From: Sylwester Nawrocki <s.nawrocki@samsung.com>
To: kgene.kim@samsung.com
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, kyungmin.park@samsung.com,
myungjoo.ham@samsung.com, m.szyprowski@samsung.com,
phil.carmody@partner.samsung.com, j.anaszewski@samsung.com,
devicetree-discuss@lists.ozlabs.org,
Sylwester Nawrocki <s.nawrocki@samsung.com>
Subject: [PATCH 5/8] ARM: dts: Add camera nodes for Exynos4 SoCs
Date: Fri, 21 Jun 2013 14:50:21 +0200 [thread overview]
Message-ID: <1371819024-12596-6-git-send-email-s.nawrocki@samsung.com> (raw)
In-Reply-To: <1371819024-12596-1-git-send-email-s.nawrocki@samsung.com>
This patch adds common FIMC and MIPI CSIS device nodes for Exynos4 SoCs.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com
---
arch/arm/boot/dts/exynos4.dtsi | 68 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index bce2254..4d61120 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -36,6 +36,12 @@
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
+ csis0 = &csis_0;
+ csis1 = &csis_1;
+ fimc0 = &fimc_0;
+ fimc1 = &fimc_1;
+ fimc2 = &fimc_2;
+ fimc3 = &fimc_3;
};
chipid@10000000 {
@@ -92,6 +98,68 @@
reg = <0x10010000 0x400>;
};
+ camera {
+ compatible = "samsung,fimc", "simple-bus";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ fimc_0: fimc@11800000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11800000 0x1000>;
+ interrupts = <0 84 0>;
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ fimc_1: fimc@11810000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11810000 0x1000>;
+ interrupts = <0 85 0>;
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ fimc_2: fimc@11820000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11820000 0x1000>;
+ interrupts = <0 86 0>;
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ fimc_3: fimc@11830000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11830000 0x1000>;
+ interrupts = <0 87 0>;
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ csis_0: csis@11880000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11880000 0x4000>;
+ interrupts = <0 78 0>;
+ bus-width = <4>;
+ samsung,power-domain = <&pd_cam>;
+ status = "disabled";
+ };
+
+ csis_1: csis@11890000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11890000 0x4000>;
+ interrupts = <0 80 0>;
+ bus-width = <2>;
+ samsung,power-domain = <&pd_cam>;
+ status = "disabled";
+ };
+ };
+
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: s.nawrocki@samsung.com (Sylwester Nawrocki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/8] ARM: dts: Add camera nodes for Exynos4 SoCs
Date: Fri, 21 Jun 2013 14:50:21 +0200 [thread overview]
Message-ID: <1371819024-12596-6-git-send-email-s.nawrocki@samsung.com> (raw)
In-Reply-To: <1371819024-12596-1-git-send-email-s.nawrocki@samsung.com>
This patch adds common FIMC and MIPI CSIS device nodes for Exynos4 SoCs.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com
---
arch/arm/boot/dts/exynos4.dtsi | 68 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index bce2254..4d61120 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -36,6 +36,12 @@
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
+ csis0 = &csis_0;
+ csis1 = &csis_1;
+ fimc0 = &fimc_0;
+ fimc1 = &fimc_1;
+ fimc2 = &fimc_2;
+ fimc3 = &fimc_3;
};
chipid@10000000 {
@@ -92,6 +98,68 @@
reg = <0x10010000 0x400>;
};
+ camera {
+ compatible = "samsung,fimc", "simple-bus";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ fimc_0: fimc at 11800000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11800000 0x1000>;
+ interrupts = <0 84 0>;
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ fimc_1: fimc at 11810000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11810000 0x1000>;
+ interrupts = <0 85 0>;
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ fimc_2: fimc at 11820000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11820000 0x1000>;
+ interrupts = <0 86 0>;
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ fimc_3: fimc at 11830000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11830000 0x1000>;
+ interrupts = <0 87 0>;
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ csis_0: csis at 11880000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11880000 0x4000>;
+ interrupts = <0 78 0>;
+ bus-width = <4>;
+ samsung,power-domain = <&pd_cam>;
+ status = "disabled";
+ };
+
+ csis_1: csis at 11890000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11890000 0x4000>;
+ interrupts = <0 80 0>;
+ bus-width = <2>;
+ samsung,power-domain = <&pd_cam>;
+ status = "disabled";
+ };
+ };
+
watchdog at 10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
--
1.7.9.5
next prev parent reply other threads:[~2013-06-21 12:50 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-21 12:50 [PATCH 0/8] ARM: dts: Add camera and barometer sensor support for TRATS2 board Sylwester Nawrocki
2013-06-21 12:50 ` Sylwester Nawrocki
2013-06-21 12:50 ` [PATCH 1/8] ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs Sylwester Nawrocki
2013-06-21 12:50 ` Sylwester Nawrocki
2013-06-23 10:12 ` Tomasz Figa
2013-06-23 10:12 ` Tomasz Figa
2013-06-24 12:29 ` Sylwester Nawrocki
2013-06-24 12:29 ` Sylwester Nawrocki
2013-06-21 12:50 ` [PATCH 2/8] ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals Sylwester Nawrocki
2013-06-21 12:50 ` Sylwester Nawrocki
2013-06-21 12:50 ` [PATCH 3/8] ARM: dts: Add ISP power domain node for Exynos4x12 Sylwester Nawrocki
2013-06-21 12:50 ` Sylwester Nawrocki
2013-06-21 12:50 ` [PATCH 4/8] ARM: dts: Use generic DMA bindings for Exynos4 SPI devices Sylwester Nawrocki
2013-06-21 12:50 ` Sylwester Nawrocki
2013-06-21 12:50 ` Sylwester Nawrocki [this message]
2013-06-21 12:50 ` [PATCH 5/8] ARM: dts: Add camera nodes for Exynos4 SoCs Sylwester Nawrocki
2013-06-21 12:50 ` [PATCH 6/8] ARM: dts: Add camera subsystem nodes to exynos4x12.dtsi Sylwester Nawrocki
2013-06-21 12:50 ` Sylwester Nawrocki
2013-06-21 12:50 ` [PATCH 7/8] ARM: dts: Add AK8975 device node for Exynos4412 TRATS2 board Sylwester Nawrocki
2013-06-21 12:50 ` Sylwester Nawrocki
2013-06-21 12:50 ` [PATCH 8/8] ARM: dts: Add camera device nodes " Sylwester Nawrocki
2013-06-21 12:50 ` Sylwester Nawrocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371819024-12596-6-git-send-email-s.nawrocki@samsung.com \
--to=s.nawrocki@samsung.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=j.anaszewski@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=myungjoo.ham@samsung.com \
--cc=phil.carmody@partner.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.