
+};
 
 static struct platform_driver edma_driver = {
-	.driver.name	= "edma",
+	.driver = {
+		.name	= "edma",
+		.of_match_table = edma_of_ids,
+	},
+	.probe = edma_probe,
 };
 
 static int __init edma_init(void)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f49cd51..f91b07f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS
 	select PROC_DEVICETREE if PROC_FS
 	select SOC_BUS
 	select SPARSE_IRQ
+	select TI_PRIV_EDMA
 	select USE_OF
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index 2344ea2..317f2be 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -175,8 +175,8 @@ struct edma_soc_info {
 	/* Resource reservation for other cores */
 	struct edma_rsv_info	*rsv;
 
-	const s8	(*queue_tc_mapping)[2];
-	const s8	(*queue_priority_mapping)[2];
+	s8	(*queue_tc_mapping)[2];
+	s8	(*queue_priority_mapping)[2];
 };
 
 #endif
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: Joel A Fernandes <joelagnel-l0cyMroinI0@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
	Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>,
	Matt Porter <matt-agtwNxEcTQJWk0Htik3J/w@public.gmane.org>,
	Grant Likely
	<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
	Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
	Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
	Mark Brown
	<broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>,
	Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Rob Landley <rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org>,
	Andrew Morton
	<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
	Jason Kridner <jkridner-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org>,
	Koen Kooi <koen-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org>
Cc: Joel A Fernandes <joelagnel-l0cyMroinI0@public.gmane.org>,
	Linux DaVinci Kernel List
	<davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org>,
	Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
	Linux Documentation List
	<linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Devicetree Discuss
	<devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>,
	Linux MMC List
	<linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Linux Kernel Mailing List
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Linux SPI Devel List
	<spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
	Linux OMAP List
	<linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Linux ARM Kernel List
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: [PATCH v11 2/8] ARM: edma: Add DT and runtime PM support to the private EDMA API
Date: Tue, 18 Jun 2013 01:38:13 -0500	[thread overview]
Message-ID: <1371537499-12970-3-git-send-email-joelagnel@ti.com> (raw)
In-Reply-To: <1371537499-12970-1-git-send-email-joelagnel-l0cyMroinI0@public.gmane.org>

From: Matt Porter <mporter-l0cyMroinI0@public.gmane.org>

Adds support for parsing the TI EDMA DT data into the required EDMA
private API platform data. Enables runtime PM support to initialize
the EDMA hwmod. Enables build on OMAP.

Changes by Joel:
* Setup default one-to-one mapping for queue_priority and queue_tc
mapping as discussed in [1].
* Split out xbar stuff to separate patch. [1]

[1] https://patchwork.kernel.org/patch/2226761/

Signed-off-by: Matt Porter <mporter-l0cyMroinI0@public.gmane.org>
Acked-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
Signed-off-by: Joel A Fernandes <joelagnel-l0cyMroinI0@public.gmane.org>
---
 arch/arm/common/edma.c             |  190 +++++++++++++++++++++++++++++++++---
 arch/arm/mach-omap2/Kconfig        |    1 +
 include/linux/platform_data/edma.h |    4 +-
 3 files changed, 181 insertions(+), 14 deletions(-)

diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index a1db6cd..9823b79 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -24,6 +24,13 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/edma.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/of_irq.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/platform_data/edma.h>
 
@@ -1369,31 +1376,173 @@ void edma_clear_event(unsigned channel)
 EXPORT_SYMBOL(edma_clear_event);
 
