From: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
To: linux-doc@vger.kernel.org
Cc: Randy Dunlap <rdunlap@infradead.org>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Jonathan Corbet <corbet@lwn.net>,
Herbert Xu <herbert@gondor.apana.org.au>,
Stephan Mueller <smueller@chronox.de>,
Michal Marek <mmarek@suse.cz>,
linux-kernel@vger.kernel.org,
intel-gfx <intel-gfx@lists.freedesktop.org>,
dri-devel <dri-devel@lists.freedesktop.org>,
Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Subject: [PATCH v2 4/4] drm/doc: Convert to markdown
Date: Tue, 28 Jul 2015 16:45:18 -0300 [thread overview]
Message-ID: <1438112718-12168-5-git-send-email-danilo.cesar@collabora.co.uk> (raw)
In-Reply-To: <1438112718-12168-1-git-send-email-danilo.cesar@collabora.co.uk>
DRM Docbook is now Markdown ready. This means its doc is able to
use markdown text on it.
* Documentation/DocBook/drm.tmpl: Contains a table duplicated from
drivers/gpu/drm/i915/i915_reg.h. This is not needed anymore
* drivers/gpu/drm/drm_modeset_lock.c: had a code example that used
to look pretty bad on html. Fixed by using proper code markup.
* drivers/gpu/drm/drm_prime.c: Remove spaces between lines to make
a proper markup list.
* drivers/gpu/drm/i915/i915_reg.h: Altought pandoc supports tables,
it doesn't support table cell spanning. But we can use fixed-width
for those special cases.
* include/drm/drm_vma_manager.h: Another code example that should be
proper indented with four spaces.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
---
Changelog:
v2:
* Improve markup in drivers/gpu/drm/drm_modes.c
Documentation/DocBook/Makefile | 2 +-
Documentation/DocBook/drm.tmpl | 86 --------------------------------------
drivers/gpu/drm/drm_modes.c | 12 +++---
drivers/gpu/drm/drm_modeset_lock.c | 14 +++----
drivers/gpu/drm/drm_prime.c | 16 +++----
drivers/gpu/drm/i915/i915_reg.h | 48 ++++++++++-----------
include/drm/drm_vma_manager.h | 10 ++---
7 files changed, 48 insertions(+), 140 deletions(-)
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 8e6d022..f2408b3 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -17,7 +17,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
tracepoint.xml drm.xml media_api.xml w1.xml \
writing_musb_glue_layer.xml crypto-API.xml
-MARKDOWNREADY :=
+MARKDOWNREADY := drm.xml
include Documentation/DocBook/media/Makefile
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 2fb9a54..4fb4636 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -4073,92 +4073,6 @@ int num_ioctls;</synopsis>
<sect2>
<title>DPIO</title>
!Pdrivers/gpu/drm/i915/i915_reg.h DPIO
- <table id="dpiox2">
- <title>Dual channel PHY (VLV/CHV/BXT)</title>
- <tgroup cols="8">
- <colspec colname="c0" />
- <colspec colname="c1" />
- <colspec colname="c2" />
- <colspec colname="c3" />
- <colspec colname="c4" />
- <colspec colname="c5" />
- <colspec colname="c6" />
- <colspec colname="c7" />
- <spanspec spanname="ch0" namest="c0" nameend="c3" />
- <spanspec spanname="ch1" namest="c4" nameend="c7" />
- <spanspec spanname="ch0pcs01" namest="c0" nameend="c1" />
- <spanspec spanname="ch0pcs23" namest="c2" nameend="c3" />
- <spanspec spanname="ch1pcs01" namest="c4" nameend="c5" />
- <spanspec spanname="ch1pcs23" namest="c6" nameend="c7" />
- <thead>
