From: Markus Pargmann <mpa@pengutronix.de>
To: Mark Brown <broonie@kernel.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
alsa-devel@alsa-project.org, Alexander Shiyan <shc_work@mail.ru>,
Timur Tabi <timur@tabi.org>,
"Li.Xiubo@freescale.com" <Li.Xiubo@freescale.com>,
kernel@pengutronix.de, Nicolin Chen <Guangyu.Chen@freescale.com>,
Markus Pargmann <mpa@pengutronix.de>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 04/18] ASoC: fsl-ssi: Move imx-specific probe to seperate function
Date: Mon, 14 Apr 2014 15:35:34 +0200 [thread overview]
Message-ID: <1397482548-28463-5-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1397482548-28463-1-git-send-email-mpa@pengutronix.de>
Move imx specific probe code to a seperate function. It reduces the
size of the probe() function and makes the code and error handling
easier to understand.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
sound/soc/fsl/fsl_ssi.c | 185 +++++++++++++++++++++++++++---------------------
1 file changed, 103 insertions(+), 82 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 65d9da1..418c646 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -992,6 +992,100 @@ static void make_lowercase(char *s)
}
}
+static int fsl_ssi_imx_probe(struct platform_device *pdev,
+ struct fsl_ssi_private *ssi_private)
+{
+ struct device_node *np = pdev->dev.of_node;
+ u32 dma_events[2], dmas[4];
+ bool shared;
+ int ret;
+
+ ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ssi_private->clk)) {
+ ret = PTR_ERR(ssi_private->clk);
+ dev_err(&pdev->dev, "could not get clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(ssi_private->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret);
+ return ret;
+ }
+
+ /* For those SLAVE implementations, we ingore non-baudclk cases
+ * and, instead, abandon MASTER mode that needs baud clock.
+ */
+ ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
+ if (IS_ERR(ssi_private->baudclk))
+ dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
+ PTR_ERR(ssi_private->baudclk));
+ else
+ clk_prepare_enable(ssi_private->baudclk);
+
+ /*
+ * We have burstsize be "fifo_depth - 2" to match the SSI
+ * watermark setting in fsl_ssi_startup().
+ */
+ ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2;
+ ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2;
+ ssi_private->dma_params_tx.addr = ssi_private->ssi_phys +
+ offsetof(struct ccsr_ssi, stx0);
+ ssi_private->dma_params_rx.addr = ssi_private->ssi_phys +
+ offsetof(struct ccsr_ssi, srx0);
+ ssi_private->dma_params_tx.filter_data = &ssi_private->filter_data_tx;
+ ssi_private->dma_params_rx.filter_data = &ssi_private->filter_data_rx;
+
+ if (!of_property_read_bool(pdev->dev.of_node, "dmas") &&
+ ssi_private->use_dma) {
+ /*
+ * FIXME: This is a temporary solution until all
+ * necessary dma drivers support the generic dma
+ * bindings.
+ */
+ ret = of_property_read_u32_array(pdev->dev.of_node,
+ "fsl,ssi-dma-events", dma_events, 2);
+ if (ret && ssi_private->use_dma) {
+ dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n");
+ goto error_dma_events;
+ }
+ }
+ /* Should this be merge with the above? */
+ if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
+ && dmas[2] == IMX_DMATYPE_SSI_DUAL) {
+ ssi_private->use_dual_fifo = true;
+ /* When using dual fifo mode, we need to keep watermark
+ * as even numbers due to dma script limitation.