 /*-----------------------------------------------------------------------*/
+static int edma_of_read_u32_to_s8_array(const struct device_node *np,
+					 const char *propname, s8 *out_values,
+					 size_t sz)
+{
+	int ret;
+
+	ret = of_property_read_u8_array(np, propname, out_values, sz);
+	if (ret)
+		return ret;
+
+	/* Terminate it */
+	*out_values++ = -1;
+	*out_values++ = -1;
+
+	return 0;
+}
+
+static int edma_of_read_u32_to_s16_array(const struct device_node *np,
+					 const char *propname, s16 *out_values,
+					 size_t sz)
+{
+	int ret;
+
+	ret = of_property_read_u16_array(np, propname, out_values, sz);
+	if (ret)
+		return ret;
+
+	/* Terminate it */
+	*out_values++ = -1;
+	*out_values++ = -1;
+
+	return 0;
+}
 
-static int __init edma_probe(struct platform_device *pdev)
+static int edma_of_parse_dt(struct device *dev,
+			    struct device_node *node,
+			    struct edma_soc_info *pdata)
+{
+	int ret = 0, i;
+	u32 value;
+	struct property *prop;
+	size_t sz;
+	struct edma_rsv_info *rsv_info;
+	const s16 (*rsv_chans)[2], (*rsv_slots)[2];
+	s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
+
+	memset(pdata, 0, sizeof(struct edma_soc_info));
+
+	ret = of_property_read_u32(node, "dma-channels", &value);
+	if (ret < 0)
+		return ret;
+	pdata->n_channel = value;
+
+	ret = of_property_read_u32(node, "ti,edma-regions", &value);
+	if (ret < 0)
+		return ret;
+	pdata->n_region = value;
+
+	ret = of_property_read_u32(node, "ti,edma-slots", &value);
+	if (ret < 0)
+		return ret;
+	pdata->n_slot = value;
+
+	pdata->n_cc = 1;
+	pdata->n_tc = 3;
+
+	rsv_info =
+		devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
+	if (!rsv_info)
+		return -ENOMEM;
+	pdata->rsv = rsv_info;
+
+	queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
+	if (!queue_tc_map)
+		return -ENOMEM;
+
+	for (i = 0; i < 3; i++)
+		queue_tc_map[i][0] = queue_tc_map[i][1] = i;
+	queue_tc_map[i][0] = queue_tc_map[i][1] = -1;
+
+	pdata->queue_tc_mapping = queue_tc_map;
+
+	queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
+	if (!queue_priority_map)
+		return -ENOMEM;
+
+	for (i = 0; i < 3; i++)
+		queue_priority_map[i][0] = queue_priority_map[i][1] = i;
+	queue_priority_map[i][0] = queue_priority_map[i][1] = -1;
+
+	pdata->queue_priority_mapping = queue_priority_map;
+
+	pdata->default_queue = 0;
+
+
+	return ret;
+}
+
+static struct of_dma_filter_info edma_filter_info = {
+	.filter_fn = edma_filter_fn,
+};
+
+static int edma_probe(struct platform_device *pdev)
 {
 	struct edma_soc_info	**info = pdev->dev.platform_data;
-	const s8		(*queue_priority_mapping)[2];
-	const s8		(*queue_tc_mapping)[2];
+	struct edma_soc_info	*ninfo[EDMA_MAX_CC] = {NULL, NULL};
+	struct edma_soc_info	tmpinfo;
+	s8		(*queue_priority_mapping)[2];
+	s8		(*queue_tc_mapping)[2];
 	int			i, j, off, ln, found = 0;
 	int			status = -1;
 	const s16		(*rsv_chans)[2];
 	const s16		(*rsv_slots)[2];
 	int			irq[EDMA_MAX_CC] = {0, 0};
 	int			err_irq[EDMA_MAX_CC] = {0, 0};
-	struct resource		*r[EDMA_MAX_CC] = {NULL};
+	struct resource		*r[EDMA_MAX_CC] = {NULL, NULL};
+	struct resource		res[EDMA_MAX_CC];
 	resource_size_t		len[EDMA_MAX_CC];
 	char			res_name[10];
 	char			irq_name[10];
+	struct device_node	*node = pdev->dev.of_node;
+	struct device		*dev = &pdev->dev;
+	int			ret;
+
+	if (node) {
+		/* Check if this is a second instance registered */
+		if (arch_num_cc) {
+			dev_err(dev, "only one EDMA instance is supported via DT\n");
+			return -ENODEV;
+		}
+		info = ninfo;
+		edma_of_parse_dt(dev, node, &tmpinfo);
+		info[0] = &tmpinfo;
+
+		dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
+		of_dma_controller_register(dev->of_node,
+					   of_dma_simple_xlate,
+					   &edma_filter_info);
+	}
 
