[PATCH v3 16/32] drm/exynos: Disable unused crtc planes from crtc

From: Sean Paul <seanpaul@chromium.org>
To: dri-devel@lists.freedesktop.org, inki.dae@samsung.com
Cc: marcheu@chromium.org
Subject: [PATCH v3 16/32] drm/exynos: Disable unused crtc planes from crtc
Date: Tue, 29 Oct 2013 12:13:02 -0400	[thread overview]
Message-ID: <1383063198-10526-17-git-send-email-seanpaul@chromium.org> (raw)
In-Reply-To: <1383063198-10526-1-git-send-email-seanpaul@chromium.org>

This patch moves the code which disables unused crtc planes from the
encoder to the crtc. Since there is a 1:1 encoder/crtc mapping in
exynos, the only valid crtc change the pre-existing code could catch is
disconnecting an active crtc from the encoder. Thus it is functionally
equivalent to just disable all planes attached to a crtc when the crtc
is disabled.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---

Changes in v2: None
Changes in v3: None

 drivers/gpu/drm/exynos/exynos_drm_crtc.c    | 13 +++++-
 drivers/gpu/drm/exynos/exynos_drm_encoder.c | 65 ++---------------------------
 2 files changed, 15 insertions(+), 63 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
index 347d62d..d019385 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@@ -176,10 +176,19 @@ static int exynos_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
 
 static void exynos_drm_crtc_disable(struct drm_crtc *crtc)
 {
-	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
+	struct drm_plane *plane;
+	int ret;
 
-	exynos_plane_dpms(exynos_crtc->plane, DRM_MODE_DPMS_OFF);
 	exynos_drm_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+
+	list_for_each_entry(plane, &crtc->dev->mode_config.plane_list, head) {
+		if (plane->crtc != crtc)
+			continue;
+
+		ret = plane->funcs->disable_plane(plane);
+		if (ret)
+			DRM_ERROR("Failed to disable plane %d\n", ret);
+	}
 }
 
 static struct drm_crtc_helper_funcs exynos_crtc_helper_funcs = {
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
index d4ae664..bfa2f17 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
@@ -29,7 +29,6 @@
  * @display: the display structure that maps to this encoder
  */
 struct exynos_drm_encoder {
-	struct drm_crtc			*old_crtc;
 	struct drm_encoder		drm_encoder;
 	struct exynos_drm_display	*display;
 };
@@ -67,71 +66,15 @@ exynos_drm_encoder_mode_fixup(struct drm_encoder *encoder,
 	return true;
 }
 
-static void disable_plane_to_crtc(struct drm_device *dev,
-						struct drm_crtc *old_crtc,
-						struct drm_crtc *new_crtc)
-{
-	struct drm_plane *plane;
-
-	/*
-	 * if old_crtc isn't same as encoder->crtc then it means that
-	 * user changed crtc id to another one so the plane to old_crtc
-	 * should be disabled and plane->crtc should be set to new_crtc
-	 * (encoder->crtc)
-	 */
-	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
-		if (plane->crtc == old_crtc) {
-			/*
-			 * do not change below call order.
-			 *
-			 * plane->funcs->disable_plane call checks
-			 * if encoder->crtc is same as plane->crtc and if same
-			 * then manager_ops->win_disable callback will be called
-			 * to diasble current hw overlay so plane->crtc should
-			 * have new_crtc because new_crtc was set to
-			 * encoder->crtc in advance.
-			 */
-			plane->crtc = new_crtc;
-			plane->funcs->disable_plane(plane);
-		}
-	}
-}
-
 static void exynos_drm_encoder_mode_set(struct drm_encoder *encoder,
 					 struct drm_display_mode *mode,
 					 struct drm_display_mode *adjusted_mode)
 {
-	struct drm_device *dev = encoder->dev;
-	struct drm_connector *connector;
-	struct exynos_drm_display *display;
-
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		if (connector->encoder == encoder) {
-			struct exynos_drm_encoder *exynos_encoder;
-
-			exynos_encoder = to_exynos_encoder(encoder);
-
-			if (exynos_encoder->old_crtc != encoder->crtc &&
-					exynos_encoder->old_crtc) {
-
-				/*
-				 * disable a plane to old crtc and change
-				 * crtc of the plane to new one.
-				 */
-				disable_plane_to_crtc(dev,
-						exynos_encoder->old_crtc,
-						encoder->crtc);
-			}
-
-			display = exynos_encoder->display;
-
-			if (display->ops->mode_set)
-				display->ops->mode_set(display,
-							adjusted_mode);
+	struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+	struct exynos_drm_display *display = exynos_encoder->display;
 
-			exynos_encoder->old_crtc = encoder->crtc;
-		}
-	}
+	if (display->ops->mode_set)
+		display->ops->mode_set(display, adjusted_mode);
 }
 
 static void exynos_drm_encoder_prepare(struct drm_encoder *encoder)
-- 
1.8.4
