From: Ray Jui <rjui@broadcom.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Arnd Bergmann <arnd@arndb.de>, Hauke Mehrtens <hauke@hauke-m.de>,
Paul Bolle <pebolle@tiscali.nl>,
"Rob Herring" <robh+dt@kernel.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Dmitry Torokhov <dtor@google.com>,
Anatol Pomazau <anatol@google.com>,
Scott Branden <sbranden@broadcom.com>,
<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<bcm-kernel-feedback-list@broadcom.com>,
<devicetree@vger.kernel.org>, "Ray Jui" <rjui@broadcom.com>
Subject: [PATCH v7 4/4] ARM: dts: enable PCIe support for Cygnus
Date: Thu, 12 Mar 2015 17:48:52 -0700 [thread overview]
Message-ID: <1426207732-31625-5-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1426207732-31625-1-git-send-email-rjui@broadcom.com>
Add PCIe device nodes in bcm-cygnus.dtsi but keep them disabled there.
Only enable them for bcm958300k where PCIe interfaces are populated
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 42 +++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm958300k.dts | 8 +++++++
2 files changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index ff5fb6a..ee0c6e4 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -90,6 +90,48 @@
status = "disabled";
};
+ pcie0: pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000
+ 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie@18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000
+ 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+ status = "disabled";
+ };
+
uart0: serial@18020000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index f1bb36f..c9eb856 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -47,6 +47,14 @@
bootargs = "console=ttyS0,115200";
};
+ pcie0: pcie@18012000 {
+ status = "okay";
+ };
+
+ pcie1: pcie@18013000 {
+ status = "okay";
+ };
+
uart3: serial@18023000 {
status = "okay";
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Ray Jui <rjui@broadcom.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Arnd Bergmann <arnd@arndb.de>, Hauke Mehrtens <hauke@hauke-m.de>,
Paul Bolle <pebolle@tiscali.nl>, Rob Herring <robh+dt@kernel.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Dmitry Torokhov <dtor@google.com>,
Anatol Pomazau <anatol@google.com>,
Scott Branden <sbranden@broadcom.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org, Ray Jui <rjui@broadcom.com>
Subject: [PATCH v7 4/4] ARM: dts: enable PCIe support for Cygnus
Date: Thu, 12 Mar 2015 17:48:52 -0700 [thread overview]
Message-ID: <1426207732-31625-5-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1426207732-31625-1-git-send-email-rjui@broadcom.com>
Add PCIe device nodes in bcm-cygnus.dtsi but keep them disabled there.
Only enable them for bcm958300k where PCIe interfaces are populated
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 42 +++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm958300k.dts | 8 +++++++
2 files changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index ff5fb6a..ee0c6e4 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -90,6 +90,48 @@
status = "disabled";
};
+ pcie0: pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000
+ 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie@18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000
+ 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+ status = "disabled";
+ };
+
uart0: serial@18020000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index f1bb36f..c9eb856 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -47,6 +47,14 @@
bootargs = "console=ttyS0,115200";
};
+ pcie0: pcie@18012000 {
+ status = "okay";
+ };
+
+ pcie1: pcie@18013000 {
+ status = "okay";
+ };
+
uart3: serial@18023000 {
status = "okay";
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: rjui@broadcom.com (Ray Jui)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 4/4] ARM: dts: enable PCIe support for Cygnus
Date: Thu, 12 Mar 2015 17:48:52 -0700 [thread overview]
Message-ID: <1426207732-31625-5-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1426207732-31625-1-git-send-email-rjui@broadcom.com>
Add PCIe device nodes in bcm-cygnus.dtsi but keep them disabled there.
Only enable them for bcm958300k where PCIe interfaces are populated
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 42 +++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm958300k.dts | 8 +++++++
2 files changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index ff5fb6a..ee0c6e4 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -90,6 +90,48 @@
status = "disabled";
};
+ pcie0: pcie at 18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000
+ 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie at 18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000
+ 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+ status = "disabled";
+ };
+
uart0: serial at 18020000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index f1bb36f..c9eb856 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -47,6 +47,14 @@
bootargs = "console=ttyS0,115200";
};
+ pcie0: pcie at 18012000 {
+ status = "okay";
+ };
+
+ pcie1: pcie at 18013000 {
+ status = "okay";
+ };
+
uart3: serial at 18023000 {
status = "okay";
};
--
1.7.9.5
next prev parent reply other threads:[~2015-03-13 0:47 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-13 0:48 [PATCH v7 0/4] pci: iproc: Add Broadcom iProc PCIe support Ray Jui
2015-03-13 0:48 ` Ray Jui
2015-03-13 0:48 ` Ray Jui
2015-03-13 0:48 ` [PATCH v7 1/4] PCI: Export symbols of PCI functions Ray Jui
2015-03-13 0:48 ` Ray Jui
2015-03-13 0:48 ` Ray Jui
2015-03-13 0:48 ` [PATCH v7 2/4] pci: iProc: define iProc PCIe platform bus binding Ray Jui
2015-03-13 0:48 ` Ray Jui
2015-03-13 0:48 ` Ray Jui
2015-03-13 0:48 ` [PATCH v7 3/4] pci: iproc: Add Broadcom iProc PCIe support Ray Jui
2015-03-13 0:48 ` Ray Jui
2015-03-13 0:48 ` Ray Jui
2015-03-13 0:48 ` Ray Jui [this message]
2015-03-13 0:48 ` [PATCH v7 4/4] ARM: dts: enable PCIe support for Cygnus Ray Jui
2015-03-13 0:48 ` Ray Jui
2015-03-19 21:05 ` [PATCH v7 0/4] pci: iproc: Add Broadcom iProc PCIe support Bjorn Helgaas
2015-03-19 21:05 ` Bjorn Helgaas
2015-03-19 21:05 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426207732-31625-5-git-send-email-rjui@broadcom.com \
--to=rjui@broadcom.com \
--cc=anatol@google.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=dtor@google.com \
--cc=f.fainelli@gmail.com \
--cc=galak@codeaurora.org \
--cc=hauke@hauke-m.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=pebolle@tiscali.nl \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.