 	if (!info)
 		return -ENODEV;
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		return ret;
+	}
+
 	for (j = 0; j < EDMA_MAX_CC; j++) {
-		sprintf(res_name, "edma_cc%d", j);
-		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+		if (!info[j]) {
+			if (!found)
+				return -ENODEV;
+			break;
+		}
+		if (node) {
+			ret = of_address_to_resource(node, j, &res[j]);
+			if (!ret)
+				r[j] = &res[j];
+		} else {
+			sprintf(res_name, "edma_cc%d", j);
+			r[j] = platform_get_resource_byname(pdev,
+						IORESOURCE_MEM,
 						res_name);
-		if (!r[j] || !info[j]) {
+		}
+		if (!r[j]) {
 			if (found)
 				break;
 			else
@@ -1468,8 +1617,13 @@ static int __init edma_probe(struct platform_device *pdev)
 			}
 		}
 
-		sprintf(irq_name, "edma%d", j);
-		irq[j] = platform_get_irq_byname(pdev, irq_name);
+
+		if (node)
+			irq[j] = irq_of_parse_and_map(node, 0);
+		else {
+			sprintf(irq_name, "edma%d", j);
+			irq[j] = platform_get_irq_byname(pdev, irq_name);
+		}
 		edma_cc[j]->irq_res_start = irq[j];
 		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
 					&pdev->dev);
@@ -1479,8 +1633,12 @@ static int __init edma_probe(struct platform_device *pdev)
 			goto fail;
 		}
 
-		sprintf(irq_name, "edma%d_err", j);
-		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+		if (node)
+			err_irq[j] = irq_of_parse_and_map(node, 2);
+		else {
+			sprintf(irq_name, "edma%d_err", j);
+			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+		}
 		edma_cc[j]->irq_res_end = err_irq[j];
 		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
 					"edma_error", &pdev->dev);
@@ -1541,9 +1699,17 @@ fail1:
 	return status;
 }
 
+static const struct of_device_id edma_of_ids[] = {
+	{ .compatible = "ti,edma3", },
+	{}
+};
 
 static struct platform_driver edma_driver = {
-	.driver.name	= "edma",
+	.driver = {
+		.name	= "edma",
+		.of_match_table = edma_of_ids,
+	},
+	.probe = edma_probe,
 };
 
 static int __init edma_init(void)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f49cd51..f91b07f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS
 	select PROC_DEVICETREE if PROC_FS
 	select SOC_BUS
 	select SPARSE_IRQ
+	select TI_PRIV_EDMA
 	select USE_OF
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index 2344ea2..317f2be 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -175,8 +175,8 @@ struct edma_soc_info {
 	/* Resource reservation for other cores */
 	struct edma_rsv_info	*rsv;
 
-	const s8	(*queue_tc_mapping)[2];
-	const s8	(*queue_priority_mapping)[2];
+	s8	(*queue_tc_mapping)[2];
+	s8	(*queue_priority_mapping)[2];
 };
 
 #endif
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: joelagnel@ti.com (Joel A Fernandes)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 2/8] ARM: edma: Add DT and runtime PM support to the private EDMA API
Date: Tue, 18 Jun 2013 01:38:13 -0500	[thread overview]
Message-ID: <1371537499-12970-3-git-send-email-joelagnel@ti.com> (raw)
In-Reply-To: <1371537499-12970-1-git-send-email-joelagnel@ti.com>

From: Matt Porter <mporter@ti.com>

Adds support for parsing the TI EDMA DT data into the required EDMA
private API platform data. Enables runtime PM support to initialize
the EDMA hwmod. Enables build on OMAP.

