From: Dan Murphy <dmurphy@ti.com> To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, tony@atomide.com, devicetree@vger.kernel.org Cc: t-kristo@ti.com, s-anna@ti.com, p.zabel@pengutronix.de, Dan Murphy <dmurphy@ti.com> Subject: [RFC 05/11] drivers: reset: am43xx: Add reset data for am43xx Date: Tue, 29 Apr 2014 15:19:44 -0500 [thread overview] Message-ID: <1398802790-29287-6-git-send-email-dmurphy@ti.com> (raw) In-Reply-To: <1398802790-29287-1-git-send-email-dmurphy@ti.com> Add the reset register data for the am43xx SoC. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/reset/ti/Makefile | 1 + drivers/reset/ti/reset-ti-am43xx.c | 43 ++++++++++++++++++++++++++++++++++++ drivers/reset/ti/reset-ti-data.h | 1 + 3 files changed, 45 insertions(+) create mode 100644 drivers/reset/ti/reset-ti-am43xx.c diff --git a/drivers/reset/ti/Makefile b/drivers/reset/ti/Makefile index f0dbd01..3d362c2 100644 --- a/drivers/reset/ti/Makefile +++ b/drivers/reset/ti/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_RESET_TI) += reset-ti.o obj-$(CONFIG_SOC_DRA7XX) += reset-ti-dra7xx.o obj-$(CONFIG_SOC_OMAP5) += reset-ti-omap5.o obj-$(CONFIG_SOC_AM33XX) += reset-ti-am33xx.o +obj-$(CONFIG_SOC_AM43XX) += reset-ti-am43xx.o diff --git a/drivers/reset/ti/reset-ti-am43xx.c b/drivers/reset/ti/reset-ti-am43xx.c new file mode 100644 index 0000000..cfb283b --- /dev/null +++ b/drivers/reset/ti/reset-ti-am43xx.c @@ -0,0 +1,43 @@ +/* + * am43xx reset data for PRCM Module + * + * Copyright 2014 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "reset-ti-data.h" + +static struct ti_reset_reg_data am43x_reset_reg_data[] = { + { + .rstctrl_offs = 0x4000, + .rstctrl_bit = 0, + .rstst_offs = 0x4004, + .rstst_bit = 0, + }, + { + .rstctrl_offs = 0x810, + .rstctrl_bit = 1, + .rstst_offs = 0x814, + .rstst_bit = 0, + }, + { + .rstctrl_offs = 0x410, + .rstst_offs = 0x414, + .rstctrl_bit = 0, + .rstst_bit = 0, + }, + { + .rstctrl_offs = 0x2010, + .rstst_offs = 0x2014, + .rstctrl_bit = 3, + .rstst_bit = 5, + }, +}; + +struct ti_reset_data am43x_reset_data = { + .reg_data = am43x_reset_reg_data, + .nr_resets = ARRAY_SIZE(am43x_reset_reg_data), +}; diff --git a/drivers/reset/ti/reset-ti-data.h b/drivers/reset/ti/reset-ti-data.h index 48a1476..f56f1a5 100644 --- a/drivers/reset/ti/reset-ti-data.h +++ b/drivers/reset/ti/reset-ti-data.h @@ -58,5 +58,6 @@ struct ti_reset_data { extern struct ti_reset_data dra7_reset_data; extern struct ti_reset_data omap5_reset_data; extern struct ti_reset_data am335x_reset_data; +extern struct ti_reset_data am43x_reset_data; #endif -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: dmurphy@ti.com (Dan Murphy) To: linux-arm-kernel@lists.infradead.org Subject: [RFC 05/11] drivers: reset: am43xx: Add reset data for am43xx Date: Tue, 29 Apr 2014 15:19:44 -0500 [thread overview] Message-ID: <1398802790-29287-6-git-send-email-dmurphy@ti.com> (raw) In-Reply-To: <1398802790-29287-1-git-send-email-dmurphy@ti.com> Add the reset register data for the am43xx SoC. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/reset/ti/Makefile | 1 + drivers/reset/ti/reset-ti-am43xx.c | 43 ++++++++++++++++++++++++++++++++++++ drivers/reset/ti/reset-ti-data.h | 1 + 3 files changed, 45 insertions(+) create mode 100644 drivers/reset/ti/reset-ti-am43xx.c diff --git a/drivers/reset/ti/Makefile b/drivers/reset/ti/Makefile index f0dbd01..3d362c2 100644 --- a/drivers/reset/ti/Makefile +++ b/drivers/reset/ti/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_RESET_TI) += reset-ti.o obj-$(CONFIG_SOC_DRA7XX) += reset-ti-dra7xx.o obj-$(CONFIG_SOC_OMAP5) += reset-ti-omap5.o obj-$(CONFIG_SOC_AM33XX) += reset-ti-am33xx.o +obj-$(CONFIG_SOC_AM43XX) += reset-ti-am43xx.o