+ */
+ ssi_private->dma_params_tx.maxburst &= ~0x1;
+ ssi_private->dma_params_rx.maxburst &= ~0x1;
+ }
+
+ shared = of_device_is_compatible(of_get_parent(np), "fsl,spba-bus");
+
+ imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx,
+ dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+ imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
+ dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+
+ return 0;
+
+error_dma_events:
+ if (!IS_ERR(ssi_private->baudclk))
+ clk_disable_unprepare(ssi_private->baudclk);
+ clk_disable_unprepare(ssi_private->clk);
+
+ return ret;
+}
+
+static void fsl_ssi_imx_clean(struct platform_device *pdev,
+ struct fsl_ssi_private *ssi_private)
+{
+ if (!IS_ERR(ssi_private->baudclk))
+ clk_disable_unprepare(ssi_private->baudclk);
+ clk_disable_unprepare(ssi_private->clk);
+}
+
static int fsl_ssi_probe(struct platform_device *pdev)
{
struct fsl_ssi_private *ssi_private;
@@ -1004,7 +1098,6 @@ static int fsl_ssi_probe(struct platform_device *pdev)
const uint32_t *iprop;
struct resource res;
char name[64];
- bool shared;
bool ac97 = false;
/* SSIs that are not connected on the board should have a
@@ -1118,80 +1211,11 @@ static int fsl_ssi_probe(struct platform_device *pdev)
if (hw_type == FSL_SSI_MX21 || hw_type == FSL_SSI_MX51 ||
hw_type == FSL_SSI_MX35) {
- u32 dma_events[2], dmas[4];
ssi_private->ssi_on_imx = true;
- ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(ssi_private->clk)) {
- ret = PTR_ERR(ssi_private->clk);
- dev_err(&pdev->dev, "could not get clock: %d\n", ret);
+ ret = fsl_ssi_imx_probe(pdev, ssi_private);
+ if (ret)
goto error_irqmap;
- }
- ret = clk_prepare_enable(ssi_private->clk);
- if (ret) {
- dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n",
- ret);
- goto error_irqmap;
- }
-
- /* For those SLAVE implementations, we ingore non-baudclk cases
- * and, instead, abandon MASTER mode that needs baud clock.
- */
- ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
- if (IS_ERR(ssi_private->baudclk))
- dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
- PTR_ERR(ssi_private->baudclk));
- else
- clk_prepare_enable(ssi_private->baudclk);
-
- /*
- * We have burstsize be "fifo_depth - 2" to match the SSI
- * watermark setting in fsl_ssi_startup().
- */
- ssi_private->dma_params_tx.maxburst =
- ssi_private->fifo_depth - 2;
- ssi_private->dma_params_rx.maxburst =
- ssi_private->fifo_depth - 2;
- ssi_private->dma_params_tx.addr =
- ssi_private->ssi_phys + offsetof(struct ccsr_ssi, stx0);
- ssi_private->dma_params_rx.addr =
- ssi_private->ssi_phys + offsetof(struct ccsr_ssi, srx0);
- ssi_private->dma_params_tx.filter_data =
- &ssi_private->filter_data_tx;
- ssi_private->dma_params_rx.filter_data =
- &ssi_private->filter_data_rx;
- if (!of_property_read_bool(pdev->dev.of_node, "dmas") &&
- ssi_private->use_dma) {
- /*
- * FIXME: This is a temporary solution until all
- * necessary dma drivers support the generic dma
- * bindings.
- */
- ret = of_property_read_u32_array(pdev->dev.of_node,
- "fsl,ssi-dma-events", dma_events, 2);
- if (ret && ssi_private->use_dma) {
- dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n");
- goto error_clk;
- }
- }
- /* Should this be merge with the above? */
- if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
- && dmas[2] == IMX_DMATYPE_SSI_DUAL) {
- ssi_private->use_dual_fifo = true;
- /* When using dual fifo mode, we need to keep watermark
- * as even numbers due to dma script limitation.