Changes by Joel:
* Setup default one-to-one mapping for queue_priority and queue_tc
mapping as discussed in [1].
* Split out xbar stuff to separate patch. [1]

[1] https://patchwork.kernel.org/patch/2226761/

Signed-off-by: Matt Porter <mporter@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
---
 arch/arm/common/edma.c             |  190 +++++++++++++++++++++++++++++++++---
 arch/arm/mach-omap2/Kconfig        |    1 +
 include/linux/platform_data/edma.h |    4 +-
 3 files changed, 181 insertions(+), 14 deletions(-)

diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index a1db6cd..9823b79 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -24,6 +24,13 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/edma.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/of_irq.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/platform_data/edma.h>
 
@@ -1369,31 +1376,173 @@ void edma_clear_event(unsigned channel)
 EXPORT_SYMBOL(edma_clear_event);
 
 /*-----------------------------------------------------------------------*/
+static int edma_of_read_u32_to_s8_array(const struct device_node *np,
+					 const char *propname, s8 *out_values,
+					 size_t sz)
+{
+	int ret;
+
+	ret = of_property_read_u8_array(np, propname, out_values, sz);
+	if (ret)
+		return ret;
+
+	/* Terminate it */
+	*out_values++ = -1;
+	*out_values++ = -1;
+
+	return 0;
+}
+
+static int edma_of_read_u32_to_s16_array(const struct device_node *np,
+					 const char *propname, s16 *out_values,
+					 size_t sz)
+{
+	int ret;
+
+	ret = of_property_read_u16_array(np, propname, out_values, sz);
+	if (ret)
+		return ret;
+
+	/* Terminate it */
+	*out_values++ = -1;
+	*out_values++ = -1;
+
+	return 0;
+}
 
-static int __init edma_probe(struct platform_device *pdev)
+static int edma_of_parse_dt(struct device *dev,
+			    struct device_node *node,
+			    struct edma_soc_info *pdata)
+{
+	int ret = 0, i;
+	u32 value;
+	struct property *prop;
+	size_t sz;
+	struct edma_rsv_info *rsv_info;
+	const s16 (*rsv_chans)[2], (*rsv_slots)[2];
+	s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
+
+	memset(pdata, 0, sizeof(struct edma_soc_info));
+
+	ret = of_property_read_u32(node, "dma-channels", &value);
+	if (ret < 0)
+		return ret;
+	pdata->n_channel = value;
+
+	ret = of_property_read_u32(node, "ti,edma-regions", &value);
+	if (ret < 0)
+		return ret;
+	pdata->n_region = value;
+
+	ret = of_property_read_u32(node, "ti,edma-slots", &value);
+	if (ret < 0)
+		return ret;
+	pdata->n_slot = value;
+
+	pdata->n_cc = 1;
+	pdata->n_tc = 3;
+
+	rsv_info =
+		devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
+	if (!rsv_info)
+		return -ENOMEM;
+	pdata->rsv = rsv_info;
+
+	queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
+	if (!queue_tc_map)
+		return -ENOMEM;
+
+	for (i = 0; i < 3; i++)
+		queue_tc_map[i][0] = queue_tc_map[i][1] = i;
+	queue_tc_map[i][0] = queue_tc_map[i][1] = -1;
+
+	pdata->queue_tc_mapping = queue_tc_map;
+
+	queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
+	if (!queue_priority_map)
+		return -ENOMEM;
+
+	for (i = 0; i < 3; i++)
+		queue_priority_map[i][0] = queue_priority_map[i][1] = i;
+	queue_priority_map[i][0] = queue_priority_map[i][1] = -1;
+
+	pdata->queue_priority_mapping = queue_priority_map;
+
+	pdata->default_queue = 0;
+
+
+	return ret;
+}
+
+static struct of_dma_filter_info edma_filter_info = {
+	.filter_fn = edma_filter_fn,
+};
+
+static int edma_probe(struct platform_device *pdev)
 {
 	struct edma_soc_info	**info = pdev->dev.platform_data;
-	const s8		(*queue_priority_mapping)[2];
-	const s8		(*queue_tc_mapping)[2];
+	struct edma_soc_info	*ninfo[EDMA_MAX_CC] = {NULL, NULL};
+	struct edma_soc_info	tmpinfo;
+	s8		(*queue_priority_mapping)[2];
+	s8		(*queue_tc_mapping)[2];
 	int			i, j, off, ln, found = 0;
 	int			status = -1;
 	const s16		(*rsv_chans)[2];
 	const s16		(*rsv_slots)[2];
 	int			irq[EDMA_MAX_CC] = {0, 0};
 	int			err_irq[EDMA_MAX_CC] = {0, 0};
-	struct resource		*r[EDMA_MAX_CC] = {NULL};
+	struct resource		*r[EDMA_MAX_CC] = {NULL, NULL};
+	struct resource		res[EDMA_MAX_CC];
 	resource_size_t		len[EDMA_MAX_CC];
 	char			res_name[10];
 	char			irq_name[10];
+	struct device_node	*node = pdev->dev.of_node;
+	struct device		*dev = &pdev->dev;
+	int			ret;
+
+	if (node) {
+		/* Check if this is a second instance registered */
+		if (arch_num_cc) {
+			dev_err(dev, "only one EDMA instance is supported via DT\n");
+			return -ENODEV;
+		}
+		info = ninfo;
+		edma_of_parse_dt(dev, node, &tmpinfo);
+		info[0] = &tmpinfo;
+
+		dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
+		of_dma_controller_register(dev->of_node,
+					   of_dma_simple_xlate,
+					   &edma_filter_info);
+	}
 
