From: "Ivan T. Ivanov" <iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
To: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Cc: "Ivan T. Ivanov"
<iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>,
Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v8 03/20] usb: phy: msm: Move global regulators variables to driver state
Date: Mon, 28 Apr 2014 16:34:06 +0300 [thread overview]
Message-ID: <1398692063-11372-4-git-send-email-iivanov@mm-sol.com> (raw)
In-Reply-To: <1398692063-11372-1-git-send-email-iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
From: "Ivan T. Ivanov" <iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
Eliminating global variables allows driver to handle multiple
device instances.
Signed-off-by: Ivan T. Ivanov <iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
---
drivers/usb/phy/phy-msm-usb.c | 82 ++++++++++++++++++++-----------------------
include/linux/usb/msm_hsusb.h | 3 ++
2 files changed, 42 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 6ae4d2f..6bae936 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -58,47 +58,43 @@
#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */
#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */
-static struct regulator *hsusb_3p3;
-static struct regulator *hsusb_1p8;
-static struct regulator *hsusb_vddcx;
-
static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
{
int ret = 0;
if (init) {
- hsusb_vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX");
- if (IS_ERR(hsusb_vddcx)) {
+ motg->vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX");
+ if (IS_ERR(motg->vddcx)) {
dev_err(motg->phy.dev, "unable to get hsusb vddcx\n");
- return PTR_ERR(hsusb_vddcx);
+ return PTR_ERR(motg->vddcx);
}
- ret = regulator_set_voltage(hsusb_vddcx,
+ ret = regulator_set_voltage(motg->vddcx,
USB_PHY_VDD_DIG_VOL_MIN,
USB_PHY_VDD_DIG_VOL_MAX);
if (ret) {
dev_err(motg->phy.dev, "unable to set the voltage "
"for hsusb vddcx\n");
- regulator_put(hsusb_vddcx);
+ regulator_put(motg->vddcx);
return ret;
}
- ret = regulator_enable(hsusb_vddcx);
+ ret = regulator_enable(motg->vddcx);
if (ret) {
dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
- regulator_put(hsusb_vddcx);
+ regulator_put(motg->vddcx);
}
} else {
- ret = regulator_set_voltage(hsusb_vddcx, 0,
+ ret = regulator_set_voltage(motg->vddcx, 0,
USB_PHY_VDD_DIG_VOL_MAX);
if (ret)
dev_err(motg->phy.dev, "unable to set the voltage "
"for hsusb vddcx\n");
- ret = regulator_disable(hsusb_vddcx);
+ ret = regulator_disable(motg->vddcx);
if (ret)
dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
- regulator_put(hsusb_vddcx);
+ regulator_put(motg->vddcx);
}
return ret;
@@ -109,38 +105,38 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
int rc = 0;
if (init) {
- hsusb_3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3");
- if (IS_ERR(hsusb_3p3)) {
+ motg->v3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3");
+ if (IS_ERR(motg->v3p3)) {
dev_err(motg->phy.dev, "unable to get hsusb 3p3\n");
- return PTR_ERR(hsusb_3p3);
+ return PTR_ERR(motg->v3p3);
}
- rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN,
+ rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
USB_PHY_3P3_VOL_MAX);
if (rc) {
dev_err(motg->phy.dev, "unable to set voltage level "
"for hsusb 3p3\n");
goto put_3p3;
}
- rc = regulator_enable(hsusb_3p3);
+ rc = regulator_enable(motg->v3p3);
if (rc) {
dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
goto put_3p3;
}
- hsusb_1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8");
- if (IS_ERR(hsusb_1p8)) {
+ motg->v1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8");
+ if (IS_ERR(motg->v1p8)) {
dev_err(motg->phy.dev, "unable to get hsusb 1p8\n");
