From: Sean Paul <seanpaul@chromium.org>
To: Inki Dae <inki.dae@samsung.com>
Cc: "Stéphane Marchesin" <marcheu@chromium.org>,
"Jingoo Han" <jg1.han@samsung.com>,
dri-devel <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH v3 21/32] drm/exynos: Move dp driver from video/ to drm/
Date: Thu, 31 Oct 2013 12:05:34 -0400 [thread overview]
Message-ID: <CAOw6vbKwYbDk-SVBhKXfdmGK3Ph+JKLB5aR79oCHhjReGMHgAQ@mail.gmail.com> (raw)
In-Reply-To: <031801ced626$7cca5820$765f0860$%dae@samsung.com>
On Thu, Oct 31, 2013 at 6:46 AM, Inki Dae <inki.dae@samsung.com> wrote:
> CCing Jingoo,
>
> Is that ok to remove eDP driver from video/exynos? Isn't this driver really
> used by Linux framebuffer driver, s3c-fb.c?
>
> Of course, now s3c-fb driver is dead code because this driver doesn't
> support device tree yet but we would need more reviews and discussions about
> moving this driver into drm side. Let's watch new rules for device tree
> bindings of DRM world. So I'd not like to merge this driver yet.
>
Hi Inki,
I don't think that the dt bindings conversation has any bearing on
this patch. IMO, the justification for doing this is:
- Suspend/resume/dpms is currently broken for boards that use the edp driver
- HDMI driver is already in drm, so it makes sense to have DP in as well
- This allows us to do things like proper hpd, and EDID in DP driver
- Allows us to remove all encoder/connector oriented code from fimd
We've been talking about this for over 10 months now, is there really
anything left to discuss?
Sean
> Thanks,
> Inki Dae
>
>> -----Original Message-----
>> From: Sean Paul [mailto:seanpaul@chromium.org]
>> Sent: Wednesday, October 30, 2013 1:13 AM
>> To: dri-devel@lists.freedesktop.org; inki.dae@samsung.com
>> Cc: airlied@linux.ie; tomasz.figa@gmail.com; marcheu@chromium.org; Sean
>> Paul
>> Subject: [PATCH v3 21/32] drm/exynos: Move dp driver from video/ to drm/
>>
>> This patch moves the code from video/ to drm/
>>
>> Signed-off-by: Sean Paul <seanpaul@chromium.org>
>> ---
>>
>> Changes in v2: None
>> Changes in v3: None
>>
>> drivers/gpu/drm/exynos/Kconfig | 7 +
>> drivers/gpu/drm/exynos/Makefile | 1 +
>> drivers/gpu/drm/exynos/exynos_dp_core.c | 1213
>> ++++++++++++++++++++++++++++++
>> drivers/gpu/drm/exynos/exynos_dp_core.h | 210 ++++++
>> drivers/gpu/drm/exynos/exynos_dp_reg.c | 1245
>> +++++++++++++++++++++++++++++++
>> drivers/gpu/drm/exynos/exynos_dp_reg.h | 366 +++++++++
>> drivers/video/exynos/Kconfig | 7 -
>> drivers/video/exynos/Makefile | 1 -
>> drivers/video/exynos/exynos_dp_core.c | 1213
> ---------------------------
>> ---
>> drivers/video/exynos/exynos_dp_core.h | 210 ------
>> drivers/video/exynos/exynos_dp_reg.c | 1245
> ---------------------------
>> ----
>> drivers/video/exynos/exynos_dp_reg.h | 366 ---------
>> 12 files changed, 3042 insertions(+), 3042 deletions(-)
>> create mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.c
>> create mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.h
>> create mode 100644 drivers/gpu/drm/exynos/exynos_dp_reg.c
>> create mode 100644 drivers/gpu/drm/exynos/exynos_dp_reg.h
>> delete mode 100644 drivers/video/exynos/exynos_dp_core.c
>> delete mode 100644 drivers/video/exynos/exynos_dp_core.h
>> delete mode 100644 drivers/video/exynos/exynos_dp_reg.c
>> delete mode 100644 drivers/video/exynos/exynos_dp_reg.h
>>
>> diff --git a/drivers/gpu/drm/exynos/Kconfig
>> b/drivers/gpu/drm/exynos/Kconfig
>> index 45b6ef5..3ace74f 100644
>> --- a/drivers/gpu/drm/exynos/Kconfig
>> +++ b/drivers/gpu/drm/exynos/Kconfig
>> @@ -30,6 +30,13 @@ config DRM_EXYNOS_FIMD
>> help
>> Choose this option if you want to use Exynos FIMD for DRM.
>>
>> +config DRM_EXYNOS_DP
>> + bool "EXYNOS DRM DP driver support"
>> + depends on ARCH_EXYNOS
>> + default n
>> + help
>> + This enables support for DP device.
>> +
>> config DRM_EXYNOS_HDMI
>> bool "Exynos DRM HDMI"
>> depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_TV
>> diff --git a/drivers/gpu/drm/exynos/Makefile
>> b/drivers/gpu/drm/exynos/Makefile
>> index afbe499..fc8555c 100644
>> --- a/drivers/gpu/drm/exynos/Makefile
>> +++ b/drivers/gpu/drm/exynos/Makefile
>> @@ -11,6 +11,7 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o
>> exynos_drm_connector.o \
>> exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
>> exynosdrm-$(CONFIG_DRM_EXYNOS_DMABUF) += exynos_drm_dmabuf.o
>> exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD) += exynos_drm_fimd.o
>> +exynosdrm-$(CONFIG_DRM_EXYNOS_DP) += exynos_dp_core.o
>> exynos_dp_reg.o
>> exynosdrm-$(CONFIG_DRM_EXYNOS_HDMI) += exynos_hdmi.o exynos_mixer.o
>> exynosdrm-$(CONFIG_DRM_EXYNOS_VIDI) += exynos_drm_vidi.o
>> exynosdrm-$(CONFIG_DRM_EXYNOS_G2D) += exynos_drm_g2d.o
>> diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c
>> b/drivers/gpu/drm/exynos/exynos_dp_core.c
>> new file mode 100644
>> index 0000000..089ae22
>> --- /dev/null
>> +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c
>> @@ -0,0 +1,1213 @@
>> +/*
>> + * Samsung SoC DP (Display Port) interface driver.
>> + *
>> + * Copyright (C) 2012 Samsung Electronics Co., Ltd.
>> + * Author: Jingoo Han <jg1.han@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/err.h>
>> +#include <linux/clk.h>
>> +#include <linux/io.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/delay.h>
>> +#include <linux/of.h>
>> +
>> +#include <video/exynos_dp.h>
>> +
>> +#include "exynos_dp_core.h"
>> +
>> +static int exynos_dp_init_dp(struct exynos_dp_device *dp)
>> +{
>> + exynos_dp_reset(dp);
>> +
>> + exynos_dp_swreset(dp);
>> +
>> + exynos_dp_init_analog_param(dp);
>> + exynos_dp_init_interrupt(dp);
>> +
>> + /* SW defined function Normal operation */
>> + exynos_dp_enable_sw_function(dp);
>> +
>> + exynos_dp_config_interrupt(dp);
>> + exynos_dp_init_analog_func(dp);
>> +
>> + exynos_dp_init_hpd(dp);
>> + exynos_dp_init_aux(dp);
>> +
>> + return 0;
>> +}
>> +
>> +static int exynos_dp_detect_hpd(struct exynos_dp_device *dp)
>> +{
>> + int timeout_loop = 0;
>> +
>> + while (exynos_dp_get_plug_in_status(dp) != 0) {
>> + timeout_loop++;
>> + if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> + dev_err(dp->dev, "failed to get hpd plug status\n");
>> + return -ETIMEDOUT;
>> + }
>> + usleep_range(10, 11);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned char exynos_dp_calc_edid_check_sum(unsigned char
>> *edid_data)
>> +{
>> + int i;
>> + unsigned char sum = 0;
>> +
>> + for (i = 0; i < EDID_BLOCK_LENGTH; i++)
>> + sum = sum + edid_data[i];
>> +
>> + return sum;
>> +}
>> +
>> +static int exynos_dp_read_edid(struct exynos_dp_device *dp)
>> +{
>> + unsigned char edid[EDID_BLOCK_LENGTH * 2];
>> + unsigned int extend_block = 0;
>> + unsigned char sum;
>> + unsigned char test_vector;
>> + int retval;
>> +
>> + /*
>> + * EDID device address is 0x50.
>> + * However, if necessary, you must have set upper address
>> + * into E-EDID in I2C device, 0x30.
>> + */
>> +
>> + /* Read Extension Flag, Number of 128-byte EDID extension blocks */
>> + retval = exynos_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
>> + EDID_EXTENSION_FLAG,
>> + &extend_block);
>> + if (retval)
>> + return retval;
>> +
>> + if (extend_block > 0) {
>> + dev_dbg(dp->dev, "EDID data includes a single
> extension!\n");
>> +
>> + /* Read EDID data */
>> + retval = exynos_dp_read_bytes_from_i2c(dp,
>> I2C_EDID_DEVICE_ADDR,
>> + EDID_HEADER_PATTERN,
>> + EDID_BLOCK_LENGTH,
>> + &edid[EDID_HEADER_PATTERN]);
>> + if (retval != 0) {
>> + dev_err(dp->dev, "EDID Read failed!\n");
>> + return -EIO;
>> + }
>> + sum = exynos_dp_calc_edid_check_sum(edid);
>> + if (sum != 0) {
>> + dev_err(dp->dev, "EDID bad checksum!\n");
>> + return -EIO;
>> + }
>> +
>> + /* Read additional EDID data */
>> + retval = exynos_dp_read_bytes_from_i2c(dp,
>> + I2C_EDID_DEVICE_ADDR,
>> + EDID_BLOCK_LENGTH,
>> + EDID_BLOCK_LENGTH,
>> + &edid[EDID_BLOCK_LENGTH]);
>> + if (retval != 0) {
>> + dev_err(dp->dev, "EDID Read failed!\n");
>> + return -EIO;
>> + }
>> + sum =
>> exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
>> + if (sum != 0) {
>> + dev_err(dp->dev, "EDID bad checksum!\n");
>> + return -EIO;
>> + }
>> +
>> + exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TEST_REQUEST,
>> + &test_vector);
>> + if (test_vector & DPCD_TEST_EDID_READ) {
>> + exynos_dp_write_byte_to_dpcd(dp,
>> + DPCD_ADDR_TEST_EDID_CHECKSUM,
>> + edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
>> + exynos_dp_write_byte_to_dpcd(dp,
>> + DPCD_ADDR_TEST_RESPONSE,
>> + DPCD_TEST_EDID_CHECKSUM_WRITE);
>> + }
>> + } else {
>> + dev_info(dp->dev, "EDID data does not include any
>> extensions.\n");
>> +
>> + /* Read EDID data */
>> + retval = exynos_dp_read_bytes_from_i2c(dp,
>> + I2C_EDID_DEVICE_ADDR,
>> + EDID_HEADER_PATTERN,
>> + EDID_BLOCK_LENGTH,
>> + &edid[EDID_HEADER_PATTERN]);
>> + if (retval != 0) {
>> + dev_err(dp->dev, "EDID Read failed!\n");
>> + return -EIO;
>> + }
>> + sum = exynos_dp_calc_edid_check_sum(edid);
>> + if (sum != 0) {
>> + dev_err(dp->dev, "EDID bad checksum!\n");
>> + return -EIO;
>> + }
>> +
>> + exynos_dp_read_byte_from_dpcd(dp,
>> + DPCD_ADDR_TEST_REQUEST,
>> + &test_vector);
>> + if (test_vector & DPCD_TEST_EDID_READ) {
>> + exynos_dp_write_byte_to_dpcd(dp,
>> + DPCD_ADDR_TEST_EDID_CHECKSUM,
>> + edid[EDID_CHECKSUM]);
>> + exynos_dp_write_byte_to_dpcd(dp,
>> + DPCD_ADDR_TEST_RESPONSE,
>> + DPCD_TEST_EDID_CHECKSUM_WRITE);
>> + }
>> + }
>> +
>> + dev_err(dp->dev, "EDID Read success!\n");
>> + return 0;
>> +}
>> +
>> +static int exynos_dp_handle_edid(struct exynos_dp_device *dp)
>> +{
>> + u8 buf[12];
>> + int i;
>> + int retval;
>> +
>> + /* Read DPCD DPCD_ADDR_DPCD_REV~RECEIVE_PORT1_CAP_1 */
>> + retval = exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_DPCD_REV,
>> + 12, buf);
>> + if (retval)
>> + return retval;
>> +
>> + /* Read EDID */
>> + for (i = 0; i < 3; i++) {
>> + retval = exynos_dp_read_edid(dp);
>> + if (!retval)
>> + break;
>> + }
>> +
>> + return retval;
>> +}
>> +
>> +static void exynos_dp_enable_rx_to_enhanced_mode(struct exynos_dp_device
>> *dp,
>> + bool enable)
>> +{
>> + u8 data;
>> +
>> + exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data);
>> +
>> + if (enable)
>> + exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
>> + DPCD_ENHANCED_FRAME_EN |
>> + DPCD_LANE_COUNT_SET(data));
>> + else
>> + exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
>> + DPCD_LANE_COUNT_SET(data));
>> +}
>> +
>> +static int exynos_dp_is_enhanced_mode_available(struct exynos_dp_device
>> *dp)
>> +{
>> + u8 data;
>> + int retval;
>> +
>> + exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data);
>> + retval = DPCD_ENHANCED_FRAME_CAP(data);
>> +
>> + return retval;
>> +}
>> +
>> +static void exynos_dp_set_enhanced_mode(struct exynos_dp_device *dp)
>> +{
>> + u8 data;
>> +
>> + data = exynos_dp_is_enhanced_mode_available(dp);
>> + exynos_dp_enable_rx_to_enhanced_mode(dp, data);
>> + exynos_dp_enable_enhanced_mode(dp, data);
>> +}
>> +
>> +static void exynos_dp_training_pattern_dis(struct exynos_dp_device *dp)
>> +{
>> + exynos_dp_set_training_pattern(dp, DP_NONE);
>> +
>> + exynos_dp_write_byte_to_dpcd(dp,
>> + DPCD_ADDR_TRAINING_PATTERN_SET,
>> + DPCD_TRAINING_PATTERN_DISABLED);
>> +}
>> +
>> +static void exynos_dp_set_lane_lane_pre_emphasis(struct exynos_dp_device
>> *dp,
>> + int pre_emphasis, int lane)
>> +{
>> + switch (lane) {
>> + case 0:
>> + exynos_dp_set_lane0_pre_emphasis(dp, pre_emphasis);
>> + break;
>> + case 1:
>> + exynos_dp_set_lane1_pre_emphasis(dp, pre_emphasis);
>> + break;
>> +
>> + case 2:
>> + exynos_dp_set_lane2_pre_emphasis(dp, pre_emphasis);
>> + break;
>> +
>> + case 3:
>> + exynos_dp_set_lane3_pre_emphasis(dp, pre_emphasis);
>> + break;
>> + }
>> +}
>> +
>> +static int exynos_dp_link_start(struct exynos_dp_device *dp)
>> +{
>> + u8 buf[4];
>> + int lane, lane_count, pll_tries, retval;
>> +
>> + lane_count = dp->link_train.lane_count;
>> +
>> + dp->link_train.lt_state = CLOCK_RECOVERY;
>> + dp->link_train.eq_loop = 0;
>> +
>> + for (lane = 0; lane < lane_count; lane++)
>> + dp->link_train.cr_loop[lane] = 0;
>> +
>> + /* Set link rate and count as you want to establish*/
>> + exynos_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
>> + exynos_dp_set_lane_count(dp, dp->link_train.lane_count);
>> +
>> + /* Setup RX configuration */
>> + buf[0] = dp->link_train.link_rate;
>> + buf[1] = dp->link_train.lane_count;
>> + retval = exynos_dp_write_bytes_to_dpcd(dp, DPCD_ADDR_LINK_BW_SET,
>> + 2, buf);
>> + if (retval)
>> + return retval;
>> +
>> + /* Set TX pre-emphasis to minimum */
>> + for (lane = 0; lane < lane_count; lane++)
>> + exynos_dp_set_lane_lane_pre_emphasis(dp,
>> + PRE_EMPHASIS_LEVEL_0, lane);
>> +
>> + /* Wait for PLL lock */
>> + pll_tries = 0;
>> + while (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> + if (pll_tries == DP_TIMEOUT_LOOP_COUNT) {
>> + dev_err(dp->dev, "Wait for PLL lock timed out\n");
>> + return -ETIMEDOUT;
>> + }
>> +
>> + pll_tries++;
>> + usleep_range(90, 120);
>> + }
>> +
>> + /* Set training pattern 1 */
>> + exynos_dp_set_training_pattern(dp, TRAINING_PTN1);
>> +
>> + /* Set RX training pattern */
>> + retval = exynos_dp_write_byte_to_dpcd(dp,
>> + DPCD_ADDR_TRAINING_PATTERN_SET,
>> + DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1);
>> + if (retval)
>> + return retval;
>> +
>> + for (lane = 0; lane < lane_count; lane++)
>> + buf[lane] = DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 |
>> + DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0;
>> +
>> + retval = exynos_dp_write_bytes_to_dpcd(dp,
>> DPCD_ADDR_TRAINING_LANE0_SET,
>> + lane_count, buf);
>> +
>> + return retval;
>> +}
>> +
>> +static unsigned char exynos_dp_get_lane_status(u8 link_status[2], int
>> lane)
>> +{
>> + int shift = (lane & 1) * 4;
>> + u8 link_value = link_status[lane>>1];
>> +
>> + return (link_value >> shift) & 0xf;
>> +}
>> +
>> +static int exynos_dp_clock_recovery_ok(u8 link_status[2], int lane_count)
>> +{
>> + int lane;
>> + u8 lane_status;
>> +
>> + for (lane = 0; lane < lane_count; lane++) {
>> + lane_status = exynos_dp_get_lane_status(link_status, lane);
>> + if ((lane_status & DPCD_LANE_CR_DONE) == 0)
>> + return -EINVAL;
>> + }
>> + return 0;
>> +}
>> +
>> +static int exynos_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
>> + int lane_count)
>> +{
>> + int lane;
>> + u8 lane_status;
>> +
>> + if ((link_align & DPCD_INTERLANE_ALIGN_DONE) == 0)
>> + return -EINVAL;
>> +
>> + for (lane = 0; lane < lane_count; lane++) {
>> + lane_status = exynos_dp_get_lane_status(link_status, lane);
>> + lane_status &= DPCD_CHANNEL_EQ_BITS;
>> + if (lane_status != DPCD_CHANNEL_EQ_BITS)
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned char exynos_dp_get_adjust_request_voltage(u8
>> adjust_request[2],
>> + int lane)
>> +{
>> + int shift = (lane & 1) * 4;
>> + u8 link_value = adjust_request[lane>>1];
>> +
>> + return (link_value >> shift) & 0x3;
>> +}
>> +
>> +static unsigned char exynos_dp_get_adjust_request_pre_emphasis(
>> + u8 adjust_request[2],
>> + int lane)
>> +{
>> + int shift = (lane & 1) * 4;
>> + u8 link_value = adjust_request[lane>>1];
>> +
>> + return ((link_value >> shift) & 0xc) >> 2;
>> +}
>> +
>> +static void exynos_dp_set_lane_link_training(struct exynos_dp_device *dp,
>> + u8 training_lane_set, int lane)
>> +{
>> + switch (lane) {
>> + case 0:
>> + exynos_dp_set_lane0_link_training(dp, training_lane_set);
>> + break;
>> + case 1:
>> + exynos_dp_set_lane1_link_training(dp, training_lane_set);
>> + break;
>> +
>> + case 2:
>> + exynos_dp_set_lane2_link_training(dp, training_lane_set);
>> + break;
>> +
>> + case 3:
>> + exynos_dp_set_lane3_link_training(dp, training_lane_set);
>> + break;
>> + }
>> +}
>> +
>> +static unsigned int exynos_dp_get_lane_link_training(
>> + struct exynos_dp_device *dp,
>> + int lane)
>> +{
>> + u32 reg;
>> +
>> + switch (lane) {
>> + case 0:
>> + reg = exynos_dp_get_lane0_link_training(dp);
>> + break;
>> + case 1:
>> + reg = exynos_dp_get_lane1_link_training(dp);
>> + break;
>> + case 2:
>> + reg = exynos_dp_get_lane2_link_training(dp);
>> + break;
>> + case 3:
>> + reg = exynos_dp_get_lane3_link_training(dp);
>> + break;
>> + default:
>> + WARN_ON(1);
>> + return 0;
>> + }
>> +
>> + return reg;
>> +}
>> +
>> +static void exynos_dp_reduce_link_rate(struct exynos_dp_device *dp)
>> +{
>> + exynos_dp_training_pattern_dis(dp);
>> + exynos_dp_set_enhanced_mode(dp);
>> +
>> + dp->link_train.lt_state = FAILED;
>> +}
>> +
>> +static void exynos_dp_get_adjust_training_lane(struct exynos_dp_device
>> *dp,
>> + u8 adjust_request[2])
>> +{
>> + int lane, lane_count;
>> + u8 voltage_swing, pre_emphasis, training_lane;
>> +
>> + lane_count = dp->link_train.lane_count;
>> + for (lane = 0; lane < lane_count; lane++) {
>> + voltage_swing = exynos_dp_get_adjust_request_voltage(
>> + adjust_request, lane);
>> + pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
>> + adjust_request, lane);
>> + training_lane = DPCD_VOLTAGE_SWING_SET(voltage_swing) |
>> + DPCD_PRE_EMPHASIS_SET(pre_emphasis);
>> +
>> + if (voltage_swing == VOLTAGE_LEVEL_3)
>> + training_lane |= DPCD_MAX_SWING_REACHED;
>> + if (pre_emphasis == PRE_EMPHASIS_LEVEL_3)
>> + training_lane |= DPCD_MAX_PRE_EMPHASIS_REACHED;
>> +
>> + dp->link_train.training_lane[lane] = training_lane;
>> + }
>> +}
>> +
>> +static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
>> +{
>> + int lane, lane_count, retval;
>> + u8 voltage_swing, pre_emphasis, training_lane;
>> + u8 link_status[2], adjust_request[2];
>> +
>> + usleep_range(100, 101);
>> +
>> + lane_count = dp->link_train.lane_count;
>> +
>> + retval = exynos_dp_read_bytes_from_dpcd(dp,
>> + DPCD_ADDR_LANE0_1_STATUS, 2, link_status);
>> + if (retval)
>> + return retval;
>> +
>> + retval = exynos_dp_read_bytes_from_dpcd(dp,
>> + DPCD_ADDR_ADJUST_REQUEST_LANE0_1, 2,
> adjust_request);
>> + if (retval)
>> + return retval;
>> +
>> + if (exynos_dp_clock_recovery_ok(link_status, lane_count) == 0) {
>> + /* set training pattern 2 for EQ */
>> + exynos_dp_set_training_pattern(dp, TRAINING_PTN2);
>> +
>> + retval = exynos_dp_write_byte_to_dpcd(dp,
>> + DPCD_ADDR_TRAINING_PATTERN_SET,
>> + DPCD_SCRAMBLING_DISABLED |
>> + DPCD_TRAINING_PATTERN_2);
>> + if (retval)
>> + return retval;
>> +
>> + dev_info(dp->dev, "Link Training Clock Recovery success\n");
>> + dp->link_train.lt_state = EQUALIZER_TRAINING;
>> + } else {
>> + for (lane = 0; lane < lane_count; lane++) {
>> + training_lane = exynos_dp_get_lane_link_training(
>> + dp, lane);
>> + voltage_swing =
> exynos_dp_get_adjust_request_voltage(
>> + adjust_request,
> lane);
>> + pre_emphasis =
>> exynos_dp_get_adjust_request_pre_emphasis(
>> + adjust_request,
> lane);
>> +
>> + if (DPCD_VOLTAGE_SWING_GET(training_lane) ==
>> + voltage_swing &&
>> + DPCD_PRE_EMPHASIS_GET(training_lane) ==
>> + pre_emphasis)
>> + dp->link_train.cr_loop[lane]++;
>> +
>> + if (dp->link_train.cr_loop[lane] == MAX_CR_LOOP ||
>> + voltage_swing == VOLTAGE_LEVEL_3 ||
>> + pre_emphasis == PRE_EMPHASIS_LEVEL_3) {
>> + dev_err(dp->dev, "CR Max reached
> (%d,%d,%d)\n",
>> + dp->link_train.cr_loop[lane],
>> + voltage_swing, pre_emphasis);
>> + exynos_dp_reduce_link_rate(dp);
>> + return -EIO;
>> + }
>> + }
>> + }
>> +
>> + exynos_dp_get_adjust_training_lane(dp, adjust_request);
>> +
>> + for (lane = 0; lane < lane_count; lane++)
>> + exynos_dp_set_lane_link_training(dp,
>> + dp->link_train.training_lane[lane], lane);
>> +
>> + retval = exynos_dp_write_bytes_to_dpcd(dp,
>> + DPCD_ADDR_TRAINING_LANE0_SET, lane_count,
>> + dp->link_train.training_lane);
>> + if (retval)
>> + return retval;
>> +
>> + return retval;
>> +}
>> +
>> +static int exynos_dp_process_equalizer_training(struct exynos_dp_device
>> *dp)
>> +{
>> + int lane, lane_count, retval;
>> + u32 reg;
>> + u8 link_align, link_status[2], adjust_request[2];
>> +
>> + usleep_range(400, 401);
>> +
>> + lane_count = dp->link_train.lane_count;
>> +
>> + retval = exynos_dp_read_bytes_from_dpcd(dp,
>> + DPCD_ADDR_LANE0_1_STATUS, 2, link_status);
>> + if (retval)
>> + return retval;
>> +
>> + if (exynos_dp_clock_recovery_ok(link_status, lane_count)) {
>> + exynos_dp_reduce_link_rate(dp);
>> + return -EIO;
>> + }
>> +
>> + retval = exynos_dp_read_bytes_from_dpcd(dp,
>> + DPCD_ADDR_ADJUST_REQUEST_LANE0_1, 2,
> adjust_request);
>> + if (retval)
>> + return retval;
>> +
>> + retval = exynos_dp_read_byte_from_dpcd(dp,
>> + DPCD_ADDR_LANE_ALIGN_STATUS_UPDATED, &link_align);
>> + if (retval)
>> + return retval;
>> +
>> + exynos_dp_get_adjust_training_lane(dp, adjust_request);
>> +
>> + if (!exynos_dp_channel_eq_ok(link_status, link_align, lane_count))
>> {
>> + /* traing pattern Set to Normal */
>> + exynos_dp_training_pattern_dis(dp);
>> +
>> + dev_info(dp->dev, "Link Training success!\n");
>> +
>> + exynos_dp_get_link_bandwidth(dp, ®);
>> + dp->link_train.link_rate = reg;
>> + dev_dbg(dp->dev, "final bandwidth = %.2x\n",
>> + dp->link_train.link_rate);
>> +
>> + exynos_dp_get_lane_count(dp, ®);
>> + dp->link_train.lane_count = reg;
>> + dev_dbg(dp->dev, "final lane count = %.2x\n",
>> + dp->link_train.lane_count);
>> +
>> + /* set enhanced mode if available */
>> + exynos_dp_set_enhanced_mode(dp);
>> + dp->link_train.lt_state = FINISHED;
>> +
>> + return 0;
>> + }
>> +
>> + /* not all locked */
>> + dp->link_train.eq_loop++;
>> +
>> + if (dp->link_train.eq_loop > MAX_EQ_LOOP) {
>> + dev_err(dp->dev, "EQ Max loop\n");
>> + exynos_dp_reduce_link_rate(dp);
>> + return -EIO;
>> + }
>> +
>> + for (lane = 0; lane < lane_count; lane++)
>> + exynos_dp_set_lane_link_training(dp,
>> + dp->link_train.training_lane[lane], lane);
>> +
>> + retval = exynos_dp_write_bytes_to_dpcd(dp,
>> DPCD_ADDR_TRAINING_LANE0_SET,
>> + lane_count, dp->link_train.training_lane);
>> +
>> + return retval;
>> +}
>> +
>> +static void exynos_dp_get_max_rx_bandwidth(struct exynos_dp_device *dp,
>> + u8 *bandwidth)
>> +{
>> + u8 data;
>> +
>> + /*
>> + * For DP rev.1.1, Maximum link rate of Main Link lanes
>> + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
>> + */
>> + exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LINK_RATE, &data);
>> + *bandwidth = data;
>> +}
>> +
>> +static void exynos_dp_get_max_rx_lane_count(struct exynos_dp_device *dp,
>> + u8 *lane_count)
>> +{
>> + u8 data;
>> +
>> + /*
>> + * For DP rev.1.1, Maximum number of Main Link lanes
>> + * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
>> + */
>> + exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data);
>> + *lane_count = DPCD_MAX_LANE_COUNT(data);
>> +}
>> +
>> +static void exynos_dp_init_training(struct exynos_dp_device *dp,
>> + enum link_lane_count_type max_lane,
>> + enum link_rate_type max_rate)
>> +{
>> + /*
>> + * MACRO_RST must be applied after the PLL_LOCK to avoid
>> + * the DP inter pair skew issue for at least 10 us
>> + */
>> + exynos_dp_reset_macro(dp);
>> +
>> + /* Initialize by reading RX's DPCD */
>> + exynos_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
>> + exynos_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
>> +
>> + if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
>> + (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
>> + dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
>> + dp->link_train.link_rate);
>> + dp->link_train.link_rate = LINK_RATE_1_62GBPS;
>> + }
>> +
>> + if (dp->link_train.lane_count == 0) {
>> + dev_err(dp->dev, "Rx Max Lane count is abnormal :%x !\n",
>> + dp->link_train.lane_count);