- <row>
- <entry spanname="ch0">CH0</entry>
- <entry spanname="ch1">CH1</entry>
- </row>
- </thead>
- <tbody valign="top" align="center">
- <row>
- <entry spanname="ch0">CMN/PLL/REF</entry>
- <entry spanname="ch1">CMN/PLL/REF</entry>
- </row>
- <row>
- <entry spanname="ch0pcs01">PCS01</entry>
- <entry spanname="ch0pcs23">PCS23</entry>
- <entry spanname="ch1pcs01">PCS01</entry>
- <entry spanname="ch1pcs23">PCS23</entry>
- </row>
- <row>
- <entry>TX0</entry>
- <entry>TX1</entry>
- <entry>TX2</entry>
- <entry>TX3</entry>
- <entry>TX0</entry>
- <entry>TX1</entry>
- <entry>TX2</entry>
- <entry>TX3</entry>
- </row>
- <row>
- <entry spanname="ch0">DDI0</entry>
- <entry spanname="ch1">DDI1</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
- <table id="dpiox1">
- <title>Single channel PHY (CHV/BXT)</title>
- <tgroup cols="4">
- <colspec colname="c0" />
- <colspec colname="c1" />
- <colspec colname="c2" />
- <colspec colname="c3" />
- <spanspec spanname="ch0" namest="c0" nameend="c3" />
- <spanspec spanname="ch0pcs01" namest="c0" nameend="c1" />
- <spanspec spanname="ch0pcs23" namest="c2" nameend="c3" />
- <thead>
- <row>
- <entry spanname="ch0">CH0</entry>
- </row>
- </thead>
- <tbody valign="top" align="center">
- <row>
- <entry spanname="ch0">CMN/PLL/REF</entry>
- </row>
- <row>
- <entry spanname="ch0pcs01">PCS01</entry>
- <entry spanname="ch0pcs23">PCS23</entry>
- </row>
- <row>
- <entry>TX0</entry>
- <entry>TX1</entry>
- <entry>TX2</entry>
- <entry>TX3</entry>
- </row>
- <row>
- <entry spanname="ch0">DDI2</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
</sect2>
<sect2>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index cd74a09..9480464 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -553,10 +553,10 @@ EXPORT_SYMBOL(drm_gtf_mode_complex);
* drivers/video/fbmon.c
*
* Standard GTF parameters:
- * M = 600
- * C = 40
- * K = 128
- * J = 20
+ * M = 600
+ * C = 40
+ * K = 128
+ * J = 20
*
* Returns:
* The modeline based on the GTF algorithm stored in a drm_display_mode object.
@@ -1212,7 +1212,7 @@ EXPORT_SYMBOL(drm_mode_connector_list_update);
* This uses the same parameters as the fb modedb.c, except for an extra
* force-enable, force-enable-digital and force-disable bit at the end:
*
- * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
+ * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
*
* The intermediate drm_cmdline_mode structure is required to store additional
* options from the command line modline like the force-enable/disable flag.
@@ -1491,4 +1491,4 @@ int drm_mode_convert_umode(struct drm_display_mode *out,
out:
return ret;
-}
\ No newline at end of file
+}
diff --git a/drivers/gpu/drm/drm_modeset_lock.c b/drivers/gpu/drm/drm_modeset_lock.c
index c0a5cd8..de59b0c 100644
--- a/drivers/gpu/drm/drm_modeset_lock.c
+++ b/drivers/gpu/drm/drm_modeset_lock.c
@@ -40,17 +40,15 @@
* The basic usage pattern is to:
*
* drm_modeset_acquire_init(&ctx)
- * retry:
+ * retry:
* foreach (lock in random_ordered_set_of_locks) {
- * ret = drm_modeset_lock(lock, &ctx)
- * if (ret == -EDEADLK) {
- * drm_modeset_backoff(&ctx);
- * goto retry;
- * }
+ * ret = drm_modeset_lock(lock, &ctx)
+ * if (ret == -EDEADLK) {
+ * drm_modeset_backoff(&ctx);
+ * goto retry;
+ * }
* }
- *
* ... do stuff ...
