From: Stephen Boyd <sboyd@codeaurora.org>
To: Kumar Gala <galak@codeaurora.org>
Cc: Saravana Kannan <skannan@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: dts: qcom: Add GDSC nodes underneath clock controller
Date: Fri, 4 Apr 2014 11:45:35 -0700 [thread overview]
Message-ID: <1396637136-29974-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1396637136-29974-1-git-send-email-sboyd@codeaurora.org>
Add nodes for the GDSCs present on the multimedia clock
controller in 8974.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 18 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 26 ++++++++++++++++++++++++++
2 files changed, 44 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 13ac3e222495..478e89de0f38 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -3,4 +3,22 @@
/ {
model = "Qualcomm APQ8074 Dragonboard";
compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+};
+
+&gdsc_venus {
+ qcom,skip-logic-collapse;
+ qcom,retain-periph;
+ qcom,retain-mem;
+};
+
+&gdsc_mdss {
+ qcom,skip-logic-collapse;
+ qcom,retain-periph;
+ qcom,retain-mem;
+};
+
+&gdsc_oxili_gx {
+ qcom,retain-mem;
+ qcom,retain-periph;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 9e5dadb101eb..e38ae30930b2 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -108,6 +108,32 @@
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0xfd8c0000 0x6000>;
+
+ regulators {
+ gdsc_venus: gdsc_venus {
+ regulator-name = "gdsc_venus";
+ };
+
+ gdsc_mdss: gdsc_mdss {
+ regulator-name = "gdsc_mdss";
+ };
+
+ gdsc_jpeg: gdsc_jpeg {
+ regulator-name = "gdsc_jpeg";
+ };
+
+ gdsc_vfe: gdsc_vfe {
+ regulator-name = "gdsc_vfe";
+ };
+
+ gdsc_oxili_gx: gdsc_oxili_gx {
+ regulator-name = "gdsc_oxili_gx";
+ };
+
+ gdsc_oxili_cx: gdsc_oxili_cx {
+ regulator-name = "gdsc_oxili_cx";
+ };
+ };
};
serial@f991e000 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Boyd <sboyd@codeaurora.org>
To: Kumar Gala <galak@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Mark Brown <broonie@kernel.org>,
Saravana Kannan <skannan@codeaurora.org>,
Mike Turquette <mturquette@linaro.org>
Subject: [PATCH 3/4] ARM: dts: qcom: Add GDSC nodes underneath clock controller
Date: Fri, 4 Apr 2014 11:45:35 -0700 [thread overview]
Message-ID: <1396637136-29974-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1396637136-29974-1-git-send-email-sboyd@codeaurora.org>
Add nodes for the GDSCs present on the multimedia clock
controller in 8974.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 18 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 26 ++++++++++++++++++++++++++
2 files changed, 44 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 13ac3e222495..478e89de0f38 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -3,4 +3,22 @@
/ {
model = "Qualcomm APQ8074 Dragonboard";
compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+};
+
+&gdsc_venus {
+ qcom,skip-logic-collapse;
+ qcom,retain-periph;
+ qcom,retain-mem;
+};
+
+&gdsc_mdss {
+ qcom,skip-logic-collapse;
+ qcom,retain-periph;
+ qcom,retain-mem;
+};
+
+&gdsc_oxili_gx {
+ qcom,retain-mem;
+ qcom,retain-periph;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 9e5dadb101eb..e38ae30930b2 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -108,6 +108,32 @@
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0xfd8c0000 0x6000>;
+
+ regulators {
+ gdsc_venus: gdsc_venus {
+ regulator-name = "gdsc_venus";
+ };
+
+ gdsc_mdss: gdsc_mdss {
+ regulator-name = "gdsc_mdss";
+ };
+
+ gdsc_jpeg: gdsc_jpeg {
