[PATCHv3 00/10] ARM: DRA7: add display support

From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Tony Lindgren <tony@atomide.com>,
	paul@pwsan.com, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCHv3 00/10] ARM: DRA7: add display support
Date: Wed, 6 May 2015 13:08:48 +0300	[thread overview]
Message-ID: <1430906938-26128-1-git-send-email-tomi.valkeinen@ti.com> (raw)

Hi,

This series adds the arch/arm/ side of the display support for DRA7 (DRA72x,
DRA74x, AM54xx) SoCs. Also support for HDMI output on x15 and DRA72 EVM boards
is added.

This series is v3, and is based on v4.1-rc2. There are no differences to v2,
except rebased and tested.

 Tomi

Tomi Valkeinen (10):
  arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk
  ARM: DRA7: hwmod: add DMM hwmod description
  ARM: DRA7: hwmod: set DSS submodule parent hwmods
  ARM: OMAP: display: change compat names to array
  ARM: OMAP2+: display: detect DRA7 DSS
  arm/dts: dra7.dtsi: add DSS support
  arm/dts: dra72-evm.dts: add HDMI
  arm/dts: am57xx-beagle-x15.dts: add HDMI
  arm: dra7: add DESHDCP clock
  CLK: TI: always enable DESHDCP clock

 arch/arm/boot/dts/am57xx-beagle-x15.dts   |  81 ++++++++++++++++++++++
 arch/arm/boot/dts/dra7.dtsi               |  43 ++++++++++++
 arch/arm/boot/dts/dra72-evm.dts           | 110 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/dra72x.dtsi             |  11 +++
 arch/arm/boot/dts/dra74x.dtsi             |  15 ++++
 arch/arm/boot/dts/dra7xx-clocks.dtsi      |  11 +++
 arch/arm/mach-omap2/display.c             |  32 +++++----
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c |  33 +++++++++
 drivers/clk/ti/clk-7xx.c                  |   8 ++-
 9 files changed, 328 insertions(+), 16 deletions(-)

-- 
2.1.4