- *
* drm_modeset_drop_locks(&ctx);
* drm_modeset_acquire_fini(&ctx);
*/
diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
index 9f935f5..27aa718 100644
--- a/drivers/gpu/drm/drm_prime.c
+++ b/drivers/gpu/drm/drm_prime.c
@@ -313,19 +313,15 @@ static const struct dma_buf_ops drm_gem_prime_dmabuf_ops = {
*
* Export callbacks:
*
- * - @gem_prime_pin (optional): prepare a GEM object for exporting
- *
- * - @gem_prime_get_sg_table: provide a scatter/gather table of pinned pages
- *
- * - @gem_prime_vmap: vmap a buffer exported by your driver
- *
- * - @gem_prime_vunmap: vunmap a buffer exported by your driver
- *
- * - @gem_prime_mmap (optional): mmap a buffer exported by your driver
+ * * @gem_prime_pin (optional): prepare a GEM object for exporting
+ * * @gem_prime_get_sg_table: provide a scatter/gather table of pinned pages
+ * * @gem_prime_vmap: vmap a buffer exported by your driver
+ * * @gem_prime_vunmap: vunmap a buffer exported by your driver
+ * * @gem_prime_mmap (optional): mmap a buffer exported by your driver
*
* Import callback:
*
- * - @gem_prime_import_sg_table (import): produce a GEM object from another
+ * * @gem_prime_import_sg_table (import): produce a GEM object from another
* driver's scatter/gather table
*/
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2030f60..07c757c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -778,31 +778,31 @@ enum skl_disp_power_wells {
*
* Note: DDI0 is digital port B, DD1 is digital port C, and DDI2 is
* digital port D (CHV) or port A (BXT).
- */
-/*
- * Dual channel PHY (VLV/CHV/BXT)
- * ---------------------------------
- * | CH0 | CH1 |
- * | CMN/PLL/REF | CMN/PLL/REF |
- * |---------------|---------------| Display PHY
- * | PCS01 | PCS23 | PCS01 | PCS23 |
- * |-------|-------|-------|-------|
- * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3|
- * ---------------------------------
- * | DDI0 | DDI1 | DP/HDMI ports
- * ---------------------------------
*
- * Single channel PHY (CHV/BXT)
- * -----------------
- * | CH0 |
- * | CMN/PLL/REF |
- * |---------------| Display PHY
- * | PCS01 | PCS23 |
- * |-------|-------|
- * |TX0|TX1|TX2|TX3|
- * -----------------
- * | DDI2 | DP/HDMI port
- * -----------------
+ *
+ * Dual channel PHY (VLV/CHV/BXT)
+ * ---------------------------------
+ * | CH0 | CH1 |
+ * | CMN/PLL/REF | CMN/PLL/REF |
+ * |---------------|---------------| Display PHY
+ * | PCS01 | PCS23 | PCS01 | PCS23 |
+ * |-------|-------|-------|-------|
+ * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3|
+ * ---------------------------------
+ * | DDI0 | DDI1 | DP/HDMI ports
+ * ---------------------------------
+ *
+ * Single channel PHY (CHV/BXT)
+ * -----------------
+ * | CH0 |
+ * | CMN/PLL/REF |
+ * |---------------| Display PHY
+ * | PCS01 | PCS23 |
+ * |-------|-------|
+ * |TX0|TX1|TX2|TX3|
+ * -----------------
+ * | DDI2 | DP/HDMI port
+ * -----------------
*/
#define DPIO_DEVFN 0
diff --git a/include/drm/drm_vma_manager.h b/include/drm/drm_vma_manager.h
index 8cd402c..2ca44db 100644
--- a/include/drm/drm_vma_manager.h
+++ b/include/drm/drm_vma_manager.h
@@ -110,11 +110,11 @@ drm_vma_offset_exact_lookup(struct drm_vma_offset_manager *mgr,
* Note: You're in atomic-context while holding this lock!
