[PATCH v4 8/8] ARM: shmobile: lager: Enable UHS-I SDR-50

From: Ben Hutchings <ben.hutchings@codethink.co.uk>
To: Ian Molton <ian@mnementh.co.uk>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-mmc@vger.kernel.org, linux-sh@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-kernel@lists.codethink.co.uk,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	Simon Horman <horms@verge.net.au>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Subject: [PATCH v4 8/8] ARM: shmobile: lager: Enable UHS-I SDR-50
Date: Tue, 30 Jun 2015 16:57:27 +0000	[thread overview]
Message-ID: <1435683447.23818.70.camel@codethink.co.uk> (raw)
In-Reply-To: <1435683177.23818.60.camel@codethink.co.uk>

Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,2}.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index aaa4f258e279..c14c416b6704 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -312,11 +312,25 @@
 	sdhi0_pins: sd0 {
 		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
 		renesas,function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_1v8: sd0_1v8 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+		power-source = <1800>;
 	};
 
 	sdhi2_pins: sd2 {
 		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
 		renesas,function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_1v8: sd2_1v8 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+		power-source = <1800>;
 	};
 
 	mmc1_pins: mmc1 {
@@ -486,21 +500,25 @@
 
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi0_pins_1v8>;
+	pinctrl-names = "default", "1v8";
 
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
 &sdhi2 {
 	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi2_pins_1v8>;
+	pinctrl-names = "default", "1v8";
 
 	vmmc-supply = <&vcc_sdhi2>;
 	vqmmc-supply = <&vccq_sdhi2>;
 	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
-- 
2.1.4