- */
- ssi_private->dma_params_tx.maxburst &= ~0x1;
- ssi_private->dma_params_rx.maxburst &= ~0x1;
- }
-
- shared = of_device_is_compatible(of_get_parent(np),
- "fsl,spba-bus");
-
- imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx,
- dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
- imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
- dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
}
/*
@@ -1206,7 +1230,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
if (ret < 0) {
dev_err(&pdev->dev, "could not claim irq %u\n",
ssi_private->irq);
- goto error_clk;
+ goto error_irq;
}
}
@@ -1298,11 +1322,9 @@ error_dbgfs:
error_dev:
device_remove_file(&pdev->dev, dev_attr);
-error_clk:
+error_irq:
if (ssi_private->ssi_on_imx) {
- if (!IS_ERR(ssi_private->baudclk))
- clk_disable_unprepare(ssi_private->baudclk);
- clk_disable_unprepare(ssi_private->clk);
+ fsl_ssi_imx_clean(pdev, ssi_private);
}
error_irqmap:
@@ -1321,11 +1343,10 @@ static int fsl_ssi_remove(struct platform_device *pdev)
if (!ssi_private->new_binding)
platform_device_unregister(ssi_private->pdev);
snd_soc_unregister_component(&pdev->dev);
- if (ssi_private->ssi_on_imx) {
- if (!IS_ERR(ssi_private->baudclk))
- clk_disable_unprepare(ssi_private->baudclk);
- clk_disable_unprepare(ssi_private->clk);
- }
+
+ if (ssi_private->ssi_on_imx)
+ fsl_ssi_imx_clean(pdev, ssi_private);
+
if (ssi_private->irq_stats)
irq_dispose_mapping(ssi_private->irq);
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 04/18] ASoC: fsl-ssi: Move imx-specific probe to seperate function
Date: Mon, 14 Apr 2014 15:35:34 +0200 [thread overview]
Message-ID: <1397482548-28463-5-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1397482548-28463-1-git-send-email-mpa@pengutronix.de>
Move imx specific probe code to a seperate function. It reduces the
size of the probe() function and makes the code and error handling
easier to understand.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
sound/soc/fsl/fsl_ssi.c | 185 +++++++++++++++++++++++++++---------------------
1 file changed, 103 insertions(+), 82 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 65d9da1..418c646 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -992,6 +992,100 @@ static void make_lowercase(char *s)
}
}
+static int fsl_ssi_imx_probe(struct platform_device *pdev,
+ struct fsl_ssi_private *ssi_private)
+{
+ struct device_node *np = pdev->dev.of_node;
+ u32 dma_events[2], dmas[4];
+ bool shared;
+ int ret;
+
+ ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ssi_private->clk)) {
+ ret = PTR_ERR(ssi_private->clk);
+ dev_err(&pdev->dev, "could not get clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(ssi_private->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret);
+ return ret;
+ }
+
+ /* For those SLAVE implementations, we ingore non-baudclk cases
+ * and, instead, abandon MASTER mode that needs baud clock.
+ */
+ ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
+ if (IS_ERR(ssi_private->baudclk))
+ dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
+ PTR_ERR(ssi_private->baudclk));
+ else
+ clk_prepare_enable(ssi_private->baudclk);
+
+ /*
+ * We have burstsize be "fifo_depth - 2" to match the SSI
+ * watermark setting in fsl_ssi_startup().
+ */
+ ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2;
+ ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2;
+ ssi_private->dma_params_tx.addr = ssi_private->ssi_phys +
+ offsetof(struct ccsr_ssi, stx0);
+ ssi_private->dma_params_rx.addr = ssi_private->ssi_phys +
+ offsetof(struct ccsr_ssi, srx0);
+ ssi_private->dma_params_tx.filter_data = &ssi_private->filter_data_tx;
+ ssi_private->dma_params_rx.filter_data = &ssi_private->filter_data_rx;
+
+ if (!of_property_read_bool(pdev->dev.of_node, "dmas") &&
+ ssi_private->use_dma) {
+ /*
+ * FIXME: This is a temporary solution until all
+ * necessary dma drivers support the generic dma
+ * bindings.
+ */
+ ret = of_property_read_u32_array(pdev->dev.of_node,
+ "fsl,ssi-dma-events", dma_events, 2);
+ if (ret && ssi_private->use_dma) {
+ dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n");
+ goto error_dma_events;
+ }
+ }
+ /* Should this be merge with the above? */
+ if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
+ && dmas[2] == IMX_DMATYPE_SSI_DUAL) {
+ ssi_private->use_dual_fifo = true;
+ /* When using dual fifo mode, we need to keep watermark
+ * as even numbers due to dma script limitation.
