All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <bhelgaas@google.com>, <linux-omap@vger.kernel.org>,
	<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <nsekhar@ti.com>, <kishon@ti.com>
Subject: [PATCH v2 3/3] PCI: host: pci-dra7xx: Idle the module by disabling MSE bit
Date: Fri, 24 Jul 2015 17:23:10 +0530	[thread overview]
Message-ID: <1437738790-11114-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1437738790-11114-1-git-send-email-kishon@ti.com>

DRA7xx require MSE bit to be cleared to set the master in
standby mode. (In DRA7xx TRM_vE, section 24.9.4.5.2.2.1 PCIe
Controller Master Standby Behavior advises to use the clearing
of the local MSE bit to set the master in standby. Without this
some of the clocks do not idle).

Cleared the MSE bit on suspend and enabled it back on resume.
Clearing MSE bit is required to get clocks to be idled after
suspend.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 drivers/pci/host/pci-dra7xx.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index d3ee2ef..7e798e8 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -83,6 +83,17 @@ static inline void dra7xx_pcie_writel(struct dra7xx_pcie *pcie, u32 offset,
 	writel(value, pcie->base + offset);
 }
 
+static inline u32 dra7xx_pcie_readl_rc(struct pcie_port *pp, u32 offset)
+{
+	return readl(pp->dbi_base + offset);
+}
+
+static inline void dra7xx_pcie_writel_rc(struct pcie_port *pp, u32 offset,
+					 u32 value)
+{
+	writel(value, pp->dbi_base + offset);
+}
+
 static int dra7xx_pcie_link_up(struct pcie_port *pp)
 {
 	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
@@ -438,8 +449,12 @@ static int dra7xx_pcie_suspend(struct device *dev)
 {
 	struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
 	struct pcie_port *pp = &dra7xx->pp;
+	u32 val;
 
-	dw_pcie_suspend_rc(pp);
+	/* clear MSE */
+	val = dra7xx_pcie_readl_rc(pp, PCI_COMMAND);
+	val &= ~PCI_COMMAND_MEMORY;
+	dra7xx_pcie_writel_rc(pp, PCI_COMMAND, val);
 
 	return 0;
 }
@@ -448,8 +463,12 @@ static int dra7xx_pcie_resume(struct device *dev)
 {
 	struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
 	struct pcie_port *pp = &dra7xx->pp;
+	u32 val;
 
-	dw_pcie_resume_rc(pp);
+	/* clear MSE */
+	val = dra7xx_pcie_readl_rc(pp, PCI_COMMAND);
+	val |= PCI_COMMAND_MEMORY;
+	dra7xx_pcie_writel_rc(pp, PCI_COMMAND, val);
 
 	return 0;
 }
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: bhelgaas@google.com, linux-omap@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: nsekhar@ti.com, kishon@ti.com
Subject: [PATCH v2 3/3] PCI: host: pci-dra7xx: Idle the module by disabling MSE bit
Date: Fri, 24 Jul 2015 17:23:10 +0530	[thread overview]
Message-ID: <1437738790-11114-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1437738790-11114-1-git-send-email-kishon@ti.com>

DRA7xx require MSE bit to be cleared to set the master in
standby mode. (In DRA7xx TRM_vE, section 24.9.4.5.2.2.1 PCIe
Controller Master Standby Behavior advises to use the clearing
of the local MSE bit to set the master in standby. Without this
some of the clocks do not idle).

Cleared the MSE bit on suspend and enabled it back on resume.
Clearing MSE bit is required to get clocks to be idled after
suspend.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 drivers/pci/host/pci-dra7xx.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index d3ee2ef..7e798e8 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -83,6 +83,17 @@ static inline void dra7xx_pcie_writel(struct dra7xx_pcie *pcie, u32 offset,
 	writel(value, pcie->base + offset);
 }
 
+static inline u32 dra7xx_pcie_readl_rc(struct pcie_port *pp, u32 offset)
+{
+	return readl(pp->dbi_base + offset);
+}
+
+static inline void dra7xx_pcie_writel_rc(struct pcie_port *pp, u32 offset,
+					 u32 value)
+{
+	writel(value, pp->dbi_base + offset);
+}
+
 static int dra7xx_pcie_link_up(struct pcie_port *pp)
 {
 	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
@@ -438,8 +449,12 @@ static int dra7xx_pcie_suspend(struct device *dev)
 {
 	struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
 	struct pcie_port *pp = &dra7xx->pp;
+	u32 val;
 
-	dw_pcie_suspend_rc(pp);
+	/* clear MSE */
+	val = dra7xx_pcie_readl_rc(pp, PCI_COMMAND);
+	val &= ~PCI_COMMAND_MEMORY;
+	dra7xx_pcie_writel_rc(pp, PCI_COMMAND, val);
 
 	return 0;
 }
@@ -448,8 +463,12 @@ static int dra7xx_pcie_resume(struct device *dev)
 {
 	struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
 	struct pcie_port *pp = &dra7xx->pp;
+	u32 val;
 
-	dw_pcie_resume_rc(pp);
+	/* clear MSE */
+	val = dra7xx_pcie_readl_rc(pp, PCI_COMMAND);
+	val |= PCI_COMMAND_MEMORY;
+	dra7xx_pcie_writel_rc(pp, PCI_COMMAND, val);
 
 	return 0;
 }
-- 
1.7.9.5

  parent reply	other threads:[~2015-07-24 11:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-24 11:53 [PATCH v2 0/3] dra7xx: Add PM support to PCIe Kishon Vijay Abraham I
2015-07-24 11:53 ` Kishon Vijay Abraham I
2015-07-24 11:53 ` [PATCH v2 1/3] PCI: host: pci-dra7xx: Disable pm_runtime on get_sync failure Kishon Vijay Abraham I
2015-07-24 11:53   ` Kishon Vijay Abraham I
2015-07-24 11:53 ` [PATCH v2 2/3] PCI: host: pci-dra7xx: add pm support to pci dra7xx Kishon Vijay Abraham I
2015-07-24 11:53   ` Kishon Vijay Abraham I
2015-07-24 11:53 ` Kishon Vijay Abraham I [this message]
2015-07-24 11:53   ` [PATCH v2 3/3] PCI: host: pci-dra7xx: Idle the module by disabling MSE bit Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437738790-11114-4-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=nsekhar@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.