From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
To: Kukjin Kim <kgene@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Subject: [PATCHv2 04/11] ARM: dts: exynos4: Use labels for overriding nodes in SMDKv310
Date: Fri, 17 Apr 2015 22:21:05 +0900 [thread overview]
Message-ID: <1429276870-19506-5-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1429276870-19506-1-git-send-email-k.kozlowski.k@gmail.com>
Usage of lablels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
arch/arm/boot/dts/exynos4210-smdkv310.dts | 280 +++++++++++++++---------------
1 file changed, 140 insertions(+), 140 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 86216fff1b4f..043b03caff8f 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -30,181 +30,181 @@
stdout-path = &serial_1;
};
- sdhci@12530000 {
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- status = "okay";
- };
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <12000000>;
+ };
- g2d@12800000 {
- status = "okay";
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
};
+};
- codec@13400000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
- };
+&g2d {
+ status = "okay";
+};
- serial@13800000 {
- status = "okay";
- };
+&i2c_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
- serial@13810000 {
- status = "okay";
+ eeprom@50 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x50>;
};
- serial@13820000 {
- status = "okay";
+ eeprom@52 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x52>;
};
+};
- serial@13830000 {
- status = "okay";
+&keypad {
+ samsung,keypad-num-rows = <2>;
+ samsung,keypad-num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_rows &keypad_cols>;
+ status = "okay";
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <2>;
};
- pinctrl@11000000 {
- keypad_rows: keypad-rows {
- samsung,pins = "gpx2-0", "gpx2-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- keypad_cols: keypad-cols {
- samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
- "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <3>;
};
- keypad@100A0000 {
- samsung,keypad-num-rows = <2>;
- samsung,keypad-num-columns = <8>;
- linux,keypad-no-autorepeat;
- linux,keypad-wakeup;
- pinctrl-names = "default";
- pinctrl-0 = <&keypad_rows &keypad_cols>;
- status = "okay";
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
- key_1 {
- keypad,row = <0>;
- keypad,column = <3>;
- linux,code = <2>;
- };
+ key_4 {
+ keypad,row = <0>;
+ keypad,column = <6>;
+ linux,code = <5>;
+ };
- key_2 {
- keypad,row = <0>;
- keypad,column = <4>;
- linux,code = <3>;
- };
+ key_5 {
+ keypad,row = <0>;
+ keypad,column = <7>;
+ linux,code = <6>;
+ };
- key_3 {
- keypad,row = <0>;
- keypad,column = <5>;
- linux,code = <4>;
- };
+ key_a {
+ keypad,row = <1>;
+ keypad,column = <3>;
+ linux,code = <30>;
+ };
- key_4 {
- keypad,row = <0>;
- keypad,column = <6>;
- linux,code = <5>;
- };
+ key_b {
+ keypad,row = <1>;
+ keypad,column = <4>;
+ linux,code = <48>;
+ };
- key_5 {
- keypad,row = <0>;
- keypad,column = <7>;
- linux,code = <6>;
- };
+ key_c {
+ keypad,row = <1>;
+ keypad,column = <5>;
+ linux,code = <46>;
+ };
- key_a {
- keypad,row = <1>;
- keypad,column = <3>;
- linux,code = <30>;
- };
+ key_d {
+ keypad,row = <1>;
+ keypad,column = <6>;
+ linux,code = <32>;
+ };
- key_b {
- keypad,row = <1>;
- keypad,column = <4>;
- linux,code = <48>;
- };
+ key_e {
+ keypad,row = <1>;
+ keypad,column = <7>;
+ linux,code = <18>;
+ };
+};
- key_c {
- keypad,row = <1>;
- keypad,column = <5>;
- linux,code = <46>;
- };
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+};
- key_d {
- keypad,row = <1>;
- keypad,column = <6>;
- linux,code = <32>;
- };
+&pinctrl_1 {
+ keypad_rows: keypad-rows {
+ samsung,pins = "gpx2-0", "gpx2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
- key_e {
- keypad,row = <1>;
- keypad,column = <7>;
- linux,code = <18>;
- };
+ keypad_cols: keypad-cols {
+ samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+ "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
};
+};
- i2c@13860000 {
- #address-cells = <1>;
- #size-cells = <0>;
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <100000>;
- status = "okay";
-
- eeprom@50 {
- compatible = "samsung,24ad0xd1";
- reg = <0x50>;
- };
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ status = "okay";
+};
- eeprom@52 {
- compatible = "samsung,24ad0xd1";
- reg = <0x52>;
