All of lore.kernel.org
 help / color / mirror / Atom feed
From: Caesar Wang <caesar.wang@rock-chips.com>
To: heiko@sntech.de, rui.zhang@intel.com, edubezval@gmail.com
Cc: zyf@rock-chips.com, dianders@chromium.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	cf@rock-chips.com, dmitry.torokhov@gmail.com,
	dbasehore@chromium.org, huangtao@rock-chips.com,
	cjf@rock-chips.com, zhengsq@rock-chips.com,
	vladimir_zapolskiy@mentor.com,
	Caesar Wang <caesar.wang@rock-chips.com>
Subject: [PATCH v11 2/5] dt-bindings: document Rockchip thermal
Date: Thu, 16 Oct 2014 21:31:38 +0800	[thread overview]
Message-ID: <1413466301-25952-3-git-send-email-caesar.wang@rock-chips.com> (raw)
In-Reply-To: <1413466301-25952-1-git-send-email-caesar.wang@rock-chips.com>

This add the necessary binding documentation for the thermal
found on Rockchip SoCs

Signed-off-by: zhaoyifeng <zyf@rock-chips.com>
Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
---
 .../bindings/thermal/rockchip-thermal.txt          | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
new file mode 100644
index 0000000..d5ff410
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -0,0 +1,45 @@
+* Temperature Sensor ADC (TSADC) on rockchip SoCs
+
+Required properties:
+- compatible: "rockchip,rk3288-tsadc"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+	      depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for
+	       the peripheral clock.
+- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description.
+
+Exiample:
+tsadc: tsadc@ff280000 {
+	compatible = "rockchip,rk3288-tsadc";
+	reg = <0xff280000 0x100>;
+	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+	clock-names = "tsadc", "apb_pclk";
+};
+
+Example: referring to thermal sensors:
+thermal-zones {
+       cpu_thermal: cpu_thermal {
+	        polling-delay-passive = <500>; /* milliseconds */
+	        polling-delay = <1000>; /* milliseconds */
+
+			        /* sensor	ID */
+	        thermal-sensors = <&tsadc	1>;
+
+	        trips {
+		        cpu_alert0: cpu_alert {
+			        temperature = <80000>; /* millicelsius */
+			        hysteresis = <2000>; /* millicelsius */
+			        type = "passive";
+		        };
+		        cpu_crit: cpu_crit {
+			        temperature = <125000>; /* millicelsius */
+			        hysteresis = <2000>; /* millicelsius */
+			    type = "critical";
+		        };
+	        };
+       };
+};
-- 
1.9.1



WARNING: multiple messages have this Message-ID (diff)
From: caesar.wang@rock-chips.com (Caesar Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 2/5] dt-bindings: document Rockchip thermal
Date: Thu, 16 Oct 2014 21:31:38 +0800	[thread overview]
Message-ID: <1413466301-25952-3-git-send-email-caesar.wang@rock-chips.com> (raw)
In-Reply-To: <1413466301-25952-1-git-send-email-caesar.wang@rock-chips.com>

This add the necessary binding documentation for the thermal
found on Rockchip SoCs

Signed-off-by: zhaoyifeng <zyf@rock-chips.com>
Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
---
 .../bindings/thermal/rockchip-thermal.txt          | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
new file mode 100644
index 0000000..d5ff410
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -0,0 +1,45 @@
+* Temperature Sensor ADC (TSADC) on rockchip SoCs
+
+Required properties:
+- compatible: "rockchip,rk3288-tsadc"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+	      depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for
+	       the peripheral clock.
+- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description.
+
+Exiample:
+tsadc: tsadc at ff280000 {
+	compatible = "rockchip,rk3288-tsadc";
+	reg = <0xff280000 0x100>;
+	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+	clock-names = "tsadc", "apb_pclk";
+};
+
+Example: referring to thermal sensors:
+thermal-zones {
+       cpu_thermal: cpu_thermal {
+	        polling-delay-passive = <500>; /* milliseconds */
+	        polling-delay = <1000>; /* milliseconds */
+
+			        /* sensor	ID */
+	        thermal-sensors = <&tsadc	1>;
+
+	        trips {
+		        cpu_alert0: cpu_alert {
+			        temperature = <80000>; /* millicelsius */
+			        hysteresis = <2000>; /* millicelsius */
+			        type = "passive";
+		        };
+		        cpu_crit: cpu_crit {
+			        temperature = <125000>; /* millicelsius */
+			        hysteresis = <2000>; /* millicelsius */
+			    type = "critical";
+		        };
+	        };
+       };
+};
-- 
1.9.1

  parent reply	other threads:[~2014-10-16 13:32 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-16 13:31 [PATCH v11 0/5] Rockchip soc thermal driver Caesar Wang
2014-10-16 13:31 ` Caesar Wang
2014-10-16 13:31 ` [PATCH v11 1/5] thermal: rockchip: add driver for thermal Caesar Wang
2014-10-16 13:31   ` Caesar Wang
2014-10-16 22:06   ` Dmitry Torokhov
2014-10-16 22:06     ` Dmitry Torokhov
2014-10-16 22:52   ` Dmitry Torokhov
2014-10-16 22:52     ` Dmitry Torokhov
2014-10-16 23:15   ` Vladimir Zapolskiy
2014-10-16 23:15     ` Vladimir Zapolskiy
2014-10-16 23:15     ` Vladimir Zapolskiy
2014-10-16 13:31 ` Caesar Wang [this message]
2014-10-16 13:31   ` [PATCH v11 2/5] dt-bindings: document Rockchip thermal Caesar Wang
2014-10-16 13:31 ` [PATCH v11 3/5] ARM: dts: add RK3288 Thermal data Caesar Wang
2014-10-16 13:31   ` Caesar Wang
2014-10-16 13:31 ` [PATCH v11 4/5] ARM: dts: add main Thermal info to rk3288 Caesar Wang
2014-10-16 13:31   ` Caesar Wang
2014-10-16 21:53   ` Dmitry Torokhov
2014-10-16 21:53     ` Dmitry Torokhov
2014-10-16 13:31 ` [PATCH v11 5/5] ARM: dts: enable Thermal on rk3288-evb board Caesar Wang
2014-10-16 13:31   ` Caesar Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413466301-25952-3-git-send-email-caesar.wang@rock-chips.com \
    --to=caesar.wang@rock-chips.com \
    --cc=cf@rock-chips.com \
    --cc=cjf@rock-chips.com \
    --cc=dbasehore@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=edubezval@gmail.com \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=rui.zhang@intel.com \
    --cc=vladimir_zapolskiy@mentor.com \
    --cc=zhengsq@rock-chips.com \
    --cc=zyf@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.