>> + dp->link_train.lane_count = (u8)LANE_COUNT1;
>> + }
>> +
>> + /* Setup TX lane count & rate */
>> + if (dp->link_train.lane_count > max_lane)
>> + dp->link_train.lane_count = max_lane;
>> + if (dp->link_train.link_rate > max_rate)
>> + dp->link_train.link_rate = max_rate;
>> +
>> + /* All DP analog module power up */
>> + exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
>> +}
>> +
>> +static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
>> +{
>> + int retval = 0, training_finished = 0;
>> +
>> + dp->link_train.lt_state = START;
>> +
>> + /* Process here */
>> + while (!retval && !training_finished) {
>> + switch (dp->link_train.lt_state) {
>> + case START:
>> + retval = exynos_dp_link_start(dp);
>> + if (retval)
>> + dev_err(dp->dev, "LT link start failed!\n");
>> + break;
>> + case CLOCK_RECOVERY:
>> + retval = exynos_dp_process_clock_recovery(dp);
>> + if (retval)
>> + dev_err(dp->dev, "LT CR failed!\n");
>> + break;
>> + case EQUALIZER_TRAINING:
>> + retval = exynos_dp_process_equalizer_training(dp);
>> + if (retval)
>> + dev_err(dp->dev, "LT EQ failed!\n");
>> + break;
>> + case FINISHED:
>> + training_finished = 1;
>> + break;
>> + case FAILED:
>> + return -EREMOTEIO;
>> + }
>> + }
>> + if (retval)
>> + dev_err(dp->dev, "eDP link training failed (%d)\n", retval);
>> +
>> + return retval;
>> +}
>> +
>> +static int exynos_dp_set_link_train(struct exynos_dp_device *dp,
>> + u32 count,
>> + u32 bwtype)
>> +{
>> + int i;
>> + int retval;
>> +
>> + for (i = 0; i < DP_TIMEOUT_LOOP_COUNT; i++) {
>> + exynos_dp_init_training(dp, count, bwtype);
>> + retval = exynos_dp_sw_link_training(dp);
>> + if (retval == 0)
>> + break;
>> +
>> + usleep_range(100, 110);
>> + }
>> +
>> + return retval;
>> +}
>> +
>> +static int exynos_dp_config_video(struct exynos_dp_device *dp)
>> +{
>> + int retval = 0;
>> + int timeout_loop = 0;
>> + int done_count = 0;
>> +
>> + exynos_dp_config_video_slave_mode(dp);
>> +
>> + exynos_dp_set_video_color_format(dp);
>> +
>> + if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> + dev_err(dp->dev, "PLL is not locked yet.\n");
>> + return -EINVAL;
>> + }
>> +
>> + for (;;) {
>> + timeout_loop++;
>> + if (exynos_dp_is_slave_video_stream_clock_on(dp) == 0)
>> + break;
>> + if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> + dev_err(dp->dev, "Timeout of video streamclk ok\n");
>> + return -ETIMEDOUT;
>> + }
>> +
>> + usleep_range(1, 2);
>> + }
>> +
>> + /* Set to use the register calculated M/N video */
>> + exynos_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0);
>> +
>> + /* For video bist, Video timing must be generated by register */
>> + exynos_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE);
>> +
>> + /* Disable video mute */
>> + exynos_dp_enable_video_mute(dp, 0);
>> +
>> + /* Configure video slave mode */
>> + exynos_dp_enable_video_master(dp, 0);
>> +
>> + /* Enable video */
>> + exynos_dp_start_video(dp);
>> +
>> + timeout_loop = 0;
>> +
>> + for (;;) {
>> + timeout_loop++;
>> + if (exynos_dp_is_video_stream_on(dp) == 0) {
>> + done_count++;
>> + if (done_count > 10)
>> + break;
>> + } else if (done_count) {
>> + done_count = 0;
>> + }
>> + if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> + dev_err(dp->dev, "Timeout of video streamclk ok\n");
>> + return -ETIMEDOUT;
>> + }
>> +
>> + usleep_range(1000, 1001);
>> + }
>> +
>> + if (retval != 0)
>> + dev_err(dp->dev, "Video stream is not detected!\n");
>> +
>> + return retval;
>> +}
>> +
>> +static void exynos_dp_enable_scramble(struct exynos_dp_device *dp, bool
>> enable)
>> +{
>> + u8 data;
>> +
>> + if (enable) {
>> + exynos_dp_enable_scrambling(dp);
>> +
>> + exynos_dp_read_byte_from_dpcd(dp,
>> + DPCD_ADDR_TRAINING_PATTERN_SET,
>> + &data);
>> + exynos_dp_write_byte_to_dpcd(dp,
>> + DPCD_ADDR_TRAINING_PATTERN_SET,
>> + (u8)(data & ~DPCD_SCRAMBLING_DISABLED));
>> + } else {
>> + exynos_dp_disable_scrambling(dp);
>> +
>> + exynos_dp_read_byte_from_dpcd(dp,
>> + DPCD_ADDR_TRAINING_PATTERN_SET,
>> + &data);
>> + exynos_dp_write_byte_to_dpcd(dp,
>> + DPCD_ADDR_TRAINING_PATTERN_SET,
>> + (u8)(data | DPCD_SCRAMBLING_DISABLED));
>> + }
>> +}
>> +
>> +static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
>> +{
>> + struct exynos_dp_device *dp = arg;
>> +
>> + enum dp_irq_type irq_type;
>> +
>> + irq_type = exynos_dp_get_irq_type(dp);
>> + switch (irq_type) {
>> + case DP_IRQ_TYPE_HP_CABLE_IN:
>> + dev_dbg(dp->dev, "Received irq - cable in\n");
>> + schedule_work(&dp->hotplug_work);
>> + exynos_dp_clear_hotplug_interrupts(dp);
>> + break;
>> + case DP_IRQ_TYPE_HP_CABLE_OUT:
>> + dev_dbg(dp->dev, "Received irq - cable out\n");
>> + exynos_dp_clear_hotplug_interrupts(dp);
>> + break;
>> + case DP_IRQ_TYPE_HP_CHANGE:
>> + /*
>> + * We get these change notifications once in a while, but
>> there
>> + * is nothing we can do with them. Just ignore it for now
> and
>> + * only handle cable changes.
>> + */
>> + dev_dbg(dp->dev, "Received irq - hotplug change;
>> ignoring.\n");
>> + exynos_dp_clear_hotplug_interrupts(dp);
>> + break;
>> + default:
>> + dev_err(dp->dev, "Received irq - unknown type!\n");
>> + break;
>> + }
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static void exynos_dp_hotplug(struct work_struct *work)
>> +{
>> + struct exynos_dp_device *dp;
>> + int ret;
>> +
>> + dp = container_of(work, struct exynos_dp_device, hotplug_work);
>> +
>> + ret = exynos_dp_detect_hpd(dp);
>> + if (ret) {
>> + /* Cable has been disconnected, we're done */
>> + return;
>> + }
>> +
>> + ret = exynos_dp_handle_edid(dp);
>> + if (ret) {
>> + dev_err(dp->dev, "unable to handle edid\n");
>> + return;
>> + }
>> +
>> + ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
>> + dp->video_info->link_rate);
>> + if (ret) {
>> + dev_err(dp->dev, "unable to do link train\n");
>> + return;
>> + }
>> +
>> + exynos_dp_enable_scramble(dp, 1);
>> + exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
>> + exynos_dp_enable_enhanced_mode(dp, 1);
>> +
>> + exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
>> + exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
>> +
>> + exynos_dp_init_video(dp);
>> + ret = exynos_dp_config_video(dp);
>> + if (ret)
>> + dev_err(dp->dev, "unable to config video\n");
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device
>> *dev)
>> +{
>> + struct device_node *dp_node = dev->of_node;
>> + struct exynos_dp_platdata *pd;
>> + struct video_info *dp_video_config;
>> +
>> + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
>> + if (!pd) {
>> + dev_err(dev, "memory allocation for pdata failed\n");
>> + return ERR_PTR(-ENOMEM);
>> + }
>> + dp_video_config = devm_kzalloc(dev,
>> + sizeof(*dp_video_config), GFP_KERNEL);
>> +
>> + if (!dp_video_config) {
>> + dev_err(dev, "memory allocation for video config failed\n");
>> + return ERR_PTR(-ENOMEM);
>> + }
>> + pd->video_info = dp_video_config;
>> +
>> + dp_video_config->h_sync_polarity =
>> + of_property_read_bool(dp_node, "hsync-active-high");
>> +
>> + dp_video_config->v_sync_polarity =
>> + of_property_read_bool(dp_node, "vsync-active-high");
>> +
>> + dp_video_config->interlaced =
>> + of_property_read_bool(dp_node, "interlaced");
>> +
>> + if (of_property_read_u32(dp_node, "samsung,color-space",
>> + &dp_video_config->color_space)) {
>> + dev_err(dev, "failed to get color-space\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + if (of_property_read_u32(dp_node, "samsung,dynamic-range",
>> + &dp_video_config->dynamic_range)) {
>> + dev_err(dev, "failed to get dynamic-range\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + if (of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
>> + &dp_video_config->ycbcr_coeff)) {
>> + dev_err(dev, "failed to get ycbcr-coeff\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + if (of_property_read_u32(dp_node, "samsung,color-depth",
>> + &dp_video_config->color_depth)) {
>> + dev_err(dev, "failed to get color-depth\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + if (of_property_read_u32(dp_node, "samsung,link-rate",
>> + &dp_video_config->link_rate)) {
>> + dev_err(dev, "failed to get link-rate\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + if (of_property_read_u32(dp_node, "samsung,lane-count",
>> + &dp_video_config->lane_count)) {
>> + dev_err(dev, "failed to get lane-count\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + return pd;
>> +}
>> +
>> +static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
>> +{
>> + struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
>> + u32 phy_base;
>> + int ret = 0;
>> +
>> + dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
>> + if (!dp_phy_node) {
>> + dev_err(dp->dev, "could not find dptx-phy node\n");
>> + return -ENODEV;
>> + }
>> +
>> + if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
>> + dev_err(dp->dev, "failed to get reg for dptx-phy\n");
>> + ret = -EINVAL;
>> + goto err;
>> + }
>> +
>> + if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
>> + &dp->enable_mask)) {
>> + dev_err(dp->dev, "failed to get enable-mask for
> dptx-phy\n");
>> + ret = -EINVAL;
>> + goto err;
>> + }
>> +
>> + dp->phy_addr = ioremap(phy_base, SZ_4);
>> + if (!dp->phy_addr) {
>> + dev_err(dp->dev, "failed to ioremap dp-phy\n");
>> + ret = -ENOMEM;
>> + goto err;
>> + }
>> +
>> +err:
>> + of_node_put(dp_phy_node);
>> +
>> + return ret;
>> +}
>> +
>> +static void exynos_dp_phy_init(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = __raw_readl(dp->phy_addr);
>> + reg |= dp->enable_mask;
>> + __raw_writel(reg, dp->phy_addr);
>> +}
>> +
>> +static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = __raw_readl(dp->phy_addr);
>> + reg &= ~(dp->enable_mask);
>> + __raw_writel(reg, dp->phy_addr);
>> +}
>> +#else
>> +static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device
>> *dev)
>> +{
>> + return NULL;
>> +}
>> +
>> +static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
>> +{
>> + return -EINVAL;
>> +}
>> +
>> +static void exynos_dp_phy_init(struct exynos_dp_device *dp)
>> +{
>> + return;
>> +}
>> +
>> +static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
>> +{
>> + return;
>> +}
>> +#endif /* CONFIG_OF */
>> +
>> +static int exynos_dp_probe(struct platform_device *pdev)
>> +{
>> + struct resource *res;
>> + struct exynos_dp_device *dp;
>> + struct exynos_dp_platdata *pdata;
>> +
>> + int ret = 0;
>> +
>> + dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
>> + GFP_KERNEL);
>> + if (!dp) {
>> + dev_err(&pdev->dev, "no memory for device data\n");
>> + return -ENOMEM;
>> + }
>> +
>> + dp->dev = &pdev->dev;
>> +
>> + if (pdev->dev.of_node) {
>> + pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
>> + if (IS_ERR(pdata))
>> + return PTR_ERR(pdata);
>> +
>> + ret = exynos_dp_dt_parse_phydata(dp);
>> + if (ret)
>> + return ret;
>> + } else {
>> + pdata = pdev->dev.platform_data;
>> + if (!pdata) {
>> + dev_err(&pdev->dev, "no platform data\n");
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + dp->clock = devm_clk_get(&pdev->dev, "dp");
>> + if (IS_ERR(dp->clock)) {
>> + dev_err(&pdev->dev, "failed to get clock\n");
>> + return PTR_ERR(dp->clock);
>> + }
>> +
>> + clk_prepare_enable(dp->clock);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +
>> + dp->reg_base = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(dp->reg_base))
>> + return PTR_ERR(dp->reg_base);
>> +
>> + dp->irq = platform_get_irq(pdev, 0);
>> + if (dp->irq == -ENXIO) {
>> + dev_err(&pdev->dev, "failed to get irq\n");
>> + return -ENODEV;
>> + }
>> +
>> + INIT_WORK(&dp->hotplug_work, exynos_dp_hotplug);
>> +
>> + dp->video_info = pdata->video_info;
>> +
>> + if (pdev->dev.of_node) {
>> + if (dp->phy_addr)
>> + exynos_dp_phy_init(dp);
>> + } else {
>> + if (pdata->phy_init)
>> + pdata->phy_init();
>> + }
>> +
>> + exynos_dp_init_dp(dp);
>> +
>> + ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler,
>> 0,
>> + "exynos-dp", dp);
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to request irq\n");
>> + return ret;
>> + }
>> +
>> + platform_set_drvdata(pdev, dp);
>> +
>> + return 0;
>> +}
>> +
>> +static int exynos_dp_remove(struct platform_device *pdev)
>> +{
>> + struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
>> + struct exynos_dp_device *dp = platform_get_drvdata(pdev);
>> +
>> + flush_work(&dp->hotplug_work);
>> +
>> + if (pdev->dev.of_node) {
>> + if (dp->phy_addr)
>> + exynos_dp_phy_exit(dp);
>> + } else {
>> + if (pdata->phy_exit)
>> + pdata->phy_exit();
>> + }
>> +
>> + clk_disable_unprepare(dp->clock);
>> +
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int exynos_dp_suspend(struct device *dev)
>> +{
>> + struct exynos_dp_platdata *pdata = dev->platform_data;
>> + struct exynos_dp_device *dp = dev_get_drvdata(dev);
>> +
>> + disable_irq(dp->irq);
>> +
>> + flush_work(&dp->hotplug_work);
>> +
>> + if (dev->of_node) {
>> + if (dp->phy_addr)
>> + exynos_dp_phy_exit(dp);
>> + } else {
>> + if (pdata->phy_exit)
>> + pdata->phy_exit();
>> + }
>> +
>> + clk_disable_unprepare(dp->clock);
>> +
>> + return 0;
>> +}
>> +
>> +static int exynos_dp_resume(struct device *dev)
>> +{
>> + struct exynos_dp_platdata *pdata = dev->platform_data;
>> + struct exynos_dp_device *dp = dev_get_drvdata(dev);
>> +
>> + if (dev->of_node) {
>> + if (dp->phy_addr)
>> + exynos_dp_phy_init(dp);
>> + } else {
>> + if (pdata->phy_init)
>> + pdata->phy_init();
>> + }
>> +
>> + clk_prepare_enable(dp->clock);
>> +
>> + exynos_dp_init_dp(dp);
>> +
>> + enable_irq(dp->irq);
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> +static const struct dev_pm_ops exynos_dp_pm_ops = {
>> + SET_SYSTEM_SLEEP_PM_OPS(exynos_dp_suspend, exynos_dp_resume)
>> +};
>> +
>> +static const struct of_device_id exynos_dp_match[] = {
>> + { .compatible = "samsung,exynos5-dp" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, exynos_dp_match);
>> +
>> +static struct platform_driver exynos_dp_driver = {
>> + .probe = exynos_dp_probe,
>> + .remove = exynos_dp_remove,
>> + .driver = {
>> + .name = "exynos-dp",
>> + .owner = THIS_MODULE,
>> + .pm = &exynos_dp_pm_ops,
>> + .of_match_table = of_match_ptr(exynos_dp_match),
>> + },
>> +};
>> +
>> +module_platform_driver(exynos_dp_driver);
>> +
>> +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
>> +MODULE_DESCRIPTION("Samsung SoC DP Driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.h
>> b/drivers/gpu/drm/exynos/exynos_dp_core.h
>> new file mode 100644
>> index 0000000..6c567bbf
>> --- /dev/null
>> +++ b/drivers/gpu/drm/exynos/exynos_dp_core.h
>> @@ -0,0 +1,210 @@
>> +/*
>> + * Header file for Samsung DP (Display Port) interface driver.
>> + *
>> + * Copyright (C) 2012 Samsung Electronics Co., Ltd.
>> + * Author: Jingoo Han <jg1.han@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +#ifndef _EXYNOS_DP_CORE_H
>> +#define _EXYNOS_DP_CORE_H
>> +
>> +enum dp_irq_type {
>> + DP_IRQ_TYPE_HP_CABLE_IN,
>> + DP_IRQ_TYPE_HP_CABLE_OUT,
>> + DP_IRQ_TYPE_HP_CHANGE,
>> + DP_IRQ_TYPE_UNKNOWN,
>> +};
>> +
>> +struct link_train {
>> + int eq_loop;
>> + int cr_loop[4];
>> +
>> + u8 link_rate;
>> + u8 lane_count;
>> + u8 training_lane[4];
>> +
>> + enum link_training_state lt_state;
>> +};
>> +
>> +struct exynos_dp_device {
>> + struct device *dev;
>> + struct clk *clock;
>> + unsigned int irq;
>> + void __iomem *reg_base;
>> + void __iomem *phy_addr;
>> + unsigned int enable_mask;
>> +
>> + struct video_info *video_info;
>> + struct link_train link_train;
>> + struct work_struct hotplug_work;
>> +};
>> +
>> +/* exynos_dp_reg.c */
>> +void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool
>> enable);
>> +void exynos_dp_stop_video(struct exynos_dp_device *dp);
>> +void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable);
>> +void exynos_dp_init_analog_param(struct exynos_dp_device *dp);
>> +void exynos_dp_init_interrupt(struct exynos_dp_device *dp);
>> +void exynos_dp_reset(struct exynos_dp_device *dp);
>> +void exynos_dp_swreset(struct exynos_dp_device *dp);
>> +void exynos_dp_config_interrupt(struct exynos_dp_device *dp);
>> +enum pll_status exynos_dp_get_pll_lock_status(struct exynos_dp_device
>> *dp);
>> +void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool
>> enable);
>> +void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
>> + enum analog_power_block block,
>> + bool enable);
>> +void exynos_dp_init_analog_func(struct exynos_dp_device *dp);
>> +void exynos_dp_init_hpd(struct exynos_dp_device *dp);
>> +enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp);
>> +void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp);
>> +void exynos_dp_reset_aux(struct exynos_dp_device *dp);
>> +void exynos_dp_init_aux(struct exynos_dp_device *dp);
>> +int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp);
>> +void exynos_dp_enable_sw_function(struct exynos_dp_device *dp);
>> +int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp);
>> +int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
>> + unsigned int reg_addr,
>> + unsigned char data);
>> +int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
>> + unsigned int reg_addr,
>> + unsigned char *data);
>> +int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
>> + unsigned int reg_addr,
>> + unsigned int count,
>> + unsigned char data[]);
>> +int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
>> + unsigned int reg_addr,
>> + unsigned int count,
>> + unsigned char data[]);
>> +int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
>> + unsigned int device_addr,
>> + unsigned int reg_addr);
>> +int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
>> + unsigned int device_addr,
>> + unsigned int reg_addr,
>> + unsigned int *data);
>> +int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
>> + unsigned int device_addr,
>> + unsigned int reg_addr,
>> + unsigned int count,
>> + unsigned char edid[]);
>> +void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32
>> bwtype);
>> +void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32
>> *bwtype);
>> +void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count);
>> +void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count);
>> +void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool
>> enable);
>> +void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
>> + enum pattern_set pattern);
>> +void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32
>> level);
>> +void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32
>> level);
>> +void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32
>> level);
>> +void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32
>> level);
>> +void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
>> + u32 training_lane);
>> +void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
>> + u32 training_lane);
>> +void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
>> + u32 training_lane);
>> +void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
>> + u32 training_lane);
>> +u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp);
>> +u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp);
>> +u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp);
>> +u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp);
>> +void exynos_dp_reset_macro(struct exynos_dp_device *dp);
>> +void exynos_dp_init_video(struct exynos_dp_device *dp);
>> +
>> +void exynos_dp_set_video_color_format(struct exynos_dp_device *dp);
>> +int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device
> *dp);
>> +void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
>> + enum clock_recovery_m_value_type type,
>> + u32 m_value,
>> + u32 n_value);
>> +void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32
>> type);
>> +void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool
>> enable);
>> +void exynos_dp_start_video(struct exynos_dp_device *dp);
>> +int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp);
>> +void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp);
>> +void exynos_dp_enable_scrambling(struct exynos_dp_device *dp);
>> +void exynos_dp_disable_scrambling(struct exynos_dp_device *dp);
>> +
>> +/* I2C EDID Chip ID, Slave Address */
>> +#define I2C_EDID_DEVICE_ADDR 0x50
>> +#define I2C_E_EDID_DEVICE_ADDR 0x30
>> +
>> +#define EDID_BLOCK_LENGTH 0x80
>> +#define EDID_HEADER_PATTERN 0x00
>> +#define EDID_EXTENSION_FLAG 0x7e
>> +#define EDID_CHECKSUM 0x7f
>> +
>> +/* Definition for DPCD Register */
>> +#define DPCD_ADDR_DPCD_REV 0x0000
>> +#define DPCD_ADDR_MAX_LINK_RATE 0x0001
>> +#define DPCD_ADDR_MAX_LANE_COUNT 0x0002
>> +#define DPCD_ADDR_LINK_BW_SET 0x0100
>> +#define DPCD_ADDR_LANE_COUNT_SET 0x0101
>> +#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102
>> +#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103
>> +#define DPCD_ADDR_LANE0_1_STATUS 0x0202
>> +#define DPCD_ADDR_LANE_ALIGN_STATUS_UPDATED 0x0204
>> +#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206
>> +#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207
>> +#define DPCD_ADDR_TEST_REQUEST 0x0218
>> +#define DPCD_ADDR_TEST_RESPONSE 0x0260
>> +#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261
>> +#define DPCD_ADDR_SINK_POWER_STATE 0x0600
>> +
>> +/* DPCD_ADDR_MAX_LANE_COUNT */
>> +#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
>> +#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
>> +
>> +/* DPCD_ADDR_LANE_COUNT_SET */
>> +#define DPCD_ENHANCED_FRAME_EN (0x1 << 7)
>> +#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f)
>> +
>> +/* DPCD_ADDR_TRAINING_PATTERN_SET */
>> +#define DPCD_SCRAMBLING_DISABLED (0x1 << 5)
>> +#define DPCD_SCRAMBLING_ENABLED (0x0 << 5)
>> +#define DPCD_TRAINING_PATTERN_2 (0x2 << 0)
>> +#define DPCD_TRAINING_PATTERN_1 (0x1 << 0)
>> +#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0)
>> +
>> +/* DPCD_ADDR_TRAINING_LANE0_SET */
>> +#define DPCD_MAX_PRE_EMPHASIS_REACHED (0x1 << 5)
>> +#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3)
>> +#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3)
>> +#define DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 (0x0 << 3)
>> +#define DPCD_MAX_SWING_REACHED (0x1 << 2)
>> +#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
>> +#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
>> +#define DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0 (0x0 << 0)
>> +
>> +/* DPCD_ADDR_LANE0_1_STATUS */
>> +#define DPCD_LANE_SYMBOL_LOCKED (0x1 << 2)
>> +#define DPCD_LANE_CHANNEL_EQ_DONE (0x1 << 1)
>> +#define DPCD_LANE_CR_DONE (0x1 << 0)
>> +#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE| \
>> + DPCD_LANE_CHANNEL_EQ_DONE|\
>> + DPCD_LANE_SYMBOL_LOCKED)
>> +
>> +/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */
>> +#define DPCD_LINK_STATUS_UPDATED (0x1 << 7)
>> +#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6)
>> +#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0)
>> +
>> +/* DPCD_ADDR_TEST_REQUEST */
>> +#define DPCD_TEST_EDID_READ (0x1 << 2)
>> +
>> +/* DPCD_ADDR_TEST_RESPONSE */
>> +#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2)
>> +
>> +/* DPCD_ADDR_SINK_POWER_STATE */
>> +#define DPCD_SET_POWER_STATE_D0 (0x1 << 0)
>> +#define DPCD_SET_POWER_STATE_D4 (0x2 << 0)
>> +
>> +#endif /* _EXYNOS_DP_CORE_H */
>> diff --git a/drivers/gpu/drm/exynos/exynos_dp_reg.c
>> b/drivers/gpu/drm/exynos/exynos_dp_reg.c
>> new file mode 100644
>> index 0000000..29d9d03
>> --- /dev/null
>> +++ b/drivers/gpu/drm/exynos/exynos_dp_reg.c
>> @@ -0,0 +1,1245 @@
>> +/*
>> + * Samsung DP (Display port) register interface driver.
