From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Intel-gfx@lists.freedesktop.org
Subject: [PATCH 2/8] drm/i915/skl: Allow scanning out Y and Yf fbs
Date: Fri, 27 Feb 2015 11:15:18 +0000 [thread overview]
Message-ID: <1425035724-7123-3-git-send-email-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <1425035724-7123-1-git-send-email-tvrtko.ursulin@linux.intel.com>
From: Damien Lespiau <damien.lespiau@intel.com>
Skylake is able to scannout those tiling formats. We need to allow them
in the ADDFB ioctl and tell the harware about it.
v2: Rebased for addfb2 interface. (Tvrtko Ursulin)
v3: Rebased for fb modifier changes. (Tvrtko Ursulin)
v4: Don't allow Y tiled fbs just yet. (Tvrtko Ursulin)
v5: Check for stride alignment and max pitch. (Tvrtko Ursulin)
v6: Simplify maximum pitch check. (Ville Syrjälä)
v7: Drop the gen9 check since requirements are no different. (Ville Syrjälä)
v8: Gen2 has different X tiling stride. (Ville Syrjälä)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> (v7)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 121 +++++++++++++++++++++++++----------
drivers/gpu/drm/i915/intel_drv.h | 2 +
drivers/gpu/drm/i915/intel_sprite.c | 18 ++++--
3 files changed, 101 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 94efacb..cf0eadc 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2734,6 +2734,40 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
POSTING_READ(reg);
}
+u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier,
+ uint32_t pixel_format)
+{
+ u32 bits_per_pixel = drm_format_plane_cpp(pixel_format, 0) * 8;
+
+ /*
+ * The stride is either expressed as a multiple of 64 bytes
+ * chunks for linear buffers or in number of tiles for tiled
+ * buffers.
+ */
+ switch (fb_modifier) {
+ case DRM_FORMAT_MOD_NONE:
+ return 64;
+ case I915_FORMAT_MOD_X_TILED:
+ if (INTEL_INFO(dev)->gen == 2)
+ return 128;
+ return 512;
+ case I915_FORMAT_MOD_Y_TILED:
+ /* No need to check for old gens and Y tiling since this is
+ * about the display engine and those will be blocked before
+ * we get here.
+ */
+ return 128;
+ case I915_FORMAT_MOD_Yf_TILED:
+ if (bits_per_pixel == 8)
+ return 64;
+ else
+ return 128;
+ default:
+ MISSING_CASE(fb_modifier);
+ return 64;
+ }
+}
+
static void skylake_update_primary_plane(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int x, int y)
@@ -2741,10 +2775,9 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_framebuffer *intel_fb;
struct drm_i915_gem_object *obj;
int pipe = intel_crtc->pipe;
- u32 plane_ctl, stride;
+ u32 plane_ctl, stride_div;
if (!intel_crtc->primary_enabled) {
I915_WRITE(PLANE_CTL(pipe, 0), 0);
@@ -2788,29 +2821,30 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
BUG();
}
- intel_fb = to_intel_framebuffer(fb);
- obj = intel_fb->obj;
-
- /*
- * The stride is either expressed as a multiple of 64 bytes chunks for
- * linear buffers or in number of tiles for tiled buffers.
