From: Georgi Djakov <gdjakov@mm-sol.com>
To: linux@arm.linux.org.uk, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, sboyd@codeaurora.org,
rvaswani@codeaurora.org, davidb@codeaurora.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Georgi Djakov <gdjakov@mm-sol.com>
Subject: [PATCH v2 2/4] ARM: dts: qcom: Add APQ8084-MTP board support
Date: Fri, 23 May 2014 18:12:30 +0300 [thread overview]
Message-ID: <1400857952-6963-3-git-send-email-gdjakov@mm-sol.com> (raw)
In-Reply-To: <1400857952-6963-1-git-send-email-gdjakov@mm-sol.com>
Add device-tree file for APQ8084-MTP board, which belongs
to the Snapdragon 805 family.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/qcom-apq8084-mtp.dts | 6 ++++++
2 files changed, 8 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-apq8084-mtp.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 377b7c3..792f063 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -293,7 +293,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
- qcom-apq8074-dragonboard.dtb
+ qcom-apq8074-dragonboard.dtb \
+ qcom-apq8084-mtp.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
new file mode 100644
index 0000000..9dae387
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -0,0 +1,6 @@
+#include "qcom-apq8084.dtsi"
+
+/ {
+ model = "Qualcomm APQ 8084-MTP";
+ compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: gdjakov@mm-sol.com (Georgi Djakov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/4] ARM: dts: qcom: Add APQ8084-MTP board support
Date: Fri, 23 May 2014 18:12:30 +0300 [thread overview]
Message-ID: <1400857952-6963-3-git-send-email-gdjakov@mm-sol.com> (raw)
In-Reply-To: <1400857952-6963-1-git-send-email-gdjakov@mm-sol.com>
Add device-tree file for APQ8084-MTP board, which belongs
to the Snapdragon 805 family.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
---
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/qcom-apq8084-mtp.dts | 6 ++++++
2 files changed, 8 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-apq8084-mtp.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 377b7c3..792f063 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -293,7 +293,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
- qcom-apq8074-dragonboard.dtb
+ qcom-apq8074-dragonboard.dtb \
+ qcom-apq8084-mtp.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
new file mode 100644
index 0000000..9dae387
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -0,0 +1,6 @@
+#include "qcom-apq8084.dtsi"
+
+/ {
+ model = "Qualcomm APQ 8084-MTP";
+ compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+};
--
1.7.9.5
next prev parent reply other threads:[~2014-05-23 15:12 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 15:12 [PATCH v2 0/4] Add Qualcomm APQ8084 SoC support Georgi Djakov
2014-05-23 15:12 ` Georgi Djakov
2014-05-23 15:12 ` [PATCH v2 1/4] ARM: dts: qcom: Add " Georgi Djakov
2014-05-23 15:12 ` Georgi Djakov
2014-05-23 15:12 ` Georgi Djakov [this message]
2014-05-23 15:12 ` [PATCH v2 2/4] ARM: dts: qcom: Add APQ8084-MTP board support Georgi Djakov
2014-05-23 15:12 ` [PATCH v2 3/4] ARM: qcom: Add APQ8084 to mach-qcom Georgi Djakov
2014-05-23 15:12 ` Georgi Djakov
2014-05-23 15:12 ` [PATCH v2 4/4] ARM: debug: qcom: add UART addresses to Kconfig help Georgi Djakov
2014-05-23 15:12 ` Georgi Djakov
2014-05-23 16:39 ` Matthias Brugger
2014-05-23 16:39 ` Matthias Brugger
2014-05-23 16:39 ` Matthias Brugger
2014-05-26 13:45 ` Georgi Djakov
2014-05-26 13:45 ` Georgi Djakov
2014-05-26 13:45 ` Georgi Djakov
[not found] ` <53834578.9090305-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
2014-05-26 17:17 ` Matthias Brugger
2014-05-26 17:17 ` Matthias Brugger
2014-05-26 17:17 ` Matthias Brugger
2014-05-27 12:05 ` Georgi Djakov
2014-05-27 12:05 ` Georgi Djakov
2014-05-27 12:05 ` Georgi Djakov
2014-05-29 15:26 ` Matthias Brugger
2014-05-29 15:26 ` Matthias Brugger
2014-05-29 15:26 ` Matthias Brugger
[not found] ` <CABuKBeLHOKK+DsVPBGPDmeSqceSTMGZeOd74-Jp4Z9vUWDZ_yQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-30 7:50 ` Ivan T. Ivanov
2014-05-30 7:50 ` Ivan T. Ivanov
2014-05-30 7:50 ` Ivan T. Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400857952-6963-3-git-send-email-gdjakov@mm-sol.com \
--to=gdjakov@mm-sol.com \
--cc=davidb@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rvaswani@codeaurora.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.