*
* Example:
- * drm_vma_offset_lock_lookup(mgr);
- * node = drm_vma_offset_lookup_locked(mgr);
- * if (node)
- * kref_get_unless_zero(container_of(node, sth, entr));
- * drm_vma_offset_unlock_lookup(mgr);
+ * drm_vma_offset_lock_lookup(mgr);
+ * node = drm_vma_offset_lookup_locked(mgr);
+ * if (node)
+ * kref_get_unless_zero(container_of(node, sth, entr));
+ * drm_vma_offset_unlock_lookup(mgr);
*/
static inline void drm_vma_offset_lock_lookup(struct drm_vma_offset_manager *mgr)
{
--
2.4.6
WARNING: multiple messages have this Message-ID (diff)
From: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
To: linux-doc@vger.kernel.org
Cc: Michal Marek <mmarek@suse.cz>,
Herbert Xu <herbert@gondor.apana.org.au>,
Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>,
Jonathan Corbet <corbet@lwn.net>,
Stephan Mueller <smueller@chronox.de>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
intel-gfx <intel-gfx@lists.freedesktop.org>,
Randy Dunlap <rdunlap@infradead.org>,
linux-kernel@vger.kernel.org,
dri-devel <dri-devel@lists.freedesktop.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH v2 4/4] drm/doc: Convert to markdown
Date: Tue, 28 Jul 2015 16:45:18 -0300 [thread overview]
Message-ID: <1438112718-12168-5-git-send-email-danilo.cesar@collabora.co.uk> (raw)
In-Reply-To: <1438112718-12168-1-git-send-email-danilo.cesar@collabora.co.uk>
DRM Docbook is now Markdown ready. This means its doc is able to
use markdown text on it.
* Documentation/DocBook/drm.tmpl: Contains a table duplicated from
drivers/gpu/drm/i915/i915_reg.h. This is not needed anymore
* drivers/gpu/drm/drm_modeset_lock.c: had a code example that used
to look pretty bad on html. Fixed by using proper code markup.
* drivers/gpu/drm/drm_prime.c: Remove spaces between lines to make
a proper markup list.
* drivers/gpu/drm/i915/i915_reg.h: Altought pandoc supports tables,
it doesn't support table cell spanning. But we can use fixed-width
for those special cases.
* include/drm/drm_vma_manager.h: Another code example that should be
proper indented with four spaces.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
---
Changelog:
v2:
* Improve markup in drivers/gpu/drm/drm_modes.c
Documentation/DocBook/Makefile | 2 +-
Documentation/DocBook/drm.tmpl | 86 --------------------------------------
drivers/gpu/drm/drm_modes.c | 12 +++---
drivers/gpu/drm/drm_modeset_lock.c | 14 +++----
drivers/gpu/drm/drm_prime.c | 16 +++----
drivers/gpu/drm/i915/i915_reg.h | 48 ++++++++++-----------
include/drm/drm_vma_manager.h | 10 ++---
7 files changed, 48 insertions(+), 140 deletions(-)
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 8e6d022..f2408b3 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -17,7 +17,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
tracepoint.xml drm.xml media_api.xml w1.xml \
writing_musb_glue_layer.xml crypto-API.xml
-MARKDOWNREADY :=
+MARKDOWNREADY := drm.xml
include Documentation/DocBook/media/Makefile
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 2fb9a54..4fb4636 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -4073,92 +4073,6 @@ int num_ioctls;</synopsis>
<sect2>
<title>DPIO</title>
!Pdrivers/gpu/drm/i915/i915_reg.h DPIO
- <table id="dpiox2">
- <title>Dual channel PHY (VLV/CHV/BXT)</title>
- <tgroup cols="8">
- <colspec colname="c0" />
- <colspec colname="c1" />
- <colspec colname="c2" />
- <colspec colname="c3" />
- <colspec colname="c4" />
- <colspec colname="c5" />
- <colspec colname="c6" />
- <colspec colname="c7" />
- <spanspec spanname="ch0" namest="c0" nameend="c3" />
