From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>, Alessandro Rubini <rubini@unipv.it>, Linus Walleij <linus.walleij@linaro.org>, STEricsson <STEricsson_nomadik_linux@list.st.com>, Mike Turquette <mturquette@linaro.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 02/26] clk: nomadik: move src init out of nomadik_clk_init Date: Sun, 22 Sep 2013 18:45:32 +0200 [thread overview] Message-ID: <1379868332-2808-1-git-send-email-sebastian.hesselbarth@gmail.com> (raw) In-Reply-To: <1379526839-14798-3-git-send-email-sebastian.hesselbarth@gmail.com> nomadik_clk_init currently also maps system reset controller base address used by clocks and registers a reboot notifier. To allow further cleanup of nomadik clk setup, this moves system reset controller setup from nomadik_clk_init to its own function. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> --- Changelog: v1->v2: - adapt to clk-nomadik changes Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- drivers/clk/clk-nomadik.c | 144 +++++++++++++++++++++++---------------------- 1 file changed, 74 insertions(+), 70 deletions(-) diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 4d978a3..06b29c26 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -62,6 +62,79 @@ static DEFINE_SPINLOCK(src_lock); /* Base address of the SRC */ static void __iomem *src_base; +static int nomadik_clk_reboot_handler(struct notifier_block *this, + unsigned long code, + void *unused) +{ + u32 val; + + /* The main chrystal need to be enabled for reboot to work */ + val = readl(src_base + SRC_XTALCR); + val &= ~SRC_XTALCR_MXTALOVER; + val |= SRC_XTALCR_MXTALEN; + pr_crit("force-enabling MXTALO\n"); + writel(val, src_base + SRC_XTALCR); + return NOTIFY_OK; +} + +static struct notifier_block nomadik_clk_reboot_notifier = { + .notifier_call = nomadik_clk_reboot_handler, +}; + +static const struct of_device_id nomadik_src_match[] __initconst = { + { .compatible = "stericsson,nomadik-src" }, + { /* sentinel */ } +}; + +static void nomadik_src_init(void) +{ + struct device_node *np; + u32 val; + + np = of_find_matching_node(NULL, nomadik_src_match); + if (!np) { + pr_crit("no matching node for SRC, aborting clock init\n"); + return; + } + src_base = of_iomap(np, 0); + if (!src_base) { + pr_err("%s: must have src parent node with REGS (%s)\n", + __func__, np->name); + return; + } + + /* Set all timers to use the 2.4 MHz TIMCLK */ + val = readl(src_base + SRC_CR); + val |= SRC_CR_T0_ENSEL; + val |= SRC_CR_T1_ENSEL; + val |= SRC_CR_T2_ENSEL; + val |= SRC_CR_T3_ENSEL; + val |= SRC_CR_T4_ENSEL; + val |= SRC_CR_T5_ENSEL; + val |= SRC_CR_T6_ENSEL; + val |= SRC_CR_T7_ENSEL; + writel(val, src_base + SRC_CR); + + val = readl(src_base + SRC_XTALCR); + pr_info("SXTALO is %s\n", + (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); + pr_info("MXTAL is %s\n", + (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled"); + if (of_property_read_bool(np, "disable-sxtalo")) { + /* The machine uses an external oscillator circuit */ + val |= SRC_XTALCR_SXTALDIS; + pr_info("disabling SXTALO\n"); + } + if (of_property_read_bool(np, "disable-mxtalo")) { + /* Disable this too: also run by external oscillator */ + val |= SRC_XTALCR_MXTALOVER; + val &= ~SRC_XTALCR_MXTALEN; + pr_info("disabling MXTALO\n"); + } + writel(val, src_base + SRC_XTALCR); + register_reboot_notifier(&nomadik_clk_reboot_notifier); +} + /** * struct clk_pll1 - Nomadik PLL1 clock * @hw: corresponding clock hardware entry @@ -487,11 +560,6 @@ static void __init of_nomadik_src_clk_setup(struct device_node *np) of_clk_add_provider(np, of_clk_src_simple_get, clk); } -static const struct of_device_id nomadik_src_match[] __initconst = { - { .compatible = "stericsson,nomadik-src" }, - { /* sentinel */ } -}; - static const struct of_device_id nomadik_src_clk_match[] __initconst = { { .compatible = "fixed-clock", @@ -516,72 +584,8 @@ static const struct of_device_id nomadik_src_clk_match[] __initconst = { { /* sentinel */ } }; -static int nomadik_clk_reboot_handler(struct notifier_block *this, - unsigned long code, - void *unused) -{ - u32 val; - - /* The main chrystal need to be enabled for reboot to work */ - val = readl(src_base + SRC_XTALCR); - val &= ~SRC_XTALCR_MXTALOVER; - val |= SRC_XTALCR_MXTALEN; - pr_crit("force-enabling MXTALO\n"); - writel(val, src_base + SRC_XTALCR); - return NOTIFY_OK; -} - -static struct notifier_block nomadik_clk_reboot_notifier = { - .notifier_call = nomadik_clk_reboot_handler, -}; - void __init nomadik_clk_init(void) { - struct device_node *np; - u32 val; - - np = of_find_matching_node(NULL, nomadik_src_match); - if (!np) { - pr_crit("no matching node for SRC, aborting clock init\n"); - return; - } - src_base = of_iomap(np, 0); - if (!src_base) { - pr_err("%s: must have src parent node with REGS (%s)\n", - __func__, np->name); - return; - } - - /* Set all timers to use the 2.4 MHz TIMCLK */ - val = readl(src_base + SRC_CR); - val |= SRC_CR_T0_ENSEL; - val |= SRC_CR_T1_ENSEL; - val |= SRC_CR_T2_ENSEL; - val |= SRC_CR_T3_ENSEL; - val |= SRC_CR_T4_ENSEL; - val |= SRC_CR_T5_ENSEL; - val |= SRC_CR_T6_ENSEL; - val |= SRC_CR_T7_ENSEL; - writel(val, src_base + SRC_CR); - - val = readl(src_base + SRC_XTALCR); - pr_info("SXTALO is %s\n", - (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); - pr_info("MXTAL is %s\n", - (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled"); - if (of_property_read_bool(np, "disable-sxtalo")) { - /* The machine uses an external oscillator circuit */ - val |= SRC_XTALCR_SXTALDIS; - pr_info("disabling SXTALO\n"); - } - if (of_property_read_bool(np, "disable-mxtalo")) { - /* Disable this too: also run by external oscillator */ - val |= SRC_XTALCR_MXTALOVER; - val &= ~SRC_XTALCR_MXTALEN; - pr_info("disabling MXTALO\n"); - } - writel(val, src_base + SRC_XTALCR); - register_reboot_notifier(&nomadik_clk_reboot_notifier); - + nomadik_src_init(); of_clk_init(nomadik_src_clk_match); } -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 02/26] clk: nomadik: move src init out of nomadik_clk_init Date: Sun, 22 Sep 2013 18:45:32 +0200 [thread overview] Message-ID: <1379868332-2808-1-git-send-email-sebastian.hesselbarth@gmail.com> (raw) In-Reply-To: <1379526839-14798-3-git-send-email-sebastian.hesselbarth@gmail.com> nomadik_clk_init currently also maps system reset controller base address used by clocks and registers a reboot notifier. To allow further cleanup of nomadik clk setup, this moves system reset controller setup from nomadik_clk_init to its own function. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> --- Changelog: v1->v2: - adapt to clk-nomadik changes Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel at lists.infradead.org Cc: linux-kernel at vger.kernel.org --- drivers/clk/clk-nomadik.c | 144 +++++++++++++++++++++++---------------------- 1 file changed, 74 insertions(+), 70 deletions(-) diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 4d978a3..06b29c26 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -62,6 +62,79 @@ static DEFINE_SPINLOCK(src_lock); /* Base address of the SRC */ static void __iomem *src_base; +static int nomadik_clk_reboot_handler(struct notifier_block *this, + unsigned long code, + void *unused) +{ + u32 val; + + /* The main chrystal need to be enabled for reboot to work */ + val = readl(src_base + SRC_XTALCR); + val &= ~SRC_XTALCR_MXTALOVER; + val |= SRC_XTALCR_MXTALEN; + pr_crit("force-enabling MXTALO\n"); + writel(val, src_base + SRC_XTALCR); + return NOTIFY_OK; +} + +static struct notifier_block nomadik_clk_reboot_notifier = { + .notifier_call = nomadik_clk_reboot_handler, +}; + +static const struct of_device_id nomadik_src_match[] __initconst = { + { .compatible = "stericsson,nomadik-src" }, + { /* sentinel */ } +}; + +static void nomadik_src_init(void) +{ + struct device_node *np; + u32 val; + + np = of_find_matching_node(NULL, nomadik_src_match); + if (!np) { + pr_crit("no matching node for SRC, aborting clock init\n"); + return; + } + src_base = of_iomap(np, 0); + if (!src_base) { + pr_err("%s: must have src parent node with REGS (%s)\n", + __func__, np->name); + return; + } + + /* Set all timers to use the 2.4 MHz TIMCLK */ + val = readl(src_base + SRC_CR); + val |= SRC_CR_T0_ENSEL; + val |= SRC_CR_T1_ENSEL; + val |= SRC_CR_T2_ENSEL; + val |= SRC_CR_T3_ENSEL; + val |= SRC_CR_T4_ENSEL; + val |= SRC_CR_T5_ENSEL; + val |= SRC_CR_T6_ENSEL; + val |= SRC_CR_T7_ENSEL; + writel(val, src_base + SRC_CR); + + val = readl(src_base + SRC_XTALCR); + pr_info("SXTALO is %s\n", + (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); + pr_info("MXTAL is %s\n", + (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled"); + if (of_property_read_bool(np, "disable-sxtalo")) { + /* The machine uses an external oscillator circuit */ + val |= SRC_XTALCR_SXTALDIS; + pr_info("disabling SXTALO\n"); + } + if (of_property_read_bool(np, "disable-mxtalo")) { + /* Disable this too: also run by external oscillator */ + val |= SRC_XTALCR_MXTALOVER; + val &= ~SRC_XTALCR_MXTALEN; + pr_info("disabling MXTALO\n"); + } + writel(val, src_base + SRC_XTALCR); + register_reboot_notifier(&nomadik_clk_reboot_notifier); +} + /** * struct clk_pll1 - Nomadik PLL1 clock * @hw: corresponding clock hardware entry @@ -487,11 +560,6 @@ static void __init of_nomadik_src_clk_setup(struct device_node *np) of_clk_add_provider(np, of_clk_src_simple_get, clk); } -static const struct of_device_id nomadik_src_match[] __initconst = { - { .compatible = "stericsson,nomadik-src" }, - { /* sentinel */ } -}; - static const struct of_device_id nomadik_src_clk_match[] __initconst = { { .compatible = "fixed-clock", @@ -516,72 +584,8 @@ static const struct of_device_id nomadik_src_clk_match[] __initconst = { { /* sentinel */ } }; -static int nomadik_clk_reboot_handler(struct notifier_block *this, - unsigned long code, - void *unused) -{ - u32 val; - - /* The main chrystal need to be enabled for reboot to work */ - val = readl(src_base + SRC_XTALCR); - val &= ~SRC_XTALCR_MXTALOVER; - val |= SRC_XTALCR_MXTALEN; - pr_crit("force-enabling