+ */
+ ssi_private->dma_params_tx.maxburst &= ~0x1;
+ ssi_private->dma_params_rx.maxburst &= ~0x1;
+ }
+
+ shared = of_device_is_compatible(of_get_parent(np), "fsl,spba-bus");
+
+ imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx,
+ dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+ imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
+ dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+
+ return 0;
+
+error_dma_events:
+ if (!IS_ERR(ssi_private->baudclk))
+ clk_disable_unprepare(ssi_private->baudclk);
+ clk_disable_unprepare(ssi_private->clk);
+
+ return ret;
+}
+
+static void fsl_ssi_imx_clean(struct platform_device *pdev,
+ struct fsl_ssi_private *ssi_private)
+{
+ if (!IS_ERR(ssi_private->baudclk))
+ clk_disable_unprepare(ssi_private->baudclk);
+ clk_disable_unprepare(ssi_private->clk);
+}
+
static int fsl_ssi_probe(struct platform_device *pdev)
{
struct fsl_ssi_private *ssi_private;
@@ -1004,7 +1098,6 @@ static int fsl_ssi_probe(struct platform_device *pdev)
const uint32_t *iprop;
struct resource res;
char name[64];
- bool shared;
bool ac97 = false;
/* SSIs that are not connected on the board should have a
@@ -1118,80 +1211,11 @@ static int fsl_ssi_probe(struct platform_device *pdev)
if (hw_type == FSL_SSI_MX21 || hw_type == FSL_SSI_MX51 ||
hw_type == FSL_SSI_MX35) {
- u32 dma_events[2], dmas[4];
ssi_private->ssi_on_imx = true;
- ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(ssi_private->clk)) {
- ret = PTR_ERR(ssi_private->clk);
- dev_err(&pdev->dev, "could not get clock: %d\n", ret);
+ ret = fsl_ssi_imx_probe(pdev, ssi_private);
+ if (ret)
goto error_irqmap;
- }
- ret = clk_prepare_enable(ssi_private->clk);
- if (ret) {
- dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n",
- ret);
- goto error_irqmap;
- }
-
- /* For those SLAVE implementations, we ingore non-baudclk cases
- * and, instead, abandon MASTER mode that needs baud clock.
- */
- ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
- if (IS_ERR(ssi_private->baudclk))
- dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
- PTR_ERR(ssi_private->baudclk));
- else
- clk_prepare_enable(ssi_private->baudclk);
-
- /*
- * We have burstsize be "fifo_depth - 2" to match the SSI
- * watermark setting in fsl_ssi_startup().
- */
- ssi_private->dma_params_tx.maxburst =
- ssi_private->fifo_depth - 2;
- ssi_private->dma_params_rx.maxburst =
- ssi_private->fifo_depth - 2;
- ssi_private->dma_params_tx.addr =
- ssi_private->ssi_phys + offsetof(struct ccsr_ssi, stx0);
- ssi_private->dma_params_rx.addr =
- ssi_private->ssi_phys + offsetof(struct ccsr_ssi, srx0);
- ssi_private->dma_params_tx.filter_data =
- &ssi_private->filter_data_tx;
- ssi_private->dma_params_rx.filter_data =
- &ssi_private->filter_data_rx;
- if (!of_property_read_bool(pdev->dev.of_node, "dmas") &&
- ssi_private->use_dma) {
- /*
- * FIXME: This is a temporary solution until all
- * necessary dma drivers support the generic dma
- * bindings.
- */
- ret = of_property_read_u32_array(pdev->dev.of_node,
- "fsl,ssi-dma-events", dma_events, 2);
- if (ret && ssi_private->use_dma) {
- dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n");
- goto error_clk;
- }
- }
- /* Should this be merge with the above? */
- if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
- && dmas[2] == IMX_DMATYPE_SSI_DUAL) {
- ssi_private->use_dual_fifo = true;
- /* When using dual fifo mode, we need to keep watermark
- * as even numbers due to dma script limitation.