- };
- };
+&serial_0 {
+ status = "okay";
+};
- spi_2: spi@13940000 {
- cs-gpios = <&gpc1 2 0>;
- status = "okay";
+&serial_1 {
+ status = "okay";
+};
- w25x80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
+&serial_2 {
+ status = "okay";
+};
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
+&serial_3 {
+ status = "okay";
+};
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
+&spi_2 {
+ cs-gpios = <&gpc1 2 0>;
+ status = "okay";
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
- };
+ w25x80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
};
- };
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <12000000>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
};
- xusbxti {
- compatible = "samsung,clock-xusbxti";
- clock-frequency = <24000000>;
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
};
};
};
--
2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
To: Kukjin Kim <kgene@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Olof Johansson <olof@lixom.net>,
Krzysztof Kozlowski <k.kozlowski.k@gmail.com>,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCHv2 04/11] ARM: dts: exynos4: Use labels for overriding nodes in SMDKv310
Date: Fri, 17 Apr 2015 22:21:05 +0900 [thread overview]
Message-ID: <1429276870-19506-5-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1429276870-19506-1-git-send-email-k.kozlowski.k@gmail.com>
Usage of lablels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
arch/arm/boot/dts/exynos4210-smdkv310.dts | 280 +++++++++++++++---------------
1 file changed, 140 insertions(+), 140 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 86216fff1b4f..043b03caff8f 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -30,181 +30,181 @@
stdout-path = &serial_1;
};
- sdhci@12530000 {
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- status = "okay";
- };
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <12000000>;
+ };
- g2d@12800000 {
- status = "okay";
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
};
+};
- codec@13400000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
- };
+&g2d {
+ status = "okay";
+};
- serial@13800000 {
- status = "okay";
- };
+&i2c_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
- serial@13810000 {
- status = "okay";
+ eeprom@50 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x50>;
};
- serial@13820000 {
- status = "okay";
+ eeprom@52 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x52>;
};
+};
- serial@13830000 {
- status = "okay";
+&keypad {
+ samsung,keypad-num-rows = <2>;
+ samsung,keypad-num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_rows &keypad_cols>;
+ status = "okay";
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <2>;
};
- pinctrl@11000000 {
- keypad_rows: keypad-rows {
- samsung,pins = "gpx2-0", "gpx2-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- keypad_cols: keypad-cols {
- samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
- "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <3>;
};
- keypad@100A0000 {
- samsung,keypad-num-rows = <2>;
- samsung,keypad-num-columns = <8>;
- linux,keypad-no-autorepeat;
- linux,keypad-wakeup;
- pinctrl-names = "default";
- pinctrl-0 = <&keypad_rows &keypad_cols>;
- status = "okay";
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
- key_1 {
- keypad,row = <0>;
- keypad,column = <3>;
- linux,code = <2>;
- };
+ key_4 {
+ keypad,row = <0>;
+ keypad,column = <6>;
+ linux,code = <5>;
+ };
- key_2 {
- keypad,row = <0>;
- keypad,column = <4>;
- linux,code = <3>;
- };
+ key_5 {
+ keypad,row = <0>;
+ keypad,column = <7>;
+ linux,code = <6>;
+ };
- key_3 {
- keypad,row = <0>;
- keypad,column = <5>;
- linux,code = <4>;
- };
+ key_a {
+ keypad,row = <1>;
+ keypad,column = <3>;
+ linux,code = <30>;
+ };
- key_4 {
- keypad,row = <0>;
- keypad,column = <6>;
- linux,code = <5>;
- };
+ key_b {
+ keypad,row = <1>;
+ keypad,column = <4>;
+ linux,code = <48>;
+ };
- key_5 {
- keypad,row = <0>;
- keypad,column = <7>;
- linux,code = <6>;
- };
+ key_c {
+ keypad,row = <1>;
+ keypad,column = <5>;
+ linux,code = <46>;
+ };
- key_a {
- keypad,row = <1>;
- keypad,column = <3>;
- linux,code = <30>;
- };
+ key_d {
+ keypad,row = <1>;
+ keypad,column = <6>;
+ linux,code = <32>;
+ };
- key_b {
- keypad,row = <1>;
- keypad,column = <4>;
- linux,code = <48>;
- };
+ key_e {
+ keypad,row = <1>;
+ keypad,column = <7>;
