All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	benh@kernel.crashing.org, bhelgaas@google.com, aik@ozlabs.ru,
	panto@antoniou-consulting.com, robherring2@gmail.com,
	grant.likely@linaro.org, Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v5 23/42] powerpc/powernv: Cleanup on pnv_pci_ioda2_release_dma_pe()
Date: Thu,  4 Jun 2015 16:41:52 +1000	[thread overview]
Message-ID: <1433400131-18429-24-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1433400131-18429-1-git-send-email-gwshan@linux.vnet.ibm.com>

The patch applies cleanup on pnv_pci_ioda2_release_dma_pe():

  * Rename it to pnv_pci_ioda2_release_pe_dma() to match the
    function names used to release resources for one PE in the
    subsequent patches.
  * Remove the parameter of PCI device, which is used to figure
    out device node. VFs don't have associated device nodes in
    SRIOV case. For other cases, the device node can be figured
    out from the PCI bus or device the PE was allocated for.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
v5:
  * Newly introduced
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 3d5aec8d..2e31472 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -197,11 +197,11 @@ static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable)
 		pe->tce_bypass_enabled = enable;
 }
 
-static void pnv_pci_ioda2_release_dma_pe(struct pci_dev *dev,
-					 struct pnv_ioda_pe *pe)
+static void pnv_pci_ioda2_release_pe_dma(struct pnv_ioda_pe *pe)
 {
-	struct iommu_table    *tbl;
-	int64_t               rc;
+	struct iommu_table *tbl;
+	struct device_node *dn;
+	int64_t rc;
 
 	tbl = pe->table_group.tables[0];
 	rc = pnv_pci_ioda2_unset_window(&pe->table_group, 0);
@@ -213,8 +213,20 @@ static void pnv_pci_ioda2_release_dma_pe(struct pci_dev *dev,
 		iommu_group_put(pe->table_group.group);
 		BUG_ON(pe->table_group.group);
 	}
+
+	if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
+		dn = pci_bus_to_OF_node(pe->pbus);
+	else if (pe->flags & PNV_IODA_PE_DEV)
+		dn = pci_device_to_OF_node(pe->pdev);
+#ifdef CONFIG_PCI_IOV
+	else if (pe->flags & PNV_IODA_PE_VF)
+		dn = pci_device_to_OF_node(pe->parent_dev);
+#endif
+	else
+		dn = NULL;
+
 	pnv_pci_ioda2_table_free_pages(tbl);
-	iommu_free_table(tbl, of_node_full_name(dev->dev.of_node));
+	iommu_free_table(tbl, of_node_full_name(dn));
 }
 
 static int pnv_ioda_set_one_peltv(struct pnv_phb *phb,
@@ -1495,14 +1507,14 @@ static void pnv_ioda_release_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 		if ((pe->flags & PNV_IODA_PE_MASTER) &&
 		    (pe->flags & PNV_IODA_PE_VF)) {
 			list_for_each_entry_safe(s, sn, &pe->slaves, list) {
-				pnv_pci_ioda2_release_dma_pe(pdev, s);
+				pnv_pci_ioda2_release_pe_dma(s);
 				list_del(&s->list);
 				pnv_ioda_deconfigure_pe(phb, s);
 				pnv_ioda_free_pe(phb, s->pe_number);
 			}
 		}
 
-		pnv_pci_ioda2_release_dma_pe(pdev, pe);
+		pnv_pci_ioda2_release_pe_dma(pe);
 
 		/* Remove from list */
 		mutex_lock(&phb->ioda.pe_list_mutex);
-- 
2.1.0

  parent reply	other threads:[~2015-06-04  6:41 UTC|newest]