- <spanspec spanname="ch1" namest="c4" nameend="c7" />
- <spanspec spanname="ch0pcs01" namest="c0" nameend="c1" />
- <spanspec spanname="ch0pcs23" namest="c2" nameend="c3" />
- <spanspec spanname="ch1pcs01" namest="c4" nameend="c5" />
- <spanspec spanname="ch1pcs23" namest="c6" nameend="c7" />
- <thead>
- <row>
- <entry spanname="ch0">CH0</entry>
- <entry spanname="ch1">CH1</entry>
- </row>
- </thead>
- <tbody valign="top" align="center">
- <row>
- <entry spanname="ch0">CMN/PLL/REF</entry>
- <entry spanname="ch1">CMN/PLL/REF</entry>
- </row>
- <row>
- <entry spanname="ch0pcs01">PCS01</entry>
- <entry spanname="ch0pcs23">PCS23</entry>
- <entry spanname="ch1pcs01">PCS01</entry>
- <entry spanname="ch1pcs23">PCS23</entry>
- </row>
- <row>
- <entry>TX0</entry>
- <entry>TX1</entry>
- <entry>TX2</entry>
- <entry>TX3</entry>
- <entry>TX0</entry>
- <entry>TX1</entry>
- <entry>TX2</entry>
- <entry>TX3</entry>
- </row>
- <row>
- <entry spanname="ch0">DDI0</entry>
- <entry spanname="ch1">DDI1</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
- <table id="dpiox1">
- <title>Single channel PHY (CHV/BXT)</title>
- <tgroup cols="4">
- <colspec colname="c0" />
- <colspec colname="c1" />
- <colspec colname="c2" />
- <colspec colname="c3" />
- <spanspec spanname="ch0" namest="c0" nameend="c3" />
- <spanspec spanname="ch0pcs01" namest="c0" nameend="c1" />
- <spanspec spanname="ch0pcs23" namest="c2" nameend="c3" />
- <thead>
- <row>
- <entry spanname="ch0">CH0</entry>
- </row>
- </thead>
- <tbody valign="top" align="center">
- <row>
- <entry spanname="ch0">CMN/PLL/REF</entry>
- </row>
- <row>
- <entry spanname="ch0pcs01">PCS01</entry>
- <entry spanname="ch0pcs23">PCS23</entry>
- </row>
- <row>
- <entry>TX0</entry>
- <entry>TX1</entry>
- <entry>TX2</entry>
- <entry>TX3</entry>
- </row>
- <row>
- <entry spanname="ch0">DDI2</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
</sect2>
<sect2>
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index cd74a09..9480464 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -553,10 +553,10 @@ EXPORT_SYMBOL(drm_gtf_mode_complex);
* drivers/video/fbmon.c
*
* Standard GTF parameters:
- * M = 600
- * C = 40
- * K = 128
- * J = 20
+ * M = 600
+ * C = 40
+ * K = 128
+ * J = 20
*
* Returns:
* The modeline based on the GTF algorithm stored in a drm_display_mode object.
@@ -1212,7 +1212,7 @@ EXPORT_SYMBOL(drm_mode_connector_list_update);
* This uses the same parameters as the fb modedb.c, except for an extra
* force-enable, force-enable-digital and force-disable bit at the end:
*
- * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
+ * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
*
* The intermediate drm_cmdline_mode structure is required to store additional
* options from the command line modline like the force-enable/disable flag.
@@ -1491,4 +1491,4 @@ int drm_mode_convert_umode(struct drm_display_mode *out,
out:
return ret;
-}
\ No newline at end of file
+}
diff --git a/drivers/gpu/drm/drm_modeset_lock.c b/drivers/gpu/drm/drm_modeset_lock.c
index c0a5cd8..de59b0c 100644
--- a/drivers/gpu/drm/drm_modeset_lock.c
+++ b/drivers/gpu/drm/drm_modeset_lock.c
@@ -40,17 +40,15 @@
* The basic usage pattern is to:
*
* drm_modeset_acquire_init(&ctx)
- * retry:
+ * retry:
* foreach (lock in random_ordered_set_of_locks) {
- * ret = drm_modeset_lock(lock, &ctx)
- * if (ret == -EDEADLK) {
- * drm_modeset_backoff(&ctx);
- * goto retry;
- * }
+ * ret = drm_modeset_lock(lock, &ctx)
+ * if (ret == -EDEADLK) {
+ * drm_modeset_backoff(&ctx);
+ * goto retry;
+ * }
* }
- *
* ... do stuff ...