 	if (!info)
 		return -ENODEV;
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		return ret;
+	}
+
 	for (j = 0; j < EDMA_MAX_CC; j++) {
-		sprintf(res_name, "edma_cc%d", j);
-		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+		if (!info[j]) {
+			if (!found)
+				return -ENODEV;
+			break;
+		}
+		if (node) {
+			ret = of_address_to_resource(node, j, &res[j]);
+			if (!ret)
+				r[j] = &res[j];
+		} else {
+			sprintf(res_name, "edma_cc%d", j);
+			r[j] = platform_get_resource_byname(pdev,
+						IORESOURCE_MEM,
 						res_name);
-		if (!r[j] || !info[j]) {
+		}
+		if (!r[j]) {
 			if (found)
 				break;
 			else
@@ -1468,8 +1617,13 @@ static int __init edma_probe(struct platform_device *pdev)
 			}
 		}
 
-		sprintf(irq_name, "edma%d", j);
-		irq[j] = platform_get_irq_byname(pdev, irq_name);
+
+		if (node)
+			irq[j] = irq_of_parse_and_map(node, 0);
+		else {
+			sprintf(irq_name, "edma%d", j);
+			irq[j] = platform_get_irq_byname(pdev, irq_name);
+		}
 		edma_cc[j]->irq_res_start = irq[j];
 		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
 					&pdev->dev);
@@ -1479,8 +1633,12 @@ static int __init edma_probe(struct platform_device *pdev)
 			goto fail;
 		}
 
-		sprintf(irq_name, "edma%d_err", j);
-		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+		if (node)
+			err_irq[j] = irq_of_parse_and_map(node, 2);
+		else {
+			sprintf(irq_name, "edma%d_err", j);
+			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+		}
 		edma_cc[j]->irq_res_end = err_irq[j];
 		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
 					"edma_error", &pdev->dev);
@@ -1541,9 +1699,17 @@ fail1:
 	return status;
 }
 