- rc = PTR_ERR(hsusb_1p8);
+ rc = PTR_ERR(motg->v1p8);
goto disable_3p3;
}
- rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN,
+ rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
USB_PHY_1P8_VOL_MAX);
if (rc) {
dev_err(motg->phy.dev, "unable to set voltage level "
"for hsusb 1p8\n");
goto put_1p8;
}
- rc = regulator_enable(hsusb_1p8);
+ rc = regulator_enable(motg->v1p8);
if (rc) {
dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
goto put_1p8;
@@ -149,54 +145,54 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
return 0;
}
- regulator_disable(hsusb_1p8);
+ regulator_disable(motg->v1p8);
put_1p8:
- regulator_put(hsusb_1p8);
+ regulator_put(motg->v1p8);
disable_3p3:
- regulator_disable(hsusb_3p3);
+ regulator_disable(motg->v3p3);
put_3p3:
- regulator_put(hsusb_3p3);
+ regulator_put(motg->v3p3);
return rc;
}
-static int msm_hsusb_ldo_set_mode(int on)
+static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
{
int ret = 0;
- if (!hsusb_1p8 || IS_ERR(hsusb_1p8)) {
+ if (!motg->v1p8 || IS_ERR(motg->v1p8)) {
pr_err("%s: HSUSB_1p8 is not initialized\n", __func__);
return -ENODEV;
}
- if (!hsusb_3p3 || IS_ERR(hsusb_3p3)) {
+ if (!motg->v3p3 || IS_ERR(motg->v3p3)) {
pr_err("%s: HSUSB_3p3 is not initialized\n", __func__);
return -ENODEV;
}
if (on) {
- ret = regulator_set_optimum_mode(hsusb_1p8,
+ ret = regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_HPM_LOAD);
if (ret < 0) {
pr_err("%s: Unable to set HPM of the regulator "
"HSUSB_1p8\n", __func__);
return ret;
}
- ret = regulator_set_optimum_mode(hsusb_3p3,
+ ret = regulator_set_optimum_mode(motg->v3p3,
USB_PHY_3P3_HPM_LOAD);
if (ret < 0) {
pr_err("%s: Unable to set HPM of the regulator "
"HSUSB_3p3\n", __func__);
- regulator_set_optimum_mode(hsusb_1p8,
+ regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_LPM_LOAD);
return ret;
}
} else {
- ret = regulator_set_optimum_mode(hsusb_1p8,
+ ret = regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_LPM_LOAD);
if (ret < 0)
pr_err("%s: Unable to set LPM of the regulator "
"HSUSB_1p8\n", __func__);
- ret = regulator_set_optimum_mode(hsusb_3p3,
+ ret = regulator_set_optimum_mode(motg->v3p3,
USB_PHY_3P3_LPM_LOAD);
if (ret < 0)
pr_err("%s: Unable to set LPM of the regulator "
@@ -417,7 +413,7 @@ static int msm_otg_reset(struct usb_phy *phy)
#ifdef CONFIG_PM
#define USB_PHY_SUSP_DIG_VOL 500000
-static int msm_hsusb_config_vddcx(int high)
+static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high)
{
int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
int min_vol;
@@ -428,7 +424,7 @@ static int msm_hsusb_config_vddcx(int high)
else
min_vol = USB_PHY_SUSP_DIG_VOL;
- ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
+ ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol);
if (ret) {
pr_err("%s: unable to set the voltage for regulator "
"HSUSB_VDDCX\n", __func__);
@@ -518,8 +514,8 @@ static int msm_otg_suspend(struct msm_otg *motg)
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
- msm_hsusb_ldo_set_mode(0);
- msm_hsusb_config_vddcx(0);
+ msm_hsusb_ldo_set_mode(motg, 0);
+ msm_hsusb_config_vddcx(motg, 0);
}
if (device_may_wakeup(phy->dev))
@@ -555,8 +551,8 @@ static int msm_otg_resume(struct msm_otg *motg)
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
- msm_hsusb_ldo_set_mode(1);
- msm_hsusb_config_vddcx(1);
+ msm_hsusb_ldo_set_mode(motg, 1);
+ msm_hsusb_config_vddcx(motg, 1);
writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL);
}
@@ -1521,7 +1517,7 @@ static int msm_otg_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
goto vddcx_exit;
}
- ret = msm_hsusb_ldo_set_mode(1);
+ ret = msm_hsusb_ldo_set_mode(motg, 1);
if (ret) {
dev_err(&pdev->dev, "hsusb vreg enable failed\n");