- */
switch (fb->modifier[0]) {
case DRM_FORMAT_MOD_NONE:
- stride = fb->pitches[0] >> 6;
break;
case I915_FORMAT_MOD_X_TILED:
plane_ctl |= PLANE_CTL_TILED_X;
- stride = fb->pitches[0] >> 9;
+ break;
+ case I915_FORMAT_MOD_Y_TILED:
+ plane_ctl |= PLANE_CTL_TILED_Y;
+ break;
+ case I915_FORMAT_MOD_Yf_TILED:
+ plane_ctl |= PLANE_CTL_TILED_YF;
break;
default:
- BUG();
+ MISSING_CASE(fb->modifier[0]);
}
plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
if (crtc->primary->state->rotation == BIT(DRM_ROTATE_180))
plane_ctl |= PLANE_CTL_ROTATE_180;
+ obj = intel_fb_obj(fb);
+ stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
+ fb->pixel_format);
+
I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
DRM_DEBUG_KMS("Writing base %08lX %d,%d,%d,%d pitch=%d\n",
@@ -2823,7 +2857,7 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
I915_WRITE(PLANE_SIZE(pipe, 0),
(intel_crtc->config->pipe_src_h - 1) << 16 |
(intel_crtc->config->pipe_src_w - 1));
- I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
+ I915_WRITE(PLANE_STRIDE(pipe, 0), fb->pitches[0] / stride_div);
I915_WRITE(PLANE_SURF(pipe, 0), i915_gem_obj_ggtt_offset(obj));
POSTING_READ(PLANE_SURF(pipe, 0));
@@ -12683,14 +12717,43 @@ static const struct drm_framebuffer_funcs intel_fb_funcs = {
.create_handle = intel_user_framebuffer_create_handle,
};
+static
+u32 intel_fb_pitch_limit(struct drm_device *dev, uint64_t fb_modifier,
+ uint32_t pixel_format)
+{
+ u32 gen = INTEL_INFO(dev)->gen;
+
+ if (gen >= 9) {
+ /* "The stride in bytes must not exceed the of the size of 8K
+ * pixels and 32K bytes."
+ */
+ return min(8192*drm_format_plane_cpp(pixel_format, 0), 32768);
+ } else if (gen >= 5 && !IS_VALLEYVIEW(dev)) {
+ return 32*1024;
+ } else if (gen >= 4) {
+ if (fb_modifier == I915_FORMAT_MOD_X_TILED)
+ return 16*1024;
+ else
+ return 32*1024;
+ } else if (gen >= 3) {
+ if (fb_modifier == I915_FORMAT_MOD_X_TILED)
+ return 8*1024;
+ else
+ return 16*1024;
+ } else {
+ /* XXX DSPC is limited to 4k tiled */
+ return 8*1024;
+ }
+}
+
static int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *intel_fb,
struct drm_mode_fb_cmd2 *mode_cmd,
struct drm_i915_gem_object *obj)
{
int aligned_height;
- int pitch_limit;
int ret;
+ u32 pitch_limit, stride_alignment;
WARN_ON(!mutex_is_locked(&dev->struct_mutex));
@@ -12716,31 +12779,19 @@ static int intel_framebuffer_init(struct drm_device *dev,
return -EINVAL;
}
- if (mode_cmd->pitches[0] & 63) {
- DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n",
- mode_cmd->pitches[0]);
+ stride_alignment = intel_fb_stride_alignment(dev, mode_cmd->modifier[0],
+ mode_cmd->pixel_format);
+ if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
+ DRM_DEBUG("pitch (%d) must be at least %u byte aligned\n",
+ mode_cmd->pitches[0], stride_alignment);
return -EINVAL;
}
- if (INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev)) {
- pitch_limit = 32*1024;
- } else if (INTEL_INFO(dev)->gen >= 4) {
- if (mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED)
- pitch_limit = 16*1024;
- else
- pitch_limit = 32*1024;
- } else if (INTEL_INFO(dev)->gen >= 3) {
- if (mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED)
- pitch_limit = 8*1024;
- else
- pitch_limit = 16*1024;
- } else
- /* XXX DSPC is limited to 4k tiled */
- pitch_limit = 8*1024;
-
+ pitch_limit = intel_fb_pitch_limit(dev, mode_cmd->modifier[0],
+ mode_cmd->pixel_format);
if (mode_cmd->pitches[0] > pitch_limit) {
- DRM_DEBUG("%s pitch (%d) must be at less than %d\n",
- mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED ?
+ DRM_DEBUG("%s pitch (%u) must be at less than %d\n",
+ mode_cmd->modifier[0] != DRM_FORMAT_MOD_NONE ?
