From: Vivek Gautam <gautam.vivek@samsung.com> To: linux-usb@vger.kernel.org, linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, kgene.kim@samsung.com, robh+dt@kernel.org, gregkh@linuxfoundation.org, olof@lixom.net, balbi@ti.com, jg1.han@samsung.com, t.figa@samsung.com Subject: [PATCH v5 2/9] dt: exynos5420: Enable support for DWC3 controller Date: Wed, 23 Apr 2014 20:00:44 +0530 [thread overview] Message-ID: <1398263451-18023-3-git-send-email-gautam.vivek@samsung.com> (raw) In-Reply-To: <1398263451-18023-1-git-send-email-gautam.vivek@samsung.com> Add device tree nodes for DWC3 controller present on Exynos 5420 SoC, to enable support for USB 3.0. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> --- arch/arm/boot/dts/exynos5420.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index f69745f..e808d1b 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -733,6 +733,23 @@ samsung,power-domain = <&g2d_pd>; }; + usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + usbdrd_phy0: phy@12100000 { compatible = "samsung,exynos5420-usbdrd-phy"; reg = <0x12100000 0x100>; @@ -743,6 +760,23 @@ #phy-cells = <1>; }; + usb@12400000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD301>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12400000 0x10000>; + interrupts = <0 73 0>; + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + usbdrd_phy1: phy@12500000 { compatible = "samsung,exynos5420-usbdrd-phy"; reg = <0x12500000 0x100>; -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: gautam.vivek@samsung.com (Vivek Gautam) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 2/9] dt: exynos5420: Enable support for DWC3 controller Date: Wed, 23 Apr 2014 20:00:44 +0530 [thread overview] Message-ID: <1398263451-18023-3-git-send-email-gautam.vivek@samsung.com> (raw) In-Reply-To: <1398263451-18023-1-git-send-email-gautam.vivek@samsung.com> Add device tree nodes for DWC3 controller present on Exynos 5420 SoC, to enable support for USB 3.0. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> --- arch/arm/boot/dts/exynos5420.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index f69745f..e808d1b 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -733,6 +733,23 @@ samsung,power-domain = <&g2d_pd>; }; + usb at 12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + usbdrd_phy0: phy at 12100000 { compatible = "samsung,exynos5420-usbdrd-phy"; reg = <0x12100000 0x100>; @@ -743,6 +760,23 @@ #phy-cells = <1>; }; + usb at 12400000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD301>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12400000 0x10000>; + interrupts = <0 73 0>; + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + usbdrd_phy1: phy at 12500000 { compatible = "samsung,exynos5420-usbdrd-phy"; reg = <0x12500000 0x100>; -- 1.7.10.4
next prev parent reply other threads:[~2014-04-23 14:31 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-04-23 14:30 [PATCH 0/9] Enable USB 3.0 support on Exynos5 systems Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` [PATCH v5 1/9] dt: exynos5420: Enable support for USB 3.0 PHY controller Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-25 6:27 ` Tushar Behera 2014-04-25 6:27 ` Tushar Behera 2014-04-23 14:30 ` Vivek Gautam [this message] 2014-04-23 14:30 ` [PATCH v5 2/9] dt: exynos5420: Enable support for DWC3 controller Vivek Gautam 2014-04-23 14:30 ` [PATCH v5 3/9] dt: exynos5250: Enable support for generic USB DRD phy Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-25 6:31 ` Tushar Behera 2014-04-25 6:31 ` Tushar Behera 2014-04-23 14:30 ` [PATCH v5 4/9] dts: exynos5250: Update DWC3 usb controller to use new phy driver Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` [PATCH v5 5/9] dts: exynos5250-snow: Add Vbus regulator for USB 3.0 Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` [PATCH v5 6/9] dts: exynos5420-peach-pit: " Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` [PATCH v5 7/9] dts: exynos5420-smdk5420: " Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` [PATCH v5 8/9] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam 2014-04-23 14:30 ` [PATCH v5 9/9] ARM: exynos_defconfig: Remove SAMSUNG_USB3PHY config Vivek Gautam 2014-04-23 14:30 ` Vivek Gautam
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1398263451-18023-3-git-send-email-gautam.vivek@samsung.com \ --to=gautam.vivek@samsung.com \ --cc=balbi@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=jg1.han@samsung.com \ --cc=kgene.kim@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=t.figa@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.