- *
* drm_modeset_drop_locks(&ctx);
* drm_modeset_acquire_fini(&ctx);
*/
diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
index 9f935f5..27aa718 100644
--- a/drivers/gpu/drm/drm_prime.c
+++ b/drivers/gpu/drm/drm_prime.c
@@ -313,19 +313,15 @@ static const struct dma_buf_ops drm_gem_prime_dmabuf_ops = {
*
* Export callbacks:
*
- * - @gem_prime_pin (optional): prepare a GEM object for exporting
- *
- * - @gem_prime_get_sg_table: provide a scatter/gather table of pinned pages
- *
- * - @gem_prime_vmap: vmap a buffer exported by your driver
- *
- * - @gem_prime_vunmap: vunmap a buffer exported by your driver
- *
- * - @gem_prime_mmap (optional): mmap a buffer exported by your driver
+ * * @gem_prime_pin (optional): prepare a GEM object for exporting
+ * * @gem_prime_get_sg_table: provide a scatter/gather table of pinned pages
+ * * @gem_prime_vmap: vmap a buffer exported by your driver
+ * * @gem_prime_vunmap: vunmap a buffer exported by your driver
+ * * @gem_prime_mmap (optional): mmap a buffer exported by your driver
*
* Import callback:
*
- * - @gem_prime_import_sg_table (import): produce a GEM object from another
+ * * @gem_prime_import_sg_table (import): produce a GEM object from another
* driver's scatter/gather table
*/
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2030f60..07c757c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -778,31 +778,31 @@ enum skl_disp_power_wells {
*
* Note: DDI0 is digital port B, DD1 is digital port C, and DDI2 is
* digital port D (CHV) or port A (BXT).
- */
-/*
- * Dual channel PHY (VLV/CHV/BXT)
- * ---------------------------------
- * | CH0 | CH1 |
- * | CMN/PLL/REF | CMN/PLL/REF |
- * |---------------|---------------| Display PHY
- * | PCS01 | PCS23 | PCS01 | PCS23 |
- * |-------|-------|-------|-------|
- * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3|
- * ---------------------------------
- * | DDI0 | DDI1 | DP/HDMI ports
- * ---------------------------------
*
- * Single channel PHY (CHV/BXT)
- * -----------------
- * | CH0 |
- * | CMN/PLL/REF |
- * |---------------| Display PHY
- * | PCS01 | PCS23 |
- * |-------|-------|
- * |TX0|TX1|TX2|TX3|
- * -----------------
- * | DDI2 | DP/HDMI port
- * -----------------
+ *
+ * Dual channel PHY (VLV/CHV/BXT)
+ * ---------------------------------
+ * | CH0 | CH1 |
+ * | CMN/PLL/REF | CMN/PLL/REF |
+ * |---------------|---------------| Display PHY
+ * | PCS01 | PCS23 | PCS01 | PCS23 |
+ * |-------|-------|-------|-------|
+ * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3|
+ * ---------------------------------
+ * | DDI0 | DDI1 | DP/HDMI ports
+ * ---------------------------------
+ *
+ * Single channel PHY (CHV/BXT)
+ * -----------------
+ * | CH0 |
+ * | CMN/PLL/REF |
+ * |---------------| Display PHY
+ * | PCS01 | PCS23 |
+ * |-------|-------|
+ * |TX0|TX1|TX2|TX3|
+ * -----------------
+ * | DDI2 | DP/HDMI port
+ * -----------------
*/
#define DPIO_DEVFN 0
diff --git a/include/drm/drm_vma_manager.h b/include/drm/drm_vma_manager.h
index 8cd402c..2ca44db 100644
--- a/include/drm/drm_vma_manager.h
+++ b/include/drm/drm_vma_manager.h
@@ -110,11 +110,11 @@ drm_vma_offset_exact_lookup(struct drm_vma_offset_manager *mgr,
* Note: You're in atomic-context while holding this lock!