>> + *
>> + * Copyright (C) 2012 Samsung Electronics Co., Ltd.
>> + * Author: Jingoo Han <jg1.han@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/io.h>
>> +#include <linux/delay.h>
>> +
>> +#include <video/exynos_dp.h>
>> +
>> +#include "exynos_dp_core.h"
>> +#include "exynos_dp_reg.h"
>> +
>> +#define COMMON_INT_MASK_1 0
>> +#define COMMON_INT_MASK_2 0
>> +#define COMMON_INT_MASK_3 0
>> +#define COMMON_INT_MASK_4 (HOTPLUG_CHG | HPD_LOST | PLUG)
>> +#define INT_STA_MASK INT_HPD
>> +
>> +void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool
> enable)
>> +{
>> + u32 reg;
>> +
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> + reg |= HDCP_VIDEO_MUTE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> + reg &= ~HDCP_VIDEO_MUTE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> + }
>> +}
>> +
>> +void exynos_dp_stop_video(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> + reg &= ~VIDEO_EN;
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> +}
>> +
>> +void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable)
>> +{
>> + u32 reg;
>> +
>> + if (enable)
>> + reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
>> + LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
>> + else
>> + reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
>> + LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
>> +
>> + writel(reg, dp->reg_base + EXYNOS_DP_LANE_MAP);
>> +}
>> +
>> +void exynos_dp_init_analog_param(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = TX_TERMINAL_CTRL_50_OHM;
>> + writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_1);
>> +
>> + reg = SEL_24M | TX_DVDD_BIT_1_0625V;
>> + writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_2);
>> +
>> + reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
>> + writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_3);
>> +
>> + reg = PD_RING_OSC | AUX_TERMINAL_CTRL_50_OHM |
>> + TX_CUR1_2X | TX_CUR_16_MA;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PLL_FILTER_CTL_1);
>> +
>> + reg = CH3_AMP_400_MV | CH2_AMP_400_MV |
>> + CH1_AMP_400_MV | CH0_AMP_400_MV;
>> + writel(reg, dp->reg_base + EXYNOS_DP_TX_AMP_TUNING_CTL);
>> +}
>> +
>> +void exynos_dp_init_interrupt(struct exynos_dp_device *dp)
>> +{
>> + /* Set interrupt pin assertion polarity as high */
>> + writel(INT_POL1 | INT_POL0, dp->reg_base + EXYNOS_DP_INT_CTL);
>> +
>> + /* Clear pending regisers */
>> + writel(0xff, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
>> + writel(0x4f, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_2);
>> + writel(0xe0, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_3);
>> + writel(0xe7, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
>> + writel(0x63, dp->reg_base + EXYNOS_DP_INT_STA);
>> +
>> + /* 0:mask,1: unmask */
>> + writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
>> + writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
>> + writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
>> + writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
>> + writel(0x00, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
>> +}
>> +
>> +void exynos_dp_reset(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + exynos_dp_stop_video(dp);
>> + exynos_dp_enable_video_mute(dp, 0);
>> +
>> + reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
>> + AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
>> + HDCP_FUNC_EN_N | SW_FUNC_EN_N;
>> + writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> +
>> + reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
>> + SERDES_FIFO_FUNC_EN_N |
>> + LS_CLK_DOMAIN_FUNC_EN_N;
>> + writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> +
>> + usleep_range(20, 30);
>> +
>> + exynos_dp_lane_swap(dp, 0);
>> +
>> + writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> + writel(0x40, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> + writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> + writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> +
>> + writel(0x0, dp->reg_base + EXYNOS_DP_PKT_SEND_CTL);
>> + writel(0x0, dp->reg_base + EXYNOS_DP_HDCP_CTL);
>> +
>> + writel(0x5e, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_L);
>> + writel(0x1a, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_H);
>> +
>> + writel(0x10, dp->reg_base + EXYNOS_DP_LINK_DEBUG_CTL);
>> +
>> + writel(0x0, dp->reg_base + EXYNOS_DP_PHY_TEST);
>> +
>> + writel(0x0, dp->reg_base + EXYNOS_DP_VIDEO_FIFO_THRD);
>> + writel(0x20, dp->reg_base + EXYNOS_DP_AUDIO_MARGIN);
>> +
>> + writel(0x4, dp->reg_base + EXYNOS_DP_M_VID_GEN_FILTER_TH);
>> + writel(0x2, dp->reg_base + EXYNOS_DP_M_AUD_GEN_FILTER_TH);
>> +
>> + writel(0x00000101, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> +}
>> +
>> +void exynos_dp_swreset(struct exynos_dp_device *dp)
>> +{
>> + writel(RESET_DP_TX, dp->reg_base + EXYNOS_DP_TX_SW_RESET);
>> +}
>> +
>> +void exynos_dp_config_interrupt(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + /* 0: mask, 1: unmask */
>> + reg = COMMON_INT_MASK_1;
>> + writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
>> +
>> + reg = COMMON_INT_MASK_2;
>> + writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
>> +
>> + reg = COMMON_INT_MASK_3;
>> + writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
>> +
>> + reg = COMMON_INT_MASK_4;
>> + writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
>> +
>> + reg = INT_STA_MASK;
>> + writel(reg, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
>> +}
>> +
>> +enum pll_status exynos_dp_get_pll_lock_status(struct exynos_dp_device
> *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
>> + if (reg & PLL_LOCK)
>> + return PLL_LOCKED;
>> + else
>> + return PLL_UNLOCKED;
>> +}
>> +
>> +void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool
>> enable)
>> +{
>> + u32 reg;
>> +
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
>> + reg |= DP_PLL_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
>> + reg &= ~DP_PLL_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
>> + }
>> +}
>> +
>> +void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
>> + enum analog_power_block block,
>> + bool enable)
>> +{
>> + u32 reg;
>> +
>> + switch (block) {
>> + case AUX_BLOCK:
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg |= AUX_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg &= ~AUX_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + }
>> + break;
>> + case CH0_BLOCK:
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg |= CH0_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg &= ~CH0_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + }
>> + break;
>> + case CH1_BLOCK:
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg |= CH1_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg &= ~CH1_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + }
>> + break;
>> + case CH2_BLOCK:
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg |= CH2_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg &= ~CH2_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + }
>> + break;
>> + case CH3_BLOCK:
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg |= CH3_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg &= ~CH3_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + }
>> + break;
>> + case ANALOG_TOTAL:
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg |= DP_PHY_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> + reg &= ~DP_PHY_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + }
>> + break;
>> + case POWER_ALL:
>> + if (enable) {
>> + reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
>> + CH1_PD | CH0_PD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + } else {
>> + writel(0x00, dp->reg_base + EXYNOS_DP_PHY_PD);
>> + }
>> + break;
>> + default:
>> + break;
>> + }
>> +}
>> +
>> +void exynos_dp_init_analog_func(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> + int timeout_loop = 0;
>> +
>> + exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
>> +
>> + reg = PLL_LOCK_CHG;
>> + writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
>> + reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
>> + writel(reg, dp->reg_base + EXYNOS_DP_DEBUG_CTL);
>> +
>> + /* Power up PLL */
>> + if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> + exynos_dp_set_pll_power_down(dp, 0);
>> +
>> + while (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> + timeout_loop++;
>> + if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> + dev_err(dp->dev, "failed to get pll lock
>> status\n");
>> + return;
>> + }
>> + usleep_range(10, 20);
>> + }
>> + }
>> +
>> + /* Enable Serdes FIFO function and Link symbol clock domain module
>> */
>> + reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> + reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
>> + | AUX_FUNC_EN_N);
>> + writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> +}
>> +
>> +void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = HOTPLUG_CHG | HPD_LOST | PLUG;
>> + writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
>> +
>> + reg = INT_HPD;
>> + writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
>> +}
>> +
>> +void exynos_dp_init_hpd(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + exynos_dp_clear_hotplug_interrupts(dp);
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> + reg &= ~(F_HPD | HPD_CTRL);
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> +}
>> +
>> +enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + /* Parse hotplug interrupt status register */
>> + reg = readl(dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
>> +
>> + if (reg & PLUG)
>> + return DP_IRQ_TYPE_HP_CABLE_IN;
>> +
>> + if (reg & HPD_LOST)
>> + return DP_IRQ_TYPE_HP_CABLE_OUT;
>> +
>> + if (reg & HOTPLUG_CHG)
>> + return DP_IRQ_TYPE_HP_CHANGE;
>> +
>> + return DP_IRQ_TYPE_UNKNOWN;
>> +}
>> +
>> +void exynos_dp_reset_aux(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + /* Disable AUX channel module */
>> + reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> + reg |= AUX_FUNC_EN_N;
>> + writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> +}
>> +
>> +void exynos_dp_init_aux(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + /* Clear inerrupts related to AUX channel */
>> + reg = RPLY_RECEIV | AUX_ERR;
>> + writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
>> +
>> + exynos_dp_reset_aux(dp);
>> +
>> + /* Disable AUX transaction H/W retry */
>> + reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0)|
>> + AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_HW_RETRY_CTL) ;
>> +
>> + /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
>> + reg = DEFER_CTRL_EN | DEFER_COUNT(1);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_DEFER_CTL);
>> +
>> + /* Enable AUX channel module */
>> + reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> + reg &= ~AUX_FUNC_EN_N;
>> + writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> +}
>> +
>> +int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> + if (reg & HPD_STATUS)
>> + return 0;
>> +
>> + return -EINVAL;
>> +}
>> +
>> +void exynos_dp_enable_sw_function(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> + reg &= ~SW_FUNC_EN_N;
>> + writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> +}
>> +
>> +int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp)
>> +{
>> + int reg;
>> + int retval = 0;
>> + int timeout_loop = 0;
>> +
>> + /* Enable AUX CH operation */
>> + reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
>> + reg |= AUX_EN;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
>> +
>> + /* Is AUX CH command reply received? */
>> + reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
>> + while (!(reg & RPLY_RECEIV)) {
>> + timeout_loop++;
>> + if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> + dev_err(dp->dev, "AUX CH command reply failed!\n");
>> + return -ETIMEDOUT;
>> + }
>> + reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
>> + usleep_range(10, 11);
>> + }
>> +
>> + /* Clear interrupt source for AUX CH command reply */
>> + writel(RPLY_RECEIV, dp->reg_base + EXYNOS_DP_INT_STA);
>> +
>> + /* Clear interrupt source for AUX CH access error */
>> + reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
>> + if (reg & AUX_ERR) {
>> + writel(AUX_ERR, dp->reg_base + EXYNOS_DP_INT_STA);
>> + return -EREMOTEIO;
>> + }
>> +
>> + /* Check AUX CH error access status */
>> + reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_STA);
>> + if ((reg & AUX_STATUS_MASK) != 0) {
>> + dev_err(dp->dev, "AUX CH error happens: %d\n\n",
>> + reg & AUX_STATUS_MASK);
>> + return -EREMOTEIO;
>> + }
>> +
>> + return retval;
>> +}
>> +
>> +int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
>> + unsigned int reg_addr,
>> + unsigned char data)
>> +{
>> + u32 reg;
>> + int i;
>> + int retval;
>> +
>> + for (i = 0; i < 3; i++) {
>> + /* Clear AUX CH data buffer */
>> + reg = BUF_CLR;
>> + writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> +
>> + /* Select DPCD device address */
>> + reg = AUX_ADDR_7_0(reg_addr);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> + reg = AUX_ADDR_15_8(reg_addr);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> + reg = AUX_ADDR_19_16(reg_addr);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
>> +
>> + /* Write data buffer */
>> + reg = (unsigned int)data;
>> + writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
>> +
>> + /*
>> + * Set DisplayPort transaction and write 1 byte
>> + * If bit 3 is 1, DisplayPort transaction.
>> + * If Bit 3 is 0, I2C transaction.
>> + */
>> + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> +
>> + /* Start AUX transaction */
>> + retval = exynos_dp_start_aux_transaction(dp);
>> + if (retval == 0)
>> + break;
>> + else
>> + dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
>> + __func__);
>> + }
>> +
>> + return retval;
>> +}
>> +
>> +int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
>> + unsigned int reg_addr,
>> + unsigned char *data)
>> +{
>> + u32 reg;
>> + int i;
>> + int retval;
>> +
>> + for (i = 0; i < 3; i++) {
>> + /* Clear AUX CH data buffer */
>> + reg = BUF_CLR;
>> + writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> +
>> + /* Select DPCD device address */
>> + reg = AUX_ADDR_7_0(reg_addr);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> + reg = AUX_ADDR_15_8(reg_addr);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> + reg = AUX_ADDR_19_16(reg_addr);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
>> +
>> + /*
>> + * Set DisplayPort transaction and read 1 byte
>> + * If bit 3 is 1, DisplayPort transaction.
>> + * If Bit 3 is 0, I2C transaction.
>> + */
>> + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> +
>> + /* Start AUX transaction */
>> + retval = exynos_dp_start_aux_transaction(dp);
>> + if (retval == 0)
>> + break;
>> + else
>> + dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
>> + __func__);
>> + }
>> +
>> + /* Read data buffer */
>> + reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
>> + *data = (unsigned char)(reg & 0xff);
>> +
>> + return retval;
>> +}
>> +
>> +int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
>> + unsigned int reg_addr,
>> + unsigned int count,
>> + unsigned char data[])
>> +{
>> + u32 reg;
>> + unsigned int start_offset;
>> + unsigned int cur_data_count;
>> + unsigned int cur_data_idx;
>> + int i;
>> + int retval = 0;
>> +
>> + /* Clear AUX CH data buffer */
>> + reg = BUF_CLR;
>> + writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> +
>> + start_offset = 0;
>> + while (start_offset < count) {
>> + /* Buffer size of AUX CH is 16 * 4bytes */
>> + if ((count - start_offset) > 16)
>> + cur_data_count = 16;
>> + else
>> + cur_data_count = count - start_offset;
>> +
>> + for (i = 0; i < 3; i++) {
>> + /* Select DPCD device address */
>> + reg = AUX_ADDR_7_0(reg_addr + start_offset);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> + reg = AUX_ADDR_15_8(reg_addr + start_offset);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> + reg = AUX_ADDR_19_16(reg_addr + start_offset);
>> + writel(reg, dp->reg_base +
> EXYNOS_DP_AUX_ADDR_19_16);
>> +
>> + for (cur_data_idx = 0; cur_data_idx <
> cur_data_count;
>> + cur_data_idx++) {
>> + reg = data[start_offset + cur_data_idx];
>> + writel(reg, dp->reg_base +
> EXYNOS_DP_BUF_DATA_0
>> + + 4 *
> cur_data_idx);
>> + }
>> +
>> + /*
>> + * Set DisplayPort transaction and write
>> + * If bit 3 is 1, DisplayPort transaction.
>> + * If Bit 3 is 0, I2C transaction.
>> + */
>> + reg = AUX_LENGTH(cur_data_count) |
>> + AUX_TX_COMM_DP_TRANSACTION |
> AUX_TX_COMM_WRITE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> +
>> + /* Start AUX transaction */
>> + retval = exynos_dp_start_aux_transaction(dp);
>> + if (retval == 0)
>> + break;
>> + else
>> + dev_dbg(dp->dev, "%s: Aux Transaction
> fail!\n",
>> + __func__);
>> + }
>> +
>> + start_offset += cur_data_count;
>> + }
>> +
>> + return retval;
>> +}
>> +
>> +int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
>> + unsigned int reg_addr,
>> + unsigned int count,
>> + unsigned char data[])
>> +{
>> + u32 reg;
>> + unsigned int start_offset;
>> + unsigned int cur_data_count;
>> + unsigned int cur_data_idx;
>> + int i;
>> + int retval = 0;
>> +
>> + /* Clear AUX CH data buffer */
>> + reg = BUF_CLR;
>> + writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> +
>> + start_offset = 0;
>> + while (start_offset < count) {
>> + /* Buffer size of AUX CH is 16 * 4bytes */
>> + if ((count - start_offset) > 16)
>> + cur_data_count = 16;
>> + else
>> + cur_data_count = count - start_offset;
>> +
>> + /* AUX CH Request Transaction process */
>> + for (i = 0; i < 3; i++) {
>> + /* Select DPCD device address */
>> + reg = AUX_ADDR_7_0(reg_addr + start_offset);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> + reg = AUX_ADDR_15_8(reg_addr + start_offset);
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> + reg = AUX_ADDR_19_16(reg_addr + start_offset);
>> + writel(reg, dp->reg_base +
> EXYNOS_DP_AUX_ADDR_19_16);
>> +
>> + /*
>> + * Set DisplayPort transaction and read
>> + * If bit 3 is 1, DisplayPort transaction.
>> + * If Bit 3 is 0, I2C transaction.
>> + */
>> + reg = AUX_LENGTH(cur_data_count) |
>> + AUX_TX_COMM_DP_TRANSACTION |
> AUX_TX_COMM_READ;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> +
>> + /* Start AUX transaction */
>> + retval = exynos_dp_start_aux_transaction(dp);
>> + if (retval == 0)
>> + break;
>> + else
>> + dev_dbg(dp->dev, "%s: Aux Transaction
> fail!\n",
>> + __func__);
>> + }
>> +
>> + for (cur_data_idx = 0; cur_data_idx < cur_data_count;
>> + cur_data_idx++) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
>> + + 4 * cur_data_idx);
>> + data[start_offset + cur_data_idx] =
>> + (unsigned char)reg;
>> + }
>> +
>> + start_offset += cur_data_count;
>> + }
>> +
>> + return retval;
>> +}
>> +
>> +int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
>> + unsigned int device_addr,
>> + unsigned int reg_addr)
>> +{
>> + u32 reg;
>> + int retval;
>> +
>> + /* Set EDID device address */
>> + reg = device_addr;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> + writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> + writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
>> +
>> + /* Set offset from base address of EDID device */
>> + writel(reg_addr, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
>> +
>> + /*
>> + * Set I2C transaction and write address
>> + * If bit 3 is 1, DisplayPort transaction.
>> + * If Bit 3 is 0, I2C transaction.
>> + */
>> + reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
>> + AUX_TX_COMM_WRITE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> +
>> + /* Start AUX transaction */
>> + retval = exynos_dp_start_aux_transaction(dp);
>> + if (retval != 0)
>> + dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
>> +
>> + return retval;
>> +}
>> +
>> +int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
>> + unsigned int device_addr,
>> + unsigned int reg_addr,
>> + unsigned int *data)
>> +{
>> + u32 reg;
>> + int i;
>> + int retval;
>> +
>> + for (i = 0; i < 3; i++) {
>> + /* Clear AUX CH data buffer */
>> + reg = BUF_CLR;
>> + writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> +
>> + /* Select EDID device */
>> + retval = exynos_dp_select_i2c_device(dp, device_addr,
>> reg_addr);
>> + if (retval != 0)
>> + continue;
>> +
>> + /*
>> + * Set I2C transaction and read data
>> + * If bit 3 is 1, DisplayPort transaction.
>> + * If Bit 3 is 0, I2C transaction.
>> + */
>> + reg = AUX_TX_COMM_I2C_TRANSACTION |
>> + AUX_TX_COMM_READ;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> +
>> + /* Start AUX transaction */
>> + retval = exynos_dp_start_aux_transaction(dp);
>> + if (retval == 0)
>> + break;
>> + else
>> + dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
>> + __func__);
>> + }
>> +
>> + /* Read data */
>> + if (retval == 0)
>> + *data = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
>> +
>> + return retval;
>> +}
>> +
>> +int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
>> + unsigned int device_addr,
>> + unsigned int reg_addr,
>> + unsigned int count,
>> + unsigned char edid[])
>> +{
>> + u32 reg;
>> + unsigned int i, j;
>> + unsigned int cur_data_idx;
>> + unsigned int defer = 0;
>> + int retval = 0;
>> +
>> + for (i = 0; i < count; i += 16) {
>> + for (j = 0; j < 3; j++) {
>> + /* Clear AUX CH data buffer */
>> + reg = BUF_CLR;
>> + writel(reg, dp->reg_base +
> EXYNOS_DP_BUFFER_DATA_CTL);
>> +
>> + /* Set normal AUX CH command */
>> + reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
>> + reg &= ~ADDR_ONLY;
>> + writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
>> +
>> + /*
>> + * If Rx sends defer, Tx sends only reads
>> + * request without sending address
>> + */
>> + if (!defer)
>> + retval = exynos_dp_select_i2c_device(dp,
>> + device_addr, reg_addr + i);
>> + else
>> + defer = 0;
>> +
>> + if (retval == 0) {
>> + /*
>> + * Set I2C transaction and write data
>> + * If bit 3 is 1, DisplayPort transaction.
>> + * If Bit 3 is 0, I2C transaction.
>> + */
>> + reg = AUX_LENGTH(16) |
>> + AUX_TX_COMM_I2C_TRANSACTION |
>> + AUX_TX_COMM_READ;
>> + writel(reg, dp->reg_base +
>> + EXYNOS_DP_AUX_CH_CTL_1);
>> +
>> + /* Start AUX transaction */
>> + retval =
> exynos_dp_start_aux_transaction(dp);
>> + if (retval == 0)
>> + break;
>> + else
>> + dev_dbg(dp->dev,
>> + "%s: Aux Transaction
> fail!\n",
>> + __func__);
>> + }
>> + /* Check if Rx sends defer */
>> + reg = readl(dp->reg_base + EXYNOS_DP_AUX_RX_COMM);
>> + if (reg == AUX_RX_COMM_AUX_DEFER ||
>> + reg == AUX_RX_COMM_I2C_DEFER) {
>> + dev_err(dp->dev, "Defer: %d\n\n", reg);
>> + defer = 1;
>> + }
>> + }
>> +
>> + for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
>> + + 4 * cur_data_idx);
>> + edid[i + cur_data_idx] = (unsigned char)reg;
>> + }
>> + }
>> +
>> + return retval;
>> +}
>> +
>> +void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32
> bwtype)
>> +{
>> + u32 reg;
>> +
>> + reg = bwtype;
>> + if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype ==
>> LINK_RATE_1_62GBPS))
>> + writel(reg, dp->reg_base + EXYNOS_DP_LINK_BW_SET);
>> +}
>> +
>> +void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32
>> *bwtype)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LINK_BW_SET);
>> + *bwtype = reg;
>> +}
>> +
>> +void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count)
>> +{
>> + u32 reg;
>> +
>> + reg = count;
>> + writel(reg, dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
>> +}
>> +
>> +void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
>> + *count = reg;
>> +}
>> +
>> +void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool
>> enable)
>> +{
>> + u32 reg;
>> +
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> + reg |= ENHANCED;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> + reg &= ~ENHANCED;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> + }
>> +}
>> +
>> +void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
>> + enum pattern_set pattern)
>> +{
>> + u32 reg;
>> +
>> + switch (pattern) {
>> + case PRBS7:
>> + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
>> + writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> + break;
>> + case D10_2:
>> + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
>> + writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> + break;
>> + case TRAINING_PTN1:
>> + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
>> + writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> + break;
>> + case TRAINING_PTN2:
>> + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
>> + writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> + break;
>> + case DP_NONE:
>> + reg = SCRAMBLING_ENABLE |
>> + LINK_QUAL_PATTERN_SET_DISABLE |
>> + SW_TRAINING_PATTERN_SET_NORMAL;
>> + writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> + break;
>> + default:
>> + break;
>> + }
>> +}
>> +
>> +void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32
>> level)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
>> + reg &= ~PRE_EMPHASIS_SET_MASK;
>> + reg |= level << PRE_EMPHASIS_SET_SHIFT;
>> + writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
>> +}
>> +
>> +void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32
>> level)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
>> + reg &= ~PRE_EMPHASIS_SET_MASK;
>> + reg |= level << PRE_EMPHASIS_SET_SHIFT;
>> + writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
>> +}
>> +
>> +void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32
>> level)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
>> + reg &= ~PRE_EMPHASIS_SET_MASK;
>> + reg |= level << PRE_EMPHASIS_SET_SHIFT;
>> + writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
>> +}
>> +
>> +void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32
>> level)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
>> + reg &= ~PRE_EMPHASIS_SET_MASK;
>> + reg |= level << PRE_EMPHASIS_SET_SHIFT;
>> + writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
>> +}
>> +
>> +void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
>> + u32 training_lane)
>> +{
>> + u32 reg;
>> +
>> + reg = training_lane;
>> + writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
>> +}
>> +
>> +void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
>> + u32 training_lane)
>> +{
>> + u32 reg;
>> +
>> + reg = training_lane;
>> + writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
>> +}
>> +
>> +void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
>> + u32 training_lane)
>> +{
>> + u32 reg;
>> +
>> + reg = training_lane;
>> + writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
>> +}
>> +
>> +void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
>> + u32 training_lane)
>> +{
>> + u32 reg;
>> +
>> + reg = training_lane;
>> + writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
>> +}
>> +
>> +u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
>> + return reg;
>> +}
>> +
>> +u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
>> + return reg;
>> +}
>> +
>> +u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
>> + return reg;
>> +}
>> +
>> +u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
>> + return reg;
>> +}
>> +
>> +void exynos_dp_reset_macro(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_PHY_TEST);
>> + reg |= MACRO_RST;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
>> +
>> + /* 10 us is the minimum reset time. */
>> + usleep_range(10, 20);
>> +
>> + reg &= ~MACRO_RST;
>> + writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
>> +}
>> +
>> +void exynos_dp_init_video(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
>> + writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
>> +
>> + reg = 0x0;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> +
>> + reg = CHA_CRI(4) | CHA_CTRL;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> +
>> + reg = 0x0;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> +
>> + reg = VID_HRES_TH(2) | VID_VRES_TH(0);
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_8);
>> +}
>> +
>> +void exynos_dp_set_video_color_format(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + /* Configure the input color depth, color space, dynamic range */
>> + reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
>> + (dp->video_info->color_depth << IN_BPC_SHIFT) |
>> + (dp->video_info->color_space << IN_COLOR_F_SHIFT);
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_2);
>> +
>> + /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
>> + reg &= ~IN_YC_COEFFI_MASK;
>> + if (dp->video_info->ycbcr_coeff)
>> + reg |= IN_YC_COEFFI_ITU709;
>> + else
>> + reg |= IN_YC_COEFFI_ITU601;
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
>> +}
>> +
>> +int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> +
>> + if (!(reg & DET_STA)) {
>> + dev_dbg(dp->dev, "Input stream clock not detected.\n");
>> + return -EINVAL;
>> + }
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> + dev_dbg(dp->dev, "wait SYS_CTL_2.\n");
>> +
>> + if (reg & CHA_STA) {
>> + dev_dbg(dp->dev, "Input stream clk is changing\n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
>> + enum clock_recovery_m_value_type type,
>> + u32 m_value,
>> + u32 n_value)
>> +{
>> + u32 reg;
>> +
>> + if (type == REGISTER_M) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> + reg |= FIX_M_VID;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> + reg = m_value & 0xff;
>> + writel(reg, dp->reg_base + EXYNOS_DP_M_VID_0);
>> + reg = (m_value >> 8) & 0xff;
>> + writel(reg, dp->reg_base + EXYNOS_DP_M_VID_1);
>> + reg = (m_value >> 16) & 0xff;
>> + writel(reg, dp->reg_base + EXYNOS_DP_M_VID_2);
>> +
>> + reg = n_value & 0xff;
>> + writel(reg, dp->reg_base + EXYNOS_DP_N_VID_0);
>> + reg = (n_value >> 8) & 0xff;
>> + writel(reg, dp->reg_base + EXYNOS_DP_N_VID_1);
>> + reg = (n_value >> 16) & 0xff;
>> + writel(reg, dp->reg_base + EXYNOS_DP_N_VID_2);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> + reg &= ~FIX_M_VID;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> +
>> + writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_0);
>> + writel(0x80, dp->reg_base + EXYNOS_DP_N_VID_1);
>> + writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_2);
>> + }
>> +}
>> +
>> +void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32
>> type)
>> +{
>> + u32 reg;
>> +
>> + if (type == VIDEO_TIMING_FROM_CAPTURE) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> + reg &= ~FORMAT_SEL;
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> + reg |= FORMAT_SEL;
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> + }
>> +}
>> +
>> +void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool
>> enable)
>> +{
>> + u32 reg;
>> +
>> + if (enable) {
>> + reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> + reg &= ~VIDEO_MODE_MASK;
>> + reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> + } else {
>> + reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> + reg &= ~VIDEO_MODE_MASK;
>> + reg |= VIDEO_MODE_SLAVE_MODE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> + }
>> +}
>> +
>> +void exynos_dp_start_video(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> + reg |= VIDEO_EN;
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> +}
>> +
>> +int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> + writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> + if (!(reg & STRM_VALID)) {
>> + dev_dbg(dp->dev, "Input video stream is not detected.\n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> + reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
>> + reg |= MASTER_VID_FUNC_EN_N;
>> + writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> + reg &= ~INTERACE_SCAN_CFG;
>> + reg |= (dp->video_info->interlaced << 2);
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> + reg &= ~VSYNC_POLARITY_CFG;
>> + reg |= (dp->video_info->v_sync_polarity << 1);
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> + reg &= ~HSYNC_POLARITY_CFG;
>> + reg |= (dp->video_info->h_sync_polarity << 0);
>> + writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> +
>> + reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> +}
>> +
>> +void exynos_dp_enable_scrambling(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> + reg &= ~SCRAMBLING_DISABLE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> +}
>> +
>> +void exynos_dp_disable_scrambling(struct exynos_dp_device *dp)
>> +{
>> + u32 reg;
>> +
>> + reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> + reg |= SCRAMBLING_DISABLE;
>> + writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> +}
>> diff --git a/drivers/gpu/drm/exynos/exynos_dp_reg.h
>> b/drivers/gpu/drm/exynos/exynos_dp_reg.h
>> new file mode 100644
>> index 0000000..2e9bd0e
>> --- /dev/null
>> +++ b/drivers/gpu/drm/exynos/exynos_dp_reg.h
>> @@ -0,0 +1,366 @@
>> +/*
>> + * Register definition file for Samsung DP driver
>> + *
>> + * Copyright (C) 2012 Samsung Electronics Co., Ltd.