+ linux,code = <18>;
+ };
+};
- key_c {
- keypad,row = <1>;
- keypad,column = <5>;
- linux,code = <46>;
- };
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+};
- key_d {
- keypad,row = <1>;
- keypad,column = <6>;
- linux,code = <32>;
- };
+&pinctrl_1 {
+ keypad_rows: keypad-rows {
+ samsung,pins = "gpx2-0", "gpx2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
- key_e {
- keypad,row = <1>;
- keypad,column = <7>;
- linux,code = <18>;
- };
+ keypad_cols: keypad-cols {
+ samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+ "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
};
+};
- i2c@13860000 {
- #address-cells = <1>;
- #size-cells = <0>;
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <100000>;
- status = "okay";
-
- eeprom@50 {
- compatible = "samsung,24ad0xd1";
- reg = <0x50>;
- };
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ status = "okay";
+};
- eeprom@52 {
- compatible = "samsung,24ad0xd1";
- reg = <0x52>;
- };
- };
+&serial_0 {
+ status = "okay";
+};
- spi_2: spi@13940000 {
- cs-gpios = <&gpc1 2 0>;
- status = "okay";
+&serial_1 {
+ status = "okay";
+};
- w25x80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
+&serial_2 {
+ status = "okay";
+};
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
+&serial_3 {
+ status = "okay";
+};
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
+&spi_2 {
+ cs-gpios = <&gpc1 2 0>;
+ status = "okay";
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
- };
+ w25x80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
};
- };
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <12000000>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
};
- xusbxti {
- compatible = "samsung,clock-xusbxti";
- clock-frequency = <24000000>;
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
};
};
};
--
2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski.k@gmail.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 04/11] ARM: dts: exynos4: Use labels for overriding nodes in SMDKv310
Date: Fri, 17 Apr 2015 22:21:05 +0900 [thread overview]
Message-ID: <1429276870-19506-5-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1429276870-19506-1-git-send-email-k.kozlowski.k@gmail.com>
Usage of lablels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
arch/arm/boot/dts/exynos4210-smdkv310.dts | 280 +++++++++++++++---------------
1 file changed, 140 insertions(+), 140 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 86216fff1b4f..043b03caff8f 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -30,181 +30,181 @@
stdout-path = &serial_1;
};
- sdhci at 12530000 {
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- status = "okay";
- };
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <12000000>;
+ };
- g2d at 12800000 {
- status = "okay";
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
};
+};
- codec at 13400000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
- };
+&g2d {
+ status = "okay";
+};
- serial at 13800000 {
- status = "okay";
- };
+&i2c_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
- serial at 13810000 {
- status = "okay";
+ eeprom at 50 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x50>;
};
- serial at 13820000 {
- status = "okay";
+ eeprom at 52 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x52>;
};
+};
- serial at 13830000 {
- status = "okay";
+&keypad {
+ samsung,keypad-num-rows = <2>;
+ samsung,keypad-num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_rows &keypad_cols>;
+ status = "okay";
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <2>;
};
- pinctrl at 11000000 {
- keypad_rows: keypad-rows {
- samsung,pins = "gpx2-0", "gpx2-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- keypad_cols: keypad-cols {
- samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
- "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <3>;
};
- keypad at 100A0000 {
- samsung,keypad-num-rows = <2>;
- samsung,keypad-num-columns = <8>;
- linux,keypad-no-autorepeat;
- linux,keypad-wakeup;
- pinctrl-names = "default";
- pinctrl-0 = <&keypad_rows &keypad_cols>;
- status = "okay";
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
- key_1 {
- keypad,row = <0>;
- keypad,column = <3>;
- linux,code = <2>;
- };
+ key_4 {
+ keypad,row = <0>;
+ keypad,column = <6>;
+ linux,code = <5>;
+ };
- key_2 {
- keypad,row = <0>;
- keypad,column = <4>;