diff --git a/drivers/reset/ti/reset-ti-am43xx.c b/drivers/reset/ti/reset-ti-am43xx.c new file mode 100644 index 0000000..cfb283b --- /dev/null +++ b/drivers/reset/ti/reset-ti-am43xx.c @@ -0,0 +1,43 @@ +/* + * am43xx reset data for PRCM Module + * + * Copyright 2014 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "reset-ti-data.h" + +static struct ti_reset_reg_data am43x_reset_reg_data[] = { + { + .rstctrl_offs = 0x4000, + .rstctrl_bit = 0, + .rstst_offs = 0x4004, + .rstst_bit = 0, + }, + { + .rstctrl_offs = 0x810, + .rstctrl_bit = 1, + .rstst_offs = 0x814, + .rstst_bit = 0, + }, + { + .rstctrl_offs = 0x410, + .rstst_offs = 0x414, + .rstctrl_bit = 0, + .rstst_bit = 0, + }, + { + .rstctrl_offs = 0x2010, + .rstst_offs = 0x2014, + .rstctrl_bit = 3, + .rstst_bit = 5, + }, +}; + +struct ti_reset_data am43x_reset_data = { + .reg_data = am43x_reset_reg_data, + .nr_resets = ARRAY_SIZE(am43x_reset_reg_data), +}; diff --git a/drivers/reset/ti/reset-ti-data.h b/drivers/reset/ti/reset-ti-data.h index 48a1476..f56f1a5 100644 --- a/drivers/reset/ti/reset-ti-data.h +++ b/drivers/reset/ti/reset-ti-data.h @@ -58,5 +58,6 @@ struct ti_reset_data { extern struct ti_reset_data dra7_reset_data; extern struct ti_reset_data omap5_reset_data; extern struct ti_reset_data am335x_reset_data; +extern struct ti_reset_data am43x_reset_data; #endif -- 1.7.9.5
next prev parent reply other threads:[~2014-04-29 20:19 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-04-29 20:19 [RFC] TI Reset Driver adapted to the reset core Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:19 ` [RFC 01/11] drivers: reset: TI: SoC reset controller support Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:36 ` Arnd Bergmann 2014-04-29 20:36 ` Arnd Bergmann 2014-04-30 8:20 ` Philipp Zabel 2014-04-30 8:20 ` Philipp Zabel 2014-04-30 17:50 ` Dan Murphy 2014-04-30 17:50 ` Dan Murphy 2014-04-29 20:19 ` [RFC 02/11] drivers: reset: dra7: Add reset data for dra7xx Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:19 ` [RFC 03/11] drivers: reset: omap5: Add reset data for omap5 Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:19 ` [RFC 04/11] drivers: reset: am335: Add reset data for am335 Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:19 ` Dan Murphy [this message] 2014-04-29 20:19 ` [RFC 05/11] drivers: reset: am43xx: Add reset data for am43xx Dan Murphy 2014-04-29 20:19 ` [RFC 06/11] ARM: OMAP: Add reset init to prcm file Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:19 ` [RFC 07/11] ARM: TI: Describe the ti reset DT entries Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:19 ` [RFC 08/11] ARM: dts: am33xx: Add prcm_resets node Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:34 ` Arnd Bergmann 2014-04-29 20:34 ` Arnd Bergmann 2014-04-30 0:22 ` Tony Lindgren 2014-04-30 0:22 ` Tony Lindgren 2014-04-30 18:00 ` Dan Murphy 2014-04-30 18:00 ` Dan Murphy 2014-04-30 18:10 ` Tony Lindgren 2014-04-30 18:10 ` Tony Lindgren 2014-04-30 18:13 ` Dan Murphy 2014-04-30 18:13 ` Dan Murphy 2014-04-30 22:33 ` Tony Lindgren 2014-04-30 22:33 ` Tony Lindgren 2014-05-01 18:46 ` Dan Murphy 2014-05-01 18:46 ` Dan Murphy 2014-04-29 20:19 ` [RFC 09/11] ARM: dts: am4372: " Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:19 ` [RFC 10/11] ARM: dts: dra7: Add prm_resets node Dan Murphy 2014-04-29 20:19 ` Dan Murphy 2014-04-29 20:19 ` [RFC 11/11] ARM: dts: omap5: " Dan Murphy 2014-04-29 20:19 ` Dan Murphy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1398802790-29287-6-git-send-email-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=p.zabel@pengutronix.de \ --cc=s-anna@ti.com \ --cc=t-kristo@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.