>> + * Author: Jingoo Han <jg1.han@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#ifndef _EXYNOS_DP_REG_H
>> +#define _EXYNOS_DP_REG_H
>> +
>> +#define EXYNOS_DP_TX_SW_RESET 0x14
>> +#define EXYNOS_DP_FUNC_EN_1 0x18
>> +#define EXYNOS_DP_FUNC_EN_2 0x1C
>> +#define EXYNOS_DP_VIDEO_CTL_1 0x20
>> +#define EXYNOS_DP_VIDEO_CTL_2 0x24
>> +#define EXYNOS_DP_VIDEO_CTL_3 0x28
>> +
>> +#define EXYNOS_DP_VIDEO_CTL_8 0x3C
>> +#define EXYNOS_DP_VIDEO_CTL_10 0x44
>> +
>> +#define EXYNOS_DP_LANE_MAP 0x35C
>> +
>> +#define EXYNOS_DP_ANALOG_CTL_1 0x370
>> +#define EXYNOS_DP_ANALOG_CTL_2 0x374
>> +#define EXYNOS_DP_ANALOG_CTL_3 0x378
>> +#define EXYNOS_DP_PLL_FILTER_CTL_1 0x37C
>> +#define EXYNOS_DP_TX_AMP_TUNING_CTL 0x380
>> +
>> +#define EXYNOS_DP_AUX_HW_RETRY_CTL 0x390
>> +
>> +#define EXYNOS_DP_COMMON_INT_STA_1 0x3C4
>> +#define EXYNOS_DP_COMMON_INT_STA_2 0x3C8
>> +#define EXYNOS_DP_COMMON_INT_STA_3 0x3CC
>> +#define EXYNOS_DP_COMMON_INT_STA_4 0x3D0
>> +#define EXYNOS_DP_INT_STA 0x3DC
>> +#define EXYNOS_DP_COMMON_INT_MASK_1 0x3E0
>> +#define EXYNOS_DP_COMMON_INT_MASK_2 0x3E4
>> +#define EXYNOS_DP_COMMON_INT_MASK_3 0x3E8
>> +#define EXYNOS_DP_COMMON_INT_MASK_4 0x3EC
>> +#define EXYNOS_DP_INT_STA_MASK 0x3F8
>> +#define EXYNOS_DP_INT_CTL 0x3FC
>> +
>> +#define EXYNOS_DP_SYS_CTL_1 0x600
>> +#define EXYNOS_DP_SYS_CTL_2 0x604
>> +#define EXYNOS_DP_SYS_CTL_3 0x608
>> +#define EXYNOS_DP_SYS_CTL_4 0x60C
>> +
>> +#define EXYNOS_DP_PKT_SEND_CTL 0x640
>> +#define EXYNOS_DP_HDCP_CTL 0x648
>> +
>> +#define EXYNOS_DP_LINK_BW_SET 0x680
>> +#define EXYNOS_DP_LANE_COUNT_SET 0x684
>> +#define EXYNOS_DP_TRAINING_PTN_SET 0x688
>> +#define EXYNOS_DP_LN0_LINK_TRAINING_CTL 0x68C
>> +#define EXYNOS_DP_LN1_LINK_TRAINING_CTL 0x690
>> +#define EXYNOS_DP_LN2_LINK_TRAINING_CTL 0x694
>> +#define EXYNOS_DP_LN3_LINK_TRAINING_CTL 0x698
>> +
>> +#define EXYNOS_DP_DEBUG_CTL 0x6C0
>> +#define EXYNOS_DP_HPD_DEGLITCH_L 0x6C4
>> +#define EXYNOS_DP_HPD_DEGLITCH_H 0x6C8
>> +#define EXYNOS_DP_LINK_DEBUG_CTL 0x6E0
>> +
>> +#define EXYNOS_DP_M_VID_0 0x700
>> +#define EXYNOS_DP_M_VID_1 0x704
>> +#define EXYNOS_DP_M_VID_2 0x708
>> +#define EXYNOS_DP_N_VID_0 0x70C
>> +#define EXYNOS_DP_N_VID_1 0x710
>> +#define EXYNOS_DP_N_VID_2 0x714
>> +
>> +#define EXYNOS_DP_PLL_CTL 0x71C
>> +#define EXYNOS_DP_PHY_PD 0x720
>> +#define EXYNOS_DP_PHY_TEST 0x724
>> +
>> +#define EXYNOS_DP_VIDEO_FIFO_THRD 0x730
>> +#define EXYNOS_DP_AUDIO_MARGIN 0x73C
>> +
>> +#define EXYNOS_DP_M_VID_GEN_FILTER_TH 0x764
>> +#define EXYNOS_DP_M_AUD_GEN_FILTER_TH 0x778
>> +#define EXYNOS_DP_AUX_CH_STA 0x780
>> +#define EXYNOS_DP_AUX_CH_DEFER_CTL 0x788
>> +#define EXYNOS_DP_AUX_RX_COMM 0x78C
>> +#define EXYNOS_DP_BUFFER_DATA_CTL 0x790
>> +#define EXYNOS_DP_AUX_CH_CTL_1 0x794
>> +#define EXYNOS_DP_AUX_ADDR_7_0 0x798
>> +#define EXYNOS_DP_AUX_ADDR_15_8 0x79C
>> +#define EXYNOS_DP_AUX_ADDR_19_16 0x7A0
>> +#define EXYNOS_DP_AUX_CH_CTL_2 0x7A4
>> +
>> +#define EXYNOS_DP_BUF_DATA_0 0x7C0
>> +
>> +#define EXYNOS_DP_SOC_GENERAL_CTL 0x800
>> +
>> +/* EXYNOS_DP_TX_SW_RESET */
>> +#define RESET_DP_TX (0x1 << 0)
>> +
>> +/* EXYNOS_DP_FUNC_EN_1 */
>> +#define MASTER_VID_FUNC_EN_N (0x1 << 7)
>> +#define SLAVE_VID_FUNC_EN_N (0x1 << 5)
>> +#define AUD_FIFO_FUNC_EN_N (0x1 << 4)
>> +#define AUD_FUNC_EN_N (0x1 << 3)
>> +#define HDCP_FUNC_EN_N (0x1 << 2)
>> +#define CRC_FUNC_EN_N (0x1 << 1)
>> +#define SW_FUNC_EN_N (0x1 << 0)
>> +
>> +/* EXYNOS_DP_FUNC_EN_2 */
>> +#define SSC_FUNC_EN_N (0x1 << 7)
>> +#define AUX_FUNC_EN_N (0x1 << 2)
>> +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1)
>> +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0)
>> +
>> +/* EXYNOS_DP_VIDEO_CTL_1 */
>> +#define VIDEO_EN (0x1 << 7)
>> +#define HDCP_VIDEO_MUTE (0x1 << 6)
>> +
>> +/* EXYNOS_DP_VIDEO_CTL_1 */
>> +#define IN_D_RANGE_MASK (0x1 << 7)
>> +#define IN_D_RANGE_SHIFT (7)
>> +#define IN_D_RANGE_CEA (0x1 << 7)
>> +#define IN_D_RANGE_VESA (0x0 << 7)
>> +#define IN_BPC_MASK (0x7 << 4)
>> +#define IN_BPC_SHIFT (4)
>> +#define IN_BPC_12_BITS (0x3 << 4)
>> +#define IN_BPC_10_BITS (0x2 << 4)
>> +#define IN_BPC_8_BITS (0x1 << 4)
>> +#define IN_BPC_6_BITS (0x0 << 4)
>> +#define IN_COLOR_F_MASK (0x3 << 0)
>> +#define IN_COLOR_F_SHIFT (0)
>> +#define IN_COLOR_F_YCBCR444 (0x2 << 0)
>> +#define IN_COLOR_F_YCBCR422 (0x1 << 0)
>> +#define IN_COLOR_F_RGB (0x0 << 0)
>> +
>> +/* EXYNOS_DP_VIDEO_CTL_3 */
>> +#define IN_YC_COEFFI_MASK (0x1 << 7)
>> +#define IN_YC_COEFFI_SHIFT (7)
>> +#define IN_YC_COEFFI_ITU709 (0x1 << 7)
>> +#define IN_YC_COEFFI_ITU601 (0x0 << 7)
>> +#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4)
>> +#define VID_CHK_UPDATE_TYPE_SHIFT (4)
>> +#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4)
>> +#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
>> +
>> +/* EXYNOS_DP_VIDEO_CTL_8 */
>> +#define VID_HRES_TH(x) (((x) & 0xf) << 4)
>> +#define VID_VRES_TH(x) (((x) & 0xf) << 0)
>> +
>> +/* EXYNOS_DP_VIDEO_CTL_10 */
>> +#define FORMAT_SEL (0x1 << 4)
>> +#define INTERACE_SCAN_CFG (0x1 << 2)
>> +#define VSYNC_POLARITY_CFG (0x1 << 1)
>> +#define HSYNC_POLARITY_CFG (0x1 << 0)
>> +
>> +/* EXYNOS_DP_LANE_MAP */
>> +#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
>> +#define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
>> +#define LANE3_MAP_LOGIC_LANE_2 (0x2 << 6)
>> +#define LANE3_MAP_LOGIC_LANE_3 (0x3 << 6)
>> +#define LANE2_MAP_LOGIC_LANE_0 (0x0 << 4)
>> +#define LANE2_MAP_LOGIC_LANE_1 (0x1 << 4)
>> +#define LANE2_MAP_LOGIC_LANE_2 (0x2 << 4)
>> +#define LANE2_MAP_LOGIC_LANE_3 (0x3 << 4)
>> +#define LANE1_MAP_LOGIC_LANE_0 (0x0 << 2)
>> +#define LANE1_MAP_LOGIC_LANE_1 (0x1 << 2)
>> +#define LANE1_MAP_LOGIC_LANE_2 (0x2 << 2)
>> +#define LANE1_MAP_LOGIC_LANE_3 (0x3 << 2)
>> +#define LANE0_MAP_LOGIC_LANE_0 (0x0 << 0)
>> +#define LANE0_MAP_LOGIC_LANE_1 (0x1 << 0)
>> +#define LANE0_MAP_LOGIC_LANE_2 (0x2 << 0)
>> +#define LANE0_MAP_LOGIC_LANE_3 (0x3 << 0)
>> +
>> +/* EXYNOS_DP_ANALOG_CTL_1 */
>> +#define TX_TERMINAL_CTRL_50_OHM (0x1 << 4)
>> +
>> +/* EXYNOS_DP_ANALOG_CTL_2 */
>> +#define SEL_24M (0x1 << 3)
>> +#define TX_DVDD_BIT_1_0625V (0x4 << 0)
>> +
>> +/* EXYNOS_DP_ANALOG_CTL_3 */
>> +#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5)
>> +#define VCO_BIT_600_MICRO (0x5 << 0)
>> +
>> +/* EXYNOS_DP_PLL_FILTER_CTL_1 */
>> +#define PD_RING_OSC (0x1 << 6)
>> +#define AUX_TERMINAL_CTRL_50_OHM (0x2 << 4)
>> +#define TX_CUR1_2X (0x1 << 2)
>> +#define TX_CUR_16_MA (0x3 << 0)
>> +
>> +/* EXYNOS_DP_TX_AMP_TUNING_CTL */
>> +#define CH3_AMP_400_MV (0x0 << 24)
>> +#define CH2_AMP_400_MV (0x0 << 16)
>> +#define CH1_AMP_400_MV (0x0 << 8)
>> +#define CH0_AMP_400_MV (0x0 << 0)
>> +
>> +/* EXYNOS_DP_AUX_HW_RETRY_CTL */
>> +#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8)
>> +#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3)
>> +#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3)
>> +#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3)
>> +#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3)
>> +#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3)
>> +#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0)
>> +
>> +/* EXYNOS_DP_COMMON_INT_STA_1 */
>> +#define VSYNC_DET (0x1 << 7)
>> +#define PLL_LOCK_CHG (0x1 << 6)
>> +#define SPDIF_ERR (0x1 << 5)
>> +#define SPDIF_UNSTBL (0x1 << 4)
>> +#define VID_FORMAT_CHG (0x1 << 3)
>> +#define AUD_CLK_CHG (0x1 << 2)
>> +#define VID_CLK_CHG (0x1 << 1)
>> +#define SW_INT (0x1 << 0)
>> +
>> +/* EXYNOS_DP_COMMON_INT_STA_2 */
>> +#define ENC_EN_CHG (0x1 << 6)
>> +#define HW_BKSV_RDY (0x1 << 3)
>> +#define HW_SHA_DONE (0x1 << 2)
>> +#define HW_AUTH_STATE_CHG (0x1 << 1)
>> +#define HW_AUTH_DONE (0x1 << 0)
>> +
>> +/* EXYNOS_DP_COMMON_INT_STA_3 */
>> +#define AFIFO_UNDER (0x1 << 7)
>> +#define AFIFO_OVER (0x1 << 6)
>> +#define R0_CHK_FLAG (0x1 << 5)
>> +
>> +/* EXYNOS_DP_COMMON_INT_STA_4 */
>> +#define PSR_ACTIVE (0x1 << 7)
>> +#define PSR_INACTIVE (0x1 << 6)
>> +#define SPDIF_BI_PHASE_ERR (0x1 << 5)
>> +#define HOTPLUG_CHG (0x1 << 2)
>> +#define HPD_LOST (0x1 << 1)
>> +#define PLUG (0x1 << 0)
>> +
>> +/* EXYNOS_DP_INT_STA */
>> +#define INT_HPD (0x1 << 6)
>> +#define HW_TRAINING_FINISH (0x1 << 5)
>> +#define RPLY_RECEIV (0x1 << 1)
>> +#define AUX_ERR (0x1 << 0)
>> +
>> +/* EXYNOS_DP_INT_CTL */
>> +#define SOFT_INT_CTRL (0x1 << 2)
>> +#define INT_POL1 (0x1 << 1)
>> +#define INT_POL0 (0x1 << 0)
>> +
>> +/* EXYNOS_DP_SYS_CTL_1 */
>> +#define DET_STA (0x1 << 2)
>> +#define FORCE_DET (0x1 << 1)
>> +#define DET_CTRL (0x1 << 0)
>> +
>> +/* EXYNOS_DP_SYS_CTL_2 */
>> +#define CHA_CRI(x) (((x) & 0xf) << 4)
>> +#define CHA_STA (0x1 << 2)
>> +#define FORCE_CHA (0x1 << 1)
>> +#define CHA_CTRL (0x1 << 0)
>> +
>> +/* EXYNOS_DP_SYS_CTL_3 */
>> +#define HPD_STATUS (0x1 << 6)
>> +#define F_HPD (0x1 << 5)
>> +#define HPD_CTRL (0x1 << 4)
>> +#define HDCP_RDY (0x1 << 3)
>> +#define STRM_VALID (0x1 << 2)
>> +#define F_VALID (0x1 << 1)
>> +#define VALID_CTRL (0x1 << 0)
>> +
>> +/* EXYNOS_DP_SYS_CTL_4 */
>> +#define FIX_M_AUD (0x1 << 4)
>> +#define ENHANCED (0x1 << 3)
>> +#define FIX_M_VID (0x1 << 2)
>> +#define M_VID_UPDATE_CTRL (0x3 << 0)
>> +
>> +/* EXYNOS_DP_TRAINING_PTN_SET */
>> +#define SCRAMBLER_TYPE (0x1 << 9)
>> +#define HW_LINK_TRAINING_PATTERN (0x1 << 8)
>> +#define SCRAMBLING_DISABLE (0x1 << 5)
>> +#define SCRAMBLING_ENABLE (0x0 << 5)
>> +#define LINK_QUAL_PATTERN_SET_MASK (0x3 << 2)
>> +#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2)
>> +#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2)
>> +#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2)
>> +#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0)
>> +#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0)
>> +#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0)
>> +#define SW_TRAINING_PATTERN_SET_NORMAL (0x0 << 0)
>> +
>> +/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */
>> +#define PRE_EMPHASIS_SET_MASK (0x3 << 3)
>> +#define PRE_EMPHASIS_SET_SHIFT (3)
>> +
>> +/* EXYNOS_DP_DEBUG_CTL */
>> +#define PLL_LOCK (0x1 << 4)
>> +#define F_PLL_LOCK (0x1 << 3)
>> +#define PLL_LOCK_CTRL (0x1 << 2)
>> +#define PN_INV (0x1 << 0)
>> +
>> +/* EXYNOS_DP_PLL_CTL */
>> +#define DP_PLL_PD (0x1 << 7)
>> +#define DP_PLL_RESET (0x1 << 6)
>> +#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4)
>> +#define DP_PLL_REF_BIT_1_1250V (0x5 << 0)
>> +#define DP_PLL_REF_BIT_1_2500V (0x7 << 0)
>> +
>> +/* EXYNOS_DP_PHY_PD */
>> +#define DP_PHY_PD (0x1 << 5)
>> +#define AUX_PD (0x1 << 4)
>> +#define CH3_PD (0x1 << 3)
>> +#define CH2_PD (0x1 << 2)
>> +#define CH1_PD (0x1 << 1)
>> +#define CH0_PD (0x1 << 0)
>> +
>> +/* EXYNOS_DP_PHY_TEST */
>> +#define MACRO_RST (0x1 << 5)
>> +#define CH1_TEST (0x1 << 1)
>> +#define CH0_TEST (0x1 << 0)
>> +
>> +/* EXYNOS_DP_AUX_CH_STA */
>> +#define AUX_BUSY (0x1 << 4)
>> +#define AUX_STATUS_MASK (0xf << 0)
>> +
>> +/* EXYNOS_DP_AUX_CH_DEFER_CTL */
>> +#define DEFER_CTRL_EN (0x1 << 7)
>> +#define DEFER_COUNT(x) (((x) & 0x7f) << 0)
>> +
>> +/* EXYNOS_DP_AUX_RX_COMM */
>> +#define AUX_RX_COMM_I2C_DEFER (0x2 << 2)
>> +#define AUX_RX_COMM_AUX_DEFER (0x2 << 0)
>> +
>> +/* EXYNOS_DP_BUFFER_DATA_CTL */
>> +#define BUF_CLR (0x1 << 7)
>> +#define BUF_DATA_COUNT(x) (((x) & 0x1f) << 0)
>> +
>> +/* EXYNOS_DP_AUX_CH_CTL_1 */
>> +#define AUX_LENGTH(x) (((x - 1) & 0xf) <<
> 4)
>> +#define AUX_TX_COMM_MASK (0xf << 0)
>> +#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3)
>> +#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3)
>> +#define AUX_TX_COMM_MOT (0x1 << 2)
>> +#define AUX_TX_COMM_WRITE (0x0 << 0)
>> +#define AUX_TX_COMM_READ (0x1 << 0)
>> +
>> +/* EXYNOS_DP_AUX_ADDR_7_0 */
>> +#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff)
>> +
>> +/* EXYNOS_DP_AUX_ADDR_15_8 */
>> +#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff)
>> +
>> +/* EXYNOS_DP_AUX_ADDR_19_16 */
>> +#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f)
>> +
>> +/* EXYNOS_DP_AUX_CH_CTL_2 */
>> +#define ADDR_ONLY (0x1 << 1)
>> +#define AUX_EN (0x1 << 0)
>> +
>> +/* EXYNOS_DP_SOC_GENERAL_CTL */
>> +#define AUDIO_MODE_SPDIF_MODE (0x1 << 8)
>> +#define AUDIO_MODE_MASTER_MODE (0x0 << 8)
>> +#define MASTER_VIDEO_INTERLACE_EN (0x1 << 4)
>> +#define VIDEO_MASTER_CLK_SEL (0x1 << 2)
>> +#define VIDEO_MASTER_MODE_EN (0x1 << 1)
>> +#define VIDEO_MODE_MASK (0x1 << 0)
>> +#define VIDEO_MODE_SLAVE_MODE (0x1 << 0)
>> +#define VIDEO_MODE_MASTER_MODE (0x0 << 0)
>> +
>> +#endif /* _EXYNOS_DP_REG_H */
>> diff --git a/drivers/video/exynos/Kconfig b/drivers/video/exynos/Kconfig
>> index 1b035b2..7032ad9 100644
>> --- a/drivers/video/exynos/Kconfig
>> +++ b/drivers/video/exynos/Kconfig
>> @@ -27,11 +27,4 @@ config EXYNOS_LCD_S6E8AX0
>> If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
>> LCD control driver.
>>
>> -config EXYNOS_DP
>> - bool "EXYNOS DP driver support"
>> - depends on ARCH_EXYNOS
>> - default n
>> - help
>> - This enables support for DP device.
>> -
>> endif # EXYNOS_VIDEO
>> diff --git a/drivers/video/exynos/Makefile b/drivers/video/exynos/Makefile
>> index ec7772e..b5b1bd2 100644
>> --- a/drivers/video/exynos/Makefile
>> +++ b/drivers/video/exynos/Makefile
>> @@ -5,4 +5,3 @@
>> obj-$(CONFIG_EXYNOS_MIPI_DSI) += exynos_mipi_dsi.o
>> exynos_mipi_dsi_common.o \
>> exynos_mipi_dsi_lowlevel.o
>> obj-$(CONFIG_EXYNOS_LCD_S6E8AX0) += s6e8ax0.o
>> -obj-$(CONFIG_EXYNOS_DP) += exynos_dp_core.o
>> exynos_dp_reg.o
>> diff --git a/drivers/video/exynos/exynos_dp_core.c
>> b/drivers/video/exynos/exynos_dp_core.c
>> deleted file mode 100644
>> index 089ae22..0000000
>> --- a/drivers/video/exynos/exynos_dp_core.c
>> +++ /dev/null
>> @@ -1,1213 +0,0 @@
>> -/*
>> - * Samsung SoC DP (Display Port) interface driver.
>> - *
>> - * Copyright (C) 2012 Samsung Electronics Co., Ltd.
>> - * Author: Jingoo Han <jg1.han@samsung.com>
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> it
>> - * under the terms of the GNU General Public License as published by the
>> - * Free Software Foundation; either version 2 of the License, or (at your
>> - * option) any later version.
>> - */
>> -
>> -#include <linux/module.h>
>> -#include <linux/platform_device.h>
>> -#include <linux/err.h>
>> -#include <linux/clk.h>
>> -#include <linux/io.h>
>> -#include <linux/interrupt.h>
>> -#include <linux/delay.h>
>> -#include <linux/of.h>
>> -
>> -#include <video/exynos_dp.h>
>> -
>> -#include "exynos_dp_core.h"
>> -
>> -static int exynos_dp_init_dp(struct exynos_dp_device *dp)
>> -{
>> - exynos_dp_reset(dp);
>> -
>> - exynos_dp_swreset(dp);
>> -
>> - exynos_dp_init_analog_param(dp);
>> - exynos_dp_init_interrupt(dp);
>> -
>> - /* SW defined function Normal operation */
>> - exynos_dp_enable_sw_function(dp);
>> -
>> - exynos_dp_config_interrupt(dp);
>> - exynos_dp_init_analog_func(dp);
>> -
>> - exynos_dp_init_hpd(dp);
>> - exynos_dp_init_aux(dp);
>> -
>> - return 0;
>> -}
>> -
>> -static int exynos_dp_detect_hpd(struct exynos_dp_device *dp)
>> -{
>> - int timeout_loop = 0;
>> -
>> - while (exynos_dp_get_plug_in_status(dp) != 0) {
>> - timeout_loop++;
>> - if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> - dev_err(dp->dev, "failed to get hpd plug status\n");
>> - return -ETIMEDOUT;
>> - }
>> - usleep_range(10, 11);
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -static unsigned char exynos_dp_calc_edid_check_sum(unsigned char
>> *edid_data)
>> -{
>> - int i;
>> - unsigned char sum = 0;
>> -
>> - for (i = 0; i < EDID_BLOCK_LENGTH; i++)
>> - sum = sum + edid_data[i];
>> -
>> - return sum;
>> -}
>> -
>> -static int exynos_dp_read_edid(struct exynos_dp_device *dp)
>> -{
>> - unsigned char edid[EDID_BLOCK_LENGTH * 2];
>> - unsigned int extend_block = 0;
>> - unsigned char sum;
>> - unsigned char test_vector;
>> - int retval;
>> -
>> - /*
>> - * EDID device address is 0x50.