+static const struct of_device_id edma_of_ids[] = {
+	{ .compatible = "ti,edma3", },
+	{}
+};
 
 static struct platform_driver edma_driver = {
-	.driver.name	= "edma",
+	.driver = {
+		.name	= "edma",
+		.of_match_table = edma_of_ids,
+	},
+	.probe = edma_probe,
 };
 
 static int __init edma_init(void)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f49cd51..f91b07f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS
 	select PROC_DEVICETREE if PROC_FS
 	select SOC_BUS
 	select SPARSE_IRQ
+	select TI_PRIV_EDMA
 	select USE_OF
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index 2344ea2..317f2be 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -175,8 +175,8 @@ struct edma_soc_info {
 	/* Resource reservation for other cores */
 	struct edma_rsv_info	*rsv;
 
-	const s8	(*queue_tc_mapping)[2];
-	const s8	(*queue_priority_mapping)[2];
+	s8	(*queue_tc_mapping)[2];
+	s8	(*queue_priority_mapping)[2];
 };
 
 #endif
-- 
1.7.9.5

  parent reply	other threads:[~2013-06-18  6:40 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-18  6:38 [PATCH v11 0/8] ] DMA Engine support for AM33XX Joel A Fernandes
2013-06-18  6:38 ` Joel A Fernandes
2013-06-18  6:38 ` Joel A Fernandes
2013-06-18  6:38 ` [PATCH v11 1/8] dmaengine: edma: Add TI EDMA device tree binding Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38 ` Joel A Fernandes [this message]
2013-06-18  6:38   ` [PATCH v11 2/8] ARM: edma: Add DT and runtime PM support to the private EDMA API Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  9:39   ` Sekhar Nori
2013-06-18  9:39     ` Sekhar Nori
2013-06-18  9:39     ` Sekhar Nori
2013-06-18  9:39     ` Sekhar Nori
2013-06-18  6:38 ` [PATCH v11 3/8] ARM: edma: Add EDMA crossbar event mux support Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18 10:19   ` Sekhar Nori
2013-06-18 10:19     ` Sekhar Nori
2013-06-18 10:19     ` Sekhar Nori
2013-06-18 10:19     ` Sekhar Nori
2013-06-20  0:36     ` Joel A Fernandes
2013-06-20  0:36       ` Joel A Fernandes
2013-06-20  0:36       ` Joel A Fernandes
2013-06-20  0:36       ` Joel A Fernandes
2013-06-20  4:49       ` Sekhar Nori
2013-06-20  4:49         ` Sekhar Nori
2013-06-20  4:49         ` Sekhar Nori
2013-06-20  4:49         ` Sekhar Nori
2013-06-18  6:38 ` [PATCH v11 4/8] ARM: dts: add AM33XX EDMA support Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38 ` [PATCH v11 5/8] ARM: dts: add AM33XX SPI DMA support Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38 ` [PATCH v11 6/8] dmaengine: edma: enable build for AM33XX Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38 ` [PATCH v11 7/8] spi: omap2-mcspi: add generic DMA request support to the DT binding Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38 ` [PATCH v11 8/8] spi: omap2-mcspi: convert to dma_request_slave_channel_compat() Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18  6:38   ` Joel A Fernandes
2013-06-18 13:07 ` [PATCH v11 0/8] ] DMA Engine support for AM33XX Arnd Bergmann
2013-06-18 13:07   ` Arnd Bergmann
2013-06-18 13:07   ` Arnd Bergmann
2013-06-18 13:07   ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371537499-12970-3-git-send-email-joelagnel@ti.com \
    --to=joelagnel@ti.com \
    --cc=akpm@linux-foundation.org \
    --cc=arnd@arndb.de \
    --cc=b-cousson@ti.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=jkridner@beagleboard.org \
    --cc=koen@beagleboard.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=matt@ohporter.com \
    --cc=nsekhar@ti.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=spi-devel-general@lists.sourceforge.net \
    --cc=tony@atomide.com \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.