- */
- ssi_private->dma_params_tx.maxburst &= ~0x1;
- ssi_private->dma_params_rx.maxburst &= ~0x1;
- }
-
- shared = of_device_is_compatible(of_get_parent(np),
- "fsl,spba-bus");
-
- imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx,
- dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
- imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
- dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
}
/*
@@ -1206,7 +1230,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
if (ret < 0) {
dev_err(&pdev->dev, "could not claim irq %u\n",
ssi_private->irq);
- goto error_clk;
+ goto error_irq;
}
}
@@ -1298,11 +1322,9 @@ error_dbgfs:
error_dev:
device_remove_file(&pdev->dev, dev_attr);
-error_clk:
+error_irq:
if (ssi_private->ssi_on_imx) {
- if (!IS_ERR(ssi_private->baudclk))
- clk_disable_unprepare(ssi_private->baudclk);
- clk_disable_unprepare(ssi_private->clk);
+ fsl_ssi_imx_clean(pdev, ssi_private);
}
error_irqmap:
@@ -1321,11 +1343,10 @@ static int fsl_ssi_remove(struct platform_device *pdev)
if (!ssi_private->new_binding)
platform_device_unregister(ssi_private->pdev);
snd_soc_unregister_component(&pdev->dev);
- if (ssi_private->ssi_on_imx) {
- if (!IS_ERR(ssi_private->baudclk))
- clk_disable_unprepare(ssi_private->baudclk);
- clk_disable_unprepare(ssi_private->clk);
- }
+
+ if (ssi_private->ssi_on_imx)
+ fsl_ssi_imx_clean(pdev, ssi_private);
+
if (ssi_private->irq_stats)
irq_dispose_mapping(ssi_private->irq);
--
1.9.1
next prev parent reply other threads:[~2014-04-14 13:35 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 13:35 [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 01/18] ASoC: fsl-ssi: Fix register values when disabling Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 02/18] ASoC: fsl-ssi: Move debugging to seperate file Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 03/18] ASoC: fsl-ssi: Use dev_name for DAI driver struct Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann [this message]
2014-04-14 13:35 ` [PATCH v3 04/18] ASoC: fsl-ssi: Move imx-specific probe to seperate function Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 05/18] ASoC: fsl-ssi: Remove useless DMA code Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 06/18] ASoC: fsl-ssi: Cleanup probe function Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 07/18] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 08/18] ASoC: fsl-ssi: introduce SoC specific data Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 15:28 ` Nicolin Chen
2014-04-14 15:28 ` Nicolin Chen
2014-04-16 7:27 ` Markus Pargmann
2014-04-16 7:27 ` Markus Pargmann
2014-04-16 8:08 ` Nicolin Chen
2014-04-16 8:08 ` Nicolin Chen
2014-04-16 8:43 ` Markus Pargmann
2014-04-16 8:43 ` Markus Pargmann
2014-04-16 8:40 ` Nicolin Chen
2014-04-16 8:40 ` Nicolin Chen
2014-04-16 17:42 ` Mark Brown
2014-04-16 17:42 ` Mark Brown
2014-04-17 13:46 ` Timur Tabi
2014-04-17 13:46 ` Timur Tabi
2014-04-14 13:35 ` [PATCH v3 10/18] ASoC: fsl-ssi: make fsl,mode property optional Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 11/18] ASoC: fsl-ssi: Transmit enable synchronization Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 12/18] ASoC: fsl-ssi: Move fsl_ssi_set_dai_sysclk above fsl_ssi_hw_params Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 13/18] ASoC: fsl-ssi: set bitclock in master mode from hw_params Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 14/18] ASoC: fsl-ssi: remove unnecessary spinlock Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 15/18] ASoC: fsl-ssi: Allow first stream to set the bitclock Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 16/18] ASoC: fsl-ssi: Set framerate divider correctly for i2s master mode Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 17/18] ASoC: fsl-ssi: reorder and document fsl_ssi_private Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 18/18] ASoC: fsl-ssi: Use regmap Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann
2014-04-24 11:44 ` [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup Mark Brown
2014-04-24 11:44 ` Mark Brown
2014-04-28 8:54 ` Markus Pargmann
2014-04-28 8:54 ` Markus Pargmann
2014-04-29 16:22 ` Mark Brown
2014-04-29 16:22 ` Mark Brown
2014-04-30 2:01 ` Li.Xiubo
2014-04-30 2:01 ` Li.Xiubo at freescale.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397482548-28463-5-git-send-email-mpa@pengutronix.de \
--to=mpa@pengutronix.de \
--cc=Guangyu.Chen@freescale.com \
--cc=Li.Xiubo@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=fabio.estevam@freescale.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=shc_work@mail.ru \
--cc=timur@tabi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.