[PATCH 1/3] drm/panel: add s6e63j0x03 LCD panel driver

From: Hyungwon Hwang <human.hwang@samsung.com>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: sw0312.kim@samsung.com
Subject: [PATCH 1/3] drm/panel: add s6e63j0x03 LCD panel driver
Date: Fri, 12 Jun 2015 21:59:14 +0900	[thread overview]
Message-ID: <1434113958-15877-20-git-send-email-human.hwang@samsung.com> (raw)
In-Reply-To: <1434113958-15877-1-git-send-email-human.hwang@samsung.com>

From: Inki Dae <inki.dae@samsung.com>

This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver
which uses mipi_dsi bus to communicate with panel. The panel has
320×320 resolution in 1.63-inch physical panel. This panel is used in
Samsung Galaxy Gear 2.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 31 +++++++++++++++++++------------
 drivers/gpu/drm/panel/Kconfig           |  6 ++++++
 drivers/gpu/drm/panel/Makefile          |  1 +
 3 files changed, 26 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 5576cc3..6cb4887 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -743,6 +743,14 @@ static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
 	DSI_WRITE(dsi, DSIM_PLLCTRL_REG, reg);
 }
 
+static void exynos_dsi_enable_lane(struct exynos_dsi *dsi, u32 lane)
+{
+	u32 reg = DSI_READ(dsi, DSIM_CONFIG_REG);
+	reg |= (DSIM_NUM_OF_DATA_LANE(dsi->lanes - 1) | DSIM_LANE_EN_CLK |
+			DSIM_LANE_EN(lane));
+	DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
+}
+
 static int exynos_dsi_init_link(struct exynos_dsi *dsi)
 {
 	struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
@@ -815,17 +823,6 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
 		return -EINVAL;
 	}
 
-	reg |= DSIM_NUM_OF_DATA_LANE(dsi->lanes - 1);
-
-	DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
-
-	reg |= DSIM_LANE_EN_CLK;
-	DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
-
-	lanes_mask = BIT(dsi->lanes) - 1;
-	reg |= DSIM_LANE_EN(lanes_mask);
-	DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
-
 	/*
 	 * Use non-continuous clock mode if the periparal wants and
 	 * host controller supports
@@ -837,8 +834,11 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
 	if (driver_data->has_clklane_stop &&
 			dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
 		reg |= DSIM_CLKLANE_STOP;
-		DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
 	}
+	DSI_WRITE(dsi, DSIM_CONFIG_REG, reg);
+
+	lanes_mask = BIT(dsi->lanes) - 1;
+	exynos_dsi_enable_lane(dsi, lanes_mask);
 
 	/* Check clock and data lane state are stop state */
 	timeout = 100;
@@ -1301,6 +1301,10 @@ static int exynos_dsi_init(struct exynos_dsi *dsi)
 
 	exynos_dsi_reset(dsi);
 	exynos_dsi_enable_irq(dsi);
+
+	if (driver_data->values[RESET_TYPE] == DSIM_FUNCRST)
+		exynos_dsi_enable_lane(dsi, BIT(dsi->lanes) - 1);
+
 	exynos_dsi_enable_clock(dsi);
 	if (driver_data->wait_for_reset)
 		exynos_dsi_wait_for_reset(dsi);
@@ -1893,6 +1897,9 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	dsi->clks = devm_kzalloc(dev,
 			sizeof(*dsi->clks) * dsi->driver_data->num_clks,
 			GFP_KERNEL);
+	if (!dsi->clks)
+		goto err_del_component;
+
 	for (i = 0; i < dsi->driver_data->num_clks; i++) {
 		dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
 		if (IS_ERR(dsi->clks[i])) {
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 6d64c7b..cb07bc6 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -43,4 +43,10 @@ config DRM_PANEL_SHARP_LQ101R1SX01
 	  To compile this driver as a module, choose M here: the module
 	  will be called panel-sharp-lq101r1sx01.
 
+config DRM_PANEL_S6E63J0X03
+	tristate "S6E63J0X03 DSI video mode panel"
+	depends on OF
+	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
 endmenu
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 4b2a043..27b0a90 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
 obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
+obj-$(CONFIG_DRM_PANEL_S6E63J0X03) += panel-s6e63j0x03.o
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