*
* Example:
- * drm_vma_offset_lock_lookup(mgr);
- * node = drm_vma_offset_lookup_locked(mgr);
- * if (node)
- * kref_get_unless_zero(container_of(node, sth, entr));
- * drm_vma_offset_unlock_lookup(mgr);
+ * drm_vma_offset_lock_lookup(mgr);
+ * node = drm_vma_offset_lookup_locked(mgr);
+ * if (node)
+ * kref_get_unless_zero(container_of(node, sth, entr));
+ * drm_vma_offset_unlock_lookup(mgr);
*/
static inline void drm_vma_offset_lock_lookup(struct drm_vma_offset_manager *mgr)
{
--
2.4.6
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-07-28 19:46 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-23 18:16 [PATCH 0/4] Add support for Hyperlinks and Markup on kernel-doc Danilo Cesar Lemes de Paula
2015-07-23 18:16 ` [PATCH 1/4] scripts/kernel-doc: Adding cross-reference links to html documentation Danilo Cesar Lemes de Paula
2015-07-23 18:16 ` [PATCH 2/4] scripts/kernel-doc: Replacing highlights hash by an array Danilo Cesar Lemes de Paula
2015-07-23 18:16 ` Danilo Cesar Lemes de Paula
2015-07-23 18:16 ` [PATCH 3/4] scripts/kernel-doc: Adding infrastructure for markdown support Danilo Cesar Lemes de Paula
2015-07-23 18:16 ` Danilo Cesar Lemes de Paula
2015-07-23 18:16 ` [PATCH 4/4] drm/doc: Convert to markdown Danilo Cesar Lemes de Paula
2015-07-23 18:16 ` Danilo Cesar Lemes de Paula
2015-07-23 20:29 ` [PATCH 0/4] Add support for Hyperlinks and Markup on kernel-doc Jonathan Corbet
2015-08-13 23:09 ` Danilo Cesar Lemes de Paula
2015-08-13 23:20 ` Jonathan Corbet
2015-08-14 17:26 ` Danilo Cesar Lemes de Paula
2015-08-14 17:26 ` Danilo Cesar Lemes de Paula
2015-07-25 10:20 ` Stephan Mueller
2015-07-28 19:12 ` Danilo Cesar Lemes de Paula
2015-07-28 19:45 ` [PATCH v2 " Danilo Cesar Lemes de Paula
2015-07-28 19:45 ` [PATCH v2 1/4] scripts/kernel-doc: Adding cross-reference links to html documentation Danilo Cesar Lemes de Paula
2015-08-17 4:10 ` Jonathan Corbet
2015-08-17 4:10 ` Jonathan Corbet
2015-08-17 13:06 ` Danilo Cesar Lemes de Paula
2015-07-28 19:45 ` [PATCH v2 2/4] scripts/kernel-doc: Replacing highlights hash by an array Danilo Cesar Lemes de Paula
2015-07-28 19:45 ` Danilo Cesar Lemes de Paula
2015-11-17 10:40 ` Mauro Carvalho Chehab
2015-11-17 10:40 ` Mauro Carvalho Chehab
2015-11-17 14:44 ` Jonathan Corbet
2015-11-17 15:29 ` Mauro Carvalho Chehab
2015-11-17 15:48 ` Danilo Cesar Lemes de Paula
2015-11-17 15:48 ` Danilo Cesar Lemes de Paula
2015-11-18 0:21 ` Jonathan Corbet
2015-11-18 9:14 ` Mauro Carvalho Chehab
2015-11-18 9:14 ` Mauro Carvalho Chehab
2015-07-28 19:45 ` [PATCH v2 3/4] scripts/kernel-doc: Adding infrastructure for markdown support Danilo Cesar Lemes de Paula
2015-07-28 19:45 ` Danilo Cesar Lemes de Paula
2015-07-28 19:45 ` Danilo Cesar Lemes de Paula [this message]
2015-07-28 19:45 ` [PATCH v2 4/4] drm/doc: Convert to markdown Danilo Cesar Lemes de Paula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438112718-12168-5-git-send-email-danilo.cesar@collabora.co.uk \
--to=danilo.cesar@collabora.co.uk \
--cc=corbet@lwn.net \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=herbert@gondor.apana.org.au \
--cc=intel-gfx@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mmarek@suse.cz \
--cc=rdunlap@infradead.org \
--cc=smueller@chronox.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.