Thread overview: 83+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-04  6:41 [PATCH v5 00/42] PowerPC/PowerNV: PCI Slot Management Gavin Shan
2015-06-04  6:41 ` [PATCH v5 01/42] PCI: Add pcibios_setup_bridge() Gavin Shan
2015-06-05 19:44   ` Bjorn Helgaas
2015-06-09  5:49     ` Gavin Shan
2015-06-04  6:41 ` [PATCH v5 02/42] powerpc/powernv: Enable M64 on P7IOC Gavin Shan
2015-06-04  6:41 ` [PATCH v5 03/42] powerpc/powernv: M64 support improvement Gavin Shan
2015-06-04  6:41 ` [PATCH v5 07/42] powerpc/powernv: Calculate PHB's DMA weight dynamically Gavin Shan
2015-06-04  6:41 ` [PATCH v5 08/42] powerpc/powernv: DMA32 cleanup Gavin Shan
2015-06-10  4:17   ` Alexey Kardashevskiy
2015-06-10  6:12     ` Gavin Shan
2015-06-04  6:41 ` [PATCH v5 09/42] powerpc/powernv: pnv_ioda_setup_dma() configure one PE only Gavin Shan
2015-06-04  6:41 ` [PATCH v5 11/42] powerpc/powernv: Increase PE# capacity Gavin Shan
2015-06-10  4:41   ` Alexey Kardashevskiy
2015-06-10  6:18     ` Gavin Shan
2015-06-04  6:41 ` [PATCH v5 12/42] powerpc/pci: Cleanup on pci_controller_ops Gavin Shan
2015-06-10  4:43   ` Alexey Kardashevskiy
2015-06-10  6:20     ` Gavin Shan
2015-06-10  6:20       ` Gavin Shan
2015-06-04  6:41 ` [PATCH v5 14/42] powerpc/powernv: Allocate PE# in deasending order Gavin Shan
2015-06-04  6:41 ` [PATCH v5 17/42] powerpc/powernv: PE oriented during configuration Gavin Shan
2015-06-04  6:41 ` [PATCH v5 19/42] powerpc/powernv: Remove DMA32 list of PEs Gavin Shan
2015-06-04  6:41 ` [PATCH v5 20/42] powerpc/powernv: Rename pnv_ioda_get_pe() to pnv_ioda_dev_to_pe() Gavin Shan
2015-06-04  6:41 ` [PATCH v5 21/42] powerpc/powernv: Drop pnv_ioda_setup_dev_PE() Gavin Shan
     [not found] ` <1433400131-18429-1-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2015-06-04  6:41   ` [PATCH v5 04/42] powerpc/powernv: Trace consumed IO and M32 segments by PE Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:41   ` [PATCH v5 05/42] powerpc/powernv: Simplify pnv_ioda_setup_pe_seg() Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:41   ` [PATCH v5 06/42] powerpc/powernv: Improve IO and M32 mapping Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:41   ` [PATCH v5 10/42] powerpc/powernv: Trace DMA32 segments consumed by PE Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:41   ` [PATCH v5 13/42] powerpc/pci: Override pcibios_setup_bridge() Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:41   ` [PATCH v5 15/42] powerpc/powernv: Reserve PE# for root bus Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:41   ` [PATCH v5 16/42] powerpc/powernv: Create PEs dynamically Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:41   ` [PATCH v5 18/42] powerpc/powernv: Helper function pnv_ioda_init_pe() Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:41   ` [PATCH v5 22/42] powerpc/powernv: Move functions around Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:41   ` [PATCH v5 24/42] powerpc/powernv: Release PEs dynamically Gavin Shan
2015-06-04  6:41     ` Gavin Shan
2015-06-04  6:42   ` [PATCH v5 34/42] powerpc/pci: Delay creating pci_dn Gavin Shan
2015-06-04  6:42     ` Gavin Shan
2015-06-04  6:42   ` [PATCH v5 36/42] powerpc/pci: Export traverse_pci_device_nodes() Gavin Shan
2015-06-04  6:42     ` Gavin Shan