>> - * However, if necessary, you must have set upper address
>> - * into E-EDID in I2C device, 0x30.
>> - */
>> -
>> - /* Read Extension Flag, Number of 128-byte EDID extension blocks */
>> - retval = exynos_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
>> - EDID_EXTENSION_FLAG,
>> - &extend_block);
>> - if (retval)
>> - return retval;
>> -
>> - if (extend_block > 0) {
>> - dev_dbg(dp->dev, "EDID data includes a single
> extension!\n");
>> -
>> - /* Read EDID data */
>> - retval = exynos_dp_read_bytes_from_i2c(dp,
>> I2C_EDID_DEVICE_ADDR,
>> - EDID_HEADER_PATTERN,
>> - EDID_BLOCK_LENGTH,
>> - &edid[EDID_HEADER_PATTERN]);
>> - if (retval != 0) {
>> - dev_err(dp->dev, "EDID Read failed!\n");
>> - return -EIO;
>> - }
>> - sum = exynos_dp_calc_edid_check_sum(edid);
>> - if (sum != 0) {
>> - dev_err(dp->dev, "EDID bad checksum!\n");
>> - return -EIO;
>> - }
>> -
>> - /* Read additional EDID data */
>> - retval = exynos_dp_read_bytes_from_i2c(dp,
>> - I2C_EDID_DEVICE_ADDR,
>> - EDID_BLOCK_LENGTH,
>> - EDID_BLOCK_LENGTH,
>> - &edid[EDID_BLOCK_LENGTH]);
>> - if (retval != 0) {
>> - dev_err(dp->dev, "EDID Read failed!\n");
>> - return -EIO;
>> - }
>> - sum =
>> exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
>> - if (sum != 0) {
>> - dev_err(dp->dev, "EDID bad checksum!\n");
>> - return -EIO;
>> - }
>> -
>> - exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TEST_REQUEST,
>> - &test_vector);
>> - if (test_vector & DPCD_TEST_EDID_READ) {
>> - exynos_dp_write_byte_to_dpcd(dp,
>> - DPCD_ADDR_TEST_EDID_CHECKSUM,
>> - edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
>> - exynos_dp_write_byte_to_dpcd(dp,
>> - DPCD_ADDR_TEST_RESPONSE,
>> - DPCD_TEST_EDID_CHECKSUM_WRITE);
>> - }
>> - } else {
>> - dev_info(dp->dev, "EDID data does not include any
>> extensions.\n");
>> -
>> - /* Read EDID data */
>> - retval = exynos_dp_read_bytes_from_i2c(dp,
>> - I2C_EDID_DEVICE_ADDR,
>> - EDID_HEADER_PATTERN,
>> - EDID_BLOCK_LENGTH,
>> - &edid[EDID_HEADER_PATTERN]);
>> - if (retval != 0) {
>> - dev_err(dp->dev, "EDID Read failed!\n");
>> - return -EIO;
>> - }
>> - sum = exynos_dp_calc_edid_check_sum(edid);
>> - if (sum != 0) {
>> - dev_err(dp->dev, "EDID bad checksum!\n");
>> - return -EIO;
>> - }
>> -
>> - exynos_dp_read_byte_from_dpcd(dp,
>> - DPCD_ADDR_TEST_REQUEST,
>> - &test_vector);
>> - if (test_vector & DPCD_TEST_EDID_READ) {
>> - exynos_dp_write_byte_to_dpcd(dp,
>> - DPCD_ADDR_TEST_EDID_CHECKSUM,
>> - edid[EDID_CHECKSUM]);
>> - exynos_dp_write_byte_to_dpcd(dp,
>> - DPCD_ADDR_TEST_RESPONSE,
>> - DPCD_TEST_EDID_CHECKSUM_WRITE);
>> - }
>> - }
>> -
>> - dev_err(dp->dev, "EDID Read success!\n");
>> - return 0;
>> -}
>> -
>> -static int exynos_dp_handle_edid(struct exynos_dp_device *dp)
>> -{
>> - u8 buf[12];
>> - int i;
>> - int retval;
>> -
>> - /* Read DPCD DPCD_ADDR_DPCD_REV~RECEIVE_PORT1_CAP_1 */
>> - retval = exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_DPCD_REV,
>> - 12, buf);
>> - if (retval)
>> - return retval;
>> -
>> - /* Read EDID */
>> - for (i = 0; i < 3; i++) {
>> - retval = exynos_dp_read_edid(dp);
>> - if (!retval)
>> - break;
>> - }
>> -
>> - return retval;
>> -}
>> -
>> -static void exynos_dp_enable_rx_to_enhanced_mode(struct exynos_dp_device
>> *dp,
>> - bool enable)
>> -{
>> - u8 data;
>> -
>> - exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data);
>> -
>> - if (enable)
>> - exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
>> - DPCD_ENHANCED_FRAME_EN |
>> - DPCD_LANE_COUNT_SET(data));
>> - else
>> - exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
>> - DPCD_LANE_COUNT_SET(data));
>> -}
>> -
>> -static int exynos_dp_is_enhanced_mode_available(struct exynos_dp_device
>> *dp)
>> -{
>> - u8 data;
>> - int retval;
>> -
>> - exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data);
>> - retval = DPCD_ENHANCED_FRAME_CAP(data);
>> -
>> - return retval;
>> -}
>> -
>> -static void exynos_dp_set_enhanced_mode(struct exynos_dp_device *dp)
>> -{
>> - u8 data;
>> -
>> - data = exynos_dp_is_enhanced_mode_available(dp);
>> - exynos_dp_enable_rx_to_enhanced_mode(dp, data);
>> - exynos_dp_enable_enhanced_mode(dp, data);
>> -}
>> -
>> -static void exynos_dp_training_pattern_dis(struct exynos_dp_device *dp)
>> -{
>> - exynos_dp_set_training_pattern(dp, DP_NONE);
>> -
>> - exynos_dp_write_byte_to_dpcd(dp,
>> - DPCD_ADDR_TRAINING_PATTERN_SET,
>> - DPCD_TRAINING_PATTERN_DISABLED);
>> -}
>> -
>> -static void exynos_dp_set_lane_lane_pre_emphasis(struct exynos_dp_device
>> *dp,
>> - int pre_emphasis, int lane)
>> -{
>> - switch (lane) {
>> - case 0:
>> - exynos_dp_set_lane0_pre_emphasis(dp, pre_emphasis);
>> - break;
>> - case 1:
>> - exynos_dp_set_lane1_pre_emphasis(dp, pre_emphasis);
>> - break;
>> -
>> - case 2:
>> - exynos_dp_set_lane2_pre_emphasis(dp, pre_emphasis);
>> - break;
>> -
>> - case 3:
>> - exynos_dp_set_lane3_pre_emphasis(dp, pre_emphasis);
>> - break;
>> - }
>> -}
>> -
>> -static int exynos_dp_link_start(struct exynos_dp_device *dp)
>> -{
>> - u8 buf[4];
>> - int lane, lane_count, pll_tries, retval;
>> -
>> - lane_count = dp->link_train.lane_count;
>> -
>> - dp->link_train.lt_state = CLOCK_RECOVERY;
>> - dp->link_train.eq_loop = 0;
>> -
>> - for (lane = 0; lane < lane_count; lane++)
>> - dp->link_train.cr_loop[lane] = 0;
>> -
>> - /* Set link rate and count as you want to establish*/
>> - exynos_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
>> - exynos_dp_set_lane_count(dp, dp->link_train.lane_count);
>> -
>> - /* Setup RX configuration */
>> - buf[0] = dp->link_train.link_rate;
>> - buf[1] = dp->link_train.lane_count;
>> - retval = exynos_dp_write_bytes_to_dpcd(dp, DPCD_ADDR_LINK_BW_SET,
>> - 2, buf);
>> - if (retval)
>> - return retval;
>> -
>> - /* Set TX pre-emphasis to minimum */
>> - for (lane = 0; lane < lane_count; lane++)
>> - exynos_dp_set_lane_lane_pre_emphasis(dp,
>> - PRE_EMPHASIS_LEVEL_0, lane);
>> -
>> - /* Wait for PLL lock */
>> - pll_tries = 0;
>> - while (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> - if (pll_tries == DP_TIMEOUT_LOOP_COUNT) {
>> - dev_err(dp->dev, "Wait for PLL lock timed out\n");
>> - return -ETIMEDOUT;
>> - }
>> -
>> - pll_tries++;
>> - usleep_range(90, 120);
>> - }
>> -
>> - /* Set training pattern 1 */
>> - exynos_dp_set_training_pattern(dp, TRAINING_PTN1);
>> -
>> - /* Set RX training pattern */
>> - retval = exynos_dp_write_byte_to_dpcd(dp,
>> - DPCD_ADDR_TRAINING_PATTERN_SET,
>> - DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1);
>> - if (retval)
>> - return retval;
>> -
>> - for (lane = 0; lane < lane_count; lane++)
>> - buf[lane] = DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 |
>> - DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0;
>> -
>> - retval = exynos_dp_write_bytes_to_dpcd(dp,
>> DPCD_ADDR_TRAINING_LANE0_SET,
>> - lane_count, buf);
>> -
>> - return retval;
>> -}
>> -
>> -static unsigned char exynos_dp_get_lane_status(u8 link_status[2], int
>> lane)
>> -{
>> - int shift = (lane & 1) * 4;
>> - u8 link_value = link_status[lane>>1];
>> -
>> - return (link_value >> shift) & 0xf;
>> -}
>> -
>> -static int exynos_dp_clock_recovery_ok(u8 link_status[2], int lane_count)
>> -{
>> - int lane;
>> - u8 lane_status;
>> -
>> - for (lane = 0; lane < lane_count; lane++) {
>> - lane_status = exynos_dp_get_lane_status(link_status, lane);
>> - if ((lane_status & DPCD_LANE_CR_DONE) == 0)
>> - return -EINVAL;
>> - }
>> - return 0;
>> -}
>> -
>> -static int exynos_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
>> - int lane_count)
>> -{
>> - int lane;
>> - u8 lane_status;
>> -
>> - if ((link_align & DPCD_INTERLANE_ALIGN_DONE) == 0)
>> - return -EINVAL;
>> -
>> - for (lane = 0; lane < lane_count; lane++) {
>> - lane_status = exynos_dp_get_lane_status(link_status, lane);
>> - lane_status &= DPCD_CHANNEL_EQ_BITS;
>> - if (lane_status != DPCD_CHANNEL_EQ_BITS)
>> - return -EINVAL;
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -static unsigned char exynos_dp_get_adjust_request_voltage(u8
>> adjust_request[2],
>> - int lane)
>> -{
>> - int shift = (lane & 1) * 4;
>> - u8 link_value = adjust_request[lane>>1];
>> -
>> - return (link_value >> shift) & 0x3;
>> -}
>> -
>> -static unsigned char exynos_dp_get_adjust_request_pre_emphasis(
>> - u8 adjust_request[2],
>> - int lane)
>> -{
>> - int shift = (lane & 1) * 4;
>> - u8 link_value = adjust_request[lane>>1];
>> -
>> - return ((link_value >> shift) & 0xc) >> 2;
>> -}
>> -
>> -static void exynos_dp_set_lane_link_training(struct exynos_dp_device *dp,
>> - u8 training_lane_set, int lane)
>> -{
>> - switch (lane) {
>> - case 0:
>> - exynos_dp_set_lane0_link_training(dp, training_lane_set);
>> - break;
>> - case 1:
>> - exynos_dp_set_lane1_link_training(dp, training_lane_set);
>> - break;
>> -
>> - case 2:
>> - exynos_dp_set_lane2_link_training(dp, training_lane_set);
>> - break;
>> -
>> - case 3:
>> - exynos_dp_set_lane3_link_training(dp, training_lane_set);
>> - break;
>> - }
>> -}
>> -
>> -static unsigned int exynos_dp_get_lane_link_training(
>> - struct exynos_dp_device *dp,
>> - int lane)
>> -{
>> - u32 reg;
>> -
>> - switch (lane) {
>> - case 0:
>> - reg = exynos_dp_get_lane0_link_training(dp);
>> - break;
>> - case 1:
>> - reg = exynos_dp_get_lane1_link_training(dp);
>> - break;
>> - case 2:
>> - reg = exynos_dp_get_lane2_link_training(dp);
>> - break;
>> - case 3:
>> - reg = exynos_dp_get_lane3_link_training(dp);
>> - break;
>> - default:
>> - WARN_ON(1);
>> - return 0;
>> - }
>> -
>> - return reg;
>> -}
>> -
>> -static void exynos_dp_reduce_link_rate(struct exynos_dp_device *dp)
>> -{
>> - exynos_dp_training_pattern_dis(dp);
>> - exynos_dp_set_enhanced_mode(dp);
>> -
>> - dp->link_train.lt_state = FAILED;
>> -}
>> -
>> -static void exynos_dp_get_adjust_training_lane(struct exynos_dp_device
>> *dp,
>> - u8 adjust_request[2])
>> -{
>> - int lane, lane_count;
>> - u8 voltage_swing, pre_emphasis, training_lane;
>> -
>> - lane_count = dp->link_train.lane_count;
>> - for (lane = 0; lane < lane_count; lane++) {
>> - voltage_swing = exynos_dp_get_adjust_request_voltage(
>> - adjust_request, lane);
>> - pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
>> - adjust_request, lane);
>> - training_lane = DPCD_VOLTAGE_SWING_SET(voltage_swing) |
>> - DPCD_PRE_EMPHASIS_SET(pre_emphasis);
>> -
>> - if (voltage_swing == VOLTAGE_LEVEL_3)
>> - training_lane |= DPCD_MAX_SWING_REACHED;
>> - if (pre_emphasis == PRE_EMPHASIS_LEVEL_3)
>> - training_lane |= DPCD_MAX_PRE_EMPHASIS_REACHED;
>> -
>> - dp->link_train.training_lane[lane] = training_lane;
>> - }
>> -}
>> -
>> -static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
>> -{
>> - int lane, lane_count, retval;
>> - u8 voltage_swing, pre_emphasis, training_lane;
>> - u8 link_status[2], adjust_request[2];
>> -
>> - usleep_range(100, 101);
>> -
>> - lane_count = dp->link_train.lane_count;
>> -
>> - retval = exynos_dp_read_bytes_from_dpcd(dp,
>> - DPCD_ADDR_LANE0_1_STATUS, 2, link_status);
>> - if (retval)
>> - return retval;
>> -
>> - retval = exynos_dp_read_bytes_from_dpcd(dp,
>> - DPCD_ADDR_ADJUST_REQUEST_LANE0_1, 2,
> adjust_request);
>> - if (retval)
>> - return retval;
>> -
>> - if (exynos_dp_clock_recovery_ok(link_status, lane_count) == 0) {
>> - /* set training pattern 2 for EQ */
>> - exynos_dp_set_training_pattern(dp, TRAINING_PTN2);
>> -
>> - retval = exynos_dp_write_byte_to_dpcd(dp,
>> - DPCD_ADDR_TRAINING_PATTERN_SET,
>> - DPCD_SCRAMBLING_DISABLED |
>> - DPCD_TRAINING_PATTERN_2);
>> - if (retval)
>> - return retval;
>> -
>> - dev_info(dp->dev, "Link Training Clock Recovery success\n");
>> - dp->link_train.lt_state = EQUALIZER_TRAINING;
>> - } else {
>> - for (lane = 0; lane < lane_count; lane++) {
>> - training_lane = exynos_dp_get_lane_link_training(
>> - dp, lane);
>> - voltage_swing =
> exynos_dp_get_adjust_request_voltage(
>> - adjust_request,
> lane);
>> - pre_emphasis =
>> exynos_dp_get_adjust_request_pre_emphasis(
>> - adjust_request,
> lane);
>> -
>> - if (DPCD_VOLTAGE_SWING_GET(training_lane) ==
>> - voltage_swing &&
>> - DPCD_PRE_EMPHASIS_GET(training_lane) ==
>> - pre_emphasis)
>> - dp->link_train.cr_loop[lane]++;
>> -
>> - if (dp->link_train.cr_loop[lane] == MAX_CR_LOOP ||
>> - voltage_swing == VOLTAGE_LEVEL_3 ||
>> - pre_emphasis == PRE_EMPHASIS_LEVEL_3) {
>> - dev_err(dp->dev, "CR Max reached
> (%d,%d,%d)\n",
>> - dp->link_train.cr_loop[lane],
>> - voltage_swing, pre_emphasis);
>> - exynos_dp_reduce_link_rate(dp);
>> - return -EIO;
>> - }
>> - }
>> - }
>> -
>> - exynos_dp_get_adjust_training_lane(dp, adjust_request);
>> -
>> - for (lane = 0; lane < lane_count; lane++)
>> - exynos_dp_set_lane_link_training(dp,
>> - dp->link_train.training_lane[lane], lane);
>> -
>> - retval = exynos_dp_write_bytes_to_dpcd(dp,
>> - DPCD_ADDR_TRAINING_LANE0_SET, lane_count,
>> - dp->link_train.training_lane);
>> - if (retval)
>> - return retval;
>> -
>> - return retval;
>> -}
>> -
>> -static int exynos_dp_process_equalizer_training(struct exynos_dp_device
>> *dp)
>> -{
>> - int lane, lane_count, retval;
>> - u32 reg;
>> - u8 link_align, link_status[2], adjust_request[2];
>> -
>> - usleep_range(400, 401);
>> -
>> - lane_count = dp->link_train.lane_count;
>> -
>> - retval = exynos_dp_read_bytes_from_dpcd(dp,
>> - DPCD_ADDR_LANE0_1_STATUS, 2, link_status);
>> - if (retval)
>> - return retval;
>> -
>> - if (exynos_dp_clock_recovery_ok(link_status, lane_count)) {
>> - exynos_dp_reduce_link_rate(dp);
>> - return -EIO;
>> - }
>> -
>> - retval = exynos_dp_read_bytes_from_dpcd(dp,
>> - DPCD_ADDR_ADJUST_REQUEST_LANE0_1, 2,
> adjust_request);
>> - if (retval)
>> - return retval;
>> -
>> - retval = exynos_dp_read_byte_from_dpcd(dp,
>> - DPCD_ADDR_LANE_ALIGN_STATUS_UPDATED, &link_align);
>> - if (retval)
>> - return retval;
>> -
>> - exynos_dp_get_adjust_training_lane(dp, adjust_request);
>> -
>> - if (!exynos_dp_channel_eq_ok(link_status, link_align, lane_count))
>> {
>> - /* traing pattern Set to Normal */
>> - exynos_dp_training_pattern_dis(dp);
>> -
>> - dev_info(dp->dev, "Link Training success!\n");
>> -
>> - exynos_dp_get_link_bandwidth(dp, ®);
>> - dp->link_train.link_rate = reg;
>> - dev_dbg(dp->dev, "final bandwidth = %.2x\n",
>> - dp->link_train.link_rate);
>> -
>> - exynos_dp_get_lane_count(dp, ®);
>> - dp->link_train.lane_count = reg;
>> - dev_dbg(dp->dev, "final lane count = %.2x\n",
>> - dp->link_train.lane_count);
>> -
>> - /* set enhanced mode if available */
>> - exynos_dp_set_enhanced_mode(dp);
>> - dp->link_train.lt_state = FINISHED;
>> -
>> - return 0;
>> - }
>> -
>> - /* not all locked */
>> - dp->link_train.eq_loop++;
>> -
>> - if (dp->link_train.eq_loop > MAX_EQ_LOOP) {
>> - dev_err(dp->dev, "EQ Max loop\n");
>> - exynos_dp_reduce_link_rate(dp);
>> - return -EIO;
>> - }
>> -
>> - for (lane = 0; lane < lane_count; lane++)
>> - exynos_dp_set_lane_link_training(dp,
>> - dp->link_train.training_lane[lane], lane);
>> -
>> - retval = exynos_dp_write_bytes_to_dpcd(dp,
>> DPCD_ADDR_TRAINING_LANE0_SET,
>> - lane_count, dp->link_train.training_lane);
>> -
>> - return retval;
>> -}
>> -
>> -static void exynos_dp_get_max_rx_bandwidth(struct exynos_dp_device *dp,
>> - u8 *bandwidth)
>> -{
>> - u8 data;
>> -
>> - /*
>> - * For DP rev.1.1, Maximum link rate of Main Link lanes
>> - * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
>> - */
>> - exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LINK_RATE, &data);
>> - *bandwidth = data;
>> -}
>> -
>> -static void exynos_dp_get_max_rx_lane_count(struct exynos_dp_device *dp,
>> - u8 *lane_count)
>> -{
>> - u8 data;
>> -
>> - /*
>> - * For DP rev.1.1, Maximum number of Main Link lanes
>> - * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
>> - */
>> - exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data);
>> - *lane_count = DPCD_MAX_LANE_COUNT(data);
>> -}
>> -
>> -static void exynos_dp_init_training(struct exynos_dp_device *dp,
>> - enum link_lane_count_type max_lane,
>> - enum link_rate_type max_rate)
>> -{
>> - /*
>> - * MACRO_RST must be applied after the PLL_LOCK to avoid
>> - * the DP inter pair skew issue for at least 10 us
>> - */
>> - exynos_dp_reset_macro(dp);
>> -
>> - /* Initialize by reading RX's DPCD */
>> - exynos_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
>> - exynos_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
>> -
>> - if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
>> - (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
>> - dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
>> - dp->link_train.link_rate);
>> - dp->link_train.link_rate = LINK_RATE_1_62GBPS;
>> - }
>> -
>> - if (dp->link_train.lane_count == 0) {
>> - dev_err(dp->dev, "Rx Max Lane count is abnormal :%x !\n",
>> - dp->link_train.lane_count);
>> - dp->link_train.lane_count = (u8)LANE_COUNT1;
>> - }
>> -
>> - /* Setup TX lane count & rate */
>> - if (dp->link_train.lane_count > max_lane)
>> - dp->link_train.lane_count = max_lane;
>> - if (dp->link_train.link_rate > max_rate)
>> - dp->link_train.link_rate = max_rate;
>> -
>> - /* All DP analog module power up */
>> - exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
>> -}
>> -
>> -static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
>> -{
>> - int retval = 0, training_finished = 0;
>> -
>> - dp->link_train.lt_state = START;
>> -
>> - /* Process here */
>> - while (!retval && !training_finished) {
>> - switch (dp->link_train.lt_state) {
>> - case START:
>> - retval = exynos_dp_link_start(dp);
>> - if (retval)
>> - dev_err(dp->dev, "LT link start failed!\n");
>> - break;
>> - case CLOCK_RECOVERY:
>> - retval = exynos_dp_process_clock_recovery(dp);
>> - if (retval)
>> - dev_err(dp->dev, "LT CR failed!\n");
>> - break;
>> - case EQUALIZER_TRAINING:
>> - retval = exynos_dp_process_equalizer_training(dp);
>> - if (retval)
>> - dev_err(dp->dev, "LT EQ failed!\n");
>> - break;
>> - case FINISHED:
>> - training_finished = 1;
>> - break;
>> - case FAILED:
>> - return -EREMOTEIO;
>> - }
>> - }
>> - if (retval)
>> - dev_err(dp->dev, "eDP link training failed (%d)\n", retval);
>> -
>> - return retval;
>> -}
>> -
>> -static int exynos_dp_set_link_train(struct exynos_dp_device *dp,
>> - u32 count,
>> - u32 bwtype)
>> -{
>> - int i;
>> - int retval;
>> -
>> - for (i = 0; i < DP_TIMEOUT_LOOP_COUNT; i++) {
>> - exynos_dp_init_training(dp, count, bwtype);
>> - retval = exynos_dp_sw_link_training(dp);
>> - if (retval == 0)
>> - break;
>> -
>> - usleep_range(100, 110);
>> - }
>> -
>> - return retval;
>> -}
>> -
>> -static int exynos_dp_config_video(struct exynos_dp_device *dp)
>> -{
>> - int retval = 0;
>> - int timeout_loop = 0;
>> - int done_count = 0;
>> -
>> - exynos_dp_config_video_slave_mode(dp);
>> -
>> - exynos_dp_set_video_color_format(dp);
>> -
>> - if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> - dev_err(dp->dev, "PLL is not locked yet.\n");
>> - return -EINVAL;
>> - }
>> -
>> - for (;;) {
>> - timeout_loop++;
>> - if (exynos_dp_is_slave_video_stream_clock_on(dp) == 0)
>> - break;
>> - if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> - dev_err(dp->dev, "Timeout of video streamclk ok\n");
>> - return -ETIMEDOUT;
>> - }
>> -
>> - usleep_range(1, 2);
>> - }
>> -
>> - /* Set to use the register calculated M/N video */
>> - exynos_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0);
>> -
>> - /* For video bist, Video timing must be generated by register */
>> - exynos_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE);
>> -
>> - /* Disable video mute */
>> - exynos_dp_enable_video_mute(dp, 0);
>> -
>> - /* Configure video slave mode */
>> - exynos_dp_enable_video_master(dp, 0);
>> -
>> - /* Enable video */
>> - exynos_dp_start_video(dp);
>> -
>> - timeout_loop = 0;
>> -
>> - for (;;) {
>> - timeout_loop++;
>> - if (exynos_dp_is_video_stream_on(dp) == 0) {
>> - done_count++;
>> - if (done_count > 10)
>> - break;
>> - } else if (done_count) {
>> - done_count = 0;
>> - }
>> - if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> - dev_err(dp->dev, "Timeout of video streamclk ok\n");
>> - return -ETIMEDOUT;
>> - }
>> -
>> - usleep_range(1000, 1001);
>> - }
>> -
>> - if (retval != 0)
>> - dev_err(dp->dev, "Video stream is not detected!\n");
>> -
>> - return retval;
>> -}
>> -
>> -static void exynos_dp_enable_scramble(struct exynos_dp_device *dp, bool
>> enable)
>> -{
>> - u8 data;
>> -
>> - if (enable) {
>> - exynos_dp_enable_scrambling(dp);
>> -
>> - exynos_dp_read_byte_from_dpcd(dp,
>> - DPCD_ADDR_TRAINING_PATTERN_SET,
>> - &data);
>> - exynos_dp_write_byte_to_dpcd(dp,
>> - DPCD_ADDR_TRAINING_PATTERN_SET,
>> - (u8)(data & ~DPCD_SCRAMBLING_DISABLED));
>> - } else {
>> - exynos_dp_disable_scrambling(dp);
>> -
>> - exynos_dp_read_byte_from_dpcd(dp,
>> - DPCD_ADDR_TRAINING_PATTERN_SET,
>> - &data);
>> - exynos_dp_write_byte_to_dpcd(dp,
>> - DPCD_ADDR_TRAINING_PATTERN_SET,
>> - (u8)(data | DPCD_SCRAMBLING_DISABLED));
>> - }
>> -}
>> -
>> -static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
>> -{
>> - struct exynos_dp_device *dp = arg;
>> -
>> - enum dp_irq_type irq_type;
>> -
>> - irq_type = exynos_dp_get_irq_type(dp);
>> - switch (irq_type) {
>> - case DP_IRQ_TYPE_HP_CABLE_IN:
>> - dev_dbg(dp->dev, "Received irq - cable in\n");
>> - schedule_work(&dp->hotplug_work);
>> - exynos_dp_clear_hotplug_interrupts(dp);
>> - break;
>> - case DP_IRQ_TYPE_HP_CABLE_OUT:
>> - dev_dbg(dp->dev, "Received irq - cable out\n");
>> - exynos_dp_clear_hotplug_interrupts(dp);
>> - break;
>> - case DP_IRQ_TYPE_HP_CHANGE:
>> - /*
>> - * We get these change notifications once in a while, but
>> there
>> - * is nothing we can do with them. Just ignore it for now
> and
>> - * only handle cable changes.