MXTALO\n"); - writel(val, src_base + SRC_XTALCR); - return NOTIFY_OK; -} - -static struct notifier_block nomadik_clk_reboot_notifier = { - .notifier_call = nomadik_clk_reboot_handler, -}; - void __init nomadik_clk_init(void) { - struct device_node *np; - u32 val; - - np = of_find_matching_node(NULL, nomadik_src_match); - if (!np) { - pr_crit("no matching node for SRC, aborting clock init\n"); - return; - } - src_base = of_iomap(np, 0); - if (!src_base) { - pr_err("%s: must have src parent node with REGS (%s)\n", - __func__, np->name); - return; - } - - /* Set all timers to use the 2.4 MHz TIMCLK */ - val = readl(src_base + SRC_CR); - val |= SRC_CR_T0_ENSEL; - val |= SRC_CR_T1_ENSEL; - val |= SRC_CR_T2_ENSEL; - val |= SRC_CR_T3_ENSEL; - val |= SRC_CR_T4_ENSEL; - val |= SRC_CR_T5_ENSEL; - val |= SRC_CR_T6_ENSEL; - val |= SRC_CR_T7_ENSEL; - writel(val, src_base + SRC_CR); - - val = readl(src_base + SRC_XTALCR); - pr_info("SXTALO is %s\n", - (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); - pr_info("MXTAL is %s\n", - (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled"); - if (of_property_read_bool(np, "disable-sxtalo")) { - /* The machine uses an external oscillator circuit */ - val |= SRC_XTALCR_SXTALDIS; - pr_info("disabling SXTALO\n"); - } - if (of_property_read_bool(np, "disable-mxtalo")) { - /* Disable this too: also run by external oscillator */ - val |= SRC_XTALCR_MXTALOVER; - val &= ~SRC_XTALCR_MXTALEN; - pr_info("disabling MXTALO\n"); - } - writel(val, src_base + SRC_XTALCR); - register_reboot_notifier(&nomadik_clk_reboot_notifier); - + nomadik_src_init(); of_clk_init(nomadik_src_clk_match); } -- 1.7.10.4
next prev parent reply other threads:[~2013-09-22 16:46 UTC|newest] Thread overview: 178+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-09-18 17:53 [PATCH 00/26] ARM: provide common arch init for DT clocks Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 01/26] ARM: nomadik: move mtu setup to clocksource init Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-20 20:49 ` Linus Walleij 2013-09-20 20:49 ` Linus Walleij 2013-09-20 20:51 ` Linus Walleij 2013-09-20 20:51 ` Linus Walleij 2013-09-20 21:08 ` Sebastian Hesselbarth 2013-09-20 21:08 ` Sebastian Hesselbarth 2013-09-20 21:11 ` Linus Walleij 2013-09-20 21:11 ` Linus Walleij 2013-09-20 21:13 ` Sebastian Hesselbarth 2013-09-20 21:13 ` Sebastian Hesselbarth 2013-09-20 21:22 ` Linus Walleij 2013-09-20 21:22 ` Linus Walleij 2013-09-22 12:18 ` Sebastian Hesselbarth 2013-09-22 12:18 ` Sebastian Hesselbarth 2013-09-20 21:37 ` [PATCH v2 01/26] ARM: nomadik: remove mtu initalization from .init_time Sebastian Hesselbarth 2013-09-20 21:37 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 02/26] clk: nomadik: move src init out of nomadik_clk_init Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-20 20:54 ` Linus Walleij 2013-09-20 20:54 ` Linus Walleij 2013-09-22 16:45 ` Sebastian Hesselbarth [this message] 2013-09-22 16:45 ` [PATCH v2 " Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 03/26] clk: nomadik: declare OF clock provider Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-20 20:55 ` Linus Walleij 2013-09-20 20:55 ` Linus Walleij 2013-09-22 16:46 ` [PATCH v2 " Sebastian Hesselbarth 2013-09-22 16:46 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 04/26] clk: prima2: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-19 8:45 ` Barry Song 2013-09-19 8:45 ` Barry Song 2013-09-19 8:48 ` Sebastian Hesselbarth 2013-09-19 8:48 ` Sebastian Hesselbarth 2013-09-22 12:12 ` Sebastian Hesselbarth 2013-09-22 12:12 ` Sebastian Hesselbarth 2013-09-22 10:37 ` Barry Song 2013-09-22 10:37 ` Barry Song 2013-09-27 18:21 ` Sebastian Hesselbarth 2013-09-27 18:21 ` Sebastian Hesselbarth 2013-09-29 4:49 ` Barry Song 2013-09-29 4:49 ` Barry Song 2013-09-18 17:53 ` [PATCH 05/26] ARM: socfgpa: prepare for arch-wide .init_time callback Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-26 6:12 ` Sebastian Hesselbarth 2013-09-26 6:12 ` Sebastian Hesselbarth 2013-09-26 13:06 ` Dinh Nguyen 2013-09-26 13:06 ` Dinh Nguyen 2013-09-18 17:53 ` [PATCH 06/26] clk: sunxi: declare OF clock provider Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-25 20:03 ` Maxime Ripard 2013-09-25 20:03 ` Maxime Ripard 2013-09-18 17:53 ` [PATCH 07/26] clk: vt8500: parse pmc_base from clock driver Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-19 19:02 ` Tony Prisk 2013-09-19 19:02 ` Tony Prisk 2013-09-19 19:12 ` Sebastian Hesselbarth 2013-09-19 19:12 ` Sebastian Hesselbarth 2013-09-20 4:51 ` Tony Prisk 2013-09-20 4:51 ` Tony Prisk 2013-09-20 6:23 ` Sebastian Hesselbarth 2013-09-20 6:23 ` Sebastian Hesselbarth 2013-09-20 18:23 ` Tony Prisk 2013-09-20 18:23 ` Tony Prisk 2013-09-20 6:22 ` [PATCH v2 " Sebastian Hesselbarth 2013-09-20 6:22 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 08/26] ARM: vt8500: prepare for arch-wide .init_time callback Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 09/26] ARM: call of_clk_init from default time_init handler Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth [not found] ` <1379526839-14798-10-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2013-09-23 7:54 ` [PATCH v2 " Sebastian Hesselbarth 2013-09-23 7:54 ` Sebastian Hesselbarth 2013-09-23 7:54 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 10/26] ARM: bcm2835: remove custom .init_time hook Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 19:37 ` Stephen Warren 2013-09-18 19:37 ` Stephen Warren 2013-09-18 17:53 ` [PATCH 11/26] ARM: dove: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-21 12:22 ` Andrew Lunn 2013-09-21 12:22 ` Andrew Lunn 2013-09-22 12:20 ` Sebastian Hesselbarth 2013-09-22 12:20 ` Sebastian Hesselbarth 2013-09-23 9:10 ` Andrew Lunn 2013-09-23 9:10 ` Andrew Lunn 2013-09-23 13:32 ` Jason Cooper 2013-09-23 13:32 ` Jason Cooper 2013-09-23 17:46 ` Sebastian Hesselbarth 2013-09-23 17:46 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 12/26] ARM: exynos: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-26 6:21 ` Sebastian Hesselbarth 2013-09-26 6:21 ` Sebastian Hesselbarth 2013-09-26 6:21 ` Sebastian Hesselbarth 2013-09-26 8:08 ` Tomasz Figa 2013-09-26 8:08 ` Tomasz Figa 2013-09-18 17:53 ` [PATCH 13/26] ARM: highbank: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 14/26] ARM: imx: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 15/26] ARM: kirkwood: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-21 20:27 ` Andrew Lunn 2013-09-21 20:27 ` Andrew Lunn 2013-09-23 13:32 ` Jason Cooper 2013-09-23 13:32 ` Jason Cooper 2013-09-18 17:53 ` [PATCH 16/26] ARM: mxs: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-20 8:57 ` Shawn