+ regulator-name = "gdsc_jpeg";
+ };
+
+ gdsc_vfe: gdsc_vfe {
+ regulator-name = "gdsc_vfe";
+ };
+
+ gdsc_oxili_gx: gdsc_oxili_gx {
+ regulator-name = "gdsc_oxili_gx";
+ };
+
+ gdsc_oxili_cx: gdsc_oxili_cx {
+ regulator-name = "gdsc_oxili_cx";
+ };
+ };
};
serial@f991e000 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: dts: qcom: Add GDSC nodes underneath clock controller
Date: Fri, 4 Apr 2014 11:45:35 -0700 [thread overview]
Message-ID: <1396637136-29974-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1396637136-29974-1-git-send-email-sboyd@codeaurora.org>
Add nodes for the GDSCs present on the multimedia clock
controller in 8974.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 18 ++++++++++++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 26 ++++++++++++++++++++++++++
2 files changed, 44 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 13ac3e222495..478e89de0f38 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -3,4 +3,22 @@
/ {
model = "Qualcomm APQ8074 Dragonboard";
compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+};
+
+&gdsc_venus {
+ qcom,skip-logic-collapse;
+ qcom,retain-periph;
+ qcom,retain-mem;
+};
+
+&gdsc_mdss {
+ qcom,skip-logic-collapse;
+ qcom,retain-periph;
+ qcom,retain-mem;
+};
+
+&gdsc_oxili_gx {
+ qcom,retain-mem;
+ qcom,retain-periph;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 9e5dadb101eb..e38ae30930b2 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -108,6 +108,32 @@
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0xfd8c0000 0x6000>;
+
+ regulators {
+ gdsc_venus: gdsc_venus {
+ regulator-name = "gdsc_venus";
+ };
+
+ gdsc_mdss: gdsc_mdss {
+ regulator-name = "gdsc_mdss";
+ };
+
+ gdsc_jpeg: gdsc_jpeg {
+ regulator-name = "gdsc_jpeg";
+ };
+
+ gdsc_vfe: gdsc_vfe {
+ regulator-name = "gdsc_vfe";
+ };
+
+ gdsc_oxili_gx: gdsc_oxili_gx {
+ regulator-name = "gdsc_oxili_gx";
+ };
+
+ gdsc_oxili_cx: gdsc_oxili_cx {
+ regulator-name = "gdsc_oxili_cx";
+ };
+ };
};
serial at f991e000 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2014-04-04 18:45 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-04 18:45 [PATCH 0/4] Support qcom GDSC hardware Stephen Boyd
2014-04-04 18:45 ` Stephen Boyd
2014-04-04 18:45 ` [PATCH 1/4] clk: qcom: Add support for GDSCs Stephen Boyd
2014-04-04 18:45 ` Stephen Boyd
2014-04-04 18:45 ` Stephen Boyd
2014-04-04 18:45 ` [PATCH 2/4] clk: qcom: Add GDSCs within 8974 multimedia clock controller Stephen Boyd
2014-04-04 18:45 ` Stephen Boyd
2014-04-04 18:45 ` Stephen Boyd [this message]
2014-04-04 18:45 ` [PATCH 3/4] ARM: dts: qcom: Add GDSC nodes underneath " Stephen Boyd
2014-04-04 18:45 ` Stephen Boyd
2014-04-04 18:45 ` [PATCH 4/4] devicetree: bindings: qcom,mmcc: Document GDSC binding Stephen Boyd
2014-04-04 18:45 ` Stephen Boyd
2014-04-04 18:45 ` Stephen Boyd
2014-04-29 7:07 ` [PATCH 4/4] devicetree: bindings: qcom, mmcc: " Mike Turquette
2014-04-29 7:07 ` Mike Turquette
2014-04-30 21:16 ` [PATCH 4/4] devicetree: bindings: qcom,mmcc: " Stephen Boyd
2014-04-30 21:16 ` Stephen Boyd
2014-04-15 17:56 ` [PATCH 0/4] Support qcom GDSC hardware Stephen Boyd
2014-04-15 17:56 ` Stephen Boyd
2014-12-19 8:01 ` Ivan T. Ivanov
2014-12-19 8:01 ` Ivan T. Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396637136-29974-4-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=broonie@kernel.org \
--cc=galak@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=skannan@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.