>> - */
>> - dev_dbg(dp->dev, "Received irq - hotplug change;
>> ignoring.\n");
>> - exynos_dp_clear_hotplug_interrupts(dp);
>> - break;
>> - default:
>> - dev_err(dp->dev, "Received irq - unknown type!\n");
>> - break;
>> - }
>> - return IRQ_HANDLED;
>> -}
>> -
>> -static void exynos_dp_hotplug(struct work_struct *work)
>> -{
>> - struct exynos_dp_device *dp;
>> - int ret;
>> -
>> - dp = container_of(work, struct exynos_dp_device, hotplug_work);
>> -
>> - ret = exynos_dp_detect_hpd(dp);
>> - if (ret) {
>> - /* Cable has been disconnected, we're done */
>> - return;
>> - }
>> -
>> - ret = exynos_dp_handle_edid(dp);
>> - if (ret) {
>> - dev_err(dp->dev, "unable to handle edid\n");
>> - return;
>> - }
>> -
>> - ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
>> - dp->video_info->link_rate);
>> - if (ret) {
>> - dev_err(dp->dev, "unable to do link train\n");
>> - return;
>> - }
>> -
>> - exynos_dp_enable_scramble(dp, 1);
>> - exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
>> - exynos_dp_enable_enhanced_mode(dp, 1);
>> -
>> - exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
>> - exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
>> -
>> - exynos_dp_init_video(dp);
>> - ret = exynos_dp_config_video(dp);
>> - if (ret)
>> - dev_err(dp->dev, "unable to config video\n");
>> -}
>> -
>> -#ifdef CONFIG_OF
>> -static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device
>> *dev)
>> -{
>> - struct device_node *dp_node = dev->of_node;
>> - struct exynos_dp_platdata *pd;
>> - struct video_info *dp_video_config;
>> -
>> - pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
>> - if (!pd) {
>> - dev_err(dev, "memory allocation for pdata failed\n");
>> - return ERR_PTR(-ENOMEM);
>> - }
>> - dp_video_config = devm_kzalloc(dev,
>> - sizeof(*dp_video_config), GFP_KERNEL);
>> -
>> - if (!dp_video_config) {
>> - dev_err(dev, "memory allocation for video config failed\n");
>> - return ERR_PTR(-ENOMEM);
>> - }
>> - pd->video_info = dp_video_config;
>> -
>> - dp_video_config->h_sync_polarity =
>> - of_property_read_bool(dp_node, "hsync-active-high");
>> -
>> - dp_video_config->v_sync_polarity =
>> - of_property_read_bool(dp_node, "vsync-active-high");
>> -
>> - dp_video_config->interlaced =
>> - of_property_read_bool(dp_node, "interlaced");
>> -
>> - if (of_property_read_u32(dp_node, "samsung,color-space",
>> - &dp_video_config->color_space)) {
>> - dev_err(dev, "failed to get color-space\n");
>> - return ERR_PTR(-EINVAL);
>> - }
>> -
>> - if (of_property_read_u32(dp_node, "samsung,dynamic-range",
>> - &dp_video_config->dynamic_range)) {
>> - dev_err(dev, "failed to get dynamic-range\n");
>> - return ERR_PTR(-EINVAL);
>> - }
>> -
>> - if (of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
>> - &dp_video_config->ycbcr_coeff)) {
>> - dev_err(dev, "failed to get ycbcr-coeff\n");
>> - return ERR_PTR(-EINVAL);
>> - }
>> -
>> - if (of_property_read_u32(dp_node, "samsung,color-depth",
>> - &dp_video_config->color_depth)) {
>> - dev_err(dev, "failed to get color-depth\n");
>> - return ERR_PTR(-EINVAL);
>> - }
>> -
>> - if (of_property_read_u32(dp_node, "samsung,link-rate",
>> - &dp_video_config->link_rate)) {
>> - dev_err(dev, "failed to get link-rate\n");
>> - return ERR_PTR(-EINVAL);
>> - }
>> -
>> - if (of_property_read_u32(dp_node, "samsung,lane-count",
>> - &dp_video_config->lane_count)) {
>> - dev_err(dev, "failed to get lane-count\n");
>> - return ERR_PTR(-EINVAL);
>> - }
>> -
>> - return pd;
>> -}
>> -
>> -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
>> -{
>> - struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
>> - u32 phy_base;
>> - int ret = 0;
>> -
>> - dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
>> - if (!dp_phy_node) {
>> - dev_err(dp->dev, "could not find dptx-phy node\n");
>> - return -ENODEV;
>> - }
>> -
>> - if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
>> - dev_err(dp->dev, "failed to get reg for dptx-phy\n");
>> - ret = -EINVAL;
>> - goto err;
>> - }
>> -
>> - if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
>> - &dp->enable_mask)) {
>> - dev_err(dp->dev, "failed to get enable-mask for
> dptx-phy\n");
>> - ret = -EINVAL;
>> - goto err;
>> - }
>> -
>> - dp->phy_addr = ioremap(phy_base, SZ_4);
>> - if (!dp->phy_addr) {
>> - dev_err(dp->dev, "failed to ioremap dp-phy\n");
>> - ret = -ENOMEM;
>> - goto err;
>> - }
>> -
>> -err:
>> - of_node_put(dp_phy_node);
>> -
>> - return ret;
>> -}
>> -
>> -static void exynos_dp_phy_init(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = __raw_readl(dp->phy_addr);
>> - reg |= dp->enable_mask;
>> - __raw_writel(reg, dp->phy_addr);
>> -}
>> -
>> -static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = __raw_readl(dp->phy_addr);
>> - reg &= ~(dp->enable_mask);
>> - __raw_writel(reg, dp->phy_addr);
>> -}
>> -#else
>> -static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device
>> *dev)
>> -{
>> - return NULL;
>> -}
>> -
>> -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
>> -{
>> - return -EINVAL;
>> -}
>> -
>> -static void exynos_dp_phy_init(struct exynos_dp_device *dp)
>> -{
>> - return;
>> -}
>> -
>> -static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
>> -{
>> - return;
>> -}
>> -#endif /* CONFIG_OF */
>> -
>> -static int exynos_dp_probe(struct platform_device *pdev)
>> -{
>> - struct resource *res;
>> - struct exynos_dp_device *dp;
>> - struct exynos_dp_platdata *pdata;
>> -
>> - int ret = 0;
>> -
>> - dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
>> - GFP_KERNEL);
>> - if (!dp) {
>> - dev_err(&pdev->dev, "no memory for device data\n");
>> - return -ENOMEM;
>> - }
>> -
>> - dp->dev = &pdev->dev;
>> -
>> - if (pdev->dev.of_node) {
>> - pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
>> - if (IS_ERR(pdata))
>> - return PTR_ERR(pdata);
>> -
>> - ret = exynos_dp_dt_parse_phydata(dp);
>> - if (ret)
>> - return ret;
>> - } else {
>> - pdata = pdev->dev.platform_data;
>> - if (!pdata) {
>> - dev_err(&pdev->dev, "no platform data\n");
>> - return -EINVAL;
>> - }
>> - }
>> -
>> - dp->clock = devm_clk_get(&pdev->dev, "dp");
>> - if (IS_ERR(dp->clock)) {
>> - dev_err(&pdev->dev, "failed to get clock\n");
>> - return PTR_ERR(dp->clock);
>> - }
>> -
>> - clk_prepare_enable(dp->clock);
>> -
>> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> -
>> - dp->reg_base = devm_ioremap_resource(&pdev->dev, res);
>> - if (IS_ERR(dp->reg_base))
>> - return PTR_ERR(dp->reg_base);
>> -
>> - dp->irq = platform_get_irq(pdev, 0);
>> - if (dp->irq == -ENXIO) {
>> - dev_err(&pdev->dev, "failed to get irq\n");
>> - return -ENODEV;
>> - }
>> -
>> - INIT_WORK(&dp->hotplug_work, exynos_dp_hotplug);
>> -
>> - dp->video_info = pdata->video_info;
>> -
>> - if (pdev->dev.of_node) {
>> - if (dp->phy_addr)
>> - exynos_dp_phy_init(dp);
>> - } else {
>> - if (pdata->phy_init)
>> - pdata->phy_init();
>> - }
>> -
>> - exynos_dp_init_dp(dp);
>> -
>> - ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler,
>> 0,
>> - "exynos-dp", dp);
>> - if (ret) {
>> - dev_err(&pdev->dev, "failed to request irq\n");
>> - return ret;
>> - }
>> -
>> - platform_set_drvdata(pdev, dp);
>> -
>> - return 0;
>> -}
>> -
>> -static int exynos_dp_remove(struct platform_device *pdev)
>> -{
>> - struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
>> - struct exynos_dp_device *dp = platform_get_drvdata(pdev);
>> -
>> - flush_work(&dp->hotplug_work);
>> -
>> - if (pdev->dev.of_node) {
>> - if (dp->phy_addr)
>> - exynos_dp_phy_exit(dp);
>> - } else {
>> - if (pdata->phy_exit)
>> - pdata->phy_exit();
>> - }
>> -
>> - clk_disable_unprepare(dp->clock);
>> -
>> -
>> - return 0;
>> -}
>> -
>> -#ifdef CONFIG_PM_SLEEP
>> -static int exynos_dp_suspend(struct device *dev)
>> -{
>> - struct exynos_dp_platdata *pdata = dev->platform_data;
>> - struct exynos_dp_device *dp = dev_get_drvdata(dev);
>> -
>> - disable_irq(dp->irq);
>> -
>> - flush_work(&dp->hotplug_work);
>> -
>> - if (dev->of_node) {
>> - if (dp->phy_addr)
>> - exynos_dp_phy_exit(dp);
>> - } else {
>> - if (pdata->phy_exit)
>> - pdata->phy_exit();
>> - }
>> -
>> - clk_disable_unprepare(dp->clock);
>> -
>> - return 0;
>> -}
>> -
>> -static int exynos_dp_resume(struct device *dev)
>> -{
>> - struct exynos_dp_platdata *pdata = dev->platform_data;
>> - struct exynos_dp_device *dp = dev_get_drvdata(dev);
>> -
>> - if (dev->of_node) {
>> - if (dp->phy_addr)
>> - exynos_dp_phy_init(dp);
>> - } else {
>> - if (pdata->phy_init)
>> - pdata->phy_init();
>> - }
>> -
>> - clk_prepare_enable(dp->clock);
>> -
>> - exynos_dp_init_dp(dp);
>> -
>> - enable_irq(dp->irq);
>> -
>> - return 0;
>> -}
>> -#endif
>> -
>> -static const struct dev_pm_ops exynos_dp_pm_ops = {
>> - SET_SYSTEM_SLEEP_PM_OPS(exynos_dp_suspend, exynos_dp_resume)
>> -};
>> -
>> -static const struct of_device_id exynos_dp_match[] = {
>> - { .compatible = "samsung,exynos5-dp" },
>> - {},
>> -};
>> -MODULE_DEVICE_TABLE(of, exynos_dp_match);
>> -
>> -static struct platform_driver exynos_dp_driver = {
>> - .probe = exynos_dp_probe,
>> - .remove = exynos_dp_remove,
>> - .driver = {
>> - .name = "exynos-dp",
>> - .owner = THIS_MODULE,
>> - .pm = &exynos_dp_pm_ops,
>> - .of_match_table = of_match_ptr(exynos_dp_match),
>> - },
>> -};
>> -
>> -module_platform_driver(exynos_dp_driver);
>> -
>> -MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
>> -MODULE_DESCRIPTION("Samsung SoC DP Driver");
>> -MODULE_LICENSE("GPL");
>> diff --git a/drivers/video/exynos/exynos_dp_core.h
>> b/drivers/video/exynos/exynos_dp_core.h
>> deleted file mode 100644
>> index 6c567bbf..0000000
>> --- a/drivers/video/exynos/exynos_dp_core.h
>> +++ /dev/null
>> @@ -1,210 +0,0 @@
>> -/*
>> - * Header file for Samsung DP (Display Port) interface driver.
>> - *
>> - * Copyright (C) 2012 Samsung Electronics Co., Ltd.
>> - * Author: Jingoo Han <jg1.han@samsung.com>
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> it
>> - * under the terms of the GNU General Public License as published by the
>> - * Free Software Foundation; either version 2 of the License, or (at your
>> - * option) any later version.
>> - */
>> -
>> -#ifndef _EXYNOS_DP_CORE_H
>> -#define _EXYNOS_DP_CORE_H
>> -
>> -enum dp_irq_type {
>> - DP_IRQ_TYPE_HP_CABLE_IN,
>> - DP_IRQ_TYPE_HP_CABLE_OUT,
>> - DP_IRQ_TYPE_HP_CHANGE,
>> - DP_IRQ_TYPE_UNKNOWN,
>> -};
>> -
>> -struct link_train {
>> - int eq_loop;
>> - int cr_loop[4];
>> -
>> - u8 link_rate;
>> - u8 lane_count;
>> - u8 training_lane[4];
>> -
>> - enum link_training_state lt_state;
>> -};
>> -
>> -struct exynos_dp_device {
>> - struct device *dev;
>> - struct clk *clock;
>> - unsigned int irq;
>> - void __iomem *reg_base;
>> - void __iomem *phy_addr;
>> - unsigned int enable_mask;
>> -
>> - struct video_info *video_info;
>> - struct link_train link_train;
>> - struct work_struct hotplug_work;
>> -};
>> -
>> -/* exynos_dp_reg.c */
>> -void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool
>> enable);
>> -void exynos_dp_stop_video(struct exynos_dp_device *dp);
>> -void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable);
>> -void exynos_dp_init_analog_param(struct exynos_dp_device *dp);
>> -void exynos_dp_init_interrupt(struct exynos_dp_device *dp);
>> -void exynos_dp_reset(struct exynos_dp_device *dp);
>> -void exynos_dp_swreset(struct exynos_dp_device *dp);
>> -void exynos_dp_config_interrupt(struct exynos_dp_device *dp);
>> -enum pll_status exynos_dp_get_pll_lock_status(struct exynos_dp_device
>> *dp);
>> -void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool
>> enable);
>> -void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
>> - enum analog_power_block block,
>> - bool enable);
>> -void exynos_dp_init_analog_func(struct exynos_dp_device *dp);
>> -void exynos_dp_init_hpd(struct exynos_dp_device *dp);
>> -enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp);
>> -void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp);
>> -void exynos_dp_reset_aux(struct exynos_dp_device *dp);
>> -void exynos_dp_init_aux(struct exynos_dp_device *dp);
>> -int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp);
>> -void exynos_dp_enable_sw_function(struct exynos_dp_device *dp);
>> -int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp);
>> -int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
>> - unsigned int reg_addr,
>> - unsigned char data);
>> -int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
>> - unsigned int reg_addr,
>> - unsigned char *data);
>> -int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
>> - unsigned int reg_addr,
>> - unsigned int count,
>> - unsigned char data[]);
>> -int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
>> - unsigned int reg_addr,
>> - unsigned int count,
>> - unsigned char data[]);
>> -int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
>> - unsigned int device_addr,
>> - unsigned int reg_addr);
>> -int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
>> - unsigned int device_addr,
>> - unsigned int reg_addr,
>> - unsigned int *data);
>> -int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
>> - unsigned int device_addr,
>> - unsigned int reg_addr,
>> - unsigned int count,
>> - unsigned char edid[]);
>> -void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32
>> bwtype);
>> -void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32
>> *bwtype);
>> -void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count);
>> -void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count);
>> -void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool
>> enable);
>> -void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
>> - enum pattern_set pattern);
>> -void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32
>> level);
>> -void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32
>> level);
>> -void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32
>> level);
>> -void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32
>> level);
>> -void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
>> - u32 training_lane);
>> -void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
>> - u32 training_lane);
>> -void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
>> - u32 training_lane);
>> -void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
>> - u32 training_lane);
>> -u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp);
>> -u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp);
>> -u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp);
>> -u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp);
>> -void exynos_dp_reset_macro(struct exynos_dp_device *dp);
>> -void exynos_dp_init_video(struct exynos_dp_device *dp);
>> -
>> -void exynos_dp_set_video_color_format(struct exynos_dp_device *dp);
>> -int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device
> *dp);
>> -void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
>> - enum clock_recovery_m_value_type type,
>> - u32 m_value,
>> - u32 n_value);
>> -void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32
>> type);
>> -void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool
>> enable);
>> -void exynos_dp_start_video(struct exynos_dp_device *dp);
>> -int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp);
>> -void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp);
>> -void exynos_dp_enable_scrambling(struct exynos_dp_device *dp);
>> -void exynos_dp_disable_scrambling(struct exynos_dp_device *dp);
>> -
>> -/* I2C EDID Chip ID, Slave Address */
>> -#define I2C_EDID_DEVICE_ADDR 0x50
>> -#define I2C_E_EDID_DEVICE_ADDR 0x30
>> -
>> -#define EDID_BLOCK_LENGTH 0x80
>> -#define EDID_HEADER_PATTERN 0x00
>> -#define EDID_EXTENSION_FLAG 0x7e
>> -#define EDID_CHECKSUM 0x7f
>> -
>> -/* Definition for DPCD Register */
>> -#define DPCD_ADDR_DPCD_REV 0x0000
>> -#define DPCD_ADDR_MAX_LINK_RATE 0x0001
>> -#define DPCD_ADDR_MAX_LANE_COUNT 0x0002
>> -#define DPCD_ADDR_LINK_BW_SET 0x0100
>> -#define DPCD_ADDR_LANE_COUNT_SET 0x0101
>> -#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102
>> -#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103
>> -#define DPCD_ADDR_LANE0_1_STATUS 0x0202
>> -#define DPCD_ADDR_LANE_ALIGN_STATUS_UPDATED 0x0204
>> -#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206
>> -#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207
>> -#define DPCD_ADDR_TEST_REQUEST 0x0218
>> -#define DPCD_ADDR_TEST_RESPONSE 0x0260
>> -#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261
>> -#define DPCD_ADDR_SINK_POWER_STATE 0x0600
>> -
>> -/* DPCD_ADDR_MAX_LANE_COUNT */
>> -#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
>> -#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
>> -
>> -/* DPCD_ADDR_LANE_COUNT_SET */
>> -#define DPCD_ENHANCED_FRAME_EN (0x1 << 7)
>> -#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f)
>> -
>> -/* DPCD_ADDR_TRAINING_PATTERN_SET */
>> -#define DPCD_SCRAMBLING_DISABLED (0x1 << 5)
>> -#define DPCD_SCRAMBLING_ENABLED (0x0 << 5)
>> -#define DPCD_TRAINING_PATTERN_2 (0x2 << 0)
>> -#define DPCD_TRAINING_PATTERN_1 (0x1 << 0)
>> -#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0)
>> -
>> -/* DPCD_ADDR_TRAINING_LANE0_SET */
>> -#define DPCD_MAX_PRE_EMPHASIS_REACHED (0x1 << 5)
>> -#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3)
>> -#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3)
>> -#define DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 (0x0 << 3)
>> -#define DPCD_MAX_SWING_REACHED (0x1 << 2)
>> -#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
>> -#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
>> -#define DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0 (0x0 << 0)
>> -
>> -/* DPCD_ADDR_LANE0_1_STATUS */
>> -#define DPCD_LANE_SYMBOL_LOCKED (0x1 << 2)
>> -#define DPCD_LANE_CHANNEL_EQ_DONE (0x1 << 1)
>> -#define DPCD_LANE_CR_DONE (0x1 << 0)
>> -#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE| \
>> - DPCD_LANE_CHANNEL_EQ_DONE|\
>> - DPCD_LANE_SYMBOL_LOCKED)
>> -
>> -/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */
>> -#define DPCD_LINK_STATUS_UPDATED (0x1 << 7)
>> -#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6)
>> -#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0)
>> -
>> -/* DPCD_ADDR_TEST_REQUEST */
>> -#define DPCD_TEST_EDID_READ (0x1 << 2)
>> -
>> -/* DPCD_ADDR_TEST_RESPONSE */
>> -#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2)
>> -
>> -/* DPCD_ADDR_SINK_POWER_STATE */
>> -#define DPCD_SET_POWER_STATE_D0 (0x1 << 0)
>> -#define DPCD_SET_POWER_STATE_D4 (0x2 << 0)
>> -
>> -#endif /* _EXYNOS_DP_CORE_H */
>> diff --git a/drivers/video/exynos/exynos_dp_reg.c
>> b/drivers/video/exynos/exynos_dp_reg.c
>> deleted file mode 100644
>> index 29d9d03..0000000
>> --- a/drivers/video/exynos/exynos_dp_reg.c
>> +++ /dev/null
>> @@ -1,1245 +0,0 @@
>> -/*
>> - * Samsung DP (Display port) register interface driver.
>> - *
>> - * Copyright (C) 2012 Samsung Electronics Co., Ltd.
>> - * Author: Jingoo Han <jg1.han@samsung.com>
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> it
>> - * under the terms of the GNU General Public License as published by the
>> - * Free Software Foundation; either version 2 of the License, or (at your
>> - * option) any later version.