"tiled" : "linear",
mode_cmd->pitches[0], pitch_limit);
return -EINVAL;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 4997bc9..e21d26c 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -903,6 +903,8 @@ int intel_fb_align_height(struct drm_device *dev, int height,
uint64_t fb_format_modifier);
void intel_fb_obj_flush(struct drm_i915_gem_object *obj, bool retire);
+u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier,
+ uint32_t pixel_format);
/* intel_audio.c */
void intel_init_audio(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 5ae56ec..b7103bd 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -189,7 +189,7 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane + 1;
- u32 plane_ctl, stride;
+ u32 plane_ctl, stride_div;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
@@ -247,15 +247,20 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
switch (fb->modifier[0]) {
case DRM_FORMAT_MOD_NONE:
- stride = fb->pitches[0] >> 6;
break;
case I915_FORMAT_MOD_X_TILED:
plane_ctl |= PLANE_CTL_TILED_X;
- stride = fb->pitches[0] >> 9;
+ break;
+ case I915_FORMAT_MOD_Y_TILED:
+ plane_ctl |= PLANE_CTL_TILED_Y;
+ break;
+ case I915_FORMAT_MOD_Yf_TILED:
+ plane_ctl |= PLANE_CTL_TILED_YF;
break;
default:
- BUG();
+ MISSING_CASE(fb->modifier[0]);
}
+
if (drm_plane->state->rotation == BIT(DRM_ROTATE_180))
plane_ctl |= PLANE_CTL_ROTATE_180;
@@ -266,6 +271,9 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
+ stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
+ fb->pixel_format);
+
/* Sizes are 0 based */
src_w--;
src_h--;
@@ -273,7 +281,7 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
crtc_h--;
I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
- I915_WRITE(PLANE_STRIDE(pipe, plane), stride);
+ I915_WRITE(PLANE_STRIDE(pipe, plane), fb->pitches[0] / stride_div);
I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
--
2.3.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-02-27 11:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-27 11:15 [PATCH v5 0/8] Skylake Y tiled scanout Tvrtko Ursulin
2015-02-27 11:15 ` [PATCH 1/8] drm/i915/skl: Add new displayable tiling formats Tvrtko Ursulin
2015-02-27 11:15 ` Tvrtko Ursulin [this message]
2015-02-27 11:15 ` [PATCH 3/8] drm/i915/skl: Adjust intel_fb_align_height() for Yb/Yf tiling Tvrtko Ursulin
2015-02-27 11:15 ` [PATCH 4/8] drm/i915/skl: Teach pin_and_fence_fb_obj() about Y tiling constraints Tvrtko Ursulin
2015-02-27 11:15 ` [PATCH 5/8] drm/i915/skl: Adjust get_plane_config() to support Yb/Yf tiling Tvrtko Ursulin
2015-02-27 11:15 ` [PATCH 6/8] drm/i915/skl: Updated watermark programming Tvrtko Ursulin
2015-02-27 11:15 ` [PATCH 7/8] drm/i915/skl: Update watermarks for Y tiling Tvrtko Ursulin
2015-02-27 15:12 ` Tvrtko Ursulin
2015-02-27 11:15 ` [PATCH 8/8] drm/i915/skl: Allow Y (and Yf) frame buffer creation Tvrtko Ursulin
2015-02-27 15:27 ` [PATCH v5 0/8] Skylake Y tiled scanout Daniel Vetter
-- strict thread matches above, loose matches on Subject: below --
2015-02-25 16:47 [PATCH v4 " Tvrtko Ursulin
2015-02-25 16:47 ` [PATCH 2/8] drm/i915/skl: Allow scanning out Y and Yf fbs Tvrtko Ursulin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425035724-7123-3-git-send-email-tvrtko.ursulin@linux.intel.com \
--to=tvrtko.ursulin@linux.intel.com \
--cc=Intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.