From: Tanmay Inamdar <tinamdar@apm.com> To: Bjorn Helgaas <bhelgaas@google.com>, Arnd Bergmann <arnd@arndb.de>, Jason Gunthorpe <jgunthorpe@obsidianresearch.com>, Grant Likely <grant.likely@linaro.org>, Rob Herring <robh+dt@kernel.org>, Catalin Marinas <catalin.marinas@arm.com>, Rob Landley <rob@landley.net> Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, patches@apm.com, jcm@redhat.com, Tanmay Inamdar <tinamdar@apm.com> Subject: [RFC PATCH V2 3/4] dt-bindings: pci: xgene pcie device tree bindings Date: Tue, 14 Jan 2014 15:34:17 -0800 [thread overview] Message-ID: <1389742458-7693-4-git-send-email-tinamdar@apm.com> (raw) In-Reply-To: <1389742458-7693-1-git-send-email-tinamdar@apm.com> This patch adds the bindings for X-Gene PCIe driver. The driver resides under 'drivers/pci/host/pci-xgene.c' file. Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> --- .../devicetree/bindings/pci/xgene-pcie.txt | 45 ++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/xgene-pcie.txt diff --git a/Documentation/devicetree/bindings/pci/xgene-pcie.txt b/Documentation/devicetree/bindings/pci/xgene-pcie.txt new file mode 100644 index 0000000..19b9c28 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xgene-pcie.txt @@ -0,0 +1,45 @@ +* AppliedMicro X-Gene PCIe interface + +Required properties: +- status: Either "ok" or "disabled". +- device_type: set to "pci" +- compatible: should contain "xgene,pcie" to identify the core. +- reg: base addresses and lengths of the pcie controller configuration + space register. +- #address-cells: set to <3> +- #size-cells: set to <2> +- ranges: ranges for the outbound memory, I/O regions. +- dma-ranges: ranges for the inbound memory regions. +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt + numbers. +- clocks: from common clock binding: handle to pci clock. + +Example: + +SoC specific DT Entry: + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 + 0xe0 0xd0000000 0x0 0x00200000>; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + clocks = <&pcie0clk 0>; + }; + +Board specific DT Entry: + &pcie0 { + status = "ok"; + }; -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: tinamdar@apm.com (Tanmay Inamdar) To: linux-arm-kernel@lists.infradead.org Subject: [RFC PATCH V2 3/4] dt-bindings: pci: xgene pcie device tree bindings Date: Tue, 14 Jan 2014 15:34:17 -0800 [thread overview] Message-ID: <1389742458-7693-4-git-send-email-tinamdar@apm.com> (raw) In-Reply-To: <1389742458-7693-1-git-send-email-tinamdar@apm.com> This patch adds the bindings for X-Gene PCIe driver. The driver resides under 'drivers/pci/host/pci-xgene.c' file. Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> --- .../devicetree/bindings/pci/xgene-pcie.txt | 45 ++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/xgene-pcie.txt diff --git a/Documentation/devicetree/bindings/pci/xgene-pcie.txt b/Documentation/devicetree/bindings/pci/xgene-pcie.txt new file mode 100644 index 0000000..19b9c28 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/xgene-pcie.txt @@ -0,0 +1,45 @@ +* AppliedMicro X-Gene PCIe interface + +Required properties: +- status: Either "ok" or "disabled". +- device_type: set to "pci" +- compatible: should contain "xgene,pcie" to identify the core. +- reg: base addresses and lengths of the pcie controller configuration + space register. +- #address-cells: set to <3> +- #size-cells: set to <2> +- ranges: ranges for the outbound memory, I/O regions. +- dma-ranges: ranges for the inbound memory regions. +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt + numbers. +- clocks: from common clock binding: handle to pci clock. + +Example: + +SoC specific DT Entry: + pcie0: pcie at 1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 + 0xe0 0xd0000000 0x0 0x00200000>; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x00000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x10000000 0xe0 0x10000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x40 0x00000000 0x40 0x00000000 0x40 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + clocks = <&pcie0clk 0>; + }; + +Board specific DT Entry: + &pcie0 { + status = "ok"; + }; -- 1.7.9.5
next prev parent reply other threads:[~2014-01-14 23:35 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-01-14 23:34 [RFC PATCH V2 0/4] APM X-Gene PCIe controller Tanmay Inamdar 2014-01-14 23:34 ` Tanmay Inamdar 2014-01-14 23:34 ` [RFC PATCH V2 1/4] pci: APM X-Gene PCIe controller driver Tanmay Inamdar 2014-01-14 23:34 ` Tanmay Inamdar 2014-01-15 12:39 ` Arnd Bergmann 2014-01-15 12:39 ` Arnd Bergmann 2014-01-17 1:10 ` Tanmay Inamdar 2014-01-17 1:10 ` Tanmay Inamdar 2014-01-17 1:10 ` Tanmay Inamdar 2014-01-17 15:07 ` Arnd Bergmann 2014-01-17 15:07 ` Arnd Bergmann 2014-01-17 15:07 ` Arnd Bergmann 2014-01-17 15:07 ` Arnd Bergmann 2014-01-24 21:28 ` Tanmay Inamdar 2014-01-24 21:28 ` Tanmay Inamdar 2014-01-24 21:28 ` Tanmay Inamdar 2014-01-25 20:11 ` Arnd Bergmann 2014-01-25 20:11 ` Arnd Bergmann 2014-01-27 22:54 ` Tanmay Inamdar 2014-01-27 22:54 ` Tanmay Inamdar 2014-01-27 22:54 ` Tanmay Inamdar 2014-01-29 19:36 ` Arnd Bergmann 2014-01-29 19:36 ` Arnd Bergmann 2014-01-29 19:36 ` Arnd Bergmann 2014-01-29 19:36 ` Arnd Bergmann 2014-01-28 0:55 ` Bjorn Helgaas 2014-01-28 0:55 ` Bjorn Helgaas 2014-01-28 2:02 ` Tanmay Inamdar 2014-01-28 2:02 ` Tanmay Inamdar 2014-01-14 23:34 ` [RFC PATCH V2 2/4] arm64:dts: APM X-Gene PCIe device tree nodes Tanmay Inamdar 2014-01-14 23:34 ` Tanmay Inamdar 2014-01-14 23:34 ` Tanmay Inamdar [this message] 2014-01-14 23:34 ` [RFC PATCH V2 3/4] dt-bindings: pci: xgene pcie device tree bindings Tanmay Inamdar 2014-01-15 9:57 ` Arnd Bergmann 2014-01-15 9:57 ` Arnd Bergmann 2014-01-15 9:57 ` Arnd Bergmann 2014-01-17 1:17 ` Tanmay Inamdar 2014-01-17 1:17 ` Tanmay Inamdar 2014-01-17 1:17 ` Tanmay Inamdar 2014-01-14 23:34 ` [RFC PATCH V2 4/4] MAINTAINERS: entry for APM X-Gene PCIe host driver Tanmay Inamdar 2014-01-14 23:34 ` Tanmay Inamdar 2014-01-14 23:34 ` Tanmay Inamdar
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1389742458-7693-4-git-send-email-tinamdar@apm.com \ --to=tinamdar@apm.com \ --cc=arnd@arndb.de \ --cc=bhelgaas@google.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=grant.likely@linaro.org \ --cc=jcm@redhat.com \ --cc=jgunthorpe@obsidianresearch.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=patches@apm.com \ --cc=rob@landley.net \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.