goto ldo_exit;
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 3275483..8705b01 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -183,6 +183,9 @@ struct msm_otg {
enum usb_chg_state chg_state;
enum usb_chg_type chg_type;
u8 dcd_retries;
+ struct regulator *v3p3;
+ struct regulator *v1p8;
+ struct regulator *vddcx;
};
#endif
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: Felipe Balbi <balbi@ti.com>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Subject: [PATCH v8 03/20] usb: phy: msm: Move global regulators variables to driver state
Date: Mon, 28 Apr 2014 16:34:06 +0300 [thread overview]
Message-ID: <1398692063-11372-4-git-send-email-iivanov@mm-sol.com> (raw)
In-Reply-To: <1398692063-11372-1-git-send-email-iivanov@mm-sol.com>
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Eliminating global variables allows driver to handle multiple
device instances.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
drivers/usb/phy/phy-msm-usb.c | 82 ++++++++++++++++++++-----------------------
include/linux/usb/msm_hsusb.h | 3 ++
2 files changed, 42 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 6ae4d2f..6bae936 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -58,47 +58,43 @@
#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */
#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */
-static struct regulator *hsusb_3p3;
-static struct regulator *hsusb_1p8;
-static struct regulator *hsusb_vddcx;
-
static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
{
int ret = 0;
if (init) {
- hsusb_vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX");
- if (IS_ERR(hsusb_vddcx)) {
+ motg->vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX");
+ if (IS_ERR(motg->vddcx)) {
dev_err(motg->phy.dev, "unable to get hsusb vddcx\n");
- return PTR_ERR(hsusb_vddcx);
+ return PTR_ERR(motg->vddcx);
}
- ret = regulator_set_voltage(hsusb_vddcx,
+ ret = regulator_set_voltage(motg->vddcx,
USB_PHY_VDD_DIG_VOL_MIN,
USB_PHY_VDD_DIG_VOL_MAX);
if (ret) {
dev_err(motg->phy.dev, "unable to set the voltage "
"for hsusb vddcx\n");
- regulator_put(hsusb_vddcx);
+ regulator_put(motg->vddcx);
return ret;
}
- ret = regulator_enable(hsusb_vddcx);
+ ret = regulator_enable(motg->vddcx);
if (ret) {
dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
- regulator_put(hsusb_vddcx);
+ regulator_put(motg->vddcx);
}
} else {
- ret = regulator_set_voltage(hsusb_vddcx, 0,
+ ret = regulator_set_voltage(motg->vddcx, 0,
USB_PHY_VDD_DIG_VOL_MAX);
if (ret)
dev_err(motg->phy.dev, "unable to set the voltage "
"for hsusb vddcx\n");
- ret = regulator_disable(hsusb_vddcx);
+ ret = regulator_disable(motg->vddcx);
if (ret)
dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
- regulator_put(hsusb_vddcx);
+ regulator_put(motg->vddcx);
}
return ret;
@@ -109,38 +105,38 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
int rc = 0;
if (init) {
- hsusb_3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3");
- if (IS_ERR(hsusb_3p3)) {
+ motg->v3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3");
+ if (IS_ERR(motg->v3p3)) {
dev_err(motg->phy.dev, "unable to get hsusb 3p3\n");
- return PTR_ERR(hsusb_3p3);
+ return PTR_ERR(motg->v3p3);
}
- rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN,
+ rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
USB_PHY_3P3_VOL_MAX);
if (rc) {
dev_err(motg->phy.dev, "unable to set voltage level "
"for hsusb 3p3\n");
goto put_3p3;
}
- rc = regulator_enable(hsusb_3p3);
+ rc = regulator_enable(motg->v3p3);
if (rc) {
dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
goto put_3p3;
}
- hsusb_1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8");
- if (IS_ERR(hsusb_1p8)) {