>> - */
>> -
>> -#include <linux/device.h>
>> -#include <linux/io.h>
>> -#include <linux/delay.h>
>> -
>> -#include <video/exynos_dp.h>
>> -
>> -#include "exynos_dp_core.h"
>> -#include "exynos_dp_reg.h"
>> -
>> -#define COMMON_INT_MASK_1 0
>> -#define COMMON_INT_MASK_2 0
>> -#define COMMON_INT_MASK_3 0
>> -#define COMMON_INT_MASK_4 (HOTPLUG_CHG | HPD_LOST | PLUG)
>> -#define INT_STA_MASK INT_HPD
>> -
>> -void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool
> enable)
>> -{
>> - u32 reg;
>> -
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> - reg |= HDCP_VIDEO_MUTE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> - reg &= ~HDCP_VIDEO_MUTE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> - }
>> -}
>> -
>> -void exynos_dp_stop_video(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> - reg &= ~VIDEO_EN;
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> -}
>> -
>> -void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable)
>> -{
>> - u32 reg;
>> -
>> - if (enable)
>> - reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
>> - LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
>> - else
>> - reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
>> - LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
>> -
>> - writel(reg, dp->reg_base + EXYNOS_DP_LANE_MAP);
>> -}
>> -
>> -void exynos_dp_init_analog_param(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = TX_TERMINAL_CTRL_50_OHM;
>> - writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_1);
>> -
>> - reg = SEL_24M | TX_DVDD_BIT_1_0625V;
>> - writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_2);
>> -
>> - reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
>> - writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_3);
>> -
>> - reg = PD_RING_OSC | AUX_TERMINAL_CTRL_50_OHM |
>> - TX_CUR1_2X | TX_CUR_16_MA;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PLL_FILTER_CTL_1);
>> -
>> - reg = CH3_AMP_400_MV | CH2_AMP_400_MV |
>> - CH1_AMP_400_MV | CH0_AMP_400_MV;
>> - writel(reg, dp->reg_base + EXYNOS_DP_TX_AMP_TUNING_CTL);
>> -}
>> -
>> -void exynos_dp_init_interrupt(struct exynos_dp_device *dp)
>> -{
>> - /* Set interrupt pin assertion polarity as high */
>> - writel(INT_POL1 | INT_POL0, dp->reg_base + EXYNOS_DP_INT_CTL);
>> -
>> - /* Clear pending regisers */
>> - writel(0xff, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
>> - writel(0x4f, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_2);
>> - writel(0xe0, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_3);
>> - writel(0xe7, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
>> - writel(0x63, dp->reg_base + EXYNOS_DP_INT_STA);
>> -
>> - /* 0:mask,1: unmask */
>> - writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
>> - writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
>> - writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
>> - writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
>> - writel(0x00, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
>> -}
>> -
>> -void exynos_dp_reset(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - exynos_dp_stop_video(dp);
>> - exynos_dp_enable_video_mute(dp, 0);
>> -
>> - reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
>> - AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
>> - HDCP_FUNC_EN_N | SW_FUNC_EN_N;
>> - writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> -
>> - reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
>> - SERDES_FIFO_FUNC_EN_N |
>> - LS_CLK_DOMAIN_FUNC_EN_N;
>> - writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> -
>> - usleep_range(20, 30);
>> -
>> - exynos_dp_lane_swap(dp, 0);
>> -
>> - writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> - writel(0x40, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> - writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> - writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> -
>> - writel(0x0, dp->reg_base + EXYNOS_DP_PKT_SEND_CTL);
>> - writel(0x0, dp->reg_base + EXYNOS_DP_HDCP_CTL);
>> -
>> - writel(0x5e, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_L);
>> - writel(0x1a, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_H);
>> -
>> - writel(0x10, dp->reg_base + EXYNOS_DP_LINK_DEBUG_CTL);
>> -
>> - writel(0x0, dp->reg_base + EXYNOS_DP_PHY_TEST);
>> -
>> - writel(0x0, dp->reg_base + EXYNOS_DP_VIDEO_FIFO_THRD);
>> - writel(0x20, dp->reg_base + EXYNOS_DP_AUDIO_MARGIN);
>> -
>> - writel(0x4, dp->reg_base + EXYNOS_DP_M_VID_GEN_FILTER_TH);
>> - writel(0x2, dp->reg_base + EXYNOS_DP_M_AUD_GEN_FILTER_TH);
>> -
>> - writel(0x00000101, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> -}
>> -
>> -void exynos_dp_swreset(struct exynos_dp_device *dp)
>> -{
>> - writel(RESET_DP_TX, dp->reg_base + EXYNOS_DP_TX_SW_RESET);
>> -}
>> -
>> -void exynos_dp_config_interrupt(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - /* 0: mask, 1: unmask */
>> - reg = COMMON_INT_MASK_1;
>> - writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
>> -
>> - reg = COMMON_INT_MASK_2;
>> - writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
>> -
>> - reg = COMMON_INT_MASK_3;
>> - writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
>> -
>> - reg = COMMON_INT_MASK_4;
>> - writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
>> -
>> - reg = INT_STA_MASK;
>> - writel(reg, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
>> -}
>> -
>> -enum pll_status exynos_dp_get_pll_lock_status(struct exynos_dp_device
> *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
>> - if (reg & PLL_LOCK)
>> - return PLL_LOCKED;
>> - else
>> - return PLL_UNLOCKED;
>> -}
>> -
>> -void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool
>> enable)
>> -{
>> - u32 reg;
>> -
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
>> - reg |= DP_PLL_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
>> - reg &= ~DP_PLL_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
>> - }
>> -}
>> -
>> -void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
>> - enum analog_power_block block,
>> - bool enable)
>> -{
>> - u32 reg;
>> -
>> - switch (block) {
>> - case AUX_BLOCK:
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg |= AUX_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg &= ~AUX_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - }
>> - break;
>> - case CH0_BLOCK:
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg |= CH0_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg &= ~CH0_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - }
>> - break;
>> - case CH1_BLOCK:
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg |= CH1_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg &= ~CH1_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - }
>> - break;
>> - case CH2_BLOCK:
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg |= CH2_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg &= ~CH2_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - }
>> - break;
>> - case CH3_BLOCK:
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg |= CH3_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg &= ~CH3_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - }
>> - break;
>> - case ANALOG_TOTAL:
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg |= DP_PHY_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
>> - reg &= ~DP_PHY_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - }
>> - break;
>> - case POWER_ALL:
>> - if (enable) {
>> - reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
>> - CH1_PD | CH0_PD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - } else {
>> - writel(0x00, dp->reg_base + EXYNOS_DP_PHY_PD);
>> - }
>> - break;
>> - default:
>> - break;
>> - }
>> -}
>> -
>> -void exynos_dp_init_analog_func(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> - int timeout_loop = 0;
>> -
>> - exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
>> -
>> - reg = PLL_LOCK_CHG;
>> - writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
>> - reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
>> - writel(reg, dp->reg_base + EXYNOS_DP_DEBUG_CTL);
>> -
>> - /* Power up PLL */
>> - if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> - exynos_dp_set_pll_power_down(dp, 0);
>> -
>> - while (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
>> - timeout_loop++;
>> - if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> - dev_err(dp->dev, "failed to get pll lock
>> status\n");
>> - return;
>> - }
>> - usleep_range(10, 20);
>> - }
>> - }
>> -
>> - /* Enable Serdes FIFO function and Link symbol clock domain module
>> */
>> - reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> - reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
>> - | AUX_FUNC_EN_N);
>> - writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> -}
>> -
>> -void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = HOTPLUG_CHG | HPD_LOST | PLUG;
>> - writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
>> -
>> - reg = INT_HPD;
>> - writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
>> -}
>> -
>> -void exynos_dp_init_hpd(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - exynos_dp_clear_hotplug_interrupts(dp);
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> - reg &= ~(F_HPD | HPD_CTRL);
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> -}
>> -
>> -enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - /* Parse hotplug interrupt status register */
>> - reg = readl(dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
>> -
>> - if (reg & PLUG)
>> - return DP_IRQ_TYPE_HP_CABLE_IN;
>> -
>> - if (reg & HPD_LOST)
>> - return DP_IRQ_TYPE_HP_CABLE_OUT;
>> -
>> - if (reg & HOTPLUG_CHG)
>> - return DP_IRQ_TYPE_HP_CHANGE;
>> -
>> - return DP_IRQ_TYPE_UNKNOWN;
>> -}
>> -
>> -void exynos_dp_reset_aux(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - /* Disable AUX channel module */
>> - reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> - reg |= AUX_FUNC_EN_N;
>> - writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> -}
>> -
>> -void exynos_dp_init_aux(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - /* Clear inerrupts related to AUX channel */
>> - reg = RPLY_RECEIV | AUX_ERR;
>> - writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
>> -
>> - exynos_dp_reset_aux(dp);
>> -
>> - /* Disable AUX transaction H/W retry */
>> - reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0)|
>> - AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_HW_RETRY_CTL) ;
>> -
>> - /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
>> - reg = DEFER_CTRL_EN | DEFER_COUNT(1);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_DEFER_CTL);
>> -
>> - /* Enable AUX channel module */
>> - reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> - reg &= ~AUX_FUNC_EN_N;
>> - writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>> -}
>> -
>> -int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> - if (reg & HPD_STATUS)
>> - return 0;
>> -
>> - return -EINVAL;
>> -}
>> -
>> -void exynos_dp_enable_sw_function(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> - reg &= ~SW_FUNC_EN_N;
>> - writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> -}
>> -
>> -int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp)
>> -{
>> - int reg;
>> - int retval = 0;
>> - int timeout_loop = 0;
>> -
>> - /* Enable AUX CH operation */
>> - reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
>> - reg |= AUX_EN;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
>> -
>> - /* Is AUX CH command reply received? */
>> - reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
>> - while (!(reg & RPLY_RECEIV)) {
>> - timeout_loop++;
>> - if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
>> - dev_err(dp->dev, "AUX CH command reply failed!\n");
>> - return -ETIMEDOUT;
>> - }
>> - reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
>> - usleep_range(10, 11);
>> - }
>> -
>> - /* Clear interrupt source for AUX CH command reply */
>> - writel(RPLY_RECEIV, dp->reg_base + EXYNOS_DP_INT_STA);
>> -
>> - /* Clear interrupt source for AUX CH access error */
>> - reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
>> - if (reg & AUX_ERR) {
>> - writel(AUX_ERR, dp->reg_base + EXYNOS_DP_INT_STA);
>> - return -EREMOTEIO;
>> - }
>> -
>> - /* Check AUX CH error access status */
>> - reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_STA);
>> - if ((reg & AUX_STATUS_MASK) != 0) {
>> - dev_err(dp->dev, "AUX CH error happens: %d\n\n",
>> - reg & AUX_STATUS_MASK);
>> - return -EREMOTEIO;
>> - }
>> -
>> - return retval;
>> -}
>> -
>> -int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
>> - unsigned int reg_addr,
>> - unsigned char data)
>> -{
>> - u32 reg;
>> - int i;
>> - int retval;
>> -
>> - for (i = 0; i < 3; i++) {
>> - /* Clear AUX CH data buffer */
>> - reg = BUF_CLR;
>> - writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> -
>> - /* Select DPCD device address */
>> - reg = AUX_ADDR_7_0(reg_addr);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> - reg = AUX_ADDR_15_8(reg_addr);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> - reg = AUX_ADDR_19_16(reg_addr);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
>> -
>> - /* Write data buffer */
>> - reg = (unsigned int)data;
>> - writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
>> -
>> - /*
>> - * Set DisplayPort transaction and write 1 byte
>> - * If bit 3 is 1, DisplayPort transaction.
>> - * If Bit 3 is 0, I2C transaction.
>> - */
>> - reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> -
>> - /* Start AUX transaction */
>> - retval = exynos_dp_start_aux_transaction(dp);
>> - if (retval == 0)
>> - break;
>> - else
>> - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
>> - __func__);
>> - }
>> -
>> - return retval;
>> -}
>> -
>> -int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
>> - unsigned int reg_addr,
>> - unsigned char *data)
>> -{
>> - u32 reg;
>> - int i;
>> - int retval;
>> -
>> - for (i = 0; i < 3; i++) {
>> - /* Clear AUX CH data buffer */
>> - reg = BUF_CLR;
>> - writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> -
>> - /* Select DPCD device address */
>> - reg = AUX_ADDR_7_0(reg_addr);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> - reg = AUX_ADDR_15_8(reg_addr);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> - reg = AUX_ADDR_19_16(reg_addr);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
>> -
>> - /*
>> - * Set DisplayPort transaction and read 1 byte
>> - * If bit 3 is 1, DisplayPort transaction.
>> - * If Bit 3 is 0, I2C transaction.
>> - */
>> - reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> -
>> - /* Start AUX transaction */
>> - retval = exynos_dp_start_aux_transaction(dp);
>> - if (retval == 0)
>> - break;
>> - else
>> - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
>> - __func__);
>> - }
>> -
>> - /* Read data buffer */
>> - reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
>> - *data = (unsigned char)(reg & 0xff);
>> -
>> - return retval;
>> -}
>> -
>> -int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
>> - unsigned int reg_addr,
>> - unsigned int count,
>> - unsigned char data[])
>> -{
>> - u32 reg;
>> - unsigned int start_offset;
>> - unsigned int cur_data_count;
>> - unsigned int cur_data_idx;
>> - int i;
>> - int retval = 0;
>> -
>> - /* Clear AUX CH data buffer */
>> - reg = BUF_CLR;
>> - writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> -
>> - start_offset = 0;
>> - while (start_offset < count) {
>> - /* Buffer size of AUX CH is 16 * 4bytes */
>> - if ((count - start_offset) > 16)
>> - cur_data_count = 16;
>> - else
>> - cur_data_count = count - start_offset;
>> -
>> - for (i = 0; i < 3; i++) {
>> - /* Select DPCD device address */
>> - reg = AUX_ADDR_7_0(reg_addr + start_offset);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> - reg = AUX_ADDR_15_8(reg_addr + start_offset);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> - reg = AUX_ADDR_19_16(reg_addr + start_offset);
>> - writel(reg, dp->reg_base +
> EXYNOS_DP_AUX_ADDR_19_16);
>> -
>> - for (cur_data_idx = 0; cur_data_idx <
> cur_data_count;
>> - cur_data_idx++) {
>> - reg = data[start_offset + cur_data_idx];
>> - writel(reg, dp->reg_base +
> EXYNOS_DP_BUF_DATA_0
>> - + 4 *
> cur_data_idx);
>> - }
>> -
>> - /*
>> - * Set DisplayPort transaction and write
>> - * If bit 3 is 1, DisplayPort transaction.
>> - * If Bit 3 is 0, I2C transaction.
>> - */
>> - reg = AUX_LENGTH(cur_data_count) |
>> - AUX_TX_COMM_DP_TRANSACTION |
> AUX_TX_COMM_WRITE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> -
>> - /* Start AUX transaction */
>> - retval = exynos_dp_start_aux_transaction(dp);
>> - if (retval == 0)
>> - break;
>> - else
>> - dev_dbg(dp->dev, "%s: Aux Transaction
> fail!\n",
>> - __func__);
>> - }
>> -
>> - start_offset += cur_data_count;
>> - }
>> -
>> - return retval;
>> -}
>> -
>> -int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
>> - unsigned int reg_addr,
>> - unsigned int count,
>> - unsigned char data[])
>> -{
>> - u32 reg;
>> - unsigned int start_offset;
>> - unsigned int cur_data_count;
>> - unsigned int cur_data_idx;
>> - int i;
>> - int retval = 0;
>> -
>> - /* Clear AUX CH data buffer */
>> - reg = BUF_CLR;
>> - writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> -
>> - start_offset = 0;
>> - while (start_offset < count) {
>> - /* Buffer size of AUX CH is 16 * 4bytes */
>> - if ((count - start_offset) > 16)
>> - cur_data_count = 16;
>> - else
>> - cur_data_count = count - start_offset;
>> -
>> - /* AUX CH Request Transaction process */
>> - for (i = 0; i < 3; i++) {
>> - /* Select DPCD device address */
>> - reg = AUX_ADDR_7_0(reg_addr + start_offset);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> - reg = AUX_ADDR_15_8(reg_addr + start_offset);
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> - reg = AUX_ADDR_19_16(reg_addr + start_offset);
>> - writel(reg, dp->reg_base +
> EXYNOS_DP_AUX_ADDR_19_16);
>> -
>> - /*
>> - * Set DisplayPort transaction and read
>> - * If bit 3 is 1, DisplayPort transaction.
>> - * If Bit 3 is 0, I2C transaction.
>> - */
>> - reg = AUX_LENGTH(cur_data_count) |
>> - AUX_TX_COMM_DP_TRANSACTION |
> AUX_TX_COMM_READ;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> -
>> - /* Start AUX transaction */
>> - retval = exynos_dp_start_aux_transaction(dp);
>> - if (retval == 0)
>> - break;
>> - else
>> - dev_dbg(dp->dev, "%s: Aux Transaction
> fail!\n",
>> - __func__);
>> - }
>> -
>> - for (cur_data_idx = 0; cur_data_idx < cur_data_count;
>> - cur_data_idx++) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
>> - + 4 * cur_data_idx);
>> - data[start_offset + cur_data_idx] =
>> - (unsigned char)reg;
>> - }
>> -
>> - start_offset += cur_data_count;
>> - }
>> -
>> - return retval;
>> -}
>> -
>> -int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
>> - unsigned int device_addr,
>> - unsigned int reg_addr)
>> -{
>> - u32 reg;
>> - int retval;
>> -
>> - /* Set EDID device address */
>> - reg = device_addr;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
>> - writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
>> - writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
>> -
>> - /* Set offset from base address of EDID device */
>> - writel(reg_addr, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
>> -
>> - /*
>> - * Set I2C transaction and write address
>> - * If bit 3 is 1, DisplayPort transaction.
>> - * If Bit 3 is 0, I2C transaction.
>> - */
>> - reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
>> - AUX_TX_COMM_WRITE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> -
>> - /* Start AUX transaction */
>> - retval = exynos_dp_start_aux_transaction(dp);
>> - if (retval != 0)
>> - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
>> -
>> - return retval;
>> -}
>> -
>> -int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
>> - unsigned int device_addr,
>> - unsigned int reg_addr,
>> - unsigned int *data)
>> -{
>> - u32 reg;
>> - int i;
>> - int retval;
>> -
>> - for (i = 0; i < 3; i++) {
>> - /* Clear AUX CH data buffer */
>> - reg = BUF_CLR;
>> - writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
>> -
>> - /* Select EDID device */
>> - retval = exynos_dp_select_i2c_device(dp, device_addr,
>> reg_addr);
>> - if (retval != 0)
>> - continue;
>> -
>> - /*
>> - * Set I2C transaction and read data
>> - * If bit 3 is 1, DisplayPort transaction.
>> - * If Bit 3 is 0, I2C transaction.
>> - */
>> - reg = AUX_TX_COMM_I2C_TRANSACTION |
>> - AUX_TX_COMM_READ;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
>> -
>> - /* Start AUX transaction */
>> - retval = exynos_dp_start_aux_transaction(dp);
>> - if (retval == 0)
>> - break;
>> - else
>> - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
>> - __func__);
>> - }
>> -
>> - /* Read data */
>> - if (retval == 0)
>> - *data = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
>> -
>> - return retval;
>> -}
>> -
>> -int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
>> - unsigned int device_addr,
>> - unsigned int reg_addr,
>> - unsigned int count,
>> - unsigned char edid[])
>> -{
>> - u32 reg;
>> - unsigned int i, j;
>> - unsigned int cur_data_idx;
>> - unsigned int defer = 0;
>> - int retval = 0;
>> -
>> - for (i = 0; i < count; i += 16) {
>> - for (j = 0; j < 3; j++) {
>> - /* Clear AUX CH data buffer */
>> - reg = BUF_CLR;
>> - writel(reg, dp->reg_base +
> EXYNOS_DP_BUFFER_DATA_CTL);
>> -
>> - /* Set normal AUX CH command */
>> - reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
>> - reg &= ~ADDR_ONLY;
>> - writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
>> -
>> - /*
>> - * If Rx sends defer, Tx sends only reads
>> - * request without sending address
>> - */
>> - if (!defer)
>> - retval = exynos_dp_select_i2c_device(dp,
>> - device_addr, reg_addr + i);
>> - else
>> - defer = 0;
>> -
>> - if (retval == 0) {
>> - /*
>> - * Set I2C transaction and write data
>> - * If bit 3 is 1, DisplayPort transaction.
>> - * If Bit 3 is 0, I2C transaction.
>> - */
>> - reg = AUX_LENGTH(16) |
>> - AUX_TX_COMM_I2C_TRANSACTION |
>> - AUX_TX_COMM_READ;
>> - writel(reg, dp->reg_base +
>> - EXYNOS_DP_AUX_CH_CTL_1);
>> -
>> - /* Start AUX transaction */
>> - retval =
> exynos_dp_start_aux_transaction(dp);
>> - if (retval == 0)
>> - break;
>> - else
>> - dev_dbg(dp->dev,
>> - "%s: Aux Transaction
> fail!\n",
>> - __func__);
>> - }
>> - /* Check if Rx sends defer */
>> - reg = readl(dp->reg_base + EXYNOS_DP_AUX_RX_COMM);
>> - if (reg == AUX_RX_COMM_AUX_DEFER ||
>> - reg == AUX_RX_COMM_I2C_DEFER) {
>> - dev_err(dp->dev, "Defer: %d\n\n", reg);
>> - defer = 1;
>> - }
>> - }
>> -
>> - for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
>> - + 4 * cur_data_idx);
>> - edid[i + cur_data_idx] = (unsigned char)reg;
>> - }
>> - }
>> -
>> - return retval;
>> -}
>> -
>> -void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32
> bwtype)
>> -{
>> - u32 reg;
>> -
>> - reg = bwtype;
>> - if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype ==
>> LINK_RATE_1_62GBPS))
>> - writel(reg, dp->reg_base + EXYNOS_DP_LINK_BW_SET);
>> -}
>> -
>> -void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32
>> *bwtype)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LINK_BW_SET);
>> - *bwtype = reg;
>> -}
>> -
>> -void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count)
>> -{
>> - u32 reg;
>> -
>> - reg = count;
>> - writel(reg, dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
>> -}
>> -
>> -void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
>> - *count = reg;
>> -}
>> -
>> -void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool
>> enable)
>> -{
>> - u32 reg;
>> -
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> - reg |= ENHANCED;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> - reg &= ~ENHANCED;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> - }
>> -}
>> -
>> -void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
>> - enum pattern_set pattern)
>> -{
>> - u32 reg;
>> -
>> - switch (pattern) {
>> - case PRBS7:
>> - reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
>> - writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> - break;
>> - case D10_2:
>> - reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
>> - writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> - break;
>> - case TRAINING_PTN1:
>> - reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
>> - writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> - break;
>> - case TRAINING_PTN2:
>> - reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
>> - writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> - break;
>> - case DP_NONE:
>> - reg = SCRAMBLING_ENABLE |
>> - LINK_QUAL_PATTERN_SET_DISABLE |
>> - SW_TRAINING_PATTERN_SET_NORMAL;
>> - writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> - break;
>> - default:
>> - break;
>> - }
>> -}
>> -
>> -void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32
>> level)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
>> - reg &= ~PRE_EMPHASIS_SET_MASK;
>> - reg |= level << PRE_EMPHASIS_SET_SHIFT;
>> - writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
>> -}
>> -
>> -void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32
>> level)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
>> - reg &= ~PRE_EMPHASIS_SET_MASK;
>> - reg |= level << PRE_EMPHASIS_SET_SHIFT;
>> - writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
>> -}
>> -
>> -void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32
>> level)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
>> - reg &= ~PRE_EMPHASIS_SET_MASK;
>> - reg |= level << PRE_EMPHASIS_SET_SHIFT;
>> - writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
>> -}
>> -
>> -void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32
>> level)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
>> - reg &= ~PRE_EMPHASIS_SET_MASK;
>> - reg |= level << PRE_EMPHASIS_SET_SHIFT;
>> - writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
>> -}
>> -
>> -void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
>> - u32 training_lane)
>> -{
>> - u32 reg;
>> -
>> - reg = training_lane;
>> - writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
>> -}
>> -
>> -void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
>> - u32 training_lane)
>> -{
>> - u32 reg;
>> -
>> - reg = training_lane;
>> - writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
>> -}
>> -
>> -void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
>> - u32 training_lane)
>> -{
>> - u32 reg;
>> -
>> - reg = training_lane;
>> - writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
>> -}
>> -
>> -void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
>> - u32 training_lane)
>> -{
>> - u32 reg;
>> -
>> - reg = training_lane;
>> - writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
>> -}
>> -
>> -u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
>> - return reg;
>> -}
>> -
>> -u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
>> - return reg;
>> -}
>> -
>> -u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
>> - return reg;
>> -}
>> -
>> -u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
>> - return reg;
>> -}
>> -
>> -void exynos_dp_reset_macro(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_PHY_TEST);
>> - reg |= MACRO_RST;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
>> -
>> - /* 10 us is the minimum reset time. */
>> - usleep_range(10, 20);
>> -
>> - reg &= ~MACRO_RST;
>> - writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
>> -}
>> -
>> -void exynos_dp_init_video(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
>> - writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
>> -
>> - reg = 0x0;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> -
>> - reg = CHA_CRI(4) | CHA_CTRL;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> -
>> - reg = 0x0;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> -
>> - reg = VID_HRES_TH(2) | VID_VRES_TH(0);
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_8);
>> -}
>> -
>> -void exynos_dp_set_video_color_format(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - /* Configure the input color depth, color space, dynamic range */
>> - reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
>> - (dp->video_info->color_depth << IN_BPC_SHIFT) |
>> - (dp->video_info->color_space << IN_COLOR_F_SHIFT);
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_2);
>> -
>> - /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
>> - reg &= ~IN_YC_COEFFI_MASK;
>> - if (dp->video_info->ycbcr_coeff)
>> - reg |= IN_YC_COEFFI_ITU709;
>> - else
>> - reg |= IN_YC_COEFFI_ITU601;
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
>> -}
>> -
>> -int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
>> -
>> - if (!(reg & DET_STA)) {
>> - dev_dbg(dp->dev, "Input stream clock not detected.\n");
>> - return -EINVAL;
>> - }
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
>> - dev_dbg(dp->dev, "wait SYS_CTL_2.\n");
>> -
>> - if (reg & CHA_STA) {
>> - dev_dbg(dp->dev, "Input stream clk is changing\n");
>> - return -EINVAL;
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
>> - enum clock_recovery_m_value_type type,
>> - u32 m_value,
>> - u32 n_value)
>> -{
>> - u32 reg;
>> -
>> - if (type == REGISTER_M) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> - reg |= FIX_M_VID;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> - reg = m_value & 0xff;
>> - writel(reg, dp->reg_base + EXYNOS_DP_M_VID_0);
>> - reg = (m_value >> 8) & 0xff;
>> - writel(reg, dp->reg_base + EXYNOS_DP_M_VID_1);
>> - reg = (m_value >> 16) & 0xff;
>> - writel(reg, dp->reg_base + EXYNOS_DP_M_VID_2);
>> -
>> - reg = n_value & 0xff;
>> - writel(reg, dp->reg_base + EXYNOS_DP_N_VID_0);
>> - reg = (n_value >> 8) & 0xff;
>> - writel(reg, dp->reg_base + EXYNOS_DP_N_VID_1);
>> - reg = (n_value >> 16) & 0xff;
>> - writel(reg, dp->reg_base + EXYNOS_DP_N_VID_2);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> - reg &= ~FIX_M_VID;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
>> -
>> - writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_0);
>> - writel(0x80, dp->reg_base + EXYNOS_DP_N_VID_1);
>> - writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_2);
>> - }
>> -}
>> -
>> -void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32
>> type)
>> -{
>> - u32 reg;
>> -
>> - if (type == VIDEO_TIMING_FROM_CAPTURE) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> - reg &= ~FORMAT_SEL;
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> - reg |= FORMAT_SEL;
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> - }
>> -}
>> -
>> -void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool
>> enable)
>> -{
>> - u32 reg;
>> -
>> - if (enable) {
>> - reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> - reg &= ~VIDEO_MODE_MASK;
>> - reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> - } else {
>> - reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> - reg &= ~VIDEO_MODE_MASK;
>> - reg |= VIDEO_MODE_SLAVE_MODE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> - }
>> -}
>> -
>> -void exynos_dp_start_video(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> - reg |= VIDEO_EN;
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
>> -}
>> -
>> -int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> - writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
>> - if (!(reg & STRM_VALID)) {
>> - dev_dbg(dp->dev, "Input video stream is not detected.\n");
>> - return -EINVAL;
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> - reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
>> - reg |= MASTER_VID_FUNC_EN_N;
>> - writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> - reg &= ~INTERACE_SCAN_CFG;
>> - reg |= (dp->video_info->interlaced << 2);
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> - reg &= ~VSYNC_POLARITY_CFG;
>> - reg |= (dp->video_info->v_sync_polarity << 1);
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> - reg &= ~HSYNC_POLARITY_CFG;
>> - reg |= (dp->video_info->h_sync_polarity << 0);
>> - writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
>> -
>> - reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
>> -}
>> -
>> -void exynos_dp_enable_scrambling(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> - reg &= ~SCRAMBLING_DISABLE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> -}
>> -
>> -void exynos_dp_disable_scrambling(struct exynos_dp_device *dp)
>> -{
>> - u32 reg;
>> -
>> - reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> - reg |= SCRAMBLING_DISABLE;
>> - writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
>> -}
>> diff --git a/drivers/video/exynos/exynos_dp_reg.h
>> b/drivers/video/exynos/exynos_dp_reg.h
>> deleted file mode 100644
>> index 2e9bd0e..0000000
>> --- a/drivers/video/exynos/exynos_dp_reg.h
>> +++ /dev/null
>> @@ -1,366 +0,0 @@
>> -/*
>> - * Register definition file for Samsung DP driver
>> - *
>> - * Copyright (C) 2012 Samsung Electronics Co., Ltd.
>> - * Author: Jingoo Han <jg1.han@samsung.com>
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> - * it under the terms of the GNU General Public License version 2 as
>> - * published by the Free Software Foundation.
