All of lore.kernel.org
 help / color / mirror / Atom feed
From: Doug Anderson <dianders@chromium.org>
To: Heiko Stuebner <heiko@sntech.de>,
	Seungwon Jeon <tgih.jun@samsung.com>,
	Jaehoon Chung <jh80.chung@samsung.com>,
	Chris Ball <chris@printf.net>,
	Ulf Hansson <ulf.hansson@linaro.org>
Cc: Addy Ke <addy.ke@rock-chips.com>,
	Kever Yang <kever.yang@rock-chips.com>,
	Sonny Rao <sonnyrao@chromium.org>,
	linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org,
	Arnd Bergmann <arnd@arndb.de>,
	Doug Anderson <dianders@chromium.org>,
	mark.rutland@arm.com, devicetree@vger.kernel.org,
	linux@arm.linux.org.uk, pawel.moll@arm.com,
	ijc+devicetree@hellion.org.uk, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, galak@codeaurora.org
Subject: [PATCH v3 0/4] Add eMMC and SD card support for rk3288-evb
Date: Wed,  6 Aug 2014 10:09:40 -0700	[thread overview]
Message-ID: <1407344984-14176-1-git-send-email-dianders@chromium.org> (raw)

This series adds basic eMMC and SD card support for the rk3288-evb
board based on Addy's posted dw_mmc patch from:
  https://patchwork.kernel.org/patch/4653631/

The series is a little tricky because:
* Jaehoon has some outstanding patches to remove the slot node.  Since
  those haven't landed yet, I've posted my original patch with the
  slot node and then some future patches that can land with Jaehoon's
  patches.

So just to be explicit:
- Patch #1 and #2 can land after Addy's patch lands.
- Patch #3 and #4 can land after Jaehoon's patch lands, though there's
  no huge hurry since Jaehoon's patch supports the old mode (it just
  prints a warning).

Note that we don't have regulators specified yet (no regulator driver
for rk808-based board).  We also don't yet support UHS modes or MMC
DDR50 (which require regulator support plus dw_mmc driver support for
tuning).  Those features can come later.

Changes in v3:
- Removed DDR50 mode since it needs tuning, which isn't there yet.

Changes in v2:
- New patchwork link for Addy's patch
- Squashed in the DDR50 mode since Addy spun his patch.
- Refer to the new title of Jaehoon's patch

Doug Anderson (4):
  ARM: dts: Add emmc and sdmmc to the rk3288 device tree
  ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards
  ARM: dts: Take the mmc slot node out of rk3288-evb
  ARM: dts: mmc slot node gone on rk3288 => no more address / size cells

 arch/arm/boot/dts/rk3288-evb.dtsi | 24 ++++++++++++++++++++++++
 arch/arm/boot/dts/rk3288.dtsi     | 18 ++++++++++++++++++
 2 files changed, 42 insertions(+)

-- 
2.0.0.526.g5318336


WARNING: multiple messages have this Message-ID (diff)
From: dianders@chromium.org (Doug Anderson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] Add eMMC and SD card support for rk3288-evb
Date: Wed,  6 Aug 2014 10:09:40 -0700	[thread overview]
Message-ID: <1407344984-14176-1-git-send-email-dianders@chromium.org> (raw)

This series adds basic eMMC and SD card support for the rk3288-evb
board based on Addy's posted dw_mmc patch from:
  https://patchwork.kernel.org/patch/4653631/

The series is a little tricky because:
* Jaehoon has some outstanding patches to remove the slot node.  Since
  those haven't landed yet, I've posted my original patch with the
  slot node and then some future patches that can land with Jaehoon's
  patches.

So just to be explicit:
- Patch #1 and #2 can land after Addy's patch lands.
- Patch #3 and #4 can land after Jaehoon's patch lands, though there's
  no huge hurry since Jaehoon's patch supports the old mode (it just
  prints a warning).

Note that we don't have regulators specified yet (no regulator driver
for rk808-based board).  We also don't yet support UHS modes or MMC
DDR50 (which require regulator support plus dw_mmc driver support for
tuning).  Those features can come later.

Changes in v3:
- Removed DDR50 mode since it needs tuning, which isn't there yet.

Changes in v2:
- New patchwork link for Addy's patch
- Squashed in the DDR50 mode since Addy spun his patch.
- Refer to the new title of Jaehoon's patch

Doug Anderson (4):
  ARM: dts: Add emmc and sdmmc to the rk3288 device tree
  ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards
  ARM: dts: Take the mmc slot node out of rk3288-evb
  ARM: dts: mmc slot node gone on rk3288 => no more address / size cells

 arch/arm/boot/dts/rk3288-evb.dtsi | 24 ++++++++++++++++++++++++
 arch/arm/boot/dts/rk3288.dtsi     | 18 ++++++++++++++++++
 2 files changed, 42 insertions(+)

-- 
2.0.0.526.g5318336

             reply	other threads:[~2014-08-06 17:09 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-06 17:09 Doug Anderson [this message]
2014-08-06 17:09 ` [PATCH v3 0/4] Add eMMC and SD card support for rk3288-evb Doug Anderson
2014-08-06 17:09 ` [PATCH v3 1/4] ARM: dts: Add emmc and sdmmc to the rk3288 device tree Doug Anderson
2014-08-06 17:09   ` Doug Anderson
2014-08-12 21:06   ` Doug Anderson
2014-08-12 21:06     ` Doug Anderson
2014-08-12 21:06     ` Doug Anderson
2014-08-12 22:07     ` Heiko Stübner
2014-08-12 22:07       ` Heiko Stübner
2014-08-12 22:07       ` Heiko Stübner
2014-08-12 22:11       ` Sonny Rao
2014-08-12 22:11         ` Sonny Rao
2014-08-12 22:11         ` Sonny Rao
2014-08-12 23:24         ` Doug Anderson
2014-08-12 23:24           ` Doug Anderson
2014-08-12 23:24           ` Doug Anderson
2014-08-06 17:09 ` [PATCH v3 2/4] ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards Doug Anderson
2014-08-06 17:09   ` Doug Anderson
2014-08-06 17:09   ` Doug Anderson
2014-08-06 17:09 ` [PATCH v3 3/4] ARM: dts: Take the mmc slot node out of rk3288-evb Doug Anderson
2014-08-06 17:09   ` Doug Anderson
2014-08-06 17:09   ` Doug Anderson
2014-08-06 17:09 ` [PATCH v3 4/4] ARM: dts: mmc slot node gone on rk3288 => no more address / size cells Doug Anderson
2014-08-06 17:09   ` Doug Anderson
2014-08-06 17:09   ` Doug Anderson
2014-08-07  8:24 ` [PATCH v3 0/4] Add eMMC and SD card support for rk3288-evb Jaehoon Chung
2014-08-07  8:24   ` Jaehoon Chung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407344984-14176-1-git-send-email-dianders@chromium.org \
    --to=dianders@chromium.org \
    --cc=addy.ke@rock-chips.com \
    --cc=arnd@arndb.de \
    --cc=chris@printf.net \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=heiko@sntech.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jh80.chung@samsung.com \
    --cc=kever.yang@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sonnyrao@chromium.org \
    --cc=tgih.jun@samsung.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.