+ motg->v1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8");
+ if (IS_ERR(motg->v1p8)) {
dev_err(motg->phy.dev, "unable to get hsusb 1p8\n");
- rc = PTR_ERR(hsusb_1p8);
+ rc = PTR_ERR(motg->v1p8);
goto disable_3p3;
}
- rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN,
+ rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
USB_PHY_1P8_VOL_MAX);
if (rc) {
dev_err(motg->phy.dev, "unable to set voltage level "
"for hsusb 1p8\n");
goto put_1p8;
}
- rc = regulator_enable(hsusb_1p8);
+ rc = regulator_enable(motg->v1p8);
if (rc) {
dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
goto put_1p8;
@@ -149,54 +145,54 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
return 0;
}
- regulator_disable(hsusb_1p8);
+ regulator_disable(motg->v1p8);
put_1p8:
- regulator_put(hsusb_1p8);
+ regulator_put(motg->v1p8);
disable_3p3:
- regulator_disable(hsusb_3p3);
+ regulator_disable(motg->v3p3);
put_3p3:
- regulator_put(hsusb_3p3);
+ regulator_put(motg->v3p3);
return rc;
}
-static int msm_hsusb_ldo_set_mode(int on)
+static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
{
int ret = 0;
- if (!hsusb_1p8 || IS_ERR(hsusb_1p8)) {
+ if (!motg->v1p8 || IS_ERR(motg->v1p8)) {
pr_err("%s: HSUSB_1p8 is not initialized\n", __func__);
return -ENODEV;
}
- if (!hsusb_3p3 || IS_ERR(hsusb_3p3)) {
+ if (!motg->v3p3 || IS_ERR(motg->v3p3)) {
pr_err("%s: HSUSB_3p3 is not initialized\n", __func__);
return -ENODEV;
}
if (on) {
- ret = regulator_set_optimum_mode(hsusb_1p8,
+ ret = regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_HPM_LOAD);
if (ret < 0) {
pr_err("%s: Unable to set HPM of the regulator "
"HSUSB_1p8\n", __func__);
return ret;
}
- ret = regulator_set_optimum_mode(hsusb_3p3,
+ ret = regulator_set_optimum_mode(motg->v3p3,
USB_PHY_3P3_HPM_LOAD);
if (ret < 0) {
pr_err("%s: Unable to set HPM of the regulator "
"HSUSB_3p3\n", __func__);
- regulator_set_optimum_mode(hsusb_1p8,
+ regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_LPM_LOAD);
return ret;
}
} else {
- ret = regulator_set_optimum_mode(hsusb_1p8,
+ ret = regulator_set_optimum_mode(motg->v1p8,
USB_PHY_1P8_LPM_LOAD);
if (ret < 0)
pr_err("%s: Unable to set LPM of the regulator "
"HSUSB_1p8\n", __func__);
- ret = regulator_set_optimum_mode(hsusb_3p3,
+ ret = regulator_set_optimum_mode(motg->v3p3,
USB_PHY_3P3_LPM_LOAD);
if (ret < 0)
pr_err("%s: Unable to set LPM of the regulator "
@@ -417,7 +413,7 @@ static int msm_otg_reset(struct usb_phy *phy)
#ifdef CONFIG_PM
#define USB_PHY_SUSP_DIG_VOL 500000
-static int msm_hsusb_config_vddcx(int high)
+static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high)
{
int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
int min_vol;
@@ -428,7 +424,7 @@ static int msm_hsusb_config_vddcx(int high)
else
min_vol = USB_PHY_SUSP_DIG_VOL;
- ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
+ ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol);
if (ret) {
pr_err("%s: unable to set the voltage for regulator "
"HSUSB_VDDCX\n", __func__);
@@ -518,8 +514,8 @@ static int msm_otg_suspend(struct msm_otg *motg)
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
- msm_hsusb_ldo_set_mode(0);
- msm_hsusb_config_vddcx(0);
+ msm_hsusb_ldo_set_mode(motg, 0);
+ msm_hsusb_config_vddcx(motg, 0);
}
if (device_may_wakeup(phy->dev))
@@ -555,8 +551,8 @@ static int msm_otg_resume(struct msm_otg *motg)
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
- msm_hsusb_ldo_set_mode(1);
- msm_hsusb_config_vddcx(1);
+ msm_hsusb_ldo_set_mode(motg, 1);
+ msm_hsusb_config_vddcx(motg, 1);
writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL);
}
@@ -1521,7 +1517,7 @@ static int msm_otg_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
goto vddcx_exit;
}