>> - */
>> -
>> -#ifndef _EXYNOS_DP_REG_H
>> -#define _EXYNOS_DP_REG_H
>> -
>> -#define EXYNOS_DP_TX_SW_RESET 0x14
>> -#define EXYNOS_DP_FUNC_EN_1 0x18
>> -#define EXYNOS_DP_FUNC_EN_2 0x1C
>> -#define EXYNOS_DP_VIDEO_CTL_1 0x20
>> -#define EXYNOS_DP_VIDEO_CTL_2 0x24
>> -#define EXYNOS_DP_VIDEO_CTL_3 0x28
>> -
>> -#define EXYNOS_DP_VIDEO_CTL_8 0x3C
>> -#define EXYNOS_DP_VIDEO_CTL_10 0x44
>> -
>> -#define EXYNOS_DP_LANE_MAP 0x35C
>> -
>> -#define EXYNOS_DP_ANALOG_CTL_1 0x370
>> -#define EXYNOS_DP_ANALOG_CTL_2 0x374
>> -#define EXYNOS_DP_ANALOG_CTL_3 0x378
>> -#define EXYNOS_DP_PLL_FILTER_CTL_1 0x37C
>> -#define EXYNOS_DP_TX_AMP_TUNING_CTL 0x380
>> -
>> -#define EXYNOS_DP_AUX_HW_RETRY_CTL 0x390
>> -
>> -#define EXYNOS_DP_COMMON_INT_STA_1 0x3C4
>> -#define EXYNOS_DP_COMMON_INT_STA_2 0x3C8
>> -#define EXYNOS_DP_COMMON_INT_STA_3 0x3CC
>> -#define EXYNOS_DP_COMMON_INT_STA_4 0x3D0
>> -#define EXYNOS_DP_INT_STA 0x3DC
>> -#define EXYNOS_DP_COMMON_INT_MASK_1 0x3E0
>> -#define EXYNOS_DP_COMMON_INT_MASK_2 0x3E4
>> -#define EXYNOS_DP_COMMON_INT_MASK_3 0x3E8
>> -#define EXYNOS_DP_COMMON_INT_MASK_4 0x3EC
>> -#define EXYNOS_DP_INT_STA_MASK 0x3F8
>> -#define EXYNOS_DP_INT_CTL 0x3FC
>> -
>> -#define EXYNOS_DP_SYS_CTL_1 0x600
>> -#define EXYNOS_DP_SYS_CTL_2 0x604
>> -#define EXYNOS_DP_SYS_CTL_3 0x608
>> -#define EXYNOS_DP_SYS_CTL_4 0x60C
>> -
>> -#define EXYNOS_DP_PKT_SEND_CTL 0x640
>> -#define EXYNOS_DP_HDCP_CTL 0x648
>> -
>> -#define EXYNOS_DP_LINK_BW_SET 0x680
>> -#define EXYNOS_DP_LANE_COUNT_SET 0x684
>> -#define EXYNOS_DP_TRAINING_PTN_SET 0x688
>> -#define EXYNOS_DP_LN0_LINK_TRAINING_CTL 0x68C
>> -#define EXYNOS_DP_LN1_LINK_TRAINING_CTL 0x690
>> -#define EXYNOS_DP_LN2_LINK_TRAINING_CTL 0x694
>> -#define EXYNOS_DP_LN3_LINK_TRAINING_CTL 0x698
>> -
>> -#define EXYNOS_DP_DEBUG_CTL 0x6C0
>> -#define EXYNOS_DP_HPD_DEGLITCH_L 0x6C4
>> -#define EXYNOS_DP_HPD_DEGLITCH_H 0x6C8
>> -#define EXYNOS_DP_LINK_DEBUG_CTL 0x6E0
>> -
>> -#define EXYNOS_DP_M_VID_0 0x700
>> -#define EXYNOS_DP_M_VID_1 0x704
>> -#define EXYNOS_DP_M_VID_2 0x708
>> -#define EXYNOS_DP_N_VID_0 0x70C
>> -#define EXYNOS_DP_N_VID_1 0x710
>> -#define EXYNOS_DP_N_VID_2 0x714
>> -
>> -#define EXYNOS_DP_PLL_CTL 0x71C
>> -#define EXYNOS_DP_PHY_PD 0x720
>> -#define EXYNOS_DP_PHY_TEST 0x724
>> -
>> -#define EXYNOS_DP_VIDEO_FIFO_THRD 0x730
>> -#define EXYNOS_DP_AUDIO_MARGIN 0x73C
>> -
>> -#define EXYNOS_DP_M_VID_GEN_FILTER_TH 0x764
>> -#define EXYNOS_DP_M_AUD_GEN_FILTER_TH 0x778
>> -#define EXYNOS_DP_AUX_CH_STA 0x780
>> -#define EXYNOS_DP_AUX_CH_DEFER_CTL 0x788
>> -#define EXYNOS_DP_AUX_RX_COMM 0x78C
>> -#define EXYNOS_DP_BUFFER_DATA_CTL 0x790
>> -#define EXYNOS_DP_AUX_CH_CTL_1 0x794
>> -#define EXYNOS_DP_AUX_ADDR_7_0 0x798
>> -#define EXYNOS_DP_AUX_ADDR_15_8 0x79C
>> -#define EXYNOS_DP_AUX_ADDR_19_16 0x7A0
>> -#define EXYNOS_DP_AUX_CH_CTL_2 0x7A4
>> -
>> -#define EXYNOS_DP_BUF_DATA_0 0x7C0
>> -
>> -#define EXYNOS_DP_SOC_GENERAL_CTL 0x800
>> -
>> -/* EXYNOS_DP_TX_SW_RESET */
>> -#define RESET_DP_TX (0x1 << 0)
>> -
>> -/* EXYNOS_DP_FUNC_EN_1 */
>> -#define MASTER_VID_FUNC_EN_N (0x1 << 7)
>> -#define SLAVE_VID_FUNC_EN_N (0x1 << 5)
>> -#define AUD_FIFO_FUNC_EN_N (0x1 << 4)
>> -#define AUD_FUNC_EN_N (0x1 << 3)
>> -#define HDCP_FUNC_EN_N (0x1 << 2)
>> -#define CRC_FUNC_EN_N (0x1 << 1)
>> -#define SW_FUNC_EN_N (0x1 << 0)
>> -
>> -/* EXYNOS_DP_FUNC_EN_2 */
>> -#define SSC_FUNC_EN_N (0x1 << 7)
>> -#define AUX_FUNC_EN_N (0x1 << 2)
>> -#define SERDES_FIFO_FUNC_EN_N (0x1 << 1)
>> -#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0)
>> -
>> -/* EXYNOS_DP_VIDEO_CTL_1 */
>> -#define VIDEO_EN (0x1 << 7)
>> -#define HDCP_VIDEO_MUTE (0x1 << 6)
>> -
>> -/* EXYNOS_DP_VIDEO_CTL_1 */
>> -#define IN_D_RANGE_MASK (0x1 << 7)
>> -#define IN_D_RANGE_SHIFT (7)
>> -#define IN_D_RANGE_CEA (0x1 << 7)
>> -#define IN_D_RANGE_VESA (0x0 << 7)
>> -#define IN_BPC_MASK (0x7 << 4)
>> -#define IN_BPC_SHIFT (4)
>> -#define IN_BPC_12_BITS (0x3 << 4)
>> -#define IN_BPC_10_BITS (0x2 << 4)
>> -#define IN_BPC_8_BITS (0x1 << 4)
>> -#define IN_BPC_6_BITS (0x0 << 4)
>> -#define IN_COLOR_F_MASK (0x3 << 0)
>> -#define IN_COLOR_F_SHIFT (0)
>> -#define IN_COLOR_F_YCBCR444 (0x2 << 0)
>> -#define IN_COLOR_F_YCBCR422 (0x1 << 0)
>> -#define IN_COLOR_F_RGB (0x0 << 0)
>> -
>> -/* EXYNOS_DP_VIDEO_CTL_3 */
>> -#define IN_YC_COEFFI_MASK (0x1 << 7)
>> -#define IN_YC_COEFFI_SHIFT (7)
>> -#define IN_YC_COEFFI_ITU709 (0x1 << 7)
>> -#define IN_YC_COEFFI_ITU601 (0x0 << 7)
>> -#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4)
>> -#define VID_CHK_UPDATE_TYPE_SHIFT (4)
>> -#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4)
>> -#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
>> -
>> -/* EXYNOS_DP_VIDEO_CTL_8 */
>> -#define VID_HRES_TH(x) (((x) & 0xf) << 4)
>> -#define VID_VRES_TH(x) (((x) & 0xf) << 0)
>> -
>> -/* EXYNOS_DP_VIDEO_CTL_10 */
>> -#define FORMAT_SEL (0x1 << 4)
>> -#define INTERACE_SCAN_CFG (0x1 << 2)
>> -#define VSYNC_POLARITY_CFG (0x1 << 1)
>> -#define HSYNC_POLARITY_CFG (0x1 << 0)
>> -
>> -/* EXYNOS_DP_LANE_MAP */
>> -#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
>> -#define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
>> -#define LANE3_MAP_LOGIC_LANE_2 (0x2 << 6)
>> -#define LANE3_MAP_LOGIC_LANE_3 (0x3 << 6)
>> -#define LANE2_MAP_LOGIC_LANE_0 (0x0 << 4)
>> -#define LANE2_MAP_LOGIC_LANE_1 (0x1 << 4)
>> -#define LANE2_MAP_LOGIC_LANE_2 (0x2 << 4)
>> -#define LANE2_MAP_LOGIC_LANE_3 (0x3 << 4)
>> -#define LANE1_MAP_LOGIC_LANE_0 (0x0 << 2)
>> -#define LANE1_MAP_LOGIC_LANE_1 (0x1 << 2)
>> -#define LANE1_MAP_LOGIC_LANE_2 (0x2 << 2)
>> -#define LANE1_MAP_LOGIC_LANE_3 (0x3 << 2)
>> -#define LANE0_MAP_LOGIC_LANE_0 (0x0 << 0)
>> -#define LANE0_MAP_LOGIC_LANE_1 (0x1 << 0)
>> -#define LANE0_MAP_LOGIC_LANE_2 (0x2 << 0)
>> -#define LANE0_MAP_LOGIC_LANE_3 (0x3 << 0)
>> -
>> -/* EXYNOS_DP_ANALOG_CTL_1 */
>> -#define TX_TERMINAL_CTRL_50_OHM (0x1 << 4)
>> -
>> -/* EXYNOS_DP_ANALOG_CTL_2 */
>> -#define SEL_24M (0x1 << 3)
>> -#define TX_DVDD_BIT_1_0625V (0x4 << 0)
>> -
>> -/* EXYNOS_DP_ANALOG_CTL_3 */
>> -#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5)
>> -#define VCO_BIT_600_MICRO (0x5 << 0)
>> -
>> -/* EXYNOS_DP_PLL_FILTER_CTL_1 */
>> -#define PD_RING_OSC (0x1 << 6)
>> -#define AUX_TERMINAL_CTRL_50_OHM (0x2 << 4)
>> -#define TX_CUR1_2X (0x1 << 2)
>> -#define TX_CUR_16_MA (0x3 << 0)
>> -
>> -/* EXYNOS_DP_TX_AMP_TUNING_CTL */
>> -#define CH3_AMP_400_MV (0x0 << 24)
>> -#define CH2_AMP_400_MV (0x0 << 16)
>> -#define CH1_AMP_400_MV (0x0 << 8)
>> -#define CH0_AMP_400_MV (0x0 << 0)
>> -
>> -/* EXYNOS_DP_AUX_HW_RETRY_CTL */
>> -#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8)
>> -#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3)
>> -#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3)
>> -#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3)
>> -#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3)
>> -#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3)
>> -#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0)
>> -
>> -/* EXYNOS_DP_COMMON_INT_STA_1 */
>> -#define VSYNC_DET (0x1 << 7)
>> -#define PLL_LOCK_CHG (0x1 << 6)
>> -#define SPDIF_ERR (0x1 << 5)
>> -#define SPDIF_UNSTBL (0x1 << 4)
>> -#define VID_FORMAT_CHG (0x1 << 3)
>> -#define AUD_CLK_CHG (0x1 << 2)
>> -#define VID_CLK_CHG (0x1 << 1)
>> -#define SW_INT (0x1 << 0)
>> -
>> -/* EXYNOS_DP_COMMON_INT_STA_2 */
>> -#define ENC_EN_CHG (0x1 << 6)
>> -#define HW_BKSV_RDY (0x1 << 3)
>> -#define HW_SHA_DONE (0x1 << 2)
>> -#define HW_AUTH_STATE_CHG (0x1 << 1)
>> -#define HW_AUTH_DONE (0x1 << 0)
>> -
>> -/* EXYNOS_DP_COMMON_INT_STA_3 */
>> -#define AFIFO_UNDER (0x1 << 7)
>> -#define AFIFO_OVER (0x1 << 6)
>> -#define R0_CHK_FLAG (0x1 << 5)
>> -
>> -/* EXYNOS_DP_COMMON_INT_STA_4 */
>> -#define PSR_ACTIVE (0x1 << 7)
>> -#define PSR_INACTIVE (0x1 << 6)
>> -#define SPDIF_BI_PHASE_ERR (0x1 << 5)
>> -#define HOTPLUG_CHG (0x1 << 2)
>> -#define HPD_LOST (0x1 << 1)
>> -#define PLUG (0x1 << 0)
>> -
>> -/* EXYNOS_DP_INT_STA */
>> -#define INT_HPD (0x1 << 6)
>> -#define HW_TRAINING_FINISH (0x1 << 5)
>> -#define RPLY_RECEIV (0x1 << 1)
>> -#define AUX_ERR (0x1 << 0)
>> -
>> -/* EXYNOS_DP_INT_CTL */
>> -#define SOFT_INT_CTRL (0x1 << 2)
>> -#define INT_POL1 (0x1 << 1)
>> -#define INT_POL0 (0x1 << 0)
>> -
>> -/* EXYNOS_DP_SYS_CTL_1 */
>> -#define DET_STA (0x1 << 2)
>> -#define FORCE_DET (0x1 << 1)
>> -#define DET_CTRL (0x1 << 0)
>> -
>> -/* EXYNOS_DP_SYS_CTL_2 */
>> -#define CHA_CRI(x) (((x) & 0xf) << 4)
>> -#define CHA_STA (0x1 << 2)
>> -#define FORCE_CHA (0x1 << 1)
>> -#define CHA_CTRL (0x1 << 0)
>> -
>> -/* EXYNOS_DP_SYS_CTL_3 */
>> -#define HPD_STATUS (0x1 << 6)
>> -#define F_HPD (0x1 << 5)
>> -#define HPD_CTRL (0x1 << 4)
>> -#define HDCP_RDY (0x1 << 3)
>> -#define STRM_VALID (0x1 << 2)
>> -#define F_VALID (0x1 << 1)
>> -#define VALID_CTRL (0x1 << 0)
>> -
>> -/* EXYNOS_DP_SYS_CTL_4 */
>> -#define FIX_M_AUD (0x1 << 4)
>> -#define ENHANCED (0x1 << 3)
>> -#define FIX_M_VID (0x1 << 2)
>> -#define M_VID_UPDATE_CTRL (0x3 << 0)
>> -
>> -/* EXYNOS_DP_TRAINING_PTN_SET */
>> -#define SCRAMBLER_TYPE (0x1 << 9)
>> -#define HW_LINK_TRAINING_PATTERN (0x1 << 8)
>> -#define SCRAMBLING_DISABLE (0x1 << 5)
>> -#define SCRAMBLING_ENABLE (0x0 << 5)
>> -#define LINK_QUAL_PATTERN_SET_MASK (0x3 << 2)
>> -#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2)
>> -#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2)
>> -#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2)
>> -#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0)
>> -#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0)
>> -#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0)
>> -#define SW_TRAINING_PATTERN_SET_NORMAL (0x0 << 0)
>> -
>> -/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */
>> -#define PRE_EMPHASIS_SET_MASK (0x3 << 3)
>> -#define PRE_EMPHASIS_SET_SHIFT (3)
>> -
>> -/* EXYNOS_DP_DEBUG_CTL */
>> -#define PLL_LOCK (0x1 << 4)
>> -#define F_PLL_LOCK (0x1 << 3)
>> -#define PLL_LOCK_CTRL (0x1 << 2)
>> -#define PN_INV (0x1 << 0)
>> -
>> -/* EXYNOS_DP_PLL_CTL */
>> -#define DP_PLL_PD (0x1 << 7)
>> -#define DP_PLL_RESET (0x1 << 6)
>> -#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4)
>> -#define DP_PLL_REF_BIT_1_1250V (0x5 << 0)
>> -#define DP_PLL_REF_BIT_1_2500V (0x7 << 0)
>> -
>> -/* EXYNOS_DP_PHY_PD */
>> -#define DP_PHY_PD (0x1 << 5)
>> -#define AUX_PD (0x1 << 4)
>> -#define CH3_PD (0x1 << 3)
>> -#define CH2_PD (0x1 << 2)
>> -#define CH1_PD (0x1 << 1)
>> -#define CH0_PD (0x1 << 0)
>> -
>> -/* EXYNOS_DP_PHY_TEST */
>> -#define MACRO_RST (0x1 << 5)
>> -#define CH1_TEST (0x1 << 1)
>> -#define CH0_TEST (0x1 << 0)
>> -
>> -/* EXYNOS_DP_AUX_CH_STA */
>> -#define AUX_BUSY (0x1 << 4)
>> -#define AUX_STATUS_MASK (0xf << 0)
>> -
>> -/* EXYNOS_DP_AUX_CH_DEFER_CTL */
>> -#define DEFER_CTRL_EN (0x1 << 7)
>> -#define DEFER_COUNT(x) (((x) & 0x7f) << 0)
>> -
>> -/* EXYNOS_DP_AUX_RX_COMM */
>> -#define AUX_RX_COMM_I2C_DEFER (0x2 << 2)
>> -#define AUX_RX_COMM_AUX_DEFER (0x2 << 0)
>> -
>> -/* EXYNOS_DP_BUFFER_DATA_CTL */
>> -#define BUF_CLR (0x1 << 7)
>> -#define BUF_DATA_COUNT(x) (((x) & 0x1f) << 0)
>> -
>> -/* EXYNOS_DP_AUX_CH_CTL_1 */
>> -#define AUX_LENGTH(x) (((x - 1) & 0xf) <<
> 4)
>> -#define AUX_TX_COMM_MASK (0xf << 0)
>> -#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3)
>> -#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3)
>> -#define AUX_TX_COMM_MOT (0x1 << 2)
>> -#define AUX_TX_COMM_WRITE (0x0 << 0)
>> -#define AUX_TX_COMM_READ (0x1 << 0)
>> -
>> -/* EXYNOS_DP_AUX_ADDR_7_0 */
>> -#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff)
>> -
>> -/* EXYNOS_DP_AUX_ADDR_15_8 */
>> -#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff)
>> -
>> -/* EXYNOS_DP_AUX_ADDR_19_16 */
>> -#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f)
>> -
>> -/* EXYNOS_DP_AUX_CH_CTL_2 */
>> -#define ADDR_ONLY (0x1 << 1)
>> -#define AUX_EN (0x1 << 0)
>> -
>> -/* EXYNOS_DP_SOC_GENERAL_CTL */
>> -#define AUDIO_MODE_SPDIF_MODE (0x1 << 8)
>> -#define AUDIO_MODE_MASTER_MODE (0x0 << 8)
>> -#define MASTER_VIDEO_INTERLACE_EN (0x1 << 4)
>> -#define VIDEO_MASTER_CLK_SEL (0x1 << 2)
>> -#define VIDEO_MASTER_MODE_EN (0x1 << 1)
>> -#define VIDEO_MODE_MASK (0x1 << 0)
>> -#define VIDEO_MODE_SLAVE_MODE (0x1 << 0)
>> -#define VIDEO_MODE_MASTER_MODE (0x0 << 0)
>> -
>> -#endif /* _EXYNOS_DP_REG_H */
>> --
>> 1.8.4
>
next prev parent reply other threads:[~2013-10-31 16:05 UTC|newest]
Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-29 16:12 [PATCH v3 00/32] drm/exynos: Refactor parts of the exynos driver Sean Paul
2013-10-29 16:12 ` [PATCH v3 01/32] drm/exynos: Remove useless slab.h include Sean Paul
2013-10-31 10:24 ` Inki Dae
2013-10-31 23:32 ` Tomasz Figa
2013-10-29 16:12 ` [PATCH v3 02/32] drm/exynos: Merge overlay_ops into manager_ops Sean Paul
2013-10-31 23:39 ` Tomasz Figa
2013-11-01 19:50 ` Sean Paul
2013-11-01 19:55 ` Tomasz Figa
2013-11-04 7:44 ` Inki Dae
2013-10-29 16:12 ` [PATCH v3 03/32] drm/exynos: Add an initialize function to manager and display Sean Paul
2013-10-31 23:42 ` Tomasz Figa
2013-10-29 16:12 ` [PATCH v3 04/32] drm/exynos: Use manager_op initialize in fimd Sean Paul
2013-10-31 23:49 ` Tomasz Figa
2013-11-01 19:51 ` Sean Paul
2013-11-01 19:57 ` Tomasz Figa
2013-10-29 16:12 ` [PATCH v3 05/32] drm/exynos: hdmi: Implement initialize op for hdmi Sean Paul
2013-10-31 23:53 ` Tomasz Figa
2013-11-01 19:54 ` Sean Paul
2013-11-01 19:56 ` Tomasz Figa
2013-11-01 20:08 ` Sean Paul
2013-10-29 16:12 ` [PATCH v3 06/32] drm/exynos: Pass exynos_drm_manager in manager ops instead of dev Sean Paul
2013-11-01 0:19 ` Tomasz Figa
2013-11-01 20:01 ` Sean Paul
2013-11-01 20:11 ` Tomasz Figa
2013-10-29 16:12 ` [PATCH v3 07/32] drm/exynos: Remove apply manager callback Sean Paul
2013-11-08 21:05 ` Tomasz Figa
2013-10-29 16:12 ` [PATCH v3 08/32] drm/exynos: Remove dpms link between encoder/connector Sean Paul
2013-11-08 21:45 ` Tomasz Figa
2013-10-29 16:12 ` [PATCH v3 09/32] drm/exynos: Rename display_op power_on to dpms Sean Paul
2013-11-08 22:09 ` Tomasz Figa
2013-10-29 16:12 ` [PATCH v3 10/32] drm/exynos: Don't keep dpms state in encoder Sean Paul
2013-11-10 20:47 ` Tomasz Figa
2013-10-29 16:12 ` [PATCH v3 11/32] drm/exynos: Use unsigned long for possible_crtcs Sean Paul
2013-11-10 20:47 ` Tomasz Figa
2013-10-29 16:12 ` [PATCH v3 12/32] drm/exynos: Split manager/display/subdrv Sean Paul
2013-10-31 10:30 ` Inki Dae
2013-10-31 16:08 ` Sean Paul
2013-11-01 4:20 ` Inki Dae
2013-11-10 21:09 ` Tomasz Figa
2013-11-12 17:51 ` Sean Paul
2013-11-12 18:35 ` Tomasz Figa
2013-11-26 18:00 ` Olof Johansson
2013-11-27 10:04 ` Thierry Reding
2013-11-28 23:04 ` Tomasz Figa
2013-11-29 7:52 ` Daniel Vetter
2013-11-29 9:10 ` Tomasz Figa
2013-11-29 10:25 ` Daniel Vetter
2013-11-29 14:13 ` Rob Clark
2013-11-29 17:05 ` Tomasz Figa
2013-11-29 18:35 ` Rob Clark
2013-11-30 5:25 ` Inki Dae
2013-12-03 21:38 ` Sean Paul
2013-11-29 10:16 ` Thierry Reding
2013-10-29 16:12 ` [PATCH v3 13/32] drm/exynos: hdmi: remove the i2c drivers and use devtree Sean Paul
2013-11-10 20:46 ` Tomasz Figa
2013-11-11 8:44 ` Thierry Reding
2013-11-28 13:30 ` Tomasz Figa
2013-11-29 10:24 ` Thierry Reding
2013-12-03 0:37 ` Olof Johansson
2013-10-29 16:13 ` [PATCH v3 14/32] drm/exynos: Remove exynos_drm_hdmi shim Sean Paul
2013-11-10 21:24 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 15/32] drm/exynos: Use drm_mode_copy to copy modes Sean Paul
2013-11-10 21:27 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 16/32] drm/exynos: Disable unused crtc planes from crtc Sean Paul
2013-11-10 21:29 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 17/32] drm/exynos: Add mode_set manager operation Sean Paul
2013-11-10 21:31 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 18/32] drm/exynos: Implement mode_fixup " Sean Paul
2013-11-10 21:33 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 19/32] drm/exynos: Use mode_set to configure fimd Sean Paul
2013-11-10 22:03 ` Tomasz Figa
2013-11-15 13:49 ` Daniel Kurtz
2013-11-15 13:53 ` Daniel Kurtz
2013-11-28 22:57 ` Tomasz Figa
2013-12-04 22:37 ` Sean Paul
2013-10-29 16:13 ` [PATCH v3 20/32] drm/exynos: Remove unused/useless fimd_context members Sean Paul
2013-11-11 1:19 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 21/32] drm/exynos: Move dp driver from video/ to drm/ Sean Paul
2013-10-31 10:46 ` Inki Dae
2013-10-31 16:05 ` Sean Paul [this message]
2013-10-31 23:06 ` Jingoo Han
2013-10-31 23:06 ` Jingoo Han
2013-10-31 23:11 ` Tomasz Figa
2013-10-31 23:11 ` Tomasz Figa
2013-10-31 23:23 ` Jingoo Han
2013-10-31 23:23 ` Jingoo Han
2013-10-31 23:27 ` Tomasz Figa
2013-10-31 23:27 ` Tomasz Figa
2013-10-31 23:55 ` Jingoo Han
2013-10-31 23:55 ` Jingoo Han
2013-11-01 0:01 ` Tomasz Figa
2013-11-01 0:01 ` Tomasz Figa
[not found] ` <3513711.0qTZKxmOZX@flatron>
2013-12-04 23:07 ` Sean Paul
2013-10-29 16:13 ` [PATCH v3 22/32] drm/exynos: Move display implementation into dp Sean Paul
[not found] ` <1383063198-10526-23-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2013-11-11 1:53 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 23/32] ARM: dts: Move display-timings node from fimd to dp Sean Paul
2013-10-29 16:13 ` [PATCH v3 24/32] drm/exynos: Implement dpms display callback in DP Sean Paul
2013-11-11 2:04 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 25/32] drm/exynos: Clean up FIMD power on/off routines Sean Paul
2013-10-31 10:54 ` Inki Dae
[not found] ` <1630995.NnKzZB9Rl5@flatron>
2013-11-11 4:08 ` Inki Dae
2013-11-11 2:09 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 26/32] drm/exynos: Consolidate suspend/resume in drm_drv Sean Paul
2013-11-29 14:58 ` Tomasz Figa
2013-12-19 16:48 ` Inki Dae
2013-10-29 16:13 ` [PATCH v3 27/32] drm/exynos: Add create_connector callback Sean Paul
2013-11-11 2:19 ` Tomasz Figa
2013-12-03 5:01 ` Inki Dae
2013-10-29 16:13 ` [PATCH v3 28/32] drm/exynos: Implement drm_connector in hdmi directly Sean Paul
2013-11-29 15:58 ` Tomasz Figa
2013-12-02 9:46 ` Thierry Reding
2013-12-02 9:54 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 29/32] drm/exynos: Implement drm_connector directly in dp driver Sean Paul
2013-11-29 16:04 ` Tomasz Figa
2013-12-03 4:45 ` Inki Dae
2013-12-04 6:46 ` Inki Dae
2013-10-29 16:13 ` [PATCH v3 30/32] drm/exynos: Implement drm_connector directly in vidi driver Sean Paul
2013-11-29 16:13 ` Tomasz Figa
2013-12-03 4:47 ` Inki Dae
2013-12-04 6:47 ` Inki Dae
2013-10-29 16:13 ` [PATCH v3 31/32] drm/exynos: Move lvds bridge discovery into DP driver Sean Paul
2013-11-29 16:55 ` Tomasz Figa
2013-11-30 5:18 ` Inki Dae
2013-11-30 12:27 ` Tomasz Figa
2013-10-29 16:13 ` [PATCH v3 32/32] drm/exynos: Remove the exynos_drm_connector shim Sean Paul
2013-11-29 16:14 ` Tomasz Figa
2013-11-07 5:48 ` [PATCH v3 00/32] drm/exynos: Refactor parts of the exynos driver Inki Dae
2013-11-07 18:20 ` Sean Paul
2013-11-08 21:01 ` Tomasz Figa
2013-11-08 21:22 ` Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAOw6vbKwYbDk-SVBhKXfdmGK3Ph+JKLB5aR79oCHhjReGMHgAQ@mail.gmail.com \
--to=seanpaul@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=inki.dae@samsung.com \
--cc=jg1.han@samsung.com \
--cc=marcheu@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.