From: Andrew Lunn <andrew@lunn.ch>
To: Jason Cooper <jason@lakedaemon.net>, kishon@ti.com
Cc: devicetree@vger.kernel.org, linux-ide@vger.kernel.org,
Gregory Clement <gregory.clement@free-electrons.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>,
linux ARM <linux-arm-kernel@lists.infradead.org>,
Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH v2 0/4] PHY driver for Marvell SATA
Date: Thu, 5 Dec 2013 17:50:59 +0100 [thread overview]
Message-ID: <1386262263-18956-1-git-send-email-andrew@lunn.ch> (raw)
This second version addresses most of the points raised during review.
What has not been changed is the phy-names property. This is awaiting
feedback on my comment that the naming follows how clocks are named in
the driver & DT binding. For this reason i've also not added the
Ack-by: received in the review comments.
Andrew Lunn (4):
Phy: DT binding documentation for Marvell MVEBU SATA phy.
Phy: Add a PHY driver for Marvell MVEBU SATA PHY.
SATA: MV: Add support for the optional PHYs
Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
Documentation/devicetree/bindings/ata/marvell.txt | 6 +
.../devicetree/bindings/phy/phy-mvebu.txt | 22 ++++
arch/arm/boot/dts/dove.dtsi | 11 ++
arch/arm/boot/dts/kirkwood-6281.dtsi | 2 +
arch/arm/boot/dts/kirkwood-6282.dtsi | 2 +
arch/arm/boot/dts/kirkwood.dtsi | 18 +++
drivers/ata/sata_mv.c | 19 +++
drivers/phy/Kconfig | 6 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-mvebu-sata.c | 137 +++++++++++++++++++++
10 files changed, 224 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu.txt
create mode 100644 drivers/phy/phy-mvebu-sata.c
--
1.8.5
WARNING: multiple messages have this Message-ID (diff)
From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/4] PHY driver for Marvell SATA
Date: Thu, 5 Dec 2013 17:50:59 +0100 [thread overview]
Message-ID: <1386262263-18956-1-git-send-email-andrew@lunn.ch> (raw)
This second version addresses most of the points raised during review.
What has not been changed is the phy-names property. This is awaiting
feedback on my comment that the naming follows how clocks are named in
the driver & DT binding. For this reason i've also not added the
Ack-by: received in the review comments.
Andrew Lunn (4):
Phy: DT binding documentation for Marvell MVEBU SATA phy.
Phy: Add a PHY driver for Marvell MVEBU SATA PHY.
SATA: MV: Add support for the optional PHYs
Phy: Add DT nodes on kirkwood and Dove for the SATA PHY
Documentation/devicetree/bindings/ata/marvell.txt | 6 +
.../devicetree/bindings/phy/phy-mvebu.txt | 22 ++++
arch/arm/boot/dts/dove.dtsi | 11 ++
arch/arm/boot/dts/kirkwood-6281.dtsi | 2 +
arch/arm/boot/dts/kirkwood-6282.dtsi | 2 +
arch/arm/boot/dts/kirkwood.dtsi | 18 +++
drivers/ata/sata_mv.c | 19 +++
drivers/phy/Kconfig | 6 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-mvebu-sata.c | 137 +++++++++++++++++++++
10 files changed, 224 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu.txt
create mode 100644 drivers/phy/phy-mvebu-sata.c
--
1.8.5
next reply other threads:[~2013-12-05 16:51 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-05 16:50 Andrew Lunn [this message]
2013-12-05 16:50 ` [PATCH v2 0/4] PHY driver for Marvell SATA Andrew Lunn
[not found] ` <1386262263-18956-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2013-12-05 16:51 ` [PATCH v2 1/4] Phy: DT binding documentation for Marvell MVEBU SATA phy Andrew Lunn
2013-12-05 16:51 ` Andrew Lunn
2013-12-05 18:16 ` Jason Cooper
2013-12-05 18:16 ` Jason Cooper
2013-12-05 16:51 ` [PATCH v2 2/4] Phy: Add a PHY driver for Marvell MVEBU SATA PHY Andrew Lunn
2013-12-05 16:51 ` Andrew Lunn
2013-12-05 16:51 ` [PATCH v2 3/4] SATA: MV: Add support for the optional PHYs Andrew Lunn
2013-12-05 16:51 ` Andrew Lunn
2013-12-05 16:51 ` [PATCH v2 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY Andrew Lunn
2013-12-05 16:51 ` Andrew Lunn
2013-12-05 18:18 ` Jason Cooper
2013-12-05 18:18 ` Jason Cooper
2013-12-08 1:09 ` [PATCH v2 0/4] PHY driver for Marvell SATA Jason Cooper
2013-12-08 1:09 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386262263-18956-1-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=sebastian.hesselbarth@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.