[PATCH v3 2/5] ARM: sun6i: dt: Add PLL6 and SPI module clocks

From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Mark Brown <broonie@kernel.org>,
	Mike Turquette <mturquette@linaro.org>,
	Emilio Lopez <emilio@elopez.com.ar>
Cc: linux-sunxi@googlegroups.com, linux-spi@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, kevin.z.m.zh@gmail.com,
	sunny@allwinnertech.com, shuge@allwinnertech.com,
	zhuzhenhua@allwinnertech.com,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH v3 2/5] ARM: sun6i: dt: Add PLL6 and SPI module clocks
Date: Fri, 31 Jan 2014 11:55:49 +0100	[thread overview]
Message-ID: <1391165752-1819-3-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1391165752-1819-1-git-send-email-maxime.ripard@free-electrons.com>

The module clocks in the A31 are still compatible with the A10 one. Add the SPI
module clocks and the PLL6 in the device tree to allow their use by the SPI
controllers.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/sun6i-a31.dtsi | 46 ++++++++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 5256ad9..0eea325 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -73,16 +73,12 @@
 			clocks = <&osc24M>;
 		};
 
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		pll6: pll6 {
+		pll6: clk@01c20028 {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6";
 		};
 
 		cpu: cpu@01c20050 {
@@ -182,6 +178,38 @@
 					"apb2_uart1", "apb2_uart2", "apb2_uart3",
 					"apb2_uart4", "apb2_uart5";
 		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi2";
+		};
+
+		spi3_clk: clk@01c200ac {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-mod0-clk";
+			reg = <0x01c200ac 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "spi3";
+		};
 	};
 
 	soc@01c00000 {
-- 
1.8.4.2

