From: Anson Huang <b20788@freescale.com> To: <linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org> Cc: <edubezval@gmail.com>, <rui.zhang@intel.com>, <jangra.pankaj9@gmail.com> Subject: [PATCH V2] Thermal: imx: add clk disable/enable for suspend/resume Date: Tue, 6 Jan 2015 18:50:22 +0800 [thread overview] Message-ID: <1420541422-27602-1-git-send-email-b20788@freescale.com> (raw) Thermal sensor's clk is from pll3_usb_otg, per hardware design requirement, need to make sure pll3_usb_otg is disabled before STOP mode is entered, otherwise, all PFDs under it may enter incorrect state, this patch disables pll3_usb_otg before suspend and enables it after resume. Signed-off-by: Anson Huang <b20788@freescale.com> --- drivers/thermal/imx_thermal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 461bf3d..dc8bcd8 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -600,6 +600,7 @@ static int imx_thermal_suspend(struct device *dev) regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); data->mode = THERMAL_DEVICE_DISABLED; + clk_disable_unprepare(data->thermal_clk); return 0; } @@ -609,6 +610,7 @@ static int imx_thermal_resume(struct device *dev) struct imx_thermal_data *data = dev_get_drvdata(dev); struct regmap *map = data->tempmon; + clk_prepare_enable(data->thermal_clk); /* Enabled thermal sensor after resume */ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Anson Huang <b20788@freescale.com> To: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org Cc: edubezval@gmail.com, rui.zhang@intel.com, jangra.pankaj9@gmail.com Subject: [PATCH V2] Thermal: imx: add clk disable/enable for suspend/resume Date: Tue, 6 Jan 2015 18:50:22 +0800 [thread overview] Message-ID: <1420541422-27602-1-git-send-email-b20788@freescale.com> (raw) Thermal sensor's clk is from pll3_usb_otg, per hardware design requirement, need to make sure pll3_usb_otg is disabled before STOP mode is entered, otherwise, all PFDs under it may enter incorrect state, this patch disables pll3_usb_otg before suspend and enables it after resume. Signed-off-by: Anson Huang <b20788@freescale.com> --- drivers/thermal/imx_thermal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 461bf3d..dc8bcd8 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -600,6 +600,7 @@ static int imx_thermal_suspend(struct device *dev) regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); data->mode = THERMAL_DEVICE_DISABLED; + clk_disable_unprepare(data->thermal_clk); return 0; } @@ -609,6 +610,7 @@ static int imx_thermal_resume(struct device *dev) struct imx_thermal_data *data = dev_get_drvdata(dev); struct regmap *map = data->tempmon; + clk_prepare_enable(data->thermal_clk); /* Enabled thermal sensor after resume */ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); -- 1.9.1
next reply other threads:[~2015-01-06 2:55 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-06 10:50 Anson Huang [this message] 2015-01-06 10:50 ` [PATCH V2] Thermal: imx: add clk disable/enable for suspend/resume Anson Huang 2015-01-06 13:25 ` Eduardo Valentin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1420541422-27602-1-git-send-email-b20788@freescale.com \ --to=b20788@freescale.com \ --cc=edubezval@gmail.com \ --cc=jangra.pankaj9@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=rui.zhang@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.