2015-06-04  6:42   ` [PATCH v5 39/42] drivers/of: Unflatten nodes equal or deeper than specified level Gavin Shan
2015-06-04  6:42     ` Gavin Shan
     [not found]     ` <1433400131-18429-40-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2015-06-30 17:47       ` Grant Likely
2015-06-30 17:47         ` Grant Likely
2015-06-04  6:41 ` Gavin Shan [this message]
2015-06-04  6:41 ` [PATCH v5 25/42] powerpc/powernv: Supports slot ID Gavin Shan
2015-06-04  6:41 ` [PATCH v5 26/42] powerpc/powernv: Use PCI slot reset infrastructure Gavin Shan
2015-06-04  6:41 ` [PATCH v5 27/42] powerpc/powernv: Simplify pnv_eeh_reset() Gavin Shan
2015-06-04  6:41 ` [PATCH v5 28/42] powerpc/powernv: Don't cover root bus in pnv_pci_reset_secondary_bus() Gavin Shan
2015-06-04  6:41 ` [PATCH v5 29/42] powerpc/powernv: Issue fundamental reset " Gavin Shan
2015-06-04  6:41 ` [PATCH v5 30/42] powerpc/pci: Don't scan empty slot Gavin Shan
2015-06-04  6:42 ` [PATCH v5 31/42] powerpc/pci: Move pcibios_find_pci_bus() around Gavin Shan
2015-06-05 19:47   ` Bjorn Helgaas
2015-06-09  6:10     ` Gavin Shan
2015-06-04  6:42 ` [PATCH v5 32/42] powerpc/powernv: Introduce pnv_pci_poll() Gavin Shan
2015-06-04  6:42 ` [PATCH v5 33/42] powerpc/powernv: Functions to get/reset PCI slot status Gavin Shan
2015-06-04  6:42 ` [PATCH v5 35/42] powerpc/pci: Create eeh_dev while creating pci_dn Gavin Shan
2015-06-04  6:42 ` [PATCH v5 37/42] powerpc/pci: Update bridge windows on PCI plugging Gavin Shan
2015-06-04  6:42 ` [PATCH v5 38/42] powerpc/powernv: Select OF_OVERLAY Gavin Shan
2015-06-04  6:42 ` [PATCH v5 40/42] drivers/of: Allow to specify root node in of_fdt_unflatten_tree() Gavin Shan
2015-06-04 22:10   ` Rob Herring
     [not found]   ` <1433400131-18429-41-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2015-06-30 18:06     ` Grant Likely
2015-06-30 18:06       ` Grant Likely
     [not found]       ` <20150630180652.198E2C4063C-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2015-06-30 21:46         ` Benjamin Herrenschmidt
2015-06-30 21:46           ` Benjamin Herrenschmidt
2015-06-04  6:42 ` [PATCH v5 41/42] drivers/of: Return allocated memory chunk from of_fdt_unflatten_tree() Gavin Shan
2015-06-04  6:42 ` [PATCH v5 42/42] pci/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan
     [not found]   ` <1433400131-18429-43-git-send-email-gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2015-06-05 20:11     ` Bjorn Helgaas
2015-06-05 20:11       ` Bjorn Helgaas
     [not found]       ` <20150605201110.GP3631-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
2015-06-05 20:18         ` Benjamin Herrenschmidt
2015-06-05 20:18           ` Benjamin Herrenschmidt
2015-06-09  6:10           ` Gavin Shan
2015-06-09  6:08       ` Gavin Shan
2015-06-30 18:18   ` Grant Likely
2015-06-30 18:18     ` Grant Likely
2015-07-01  0:51     ` Gavin Shan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433400131-18429-24-git-send-email-gwshan@linux.vnet.ibm.com \
    --to=gwshan@linux.vnet.ibm.com \
    --cc=aik@ozlabs.ru \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=grant.likely@linaro.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=panto@antoniou-consulting.com \
    --cc=robherring2@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.