- linux,code = <3>;
- };
+ key_5 {
+ keypad,row = <0>;
+ keypad,column = <7>;
+ linux,code = <6>;
+ };
- key_3 {
- keypad,row = <0>;
- keypad,column = <5>;
- linux,code = <4>;
- };
+ key_a {
+ keypad,row = <1>;
+ keypad,column = <3>;
+ linux,code = <30>;
+ };
- key_4 {
- keypad,row = <0>;
- keypad,column = <6>;
- linux,code = <5>;
- };
+ key_b {
+ keypad,row = <1>;
+ keypad,column = <4>;
+ linux,code = <48>;
+ };
- key_5 {
- keypad,row = <0>;
- keypad,column = <7>;
- linux,code = <6>;
- };
+ key_c {
+ keypad,row = <1>;
+ keypad,column = <5>;
+ linux,code = <46>;
+ };
- key_a {
- keypad,row = <1>;
- keypad,column = <3>;
- linux,code = <30>;
- };
+ key_d {
+ keypad,row = <1>;
+ keypad,column = <6>;
+ linux,code = <32>;
+ };
- key_b {
- keypad,row = <1>;
- keypad,column = <4>;
- linux,code = <48>;
- };
+ key_e {
+ keypad,row = <1>;
+ keypad,column = <7>;
+ linux,code = <18>;
+ };
+};
- key_c {
- keypad,row = <1>;
- keypad,column = <5>;
- linux,code = <46>;
- };
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+};
- key_d {
- keypad,row = <1>;
- keypad,column = <6>;
- linux,code = <32>;
- };
+&pinctrl_1 {
+ keypad_rows: keypad-rows {
+ samsung,pins = "gpx2-0", "gpx2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
- key_e {
- keypad,row = <1>;
- keypad,column = <7>;
- linux,code = <18>;
- };
+ keypad_cols: keypad-cols {
+ samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+ "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
};
+};
- i2c at 13860000 {
- #address-cells = <1>;
- #size-cells = <0>;
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <100000>;
- status = "okay";
-
- eeprom at 50 {
- compatible = "samsung,24ad0xd1";
- reg = <0x50>;
- };
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ status = "okay";
+};
- eeprom at 52 {
- compatible = "samsung,24ad0xd1";
- reg = <0x52>;
- };
- };
+&serial_0 {
+ status = "okay";
+};
- spi_2: spi at 13940000 {
- cs-gpios = <&gpc1 2 0>;
- status = "okay";
+&serial_1 {
+ status = "okay";
+};
- w25x80 at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
+&serial_2 {
+ status = "okay";
+};
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
+&serial_3 {
+ status = "okay";
+};
- partition at 0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
+&spi_2 {
+ cs-gpios = <&gpc1 2 0>;
+ status = "okay";
- partition at 40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
- };
+ w25x80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
};
- };
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <12000000>;
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
};
- xusbxti {
- compatible = "samsung,clock-xusbxti";
- clock-frequency = <24000000>;
+ partition at 40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
};
};
};
--
2.1.0
next prev parent reply other threads:[~2015-04-17 13:24 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-17 13:21 [PATCHv2 00/11] ARM: dts: exynos4: labels for overriding nodes Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` [PATCHv2 01/11] ARM: dts: Add labels to Exynos4 nodes Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` [PATCHv2 02/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4210 Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` [PATCHv2 03/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4210 Origen Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski [this message]
2015-04-17 13:21 ` [PATCHv2 04/11] ARM: dts: exynos4: Use labels for overriding nodes in SMDKv310 Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` [PATCHv2 05/11] ARM: dts: exynos4: Use labels for overriding nodes in Trats Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` [PATCHv2 06/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4212 Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` [PATCHv2 07/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4x12 Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` [PATCHv2 08/11] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4412 Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` [PATCHv2 09/11] ARM: dts: exynos4: Use labels for overriding nodes in Odroid Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
2015-04-17 13:21 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429276870-19506-5-git-send-email-k.kozlowski.k@gmail.com \
--to=k.kozlowski.k@gmail.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.