Guo 2013-09-20 8:57 ` Shawn Guo 2013-09-18 17:53 ` [PATCH 17/26] ARM: nomadik: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-20 20:56 ` Linus Walleij 2013-09-20 20:56 ` Linus Walleij 2013-09-18 17:53 ` [PATCH 18/26] ARM: nspire: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 19/26] ARM: prima2: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 20/26] ARM: rockchip: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-19 8:40 ` Heiko Stübner 2013-09-19 8:40 ` Heiko Stübner 2013-09-18 17:53 ` [PATCH 21/26] ARM: socfpga: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-26 13:07 ` Dinh Nguyen 2013-09-26 13:07 ` Dinh Nguyen 2013-09-18 17:53 ` [PATCH 22/26] ARM: sti: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 23/26] ARM: sunxi: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-25 20:07 ` Maxime Ripard 2013-09-25 20:07 ` Maxime Ripard 2013-09-26 6:15 ` Sebastian Hesselbarth 2013-09-26 6:15 ` Sebastian Hesselbarth 2013-09-27 17:02 ` Maxime Ripard 2013-09-27 17:02 ` Maxime Ripard [not found] ` <1379526839-14798-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2013-09-18 17:53 ` [PATCH 24/26] ARM: tegra: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth [not found] ` <1379526839-14798-25-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2013-09-18 19:38 ` Stephen Warren 2013-09-18 19:38 ` Stephen Warren 2013-09-18 19:38 ` Stephen Warren 2013-09-18 19:47 ` [PATCH 00/26] ARM: provide common arch init for DT clocks Jason Cooper 2013-09-18 19:47 ` Jason Cooper 2013-09-18 19:47 ` Jason Cooper [not found] ` <20130918194711.GR19937-u4khhh1J0LxI1Ri9qeTfzeTW4wlIGRCZ@public.gmane.org> 2013-09-18 19:52 ` Sebastian Hesselbarth 2013-09-18 19:52 ` Sebastian Hesselbarth 2013-09-18 19:52 ` Sebastian Hesselbarth 2013-09-18 20:45 ` Stephen Warren 2013-09-18 20:45 ` Stephen Warren 2013-09-18 20:48 ` Olof Johansson 2013-09-18 20:48 ` Olof Johansson 2013-09-18 20:48 ` Olof Johansson 2013-09-18 21:04 ` Sebastian Hesselbarth 2013-09-18 21:04 ` Sebastian Hesselbarth 2013-09-18 21:04 ` Sebastian Hesselbarth 2013-09-18 17:53 ` [PATCH 25/26] ARM: vexpress: remove custom .init_time hook Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-19 13:34 ` Pawel Moll 2013-09-19 13:34 ` Pawel Moll 2013-09-18 17:53 ` [PATCH 26/26] ARM: vt8500: " Sebastian Hesselbarth 2013-09-18 17:53 ` Sebastian Hesselbarth 2013-09-20 19:16 ` [PATCH 00/26] ARM: provide common arch init for DT clocks Matt Porter 2013-09-20 19:16 ` Matt Porter 2013-09-20 19:16 ` Matt Porter 2013-09-22 12:14 ` Sebastian Hesselbarth 2013-09-22 12:14 ` Sebastian Hesselbarth [not found] ` <523EDF16.10102-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2013-09-23 17:45 ` Matt Porter 2013-09-23 17:45 ` Matt Porter 2013-09-23 17:45 ` Matt Porter [not found] ` <52407E2A.7030001-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2013-09-23 18:41 ` Christian Daudt 2013-09-23 18:41 ` Christian Daudt 2013-09-23 18:41 ` Christian Daudt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1379868332-2808-1-git-send-email-sebastian.hesselbarth@gmail.com \ --to=sebastian.hesselbarth@gmail.com \ --cc=STEricsson_nomadik_linux@list.st.com \ --cc=arnd@arndb.de \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mturquette@linaro.org \ --cc=olof@lixom.net \ --cc=rubini@unipv.it \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.