- ret = msm_hsusb_ldo_set_mode(1);
+ ret = msm_hsusb_ldo_set_mode(motg, 1);
if (ret) {
dev_err(&pdev->dev, "hsusb vreg enable failed\n");
goto ldo_exit;
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 3275483..8705b01 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -183,6 +183,9 @@ struct msm_otg {
enum usb_chg_state chg_state;
enum usb_chg_type chg_type;
u8 dcd_retries;
+ struct regulator *v3p3;
+ struct regulator *v1p8;
+ struct regulator *vddcx;
};
#endif
--
1.8.3.2
next prev parent reply other threads:[~2014-04-28 13:34 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-28 13:34 [PATCH v8 00/20] usb: phy: msm: Fixes, cleanups and DT support Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 01/20] usb: phy: msm: Make driver selectable on ARCH_QCOM Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 02/20] usb: phy: msm: Remove __init macro from driver probe method Ivan T. Ivanov
[not found] ` <535E893B.7050609@cogentembedded.com>
[not found] ` <20140428170357.GP30292@saruman.home>
2014-04-28 17:52 ` Ivan T. Ivanov
2014-04-28 17:54 ` Felipe Balbi
2014-04-28 17:54 ` Felipe Balbi
2014-04-28 17:57 ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 04/20] usb: phy: msm: Enable deferred driver probing Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 05/20] usb: phy: msm: Migrate to Managed Device Resource allocation Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 06/20] usb: phy: msm: Remove unnecessarily check for valid regulators Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 07/20] usb: phy: msm: Fix checkpatch.pl warnings Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 08/20] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 09/20] usb: phy: msm: Remove unused pclk_src_name Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 10/20] usb: phy: msm: Remove HSUSB prefix from regulator names Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 11/20] usb: phy: msm: Properly check result from platform_get_irq() Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 13/20] usb: phy: msm: Use reset framework for LINK and PHY resets Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 14/20] usb: phy: msm: Add support for secondary PHY control Ivan T. Ivanov
2014-04-30 16:22 ` Felipe Balbi
2014-04-30 16:22 ` Felipe Balbi
2014-04-28 13:34 ` [PATCH v8 15/20] usb: phy: msm: Correct USB PHY Reset sequence for newer platform Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 16/20] usb: phy: msm: Fix PTS definitions for MSM USB controller Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 17/20] usb: phy: msm: Select secondary PHY via TCSR Ivan T. Ivanov
2014-04-30 16:23 ` Felipe Balbi
2014-04-30 16:23 ` Felipe Balbi
2014-05-03 6:45 ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 18/20] usb: phy: msm: Handle disconnect events Ivan T. Ivanov
[not found] ` <1398692063-11372-1-git-send-email-iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
2014-04-28 13:34 ` Ivan T. Ivanov [this message]
2014-04-28 13:34 ` [PATCH v8 03/20] usb: phy: msm: Move global regulators variables to driver state Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 12/20] usb: phy: msm: Add device tree support and binding information Ivan T. Ivanov
2014-04-28 13:34 ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 19/20] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX Ivan T. Ivanov
2014-04-28 13:34 ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 20/20] usb: phy: msm: Use usb_add_phy_dev() to register device Ivan T. Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398692063-11372-4-git-send-email-iivanov@mm-sol.com \
--to=iivanov-neyub+7iv8pqt0dzr+alfa@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.